BPA for webserver fails, how to troubleshoot

About a week ago I ran an IIS BPA scan from the server manager and had execution failures.
Error
WIN-65BH5OFVDEO : Thread failed to start.
None
BPA scan completed for Web Server (IIS) on server WIN-65BH5OFVDEO.holland.factoryinsite.com.
Error
WIN-65BH5OFVDEO : Thread failed to start.
Error
WIN-65BH5OFVDEO : Exception of type 'System.OutOfMemoryException' was thrown.
Running the scan from power shell gives the following.
PS C:\Users\Administrator> invoke-bpamodel microsoft/windows/webserver
WARNING: Exception calling "GetUserRights" with "1" argument(s): "Arithmetic operation resulted in an overflow."
ModelId           : Microsoft/Windows/WebServer
SubModelId        :
Success           : True
ScanTime          : 2/20/2015 3:18:31 PM
ScanTimeUtcOffset : -05:00:00
Detail            : {WIN-65BH5OFVDEO, WIN-65BH5OFVDEO}
How do I further trace this down and correct the warning?

Edition is Windows Server 2012 Datacenter. We usually keep up with updates, so all of the February updates were installed since I last ran a BPA scan.
A full BPA scan from the Local Server gives the following errors.
None
WIN-65BH5OFVDEO: BPA scan completed for Active Directory Lightweight Directory Services, Network Policy and Access Services, Active Directory Certificate Services, Message Queuing, DNS Server, Active Directory Domain Services, Web Server (IIS), File And
Storage Services, DHCP Server.
2/26/2015 9:08:43 AM
Error
WIN-65BH5OFVDEO: Errors occurred while running BPA scan on Active Directory Lightweight Directory Services, Network Policy and Access Services, Active Directory Certificate Services, Message Queuing, DNS Server, Active Directory Domain Services, Web Server
(IIS), File And Storage Services, DHCP Server.
2/26/2015 9:08:15 AM
Error
WIN-65BH5OFVDEO : Exception of type 'System.OutOfMemoryException' was thrown.
2/26/2015 9:08:15 AM
Error
WIN-65BH5OFVDEO : Thread failed to start.
2/26/2015 9:08:15 AM
Error
WIN-65BH5OFVDEO : Exception of type 'System.OutOfMemoryException' was thrown.
2/26/2015 9:08:15 AM
Error
WIN-65BH5OFVDEO: Errors occurred while running BPA scan on Active Directory Lightweight Directory Services, Network Policy and Access Services, Active Directory Certificate Services, Message Queuing, DNS Server, Active Directory Domain Services, Web Server
(IIS), File And Storage Services, DHCP Server.
2/26/2015 9:08:15 AM
Error
WIN-65BH5OFVDEO: Errors occurred while running BPA scan on Active Directory Lightweight Directory Services, Network Policy and Access Services, Active Directory Certificate Services, Message Queuing, DNS Server, Active Directory Domain Services, Web Server
(IIS), File And Storage Services, DHCP Server.
2/26/2015 9:08:15 AM
There are no errors in the event log around this time and the warnings and informational entries don't seem to have anything to do with the BPA scan.

Similar Messages

In place upgrade Windows 2003 to Windows 2008 R2 fails, how to troubleshoot?

Hello,
I'm upgrading in Below is setuterr.log 2014-07-21 15:44:29, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:47:51, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:53, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:57:06, Error place Windows 2003 R2 to Windows 2008 R2 and upgrades rolls back on it's own with no indication for reasoning.
which is full of errors but I can not figure out which specific one is curlpit. Any ideas?
Number of Enumerated Devices = 6[gle=0x00000103]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=00000002x[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
[0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08071d] MIG Mig::CDownlevelOCStore::AddOCsFromManifests: Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man.: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x0808fe] MIG Plugin {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}: BthMig: Failed to migrate bthport keys, bailing out
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x0803db] MIG IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\sankap\NTUSER.DAT; giving up (2).[gle=0x00000003]

Hi,
Most probably these kind of errors pop up if the drivers are not compatible. Do you find any .dmp files under folder C:\$WINDOWS.~BT\Sources ? If so
open it with debugger and check for the affected .sys file name.
Check the DVD media, or try a different media.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/691bb048-f63f-41fd-a152-e502671fb27e/upgrade-to-from-windows-server-2003-r2-x64-to-windows-server-2008-x64-failed-4-times-so-far?forum=winserverMigration
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Dv6 hard drive failing how do i transferrer os 7 and hp info ??? i have a 500g wd replacement for it

dv6 hard drive failing how do i transferrer os 7 and hp info ??? I have a 500G wd replacement for it.
I have transferrer my self using WD Smart ware and a separate win 7 backed up to a WD 2T external ( win 7 backup is now struggling to back up but I do have one copy)
when new HD was put in, and repair disk put in it wouldn't pick up the back up off the WD 2 T. WIN 7 or my manual backup.
So I loaded up a win 7 32bit (off an older computer which is now parts) but it wouldn't reconis Win 7 back up on the WD 2 T.
Using WD smart ware. I did transferrer all the files over to the new HD but could only make an put it in a new folder. Not reload back to the same as it was before I had to transferrer every thing.
I am know stuck with win 7 32bit can't use all 6G memory an no Hp info on comp .+ no ordinal programs or settings install
there is probably some small thing I have mist thanks for your help

Hi,
Here is a topic which helps you to clone the old HDD:
http://www.makeuseof.com/tag/5-ways-to-clone-and-copy-your-hard-drive/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My Mountain Lion app failed while downloading, and now I can't download it without repaying for it. How can I get my access code to work/download the app?

My Mountain Lion app failed while downloading, and now I can't download it without repaying for it. How can I get my access code to work/download the app?

Welcome to Apple Support Communities
Open App Store, select Account in Quick Links and press Show hidden purchases. If OS X isn't there, http://www.apple.com/support/mac/app-store/contact

How to Troubleshoot iTunes 10.6 Download Failure in Firefox 14.0.1 ??

How to Troubleshoot iTunes 10.6 Download Failure in Firefox 14.0.1 ??
posted Thursday, 02 August 2012 at 07:43AM PDT, by Matthew B. | @QHereKidSF
SIMPLY-PUT !!
I am desperate to know of any possible workaround solutions that might resolve inexplicable failure(s) to download iTunes 10.6 (http://www.apple.com/itunes/download/) in Mozilla Firefox 14.0.1 Browser for Windows 7 (64-bit) OS...!!
FURTHER DETAILED !!
In an aimlessly ill-informed effort to troubleshoot the "Please install Apple Application Support" ERROR Message reported subsequent to my numerous attempts to "repair/install" the most recent and otherwise previously up-to-date versions of Apple QuickTime & iTunes on my HP Pavilion dv4 Entertainment Notebook PC, running on the Windows 7 (64-bit) OS... I mistakenly (perhaps?) thought it wise to attempt to execute a complete uninstall/reinstall of both QuickTime & iTunes. Oops... YIKES !!
Somewhere along the knotty entangled threads of my most circuitous web-research, as I browsed for information and instructional resources regarding proper procedure for (re)-installing Apple Application Support (amongst other peripheral software programs provided by Apple, Inc. as integral technical components essential to seamless & successful installation, application and operation of the most current/up-to-date versions of Apple QuickTime & Apple iTunes), I seem to recall reading explicit suggestions from well-rated community support contributors to proceed with the aforementioned course of action...
Unfortunately, now that I no longer have either Apple QuickTime or iTunes currently installed on my Win7OS HP Pavilion Notebook PC, I continue consistently to fail at initializing either a functional download or installation solely of iTunes 10.6 -- so far!!
When I link to the Apple iTunes 10.6 Download URL (listed herein, above!) and click the (blue) DOWNLOAD NOW Button located near mid-center of the left-sidebar in the presumably appropriate/correct browser tab window (fully framed and immediately visible in maximized view, on my screen), what seems then to occur is pretty much what one could only image/explain &/or describe as "zip/zilch, nothing/nada, absolute silence, stillness: a blatantly obvious failure to initiate functional download of anything at all, whatsoever...!!"
Not a single hint of code or even a mere bleep/beep/blink/blip in my Win7OS or HP Pavilion Monitor Display appears before for me; ultimately, suggesting without any real certainty whatsoever that a download of the iTunes 10.6 Software Installation Package has perhaps initialized, successfully...!!?
WHAT TO DO? What to do? ...ARGGHHH !!
I am desperate to find a workaround solution with which to troubleshoot and ideally resolve these persistent difficulties I continue to encounter when attempting to download iTunes 10.6 via Mozilla Firefox 14.0.1 on the Win7OS (64-bit) of my HP Pavilion dv4 Entertainment Notebook PC!!
Might there possibly be anyone -- anyone, at all!! -- out there, somewhere amidst the knotty entangled nets broadly cast far'cross the endlessly great and expansive waves of this worldwide cyberspace we share, who perhaps would know of a proper workaround fix with which I might troubleshoot my current web-computing technology crisis??
If indeed so, please do come diving face-first forward toward me... with any decent amount of valuably trustworthy information, instruction, advice, guidance, support or even encouragement that you might be readily willing and able to provide!! Please, please...!!?
Any worthwhile, effective assistance that's provided to me (in as short an order as possible) would be most sincerely appreciated & acknowledged widely across the web by me... with resounding cries of humble recognition, admiration, and deeply indebted gratitude!! At least, that's only as much as I can so far surmise to guarantee, at this point -- thus far and so moving forward!!
Yes, indeed...!! That's a promise which I intend to keep; should all issues be resolved well much for and in my favor, as well as much, much sooner rather than far-too much later -- hopefully, even by the end of the coming day; one might say... *sigh* Hehe. WINK/GRIN...
Boy o'boy, now... That sure would delight me to the nth-infinite degree, indeed! "As heck a'heaven-high: FOR SURE!!" I dare say...
<Edited By Host>

Do you have all pop-up blockers disabled?
FYI: Please lose all the formatting in your posts.Simply makes it very difficult to follow.

How to troubleshoot trror in ant build with TFS 2012

Hi folks,
I originally had an ant builds working in TFS 2010 using Eclipse as a
client. I then upgraded to TFS 2012 and am using Explorer Everywhere 2012
in Eclipse.
Unfortunately, when I try to recreate the build, I see the error:
         MSB4044: The "CreateWorkspaceTask" task was not given a value
         for the required parameter "BuildAgentUri".
The full log is below. Any help or pointers on how to troubleshoot
this issue would be greatly appreciated.
Regards,
Rajesh
=================Log file==============
Build started 9/25/2012 6:45:56 PM.
Project "C:\Builds\2\Sudoku\Sudoku_Wendy\BuildType\TFSBuild.proj" on node 1 (EndToEndIteration target(s)).
FixupPropertiesForShelvesetBuilds:
GetBuildProperties TeamFoundationServerUrl="http://wendy:8080/tfs/defaultcollection" BuildUri="vstfs:///Build/Build/14"
InitializeBuildProperties:
GetBuildProperties TeamFoundationServerUrl="http://wendy:8080/tfs/defaultcollection" BuildUri="vstfs:///Build/Build/14"
InitializeEndToEndIteration:
UpdateBuildNumberDropLocation TeamFoundationServerUrl="http://wendy:8080/tfs/defaultcollection" BuildUri="vstfs:///Build/Build/14" BuildNumber="Sudoku_Wendy_20120925.2" DropLocation="\\wendy\TFS_Sudoku_Main\Sudoku_Wendy_20120925.2"
CoreInitializeWorkspace:
DeleteWorkspaceTask TeamFoundationServerUrl="http://wendy:8080/tfs/defaultcollection" BuildUri="vstfs:///Build/Build/14" Name="WENDY_7_2" DeleteLocalItems=True
The workspace WENDY_7_2 does not exist.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets(801,5): error MSB4044: The "CreateWorkspaceTask" task was not given a value for the required parameter "BuildAgentUri". [C:\Builds\2\Sudoku\Sudoku_Wendy\BuildType\TFSBuild.proj]
Done Building Project "C:\Builds\2\Sudoku\Sudoku_Wendy\BuildType\TFSBuild.proj" (EndToEndIteration target(s)) -- FAILED.
Build FAILED.
"C:\Builds\2\Sudoku\Sudoku_Wendy\BuildType\TFSBuild.proj" (EndToEndIteration target) (1) ->
(CoreInitializeWorkspace target) ->
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets(801,5): error MSB4044: The "CreateWorkspaceTask" task was not given a value for the required parameter "BuildAgentUri". [C:\Builds\2\Sudoku\Sudoku_Wendy\BuildType\TFSBuild.proj]
    0 Warning(s)
    1 Error(s)
Time Elapsed 00:00:00.93
Regards,

Hi Rajesh,
Sorry it took too long to reply back, so I have been investigating that issue and it turned out that the BuildAgentUri property that it is complaining about is now required while it was not in TFS 2010. so this suggests that your build targets file might
be still 2010. To confirm this, please go to:
this file C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets
you should fine two definitions for the CreateWorkspaceTask:
<CreateWorkspaceTask
          TeamFoundationServerUrl="$(TeamFoundationServerUrl)"
          BuildUri="$(BuildUri)"
          BuildDirectory="$(BuildDirectory)"
          SourcesDirectory="$(SolutionRoot)"
          Name="$(WorkspaceName)"
          Comment="$(CreateWorkspaceTaskComment)"
          Condition=" '$(ProjectFileVersion)' != '4'">
      <Output TaskParameter="Name" PropertyName="WorkspaceName" />
      <Output TaskParameter="Owner" PropertyName="WorkspaceOwner" />
    </CreateWorkspaceTask>
    <CreateWorkspaceTask
          TeamFoundationServerUrl="$(TeamFoundationServerUrl)"
          BuildUri="$(BuildUri)"
          BuildDirectory="$(BuildDirectory)"
          BuildAgentUri="$(BuildAgentUri)"
          SourcesDirectory="$(SolutionRoot)"
          Name="$(WorkspaceName)"
          Comment="$(CreateWorkspaceTaskComment)"
          Condition=" '$(ProjectFileVersion)' == '4'">
      <Output TaskParameter="Name" PropertyName="WorkspaceName" />
      <Output TaskParameter="Owner" PropertyName="WorkspaceOwner" />
    </CreateWorkspaceTask>
if you find only the first definition then this is the problem.
Please let me know what did you find out.
Thanks for your patience
Thanks
Mireille

Adobe Creative Cloud Packager for macintosh fails

Adobe Creative Cloud Packager for macintosh fails.
The error log says "[ERROR] AdobePackageBuilder - AdobePackageBuilder : SendPacket returned error : -1".
I tried 4-5 times.
Everything is downloaded (took about 14 Gb).
I now have only 12Gb free space on my disk. Can that be the reason (will the packager need to make a copy of the downloaded stuff?).
When I am done, how do I reclaim the space eaten by the packager?
Seems like it is caching it at ~/Library/Application Support/Adobe/CCP, but will I manually have to delete that cache?
I cannot find a menu entrance for doing so.
Would be nice if the packager could use a mounted network disk as destination, but it seems not to discover these.
/Peter Andersen

Wanted to join in and say this has been happening to me too. I wiped every adobe file I could find, and used the cleaner too. Started over from scratch in a brand new user account.
It's been about 7 days and I cannot get CCP to actually build a package. I've gotten a variety of messages but everything single time something fails. The new thing is that it says it fails on individual applications. So I disable them, and the error jumps to a new app. I can see that the .dmg's are fine and intact in ~/Library/Application Support/Adobe/CCP/
Given the amount of time this has cost me I really wish I had purchased CS6 Master Collection for every workstation. From my perspective, Creative Cloud has been nothing more then a giant waste of time and effort. It's genuinely bad product from an IT management perspective. Why push off the job of building and installer onto the customer? I should just be able to download the full Master Collection dmg, and then turn on and off the apps I want. Instead I am stuck with a workstation down, and everyone using CC trials to work.

My hard disc has failed how can I download data from my ipod to a new hard disc?

my hard disc has failed how do i transfer the data on my Ipod/Ipad to a new hard disc?

In addition to the comments above, when you create a new library with the media that you recover this will be treated as "new" for the device and iTunes may want to wipe it and start over, losing any personal data and settings. The following approach ought to help.
You should be able to:
Backup the device to your iTunes installation
Transfer your purchases into a library authorized to your account
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer (same as above)
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2

HT201272 Having a bad day my iTunes library got corrupted and my back up disk has failed how can I restore my purchases from the iTunes store

Having a bad day my iTunes library got corrupted and my back up disk has failed how can I restore my purchases from the iTunes store? When I try it tells me the pruchases have already been downloaded to this computer.

Does your purchased rmusic appears under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (music can't be re-downloaded in all countries) ? If they do and you don't have the cloud symbol against them so as to re-download them, then do you still have the entries for them in your library i.e. where you would normally click on them to play them ? If you do then try deleting them from there (iTunes will be seeing them and assuming that you still have them somewhere) and they should then get the cloud symbol for re-downloading in the Purchased link.
If you aren't in a country where music can be re-downloaded then you could try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page,

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

ORA-20100: File oRI_INV_.tmp creation for FND_FILE failed.

Dear All,
I am getting the following Error while running a concurrent program. Could anyone help me out why this error is coming out:
Cause: FDPSTP failed due to ORA-20100: File oRI_INV_.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 410
ORA-06512
Many Thanks in advance....

Please verify the following:
1) Make sure that APPLPTMP is set to a valid directory as shown above (Verify from the OS by issuing "echo $APPLPTMP" as applmgr user)
2) Make sure that both the applmgr user and the database user "oracle" have read/write permissions on $APPLPTMP
3) Make sure that APPLPTMP is the first entry in utl_file_dir (utl_file_dir is set in the init<SID>.ora file). To verify to what "utl_file_dir" is set:
SQL> connect / as sysdba
SQL> show parameter UTL_FILE_DIRYou may also check the troubleshooting steps outlined in the following note:
Note: 261693.1 - Troubleshooting ORA-20100 on Concurrent Processing
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=261693.1

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)?

I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)? It does not have a CD drive.

If all else fails, try this. i used to do it all the time before. might or might not work with the new office.
if you have access to another computer with a cd/dvd rom, copy the entire contents of the cd on a thumb drive.
insert the thumb drive in your MB and do the install from there.
However, if you have the newer version of MS Office, Bandit's suggestion is much better.

Where/how to troubleshoot external gateway and internal connection brokers etc.??????

We have gateway.domain.org as our external/internal gateway server.
It goes from gateway.domain.org to rdbroker.domain.local, rdbroker is the DNS address for two connection broker servers.
After this it should set up the connection and create a remote desktop to one of the RDS host servers in the RDS host farm.
Sometimes this works, sometimes it doesn't -- for different user accounts and different computers.
How to troubleshoot this??
We know the firewall rules for DMZ etc. etc. are properly configured because everything IS observed to work, just not all the time consistently. We get errors about cannot contact the computer, cannot establish remote desktop connection...
Thank you, Tom

Hi Tom,
Firstly, you need to recheck the DNS entry is well setup for your case. Are you using DNS RR for Load balancing the server or 3rd party load balancer? Have you setup the proper certificate for your case?
Please check whether required ports is opened? We need to open TCP port 443 and UDP port 3391 and forward them to your RD Gateway server. Also need to specify the external FQDN of your RD Gateway server in deployment properties under RDS server manager. If
you have RDWeb and RDG on the same server this would be the same FQDN that your users will use for RDWeb. Please see whether you have properly configured RD RAP and RD CAP policy.
You can go through beneath article for more details.
Step by Step Windows 2012 R2 Remote Desktop Services – Part 3
https://msfreaks.wordpress.com/2013/12/26/windows-2012-r2-remote-desktop-services-part-3/
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT204291 3th. gen apple TV with 5.2.1 and mac mini with 10.8.3, only black screen on TV after selecting Apple TV on the airplay icon. how to troubleshoot?

I have a 3th Gen Apple TV and a late 2012 mac mini with IOS 10.8.3
- Connected thru HDMI to an ASUS monitor
- Apple tv connected with wire
- Mac Mini connected wireless.
- I can see the Airplay icon on the screen
- I can select my apple TV on the icon pull-down menu (first time it asked me for apple TV password)
- Once selected, my monitor resolution changes and apple TV goes to a blank screen. On the pull-down menu, my apple TV papears selected and the option "match desktop size to:" is selected for my Apple TV.
Any ideas on how to troubleshoot?
Additional Info:
- I can stream from iTunes music with no problem
- From an Air (on same wireless network) I can mirror my display. And form iPad and iPhone I can stream video and music.

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

I forgot my password for my ipad how can i unlock it

i forgot my password for my ipad how can i unlock it

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

BPA for webserver fails, how to troubleshoot

Similar Messages

Maybe you are looking for