BPC standard Appshell copy error to another appset
Hi,
We have installed the BI and BPC 7.5 sps 05 for netweaver, Now we are going to copy the default appshell to another
getting the abap dump and job was cancelled in BI.
Could any one help us on resolving this issue.
COPY_APPSET BPC_ADMIN Canceled
01.04.2011 07:29:52 Copied dimension P_ACCT successfully UJA_EXCEPTION 209 S
01.04.2011 07:29:52 Copied dimension P_ACTIVITY successfully UJA_EXCEPTION 209 S
01.04.2011 07:29:52 Copied dimension P_CC successfully UJA_EXCEPTION 209 S
01.04.2011 07:29:52 Copied dimension P_DATASRC successfully UJA_EXCEPTION 209 S
01.04.2011 07:29:52 Copied dimension RPTCURRENCY successfully UJA_EXCEPTION 209 S
01.04.2011 07:29:52 Copied dimension R_ACCT successfully UJA_EXCEPTION 209 S
01.04.2011 07:29:52 Copied dimension R_ENTITY successfully UJA_EXCEPTION 209 S
01.04.2011 07:29:52 Copied dimension TIME successfully UJA_EXCEPTION 209 S
01.04.2011 07:29:52 Created Infocube /CPMB/LMIZA6K successfully UJA_EXCEPTION 155 S
01.04.2011 07:29:52 Created audit table successfully UJA_EXCEPTION 164 S
01.04.2011 07:29:52 Created comment table successfully UJA_EXCEPTION 162 S
01.04.2011 07:29:52 Created journal table successfully UJA_EXCEPTION 163 S
01.04.2011 07:29:52 Created workstatus table successfully UJA_EXCEPTION 165 S
01.04.2011 07:29:52 Copied Application PLANNING successfully UJA_EXCEPTION 210 S
01.04.2011 07:29:52 Created Infocube /CPMB/LMIX0AO successfully UJA_EXCEPTION 155 S
01.04.2011 07:29:52 Created audit table successfully UJA_EXCEPTION 164 S
01.04.2011 07:29:52 Created comment table successfully UJA_EXCEPTION 162 S
01.04.2011 07:29:52 Created journal table successfully UJA_EXCEPTION 163 S
01.04.2011 07:29:52 Created workstatus table successfully UJA_EXCEPTION 165 S
01.04.2011 07:29:52 Copied Application RATE successfully UJA_EXCEPTION 210 S
01.04.2011 07:29:53 Internal session terminated with a runtime error (see ST22) 00 671 A
01.04.2011 07:29:53 Job cancelled 00 518 A
Regards
Kotesh
Hi,
Thanks for your reply, Please find the st22 dump below:
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_UNKNOWN
ABAP Program UJA_COPY_APPSET_OPT
Application Component CPM-BPC-ADM
Date and Time 01.04.2011 08:10:10
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "UJA_COPY_APPSET_OPT" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Only message types A, E, I, W, S, and X are allowed.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_UNKNOWN" " "
"UJA_COPY_APPSET_OPT" or "UJA_COPY_APPSET_OPT"
"START-OF-SELECTION"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_UNKNOWN
ABAP Program UJA_COPY_APPSET_OPT
Application Component CPM-BPC-ADM
Date and Time 01.04.2011 08:10:10
Screen Line......... 6
Debugger Active..... "none"
Information on where terminated
Termination occurred in the ABAP program "UJA_COPY_APPSET_OPT" - in
"START-OF-SELECTION".
The main program was "UJA_COPY_APPSET_OPT ".
In the source code you have the termination point in line 69
of the (Include) program "UJA_COPY_APPSET_OPT".
The program "UJA_COPY_APPSET_OPT" was started as a background job.
Job Name....... "COPY_APPSET"
Job Initiator.. "BPC_ADMIN"
Job Number..... 08080600
Source Code Extract
Line SourceCde
39 exporting
40 i_module_name = uj00_cs_module-uja
41 changing
42 c_appset_id = as_src
43 cs_user = ls_user.
44
45 create object lo_admin_mgr
46 exporting
47 i_appset_id = as_src.
48 call method lo_admin_mgr->copy_appset
Regards
Kotesh
Similar Messages
-
BPC NW 7.0 error when accessing appset
after installation, first time I go to admin console with user name administrator, password, I was able to get in admin console.
however when I click "manage appset" to change appset or copy appset "appshell" to my own appset, I got problem.
I was asked to login again with user name and password.
the error message I go is,
Admin Load Failed.
Public Member "'language" on type "XMLCreator" not found.
I don't even know where this XMLCREATOR is.
the error log is
==============[BPC Logging]==============
[Message Type] : ERROR
[Job Name] : LogOn
[DateTime] : 10/27/2009 2:29:49 PM
[UserId] : SAP5\administrator
[Message] : ERROR:
ManageAdminAppInfo response:
<QUERY><RESULT><memberlookup><![CDATA[]]></memberlookup><srv_version><![CDATA[CATEGORY-1.012;C_ACCT-1.010;C_CATEGORY-1.011;C_DATASRC-1.007;ENTITY-1.008;FLOW-1.008;GROUPS-1.006;INPUTCURRENCY-1.008;INTCO-1.005;O_ACCT-1.004;P_ACCT-1.020;P_ACTIVITY-1.006;P_DATASRC-1.006;RPTCURRENCY-1.007;R_ACCT-1.007;R_ENTITY-1.006;TIME-1.020]]></srv_version></RESULT><ERRMSG><![CDATA[]]></ERRMSG></QUERY>
==============[BPC Logging End ]==============
any idea?
GeorgeHi George,
did you find any solution for the problem? I get a similar Error: "Public member 'ClearParameterNodes' on type 'XMLCreator' not found" when I try to start the Admin Client on a Windows XP system. It works perfect when I start the Admin Client on the windows server with the BPC 7.0 installation.
Thanks,
Peter -
Error while trying to copy template from another application
Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now. -
Edit a BPC Standard Package with SSIS
Hi,
I need to edit a BPC standard package ("Convert Task" for example) with SSIS.
I have an Error message of Microsoft Visual Studio :
The task with the name "Admin Task" and the creation name "Osoft.Services.Application.DataMgr.Task.SSISAdmin, OsoftTaskAdmin, Version=4.2.0.400, Culture=neutral, PublicKeyToken=bf6c37fa78f5a648" is not registered for use on this computer. Contact Information:Admin Task
I copied files .dll from "u2026\websrvr\bin" to "u2026\90\DTS\Tasks"
Thank you for your help
Regards,
MorgannHi James,
I always have the same issue.
For my customer, BPC is installed E:\ in Citrix environment
In first, I followed the guide "How to...Build SSIS Package for SAP 5.0".
I copied my "osofttask.dll" files in E:\BPC\websvr\Web\Installation\OsoftSSIS_client\Bin to E:\MSSQL\MSSQL2005-0\90\DTS\Tasks
Then, I copied these files in GAC (C:\Windows\Assembly) like your procedure.
But I always had the same error message in SSIS...
Have you another idea ?
Files are copied betwween E and C, is it an impact ?
Thanks,
Morgann -
Copy error -36 when copying from Time Machine disk to Mac
Since using OS X 10.6.(.6), I can't copy certain files from my Time Machine disk to the Mactintosh hard disk without getting a copy error -36. The error doesn't occur with all files: for example pdf files will copy without problems, but Filemaker Pro files and iCal files don't. May be it's important to mention that when I retrieve files from the Time Machine disk, I have to mount the "sparse bundle" with my user files first and then drag the files to the desktop or an other place. This is because I'm running File Vault. If I try to retrieve files that were backed up under OS X 10.5, I get no copying errors at all. So it looks as if Snow Leopard has something to do with it. Is there anybody who has seen this problem before and knows how to solve it?
Ok, I finally was able to complete the Disk Utility Repair, and it says everything is ok. Still the problem in restoring presists.
One thing I noticed is that most files that Time Machine restore chokes on have an added set of permissions added to the file or folder with the same user name as mine, and the permissions level says "Custom". Thus it has 2 sets of permissions defined with the same user name, one with Read/Write and another with the same name that says "Custom." Am I explaining this well? Maybe this is a clue? -
Finder Nonresponsive After Copy Error - Best Plan of Action?
The following happens on my system frequently. I am running 10.5.8.
Any help in understanding why this happens, and more importantly, what is the best course of action to take when it does, would be greatly appreciated.
I ask the Finder, via drag-and-drop, to copy a folder containing tens of gigabytes of data, from one, usually external, hard drive to another, usually external, hard drive.
The Copy window opens, reports the appropriate amount of data to be transferred, and the blue progress bar proceeds as expected. Partway through the process, the Finder returns a copy error, which states something like (I apologize for the paraphrase, but I do not have the exact message in front of me at the moment.) "The file [specified name of file] contains data that cannot be read or written." I click the "Ok" blue button (the only option provided). The error window disappears, and the Copy window is left, but the copy process does not continue, or at least the window does not indicate that any activity is happening. If I click the grey "x" button in the Copy window to stop the process, nothing happens. Even if I wait several hours after clicking the grey "x" button, nothing happens.
Trying to drag any of the hard drives connected to the system (whether they are the drives from or to which the data is being copied) results in an error message indicating that the drive is in use and cannot be unmounted.
Trying to shut down the system via the Apple menu usually results in no apparent activity. Other times, a message will eventually appear indicating that the Finder is preventing shutdown.
Attempting to relaunch the Finder via Force Quit results in the desktop items disappearing, but the Finder not quitting (the blue light remains below the dock icon). At times, I have been able to use Spotlight to run Terminal to attempt command line shutdown instructions, to no avail, and to attempt command line Finder termination commands, also to no avail.
The only action that results in a predictable, effective response is holding down the power button until the system shuts off. This, of course, is not ideal in terms of the hard drive data.
There are no known issues with the files being copied. For example, upon rebooting the system, I can copy the files without generating an error.
Can anyone provide any insight as to what is happening, how to prevent it from happening, and what to do when it does happen?
If more information will help, I will gladly try to answer any questions.
Thank you.
RDFrelaySome additional information: The error message reads as follows: "The Finder cannot complete the operation because some data in "(file name)" cannot be read or written." It also says "Error code -36".
Using Force Quit to ask the Finder to relaunch results in a blank desktop (everything except the Dock is gone).
Again, there is nothing wrong with the file that is named in the error.
Does anyone know what is going on and how to resolve it?
Thanks.
RDFrelay -
Whille copying error ""The operation cannot be completed because you do ...
Hi there I read a lot of post regarding this problem, I have some files that I copied from a USB drive that I can't copy since I have the error "The operation cannot be completed because you do not have sufficient privileges for some of the items." when I try to copy them to another disk (trying different disks there is no difference)
Right-click on the file and choose *Get Info*. At the bottom of the window you will see *Sharing & Permissions*. Click on the lock and enter you password. If your name is there change the permission to Read & Write. If not, add your name to the list and make sure it's set to Read & Write. You should now have access.
-
Hi,
We are currently experiencing some failures with copying files (files
typically over 100mb in size) up to one of our file servers, and we're
hoping that someone has seen the problem or has some advice.
The server is an HP Proliant DL360 G5 (with two Broadcom Gigabit NICs)
running Novell Netware 6.5 with SP8. The typical CPU load is below 20%,
however packets per second is typically in the 50k-75k packets per
second range during the day.
On Windows XP with Novell Client 4.91 SP5, we receive: "Cannot copy
<filename>: The specified network name is no longer available."
On Windows 7 with Novell Client 2 SP1 (IR8), we receive "Can't read from
the source file or disk."
The symptoms are more typical when the traffic is higher on the server
and in areas with faster switch hardware. There is no consistency with
when (during the copy) we see the error and there seems to be no affect
on the server itself. Even though we have not seen errors on the
monitor's NIC stats, we have tried moving from one server NIC to the
other to see if it is somehow related to a NIC. The errors are
repeatable on both the server's internal drives as well as the connected
SAN drives.
In addition, we have another server with almost the same configuration
(same hardware, SAN connection, OS version and patch level) that is not
having this problem at all. The main difference is that the load on
this 2nd server is very small compared to the server where we see the
copy errors.
Any info is greatly appreciated.
Thanks.
,MattHello,
please check the driver's version of the broadcom nics (BX2.LAN).The
were some versons causing issues (3.70, 4.41, 4.42) in the past look
whether version 5.01 is loaded on the server and check whether you team
the nics with broadcom teaming software or the netware built-in. MAybe
you should also check the ports of the network switch for connection
options (Speed/Duplex settings being auto/auto or 1G/full). Also the
firmware of the server (BIOS, NICs etc.) should be checked, you can find
updates on the website of HP:
http://h20000.www2.hp.com/bizsupport...&swEnvOID=1064
Regards and good luck
Burkhard Wiegand
Netware Admin
Debeka-Versicherungen
D-56068 Koblenz -
Hello,
I need to basically find everyplace 'ADUser1' exists and then add a new 'ADUser2' with the same permissions as the first group.
I have created a script that runs through an entire web app and finds everyplace the AD account is directly given access to and access via a group. I then need to add the new user and assign the permissions from the first ADUser, copy them. Below
is not the entire script, just where I'm trying to add the new user. The rest of the script works fine to find the first user. I'm stuck with this part: $role = $_.RoleDefinitions[$newRoleDef]. I get an error that I can call a method
on a null valued experssion.. I guess I don't know how to specify to copy the role from the first user, and use it to set the new user?
#Get the Permissions assigned to user
$WebUserPermissions=@()
foreach ($RoleDefinition in $WebRoleAssignment.RoleDefinitionBindings)
$WebUserPermissions += $RoleDefinition.Name +";"
$newRoleDef = $RoleDefinition.Name
#write-host "with these permissions: " $WebUserPermissions
#Send the Data to Log file
"$($Web.Url) `t Site `t $($Web.Title)`t Direct Permission `t $($WebUserPermissions)" | Out-File C:\Apps\Scripts\Logs\UserAccessReport.csv -Append
$assignment = New-Object Microsoft.SharePoint.SPRoleAssignment($account)
$role = $_.RoleDefinitions[$newRoleDef]
$assignment.RoleDefinitionBindings.Add($role)
$_.RoleAssignments.Add($assignment)Hi,
According to your post, my understanding is that you want to copy user permission to another user via PowerShell.
Instead of copy permission to another user, we can get the user permission, assign the permission to a group, then add the other user to the group. Now the user would get the same permssion as this user.
http://get-spscripts.com/2010/07/adding-groups-with-permission-levels-to.html
http://blog.thefullcircle.com/2013/02/create-a-sharepoint-group-with-permissions-and-add-an-ad-group-to-it/
We can also use the third-party tool to achieve the same scenario.
http://permissionsmanager.codeplex.com/
http://www.boostsolutions.com/blog/how-to-copy-permissions-to-other-users-in-sharepoint/
Thanks,
Jason
Jason Guo
TechNet Community Support -
Will Disk Copying Continue in Another Login Account?
Will Disk Copying Continue in Another Login Account on the Same Computer?
This is likely a very dumb question, but nonetheless here goes:
I am logged into my Mac (Yosemite) under my admin account and I start copying data to or from an external hard drive. The amount of data being transferred is large, so it takes a long time.
Now my kids want to log into their standard privileges account to do their homework while this copying process is going on. If they do so, will the data transfer with the external disk still continue, or will something bad happen?
Related to this, does it matter if they simply log in as an additional user, versus me logging out from my admin account and then them logging into their user account?
Thank you!As long as you don't log out, it will continue to copy. Just use Fast User Switching.
If it is not already enabled, you can enable it in Users & Groups system Prefs, Login Options. -
Hello All
I have a VI that write an image to a file. I have an error at the IMAQ COPY. Plaese see the attachment.
Thanks
Nghtcwrlr
********************Kudos are alwayzz Welcome !! ******************
Solved!
Go to Solution.
Attachments:
IMAQ COpy error.vi 11 KB
Error.jpg 17 KBHi Nght,
It's because you are trying to copy a reference to an image, not an image itself.
See my revised version; you need to use another IMAQ Create so you have one location for the original and one for the copy. You also need to specify filepaths for the original and copy.
Thanks,
Eden S
Applications Engineer
National Instruments UK & Ireland
Attachments:
IMAQ COpy error.vi 11 KB -
Script to take every 5th file from a folder and copy it to another folder
How can I tell applescript to take every 5th file of a folder of say 2000 files and copy them to another location? I want to copy the 5th, 10, 15th, 20th files and so on of 2000 files so I will have only 400 files.
I guess I want to make a list of all the files and then coerce that to the first and then increments of five but how do I do that?
Thanks.
PedroHi Pedro,
The following script should do what you are asking for:
*set theSourceFolder to choose folder with prompt "Select the source folder."*
*set theTargetFolder to choose folder with prompt "Select the target folder."*
*tell application "Finder"*
*set theFiles to files of theSourceFolder*
*repeat with k from 5 to (count theFiles) by 5*
*move item k of theFiles to folder theTargetFolder*
*end repeat*
*end tell*
Message was edited by: Pierre L. -
Can I cut a file from a folder & copy it to another without leaving ori
Hi Can I cut a file form a folder and copy it into another folder without leaving the original in the 1st folder?
I know I can copy it across. but I dont want to have to keep going back and deleting the original?
ThanksHave you read Switch101?
-mj
[email protected] -
How to copy file to another server from database using FTP in oracle
How to copy file to another server from database using FTP in oracle.
Please do the needfaul.Billy Verreynne wrote:
BluShadow wrote:
Not to mention that some FTP servers can return more than one return message per operation whereas others may return one message for the same operation.I had the problem using the LIST command to determine if a file exists on the server. Cannot be determined via the FTP server's return code. Which means parsing and checking the text response from the server to the command. And this vary from server to server.
But the basics were quite easy to code. The entire package is 500 lines, includes comments and blank lines for formatting, and supports the basic FTP client command set. Not really a complex piece of software to write - but I found that many developers seem to think that writing network socket software is complex. Not really the case...Mine's a big larger, but incorporates functionality similar to what Chris provided in his, such as being able to use SQL to query a remote file using pipelined functions, or functionality to write the results of a query directly to a remove file.
:) -
How to copy images from another MC in reversed order??
Hi everyone,
I'm new to AS3 and have been fighting and searching for a solution to this problem for a week now, and I'm VERY close!
I crated a MC holding of a series of images (about 50) and I jump around in it using plenty AS3 scripts (most of which I don't fully understand yet, but I'm working on that to! )
I had to find a way to "rewind" (= play backwards) the MC. Since there is a stop(); command in almost every frame, prevFrame does not work and if I put that in a loop, it goes WAY to fast (but worked).. So I could think of only one way...
Create a new (reverserd) MC with the same image sequence ald reverse it manually and play that one.
This all works fine (very proud of it ).
Now my question:
To get this to work for multiple image sequences, I have to load all images twice (once in MC_1 and again in MC_2 and select them and reverse them).
Not a big one, unless you want to create MANY of those SWF's...
Is it possible to load the 50 images of the first MC in reverse into the second MC dynamically? JUST the images, noting else.
extra info: the MC_2 is already in the lib(empty) and placed on the stage.
something like:
var pointer:Number=1;
for (var:i:Number=50;i>=0;i--) {
get MC_1.picure(var);
put it in MC_2.frame(pointer);
pointer = pointer + 1;
All help is welcome and please take into account that I have little experience and copy most of my scripting from people like you
T.I.A.
MelluwI tried your advice (thanks for that)
The event I already have is the mouse leave
I //-d out the part I removed (what did work)
The code I ended up with is:
function Start() {
stage.addEventListener(Event.MOUSE_LEAVE, cursorHide);
function cursorHide(evt:Event):void {
var currFrame = MC_1.currentFrame;
if (CCW == true) { //it is true in this case
movStart = (50 - currFrame);
else {
movStart = currFrame;
if (movStart>25) {
MC_1.prevFrame();
// removed swapChildren(MC_1, MC_2); // This is the part I removed
// removed MC_2.gotoAndPlay(movStart);
else {
MC_1.gotoAndPlay (movStart);
And if I leave the stage on the part where movStart is indeed >25
Nothing happens,
So I guess this is not what you meant
Subject: Action Script 3 how to copy images from another MC in reversed order??
I cannot direct you in the loading of the images approach, it will be too complicated, and will probably not work anyways... when you move away from a frame that has dynamic content, you lose the content. So basically, there is nothing practical in taking that approach.
I do niot understand what the problem will be with the enterFrame/prevFrame approach. If everything you can do with the mouse is already used (which I doubt) by the first mc, then there is nothing else you can do with this file. You probably just need to rethink your control scheme. You should search Google for "AS3 slideshow tutorial", and to lighten up your design, add "XML" in that search.
>
Maybe you are looking for
-
JSSE Performance 1.3.1 v. 1.4.1
We are in the process of moving an application that uses JSSE SSL sockets from 1.3.1 to 1.4.1. It seems that socket creation time went through the roof by just switching the JDK's: Running on a LAN, in 1.3.1, after the initial socket, it takes <50ms
-
Hello friends, I have the following scenario where i get data from SQL table via JDBC and map it to an IDOC. <Row> <Header Ind>1111<Hearer Ind> <Det1>5<Det1> <Det1>5<Det1> <Det1>5<Det1> <Row> <Header Ind>2222<Hearer Ind> <Det1>6<Det1>
-
I download the latest jsf.jar 1.2_14 from https://javaserverfaces.dev.java.net/download.html put it in both my project (jsf-impl.jar, jsf-api.jar) and %Glassfish_Home/lib (replace jsf-impl.jar) But I found several bugs: (1) can not control width of s
-
Magic Trackpad - Show Trackpad Handwriting
I just bought a Magic Trackpad for my mac mini and quickly install it without a problem. However when I try to use the "show trackpad handwriting" by either pressing ctlshiftspace or click that on the menu bar, the "grey area" is just not showing up
-
I have optimise my system and have 16GB of ram and am only running lightroom, any ideas? I have re installed the program