BPC75NW: DM Package runs for parent level node

Hi,
I have build a DM package which has a variable input on ENTITY dimension. Now while I had built and unit tested on <ALL> ENTITY members, it took only base member values from the variable input.
But when I test this again after sometime, the ENTITY variable took parent level members as well.
I dont understand about this change as the DM package script code, and the LGF file is NOT CHANGED.
Can anyone suggest the possibilities of why this should have happen ?
Thanks,
Pankaj

Hi Nilanjan,
The output members are the ones that are passed through the input scope.
The logic does not generate/append a parent level member. As mentioned previously, the ABAP logic or the LGF is NOT CHANGED.
Regards,
Pankaj

Similar Messages

How to get label of Parent level nodes, when itemOpen() event of any node in AdvancedDataGrid in Flex?

Hi all,
This is the code, to get the label of every one parent level nodes, when we open the parent node item in AdvancedDataGrid in Flex.
<?xml version="1.0"?><mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.AdvancedDataGridEvent;
import mx.collections.ArrayCollection; [
Bindable]
private var groupData:ArrayCollection = new ArrayCollection([{Computer:
"HardWare Devices", Device:"Keyboard", Company:
"Logitech", PriceInRupees:"500"}, {Computer:
"HardWare Devices", Device:"Keyboard", Company:
"Microsoft", PriceInRupees:"500"},{Computer:
"HardWare Devices", Device:"Mouse", Company:
"Logitech", PriceInRupees:"300"},{Computer:
"HardWare Devices", Device:"Mouse", Company:
"Microsoft", PriceInRupees:"300"},{Computer:
"HardWare Devices", Device:"Monitor", Company:
"LG", PriceInRupees:"5000"},{Computer:
"HardWare Devices", Device:"Monitor", Company:
"Microsoft", PriceInRupees:"5000"}]);
//This method is used to get label of every parent lavel nodes, when we open any item
private function getLabel(e:AdvancedDataGridEvent):void{
Alert.show(e.item[
"GroupLabel"]);}
]]>
</mx:Script>
<mx:Label text="NOTE : Open the every parent level nodes here. We can get the label of every one parent level nodes."color="
blue" fontWeight="bold"/>
<mx:AdvancedDataGrid id="groupADG" width="
100%" height="437" initialize="gc.refresh();" itemOpen="getLabel(event)"
>
<mx:dataProvider>
<mx:GroupingCollection id="gc" source="{groupData}">
<mx:grouping>
<mx:Grouping>
<mx:GroupingField name="Computer"/>
<mx:GroupingField name="Device"/>
</mx:Grouping>
</mx:grouping>
</mx:GroupingCollection>
</mx:dataProvider>
<mx:columns>
<mx:AdvancedDataGridColumn headerText="
Computer"/>
<mx:AdvancedDataGridColumn dataField="Company"headerText="
Company"/>
<mx:AdvancedDataGridColumn dataField="PriceInRupees" headerText="PriceInRupees"/>
</mx:columns>
</mx:AdvancedDataGrid>

Dialog\ResponseTime 6585
"The dialog response time consists of the period of time from the request of the dialog to the dispatcher through the processing, to the ending of the dialog in the dispatcher and the transfer of the data to the presentation layer"
This is not buffered as far as I know is measured on demand
Read,
http://help.sap.com/saphelp_nw70/helpdata/en/31/d7843b43c8e937e10000000a11402f/content.htm
Regards
Juan

WRITE_BACK BADI for Parent Level Data Save

Hi Experts,
I am using write back badi for Parent level data saving in BPC 10, but my requirement is to save data at parent level for time period 2007.Q1 without segregating at corresponding base members level.
Is it possible so? if yes , please suggest.
I will highly appreciate for your quick response.
Regards,
Dipesh Mudras

Hi Dipesh,
BPC NetWeaver related questions should be posted in the corresponding forum, cf.
SAP Planning and Consolidation, version for SAP NetWeaver
Regards,
Gregor

How to assign ALV for parent node and child node that uses supply method.?

HI Dear friends,
I need to display header details ( VBAK ) and Item details ( VBAP ). I have created two node like HEADER_NODE inside this i have created ITEM_NODE for this item node i use supply function 'GET_ITEMS' any way it is working only when crete two separate table and binding but when i come to work with ALV i am totally confused .. i have created two 'View Controller UI Elements' when i try to map HEADER_NODE it mapped properly but for ITEM_NODE it shows mapping already defined. return status message as 'Action Cancelled' . In result both ViewContainer shows only HEADER_NODE data only.
How to achive ALV for Parent, child node that uses supply function ? ?
Thank you

Delete Mapping is not enabled, that means there is no mapping done yet.
I just tried what you are saying and the application works and i am able to map the header table and item table and also again i could map the tables any number of times.. i didn't get any such message, sorry i couldn't recreate the scenario. might be there is something wrong in the context.
i just did it like this.
Please also move this to Web DynPro Discussion, Hope that would be helpful.
Message was edited by: Syed Ghulam Ali

Regarding Tree Leaf level node

Hi all,
I'm trying to get the tree node item (at any level) on RollOver event. But I can get the node which have child only. For leaf level node i'm getting empty value.
i used the below mentioned code.
Example code:
tree.addEventListener(ListEvent.ITEM_ROLL_OVER, sample);
//event handler
private function sample(event:Object):void
rollOverItem = (event.itemRenderer).data;
Please give me solution to get the leaf level node item.
Regards,
Karthik.

It is difficult to make the tree display a different
structure than the xml. To do this you will need to look into
creating a custom DataDescriptor.
I would advise preprocessing the xml to create a dataProvider
with the data/structure you need for the tree, then using id's on
the nodes to select the subnodes from the main xml.
Tracy

Essbase parent level aggregation business rule for end users

Can someone provide me the basic syntax of a business rule to allow end users within Planning to run a run time prompt business to aggregate their responsibility level within a dimension like Cost Center? So for example, I want to allow a cost center manager to pick his parent level cost center and then run the aggregation script to rollup only his cost center expenses. I've tried to include AGG and CalcDim commands with various global variables to enable them to select the cost center fix point, but the aggregation doesn't seem to produce the right results. Anyone have a workable syntax for this?

If you are just trying to agg the children up to the parent it is even simplier I'll assume you are trying to roll up the company to some intermediate level
Say you have the outline
company
---East
------NY
-----NJ
---West
-----Ca
-----Az
and you want to roll up East you could do something like
FIX (FY10, Final, Actual)
@IDESCENDANTS("East");
ENDFIX
Of course I would add more into the fix to do the least work possible
The command Idescendants really means calculate all of the descendants of the selected member. I guess if you wanted to make it more efficient you could add the level command into it
like @idescendants("East"",-1) that would avoid looking for anything to do on the level zero members

DOE KEYMAP_SERVICE_AV Unable to find parent record for record of node

I HAVE A DO OBJECT WITH 2 LEVELS (HEADER AND 1 CHILD) WHEN I DELETED THE HEADER AND SYNCRONIZE THE ERRO BELOW OCCURS
BACKEND KEYMAP_SERVICE_AV Successful execution CL_ORDEM_INS~DELETE
BACKEND KEYMAP_SERVICE_AV Successful execution
DOE KEYMAP_SERVICE_AV Unable to find parent record for record of node 'OPERACAO_INS'
DOE KEYMAP_SERVICE_AV SYNCKEY_MMW = BE8C84A1DEE142C497BB215A6BF4DE5E MOBILE_ID = COLETOR_ERICO TRANS_ITEM_ID = BE8C84A1DEE142C497BB215A6BF4DE5E IDORDEM_INS = 2C539E9D0848470099033B873FFE0AD3 OPERACAO = 0010 SUBOPERACAO =
WHAT'S WRONG, I SEARCH IN DOE TABLES AND THE PARENT RECORD EXISTS ?
THANKS

What's the value of :NEW variables after deletion? NULL! What gets inserted into your child table? You guess it... :)

MPS run, planned orders were created for all levels ?

Hello PP members
I ran a small scenario
material    MRP Type     Low Level    SG           M/T Type
A      M0         000             40              FERT
B               PD              001              40             HALB
c               PD              002               10             ROH
Maintained PIRs(MD61) for material A, and ran MD41( Single Item Multi level Planning)
As material A is an MPS item, I was expecting that it should create planned orders only for material A, but in this MPS run it created planned orders for material B & C. (Looked into MD04, where I see planned orders were created
for all the levels)
As per the MPS run, it will plan only for one level of BOM (in this scenario for material A)
Any suggestions, why planned orders were created for material B & C
please clarify

Just check
System must have created a dependent requirement planned order and not the planned order for requirement you put in demand management for B and C
i.e. if you enter a demand in MD61 for B and C, run the transaction, system will not consider this requirement during MPS run. MPS run will consider the requirement if the requirement for the child is comming from parement where parent is MPS item.
Hence you need to run MRPm for B amd C if teh requirement(not dependdent requirement from A) is to be considered.
I hope you are clear
Edited by: Rajesha Vittal on Jan 28, 2008 8:06 AM

Row Selection for second and subsequent level nodes in tree table

Hi All,
We have a .jsff page with tree bindings to display a three-level hierarchy tree table.Suppose the hierarchy is
-> Department
->-> Employees
->->-> Employee details.
I have a use case where-in when we add the employee node within a department,the department node must expand and the newly added employee node must be selected.
In both the cases(for new department or employee), we are following the approach mentioned below:
1. Get the treeTable Iterator.
2.Adding the new object to the java ArrayList which is bound to the corresponding level in the tree.
3.Refreshing the treeTable iterator.
4.Execute treeTable.setSelectedRowKeys()
5.Add a partial target to the treetable.
The issue is that the new employee gets added but the upper-level department node collapses and no selection is performed on the new employee node.
But when we add a new department node, it gets selected on creation.
Is there any additional steps to be performed for second-level row selection?

Hi,
Thanks for the reply.
I looked at the code given in sample 61.
In the sample, a new node is not added dynamically (for ex.either new location or its child nodes.)
As mentioned in the above post, after adding a new node at a level in our use case, when we perform the refresh of the tree-table's iterator,the selection state of the rows is not shown on the table.
If the tree-table's iterator is not refreshed and the treeTable.setSelectedRowKeys() is executed, the rows get selected but the subsequent node additions do not show up in the table as the table's iterator is not refreshed.
Any sample code is available where in both the addition of new node and its selection is performed at the same time?
Thanks.

Base level entities data is not rollup to parent level entity for few ac's

Hi guys,
Can some one pls help me i am not able to consolidate the base level entitys data to parent level for few accounts.
remaining all accounts are consolidating to parent level entity from base level.
Accounts which are not rolling up to parent level those accounts are few flow accounts and some accounts are Dynamic accounts.
Thanks in advance............Pls revert me earliest........
Rama.

Guys this is HFM Consolidation hope there is no time balance settings in accounts attributes and we have not mentioned grouplabel to parent entity if that is the case it is as group label base entities will not aggrigate to parent entity but here few accounts are not aggrigating parent entity.
Thanks / Rama

In MRP Run for FERT, i want to eliminate 3rd level HALB and their BOM compo

Hi All,
Can you please guide me on this issue please.
Regarding - In MRP Run for FERT, i want to eliminate 3rd level HALB and their BOM components for exploration and planning
My scenario is:
Level 1: FERT1
Level 2: HALB1.1 + ROH1.1 + VERP1.1
Level 3: HALB1.1.1 + ROH1.1.1
Level 4: ROH 1.1.1.1 + ROH1.1.1.2
While performing MRP run i dont want to include the material HALB1.1.1 (Level 3 component) and their corresponding BOM component (ROH 1.1.1.1 + ROH1.1.1.2)
My constraint:
The reason for this is HALB1.1.1 is being manufactured through REM profile with separate PIR and MRP run.
But it is being consumed in FERT1 through intermediate semi-finished HALB1.1. and it needs to include for Product costing.
Note: All materials have been marked as PD - MRP type
Would be a great help from you.
Thanks and Regards
Khadeer Ahmed

Hi,
If you put in FI forums then you will get reply immediatly.
Anil

Function module that runs for every info package

Hi,
Please can you give me name of function module that runs for every info package irrespective of data source.
Cheers,
Reddy.

use below function module
RSSM_SDL_START_INFOPACKAGE

Run for loop inside event node

Hi all,
We want to run for loop inside event node with 50ms delay. But when i am doing it the Labview is crashing. Please let me know if somebody did this.
Thanks in advance,
Regards,
Harish. G
Thanks & Regards,
Harish. G.

harishg92 wrote:
Hi all,
We want to run for loop inside event node with 50ms delay. But when i am doing it the Labview is crashing. Please let me know if somebody did this.
Thanks in advance,
Regards,
Harish. G
You're implementing a For loop inside an event structure? (I don't know of any event "node" in which you can run a For loop)
If so, that's a bad idea because LabVIEW won't be able to process any events while waiting for your For loop to get done, which might be why its crashing.
There are tricks to accomplishing what you're trying to do without putting any for loops inside event structure. See what I have attached and if it helps. "N" is number of times you run your For loop, timeout is whatever delay you want in each loop. This can be done in many ways without adding delays in events, another way could be to fire a separate subVI using Asynchronous call (without waiting for the VI to finish) during those delays, just make sure that such subVI finishes processing within your allocated time (that's how I'd ideally implement things). That method is better because you're doing minimal work inside events structure while using wait period wisely in a separate/parallel process.
I hope that I understood you correctly and did not go off on a tangent.
-BTC
New Controls & Indicators made using vector graphics & animations? Click below for Pebbles UI
Attachments:
ForLoop inside Event Structure.vi ‏11 KB

Unable to view ECA and PCA value dimension for Parent Entity

Hi,
Situation: There is a parent Enity in (INR) with about 5 children Entity ( also in INR). Application default currency is USD .
Parent has ' allowadjfromchildren' selected and Children have 'allowAdjs' selected .
When I pull up a data grid with Parent and children for a particular POV , I can see data in < Entity currency > , < Entitty curr Adj> , <parent curr> , <Parent Currency Adj> for all children , However I dont see the <Entity curr Adj > or < parent curr Adj> at the Parent Level .
I can only see <entity currency> <entity curr total> and <parent curr>, <parent curr total> for the Parent .
qs. 1 . is this standard functionality ? Since Adjustment was not made at parent level , those intersection of ECA and PCA for parent will remain empty ?
qs 2 : Is there a way to roll up the sum of all children values in ECA into ECA at parent level ? rule change may be ?
eg . If child 1 has 10 , child 2 has 20 and child 3 has 30 in ECA , then their Parent to have 60 in ECA.
Currenty in our Appsettings we DO NOT have the Consolidationrules parameter selected .
Not sure if i was clear , Will appreciate some thoughts and direction on this .
Vik.

Hi,
Seeing that the currency is the same for the parent and children in your example, you will not see a difference between the children's <Entity Curr Adjs> and <Parent Curr Adjs>. In other words, if you post $10 to Child1 <Entity Curr Adjs>, you will also see that same amount in the <Parent Curr Adjs> - that is normal behavior and the child will only contribute the $10 to the parent. Because you have selected AllowAdjFromChildren HFM will allow you to post to [Parent Adjs] and [Contribution Adjs].
Q1: Yes, the adjustments are made to the child and will form part of the <Entity Currency> amounts in the parent. The parent's adjustment value members will store journals to the parent.
Q2: The sum of all the [Contribution Total] value members of the children will make up the <Entity currency> of the parent.
Q3: No, you will see the 60 in <Entity Currency> of the parent -- the way it works in more detail below:
EC + ECA = ECT;
Trans to Parent currency and seperate journals to PCA;
Security defines access to the [] nodes and if the parent has AllowAdjsFromChildren then [Parent Adjs] will be available;
Rules apply to [Proportion] and [Elimination] giving [Contribution];
Final adjustments allowed to [Contribution Adjs] to get to [Contribution Total]
Parent <Entity Currency> is the sum of children [Contribution Total];
Process starts again for the parent.
Regards,

Packaging Conventions for App. Developers

Looking for approaches to package organization for application developers. Everything I have read about this topic targets tool/framework developers. Grouping classes into packages seems intuitive in that case. But what about applications? Apps are not designed for reuse, so I don't have any intuition about how classes should be grouped. Whole application in one package? Separate package for each class? Does it matter? Thx.
Steve

Let me try to clarify what I was getting at. Package organization is determined at two levels: whether or not class are "related", and whether they might actually need to share data. For a library or framework, the first level is usually fairly intuitive because the code is meant to be reused; invoked or subclassed by other programmers. The package is imported to provide some particular functionality. Applications, by definition are an endpoint. In a layered design in a large environment, you'd get some reuse at the business logic level, but in general nobody is reusing this code. It's meant to be run only. So, the organizing principle of "related" tasks breaks down, at least for me. From semantic point of view, I could see architectural layers being a basis for organization, but other than that, I'm out of ideas. My inclination would be to lean toward encapsulation and put every class in its own package, unless there was an explicit need to share data. Hopefully I'm getting more and not less clear. Thanks.
Steve

BPC75NW: DM Package runs for parent level node

Similar Messages

Maybe you are looking for