BPEL and B2B Databases

Is there a repository creation assistant which installs the schemas for both BPEL and B2B in the same database? The IRCA script which comes with the BPEL distribution refuses to install into a database which contains the app server metadata repository required by B2B.
I've tried installing the IRCA first into a new database then using RepCA to install the metadata repository afterward. This install completes successfully but I get database errors from both BPEL and B2B following the installation. What is it about these two things that's incompatible? I assume there's some overlap?
Is there a repository creation assistant which lets you install both into the same database?

Sean - This is a limitation that we currently have, and it
is being enforced to ensure our future upgrades are not
affected by inserting the BPEL schemas into a standard
AS Metadata repository. This will be addressed
in the 10.1.2.0.2 of both the B2B Product and the BPEL
product.
For now I would suggest you keep the AS MR separately
and setup a separate store for the BPEL Metadata on
which you can run IRCA to create the schemas. That
would be the preferred model too - as the instance data
in the BPEL database could get large and would have to
be managed appropriately.
Thanks. Raj.

Similar Messages

10.1.3.3. BPEL and B2B

Can anyone please confirm whether the new SOASuite release 10.1.3.3 has been certified for B2B Integration (AS 10.1.2.0.2) as well ?
thanks
Shailesh
Message was edited by:
Shailesh

Hello Shailesh,
One possible ways of BPEL and B2B communication uses AQ as a handshaking point. This has to work in all BPEL version using AQ adapter to communicate to B2B. Right now
10.1.3.3 BPEL-B2B interoperability using WSIL is not yet certified. Please let us know.
Rgds,Ramesh

BPEL and Content Database

Hello,
is there a tutorial explainig how to upload and manage documents with BPEL in the Content Database?
thx for help
Matthias

Any kind of documentation would be helpful... e.g. some kind of Oracle Content DB Developers Guide ;)

Synchronous communication between BPEL and B2B

Hello All - I have below requirement. Can any one suggest good approach to this
1. Send a XML message from BPEL -- > Host Trading Partner -- > Target Trading Partner (WebService)
2. Receive XML response (Synchronous response) from Target Trading partner (cXML message) -- > Host Trading Partner -- > BPEL
Thanks,
Ramesh

Hi Ramesh,
This is very much possible from 11g PS6 onwards. Please let us know the patch set details.
Enabling Web-Service-Based Message Exchange - 11g Release 1 (11.1.1.7)
Regards
Nandagopal

CPU Patch for SOA BPEL -10.1.3.5 and B2B -10.1.2.0.4

We are in DOD -GOVT US marine corps.. WE are on 10.1.3.3.1 .. There is no CPU Patches for 10.1.3.3.1 nor
for 10.1.2.03-B2B
open issues/questions:
Open Issues:
1. What is Oracle's recommendation about upgrading 10.1.3.5 vs 10.1.3.4 (CPU Patch support length). Also CPU Patch support policy for BAM 10.1.3.3.1 and B2B 10.1.2.3.
2. Any MLRs to apply after upgrading SOA/BPEL/WSM/BAM/B2B 10.1.3.5 ?
3. Interoperability of OWSM 10.1.3.4, BAM 10.1.3.3.1, B2B 10.1.2.3 and SOA/BPEL 10.1.3.5. Can they co-exist or must they(one or more) be in same release level?
Thanks & Regards
Sri

Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks.

Problem inserting a clob using bpel and database adapter

We are having issues inserting a clob field into the database when the data is over 4000 characters. Anything under 4000 characters works fine.
The error we are seeing is "Error while converting to a Java struct object. Unable to convert XSD element P_RESPONSE_ARRAY_ITEM whole user defined type is QC_CRCBT_PKG_RESPONSE_TYPE. Cause: java.lang.ClassCastException: oracle.sql.CLOB; nested exception is: ORABPEL-11802"
We are using BPEL 10.1.3.3 and a database adapter. THE PL/SQL parameter decomposes to a clob type. Again, anything under 4000 characters works fine.
Any ideas?

This is likely due to Bug-6629539, which has just been identified and fixed in 11. You can request a one-off patch for this bug (i.e. a BLR off of the 10.1.3.3.0 release label).

How To : Call External Webservice from BPEL and pass SOAP Message to the WS

Hello All-
Greetings to all BPEL gurus. I am currently facing difficulties in calling an External Webservice from my BPEL Process and passing SOAP Message to it. The details are below:
1. The BPEL process, using database polling feature of DB Adapter, will get the records from the database.
2. Transform the message
3. Call the External Webservice and pass the transformed message as the input to it. However the Webservice expects the BPEL process to send SOAP headers in the input message.
I am struggling on how to put the transformed message within a SOAP envelope in the BPEL process.
If anyone had similar requirements and have successfully been able to send SOAP messages from BPEL process to an external webservice, kindly let me know.
Also if there is some kind of documentation or any link in the forum that I can refer, please let me know that as well.
I am new to Webservice integration using BPEL and would really appreciate your help.
Thanks In Advance
Regards,
Dibya

Hi Dharmendra,
I am trying to send a SOAP message from my BPEL process to a web service. I have a complete SOAP message in a complex variable defined in the wsdl for the partnerlink (web service). My problem is that when I invoke the partnerlink it fails even though the content shown in the BPEL console looks valid.
I have set up obtunnel to see what I am actually sending out from BPEL. You mention that BPEL creates the SOAP envelope automatically.
I think that my problem is a result of this automatic SOAP envelope that BPEL is creating. Do you know if there is a way to turn it off?
This is what I see in the TCP monitor, please note the double SOAP env:Body:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <env:Body> <RCMR_IN000002NR01 xmlns="urn:hl7-org:v3" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsa="http://www.w3.org/2005/08/addressing" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<env:Header>
<wsa:To xmlns:wsa="http://www.w3.org/2005/08/addressing">http://testhost/CCS/Service_Endpoint</wsa:To>
<wsa:From xmlns:wsa="http://www.w3.org/2005/08/addressing">
<wsa:Address>http://localhost/CCS/Service_Endpoint</wsa:Address>
<wsa:Metadata>
<device xmlns:hl7="urn:hl7-org:v3">
</device>
</wsa:Metadata>
</env:Header>
<env:Body>
<RCMR_IN000002NR01>
</RCMR_IN000002NR01>
</env:Body>
</RCMR_IN000002NR01>
</env:Body>
</env:Envelope>
Any help is appreciated.
Regards,
Aagaard
Edited by: Aagaard on Oct 30, 2008 8:59 PM
Should have mentioned. I am using BPEL 10.1.3.4
Edited by: Aagaard on Oct 31, 2008 8:43 AM
I have opened a new thread for this question so as to not confuse the issue more than necessary.
How many SOAP envelopes do you really need?

Purchase Order to Purchase Order using BPEL and/or XML Gateway

Hi,
Is there a way to do create a duplicate Purchase Order in another instance using BPEL and/or XML Gateway? We're looking to do A2A transactions, namely duplicating data from one instance to another (of course the functional setups would have to be the same). Thanks!!

this is the perfect usace for the upcoming ESB (shuffling data with transforming from A to B) - but this can be done with BPEL too .. there are some solutions to this
1) on a database level (db to db)
2) having events setup'ed in the master instance, that fire a process that get's the data
3) and then using the functions from iRep
hth clemens

Way to protect my bpel and esb jar (SOA 10g) from reverse engineering?

Hi All
We would be sharing our BPEL and ESB jars with some other company for deployment? Is there a way to protect them so that they are not able to peak into the contents of the jar?
If I extract the jar file, i can see all my XSD, WSDL, XSL, BPEL and ESB files as it is (the same as in JDEV)?
is there a way to protect them? Please help its urgent!

The use of a Trusted Platform Module (TPM) is a viable and extremely cost-effective alternative to the HSM, if the encryption and key-management application is designed properly. This is the approach we took when storing encrypted data and encrypted-keys within a database for our key-,management system. However, when using cryptographic hardware modules in your solution (that also meet regulatory requirements for split-knowledge and multiple key-custodians), your design for the solution must be carefully thought out to ensure that the implementation is reasonably secure and that it meets regulatory requirements. Storing an unencrypted key (or password that decrypts a PBE-based key) anywhere on a disk is an invitation for disaster.

Not able to connect to Oracle B2B database after restart of my system

Hi
I am getting this problem. Because of this problem I reinstalled B2B in my system 4 times till now.
This time I want to resolve this problem instead of reinstalling.
1. I instsalled B2B successfully, able to conenc to database, done some configurations in Oracle B2B, everythign is fine.
2. Restarted my system, I have kept starting of this database process as automatic.
3. I stopped the metadatarepository and started again, when I am tryign to connec to B2B database it is giving the below error:
Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
//B4b-5F-154-153Y.bdc4b.co.in:1521/orcl.bdc4b.co.in
I verified if it is taking the correct ORACLE_HOME for starting the database, it is correct,
I executed the below command:
lsnrctl seervices.
It is showing only the service, PLSExtProc. not the b2b database service: orcl.bdc4b.co.in.
tnsnames.ora is having the below two entries:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = B4b-5F-154-153Y.gdnindia.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.bdc4b.co.in)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = B4b-5F-154-153Y.gdnindia.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
could anybody tell me what can be the problem.

Hi Praveena,
This appears to be issue database connectivity
You might want to check if the listener is up. Also check for the error code.
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
this might of use to you:
Suddenly getting ORA-12514
ORA-27101: shared memory realm does not exist
Regards,
Dheeraj

BPEL AND WORKFLOW

Hi , sorry for my english , i am new working with BPEL and i want to know , if oracle bpel replace oracle workflow and it make´s that with TaskManager service or if you know some tecnology that make it ??
Thanks

thats means ... if i have a project with workflow , in this time , BPEL probably it´s not the better answer , because the client has full oracle infraestructure , database oracle , ias and portal and pl like front end, with a big effort of developers in portal , if they want new wfl , we need to continue work with older oracle workflow to oracle BPEL will be the new core of fusion middlewear ??

BPEL and RESTful WS

Does BPEL and Oracle AS support requesting a RESTful WS in a BPEL Process? If it is supported, which Service component (from jDev's Components Palette) can I use to request a RESTful WS?
Also, what is the "best" practice used in a BPEL Process to compare row of data returned from a WS to row of data in a database table? I was thinking about using an embedded Java that compares data returned from the WS and DBAdapter requests. Is this necessary?
Thanks in advance!

Hi,
I haven't worked much on RESTful WS, but they are usually like HTTP GET/POST method, and in that case you can leverage http binding (702.Bindings\HTTPBinding). You can marshal the return xml string in XML object.
Other way can be developing generic proxy service for calling RESTFul service is not very bad idea and exposing it is normal soap service.
HTH
Chintan

BPEL and Oracle 8

Are other people out there using BPEL with Oracle 8?
BPEL seems to only barely support Oracle 8 (Oracle8i Enterprise Edition Release 8.1.7.2.0) e.g.
with oracle 8, BPEL requires a database procedure to be owned by schema owner before it can be used in BPEL ... I don't think this is the case with BPEL and oracle 9
with orace 8, the retry ability as per bpel.xml can have some retry schedule extra retry due to socket read error .. (works eventually)
with oracle 8, you have to manually alter toplink setting to pick up date and time rather than just date ... this is not the case with BPEL and oracle 9
i.e. you can make BPEL work with Oracle 8 but it takes some doing!!

Can you use WebLogic 8.1 SP4 ? BPEL has been certified with that version. We have been able to reproduce the issue and currently investigating the cause of it.

Integrate XML GW and B2B

Hi Ramesh,
We are planning to integrate XMLGW and B2B. We are wondering about the following:
We know that we send documents to B2B using EDI X12 format. Now XML GW receives the docs using OAG format.
So, If B2B receives an 850 from my customer, will it convert that into OAG XML format and automatically load into XMLGW delivery channel (if that is used?)
Requesting your advice in this regard.
Thanks
Shamik

Hello,
The best practice is to send the message to BPEL from B2B and get it transformed into OAG XML and send it to Ebiz suite using Oracle Apps adapter. Alternatively you might want to transform the xml to OAG format using B2B callout and sent it to the XML Gateway Queues. However this is not a prefferred approach.
HTH.
Rgds,Ramesh

Log on to remote server and start database -error while installing CI in HA

Hello All,
We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node. Please find the log below.
TRACE 2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 25742
INFO 2011-06-10 16:31:45.835
 CJSlibModule::writeInfo_impl()
Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
WARNING 2011-06-10 16:31:46.345
 CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
Database PE2 must be started on remote server
Log on to remote server and start database
WARNING[E] 2011-06-10 16:31:46.355
 CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
 handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2011-06-10 16:31:46.355
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
WARNING[E] 2011-06-10 16:31:46.355
 CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 25793
ERROR 2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </body></html>
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly let us know how to rectify the error and prroceed further with the instalaltion.
Thanks
Rishi

Dear Guys,
we didnt change the date and time but i m very sure it is same trans.log file.
for your kind information please note SID and Nodes details
Sid (PE2)
DB Node : DBMDB001
CI Node : DBMCI001
also i am attaching starting part of the file.
4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.11.2010 - 03:44:06
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Nov 7 03:44:06 2010 295 0.000295
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000317
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 116 0.000433
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
4 ETW000 64 0.000497
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 32161 0.032658
4 ETW000 [dev trc ,00000] Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
4 ETW000 39 0.032697
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 111 0.032808
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
patchlevel (0.25)
4 ETW000 265 0.033073
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 41 0.033114
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 82 0.033196
4 ETW000 [dev trc ,00000] New connection 0 created 52 0.033248
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.033289
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 84 0.033373
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 31 0.033404
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.033441
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 601 0.034042
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 25 0.034067
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 35674 0.069741
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
4 ETW000 57 0.069798
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 55 0.069853
4 ETW000 [dev trc ,00000] Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
151208)
4 ETW000 34 0.069887
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 52 0.069939
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 58 0.069997
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.070037
4 ETW000 [dev trc ,00000] Allocating server context handle 27 0.070064
4 ETW000 [dev trc ,00000] Attaching to DB Server PC1
(con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
4 ETW000 63 0.070127
4 ETW000 [dev trc ,00000] Assigning server context 0x600000000106de78 to service context
0x600000000106aa68
4 ETW000 60612 0.130739
4 ETW000 [dev trc ,00000] Allocating user session handle 97 0.130836
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0,
usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 64 0.130900
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 9302 0.140202
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
4 ETW000 198 0.140400
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;
4 ETW000 38 0.140438
4 ETW000 [dev trc ,00000] CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
erroneous calls
4 ETW000 291 0.140729
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
4 ETW000 33 0.140762
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 35 0.140797
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 937 0.141734
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.141770
4 ETW000 [dev trc ,00000] Connected to session 297. 639 0.142409
4 ETW000 [dev trc ,00000] Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
4 ETW000 38 0.142447
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 37 0.142484
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 36 0.142520
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 327 0.142847
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 36 0.142883
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 728 0.143611
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 38 0.143649
4 ETW000 [dev trc ,00000] Rolling back transaction ... 31 0.143680
4 ETW000 [dev trc ,00000] Closing user session
(con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
4 ETW000 210 0.143890
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 721 0.144611
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
700 151208)
4 ETW000 40 0.144651
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 37 0.144688
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 37 0.144725
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 35 0.144760
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 40 0.144800
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 337 0.145137
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 4085 0.149222
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
4 ETW000 63 0.149285
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 37 0.149322
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 585 0.149907
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.149943
4 ETW000 [dev trc ,00000] Connected to session 297. 350 0.150293
4 ETW000 [dev trc ,00000] Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
session_id=297.
4 ETW000 38 0.150331
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.150369
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 34 0.150403
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 294 0.150697
4 ETW000 [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
4 ETW000 66 0.150763
4 ETW000 [dev trc ,00000] ETER
4 ETW000 34 0.150797
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 329 0.151126
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 856 0.151982
4 ETW000 [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
4 ETW000 36 0.152018
4 ETW000 [dev trc ,00000] DB instance PC1 is running on scmdb001 with ORACLE version
10.2.0.4.0 since NOV 07, 2010, 03:23:10
4 ETW000 349 0.152367
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.152405
4 ETW000 [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
FROM V$DATABASE

BPEL and B2B Databases

Similar Messages

Maybe you are looking for