BPEL consuming wsdl & perform operations in DB.

Hi,
Please help me out its very urgent.I have wsdl's out of which i have to consume this wsdl's and perform operations on DB and read the data and send it back to the DB
e.g. i have two databases i have read from one DB perform operation given in the wsdl's store the info in other DB then send it back to the same DB

Irfan,
Sorry..I didn't realy understand your need
You want to read from DB A and insert the data into DB B?
Arik

Similar Messages

"Cannot perform operation, connection is closed" with Open MQ 4.4

I am using Sun MQ 4.4 with Glassfish 2.1.1 on Red Hat 5.7.
I am able to install glassfish cluster and all the instances are running fine. But, when I try to send a message to a topic, I get following exception
javax.jms.IllegalStateException: [C4062]: Cannot perform operation, connection is closed.
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.checkConnectionState(ConnectionImpl.java:2468)
at com.sun.messaging.jmq.jmsclient.XAConnectionImpl.createSession(XAConnectionImpl.java:105)
at com.sun.messaging.jms.ra.ConnectionAdapter.createSession(ConnectionAdapter.java:383)
Following is part of the stateless EJB where I am creating the session.
@PostConstruct()
private void init() {
if (connectionFactory == null) {
if (log.isTraceEnabled()) log.trace("Connection factory not set. Retrieving from server context.");
InitialContext ic = new InitialContext();
connectionFactory = (ConnectionFactory) ic.lookup("jms/testConnectionFactory");
if (log.isTraceEnabled()) log.trace("Creating JMS connection.");
connection = connectionFactory.createConnection();
@WebMethod()
public void send(){
Session session = null;
session = connection.createSession(true, Session.SESSION_TRANSACTED);
I am trying to install these on a couple of new machines. Same application works on other machines so I am guessing this is a configuartion issue somewhere on these servers.
My question is what would be a good way to find the cause of this failure.
I have turned on log level to finest for ejb-container, jms, RA through glassfish Admin console, but no useful information.
Also, I don't have the name of the servers in DNS yet. I am using IP address for specifying instances.
Any suggestions ?
Thanks
Vineet

Hi Tom,
I used the demo/helloworld/helloworldmessage.java sample.
By the way, I should add that the broker log contains lines like:
[B1066] Closing [email protected]:2461 because "[B0061]: Client exited without closing connections"
Is this what one would expect for a connection.close() ?
It almost seems that this is happening only when the connection is nulled explicitly or the connection object is destroyed.
One last thing:
I was led down the garden path. The reason for the server being thread starved was that there were indeed connections not being closed/nulled.
Thanks in advance,
Patrice
Edited by: paubry04 on Sep 13, 2007 8:21 AM

Performance operations based on Column values in SQL server 2008

Hi ,
I have a table which consist of following columns
ID    Formula
Values
DisplayValue
1
a*b/100       100*12/100
      null
2
b*c/100
12*4/100
null
I want to perform operation based on column "Values" and save data after operations in new column Name "Display Value" .i.e I want to get the below result . Can anyone please help.
ID    Formula
Values
DisplayValue
1
a*b/100       100*12/100
      12
2
b*c/100
12*4/100
0.48
Thanks for the help.
Regards, Priti A

Try this,
create table #mytable (ID int,Formula varchar(10), [Values] varchar(10), DisplayValue decimal(10,4))
insert into #mytable values(1 ,'a*b/100','100*12/100',null)
insert into #mytable values(2 ,'b*c/100','12*4/100',null)
declare @rowcount int=1
while @rowcount <= (select max(id) from #mytable)
begin
declare @expression nvarchar(max)
select @expression=[values] from #mytable where id = + @rowcount
declare @sql nvarchar(max)
set @sql = 'select @result = ' + @expression
declare @result decimal(10,4)
exec sp_executesql @sql, N'@result decimal(10,4) output', @result = @result out
update #mytable set DisplayValue= @result where id = @rowcount
set @rowcount=@rowcount+1
end
select * from #mytable
Regards, RSingh

How to consume WSDL from SR in PI 7.1

Hi,
How to publish WSDL into SR. How to consume WSDL from SR. Can anybody guide me step by step.
Thanks & Regards,
Venkat K

Hi venkat,
Check out the blog : /people/daniel.graversen/blog/2008/02/27/publish-services-from-pi-71-to-the-service-registry
also : https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0f3cf81-e6da-2a10-6891-ef321fdc1a6b
Thanks,
Pooja Pandey
Edited by: Pooja Pandey on Jan 27, 2009 10:26 AM

How to perform operations on table control

hello experts,
will u plz tell me how to perform operations like delete and update on tablecontrol in module pool.
thanks in advance,

Hey Aravind,
In case you want to delete just from your table control and not from database table, then you can use the commands:
clear <workarea_name>
delete <workarea_name>
for your selected rows.
And for deleting from database tables also, use:
Delete from <Database_table_name> where <where_clause>.
clear <workarea_name>
delete <workarea_name>
This will delete both from the table control and database table also.
Reward if it proved useful to you.
Regards
Natasha Garg

[INS-06001] Failed to perform operation due to internal driver error

I'm installing GI 11.2.0.4 on the zone of solaris(SPARC) 11.1.
Among executed runInstaller, the following error occured when
"setup" button is pushed for checking SSH connectivity
on "Secify Cluster Configuration(Step 4 of 9)" section.
[INS-06001] Failed to perform operation due to internal driver error.
Additionally, the following was output by a console executed runInstaller.
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGBUS (0xa) at pc=0xffffffff3df832fc, pid=14407, tid=38
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_51-b10 mixed mode)
# Problematic frame:
# C [libc.so.1+0x832fc]
# An error report file with more information is saved as hs_err_pid14407.log
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
Does anyone know the solution for this issue?
The configuration of the system is the following.
+--------------------------------------------+
|         testserver (global zone)           |
|+------------+                +------------+|
||   zone1    |                |   zone2    ||
||      +-----| +----------+ |-----+      ||
||      |vnic3|--|etherstub1|--|vnic4|      ||
||      +-----| +----------+ |-----+      ||
||            |                |            ||
|| +-----+   |                | +-----+   ||
|| |vnic1|   |                | |vnic2|   ||
|+------------+                +------------+|
|      |         +----------+        |       |
|      +---------|etherstub0|--------+       |
|                +----------+                |
|                     |                      |
|                  +-----+                   |
+------------------|vnic0|-------------------+
                   +-----+
zonecfg:kudotest01> export
create -b
set brand=solaris
set zonepath=/zones/kudotest01
set autoboot=false
set ip-type=exclusive
add net
set configure-allowed-address=true
set physical=vnic1
end
add net
set configure-allowed-address=true
set physical=vnic3
end
add anet
set linkname=net0
set lower-link=auto
set configure-allowed-address=true
set link-protection=mac-nospoof
set mac-address=random
end
add device
set match=/dev/dsk/c0t600144F00010E010379A5491444F0001d0
end
zonecfg:kudotest02> export
create -b
set brand=solaris
set zonepath=/zones/kudotest02
set autoboot=false
set ip-type=exclusive
add net
set configure-allowed-address=true
set physical=vnic2
end
add net
set configure-allowed-address=true
set physical=vnic4
end
add anet
set linkname=net0
set lower-link=auto
set configure-allowed-address=true
set link-protection=mac-nospoof
set mac-address=random
end
add device
set match=/dev/dsk/c0t600144F00010E010379A5491444F0001d0
end
zonecfg:kudotest02>
testserver:~# dladm show-vnic
LINK                OVER         SPEED MACADDRESS        MACADDRTYPE       VID
vnic0               etherstub0   40000 2:8:20:b5:32:c1   random            0
vnic1               etherstub0   40000 2:8:20:45:a2:af   random            0
vnic2               etherstub0   40000 2:8:20:86:7e:4e   random            0
vnic3               etherstub1   40000 2:8:20:8a:96:a    random            0
vnic4               etherstub1   40000 2:8:20:ef:f3:dd   random            0
root@kudotest01:~# ipadm show-addr
ADDROBJ           TYPE     STATE        ADDR
lo0/v4            static   ok           127.0.0.1/8
vnic1/v4          static   ok           192.168.120.2/24
vnic3/privaddr    static   ok           192.169.120.2/24
lo0/v6            static   ok           ::1/128
vnic1/v6          addrconf ok           fe80::8:20ff:fe45:a2af/10
root@kudotest02:~# ipadm show-addr
ADDROBJ           TYPE     STATE        ADDR
lo0/v4            static   ok           127.0.0.1/8
vnic2/v4          static   ok           192.168.120.3/24
vnic4/privaddr    static   ok           192.169.120.3/24
lo0/v6            static   ok           ::1/128
vnic2/v6          addrconf ok           fe80::8:20ff:fe86:7e4e/10

Please check https://hiteshgondalia.wordpress.com/2012/12/08/ssh-setup-fail-unable-to-find-ssh_host_rsa_key-pub/, Oracle Application DBA: [INS-06001] Failed to perform operation due to internal driver error (During installation of RAC…

Error #3200: Cannot perform operation on closed window.

hi,
I'm simply trying to open a new window in a CS extension but when testing it inside Premiere as well as Illustrator it gives me the error
Error #3200: Cannot perform operation on closed window.
When I test it as a standalone desktop app, it works fine.
I tried it with an mxml Window component, and also with code, like:
var newWindow:Window = new Window()
newWindow.title = "New Window";
newWindow.width = 200;
newWindow.height = 200;
newWindow.open(true);
I'm using a WindowedApplication.
Flex 3.5
AIR 2.7
Flash Builder 4.5 (not using Extension Builder)
thanks!
Jeff.

thanks Harb, I'm looking CSXSInterface now. But I don't see anything in the api that points at openening a new window. Do you mean
that I should build another extension and load it using requestOpenExtension or should i communicate with some script uing evalScript?
So what I mean is just open a new AIR window on top of my air cs extension. And display an mxml component in that new window, filled with data that is stored in my extension.
An example, some code or any further directions would be appreciated,
Jeff.

"Invalid Thread Access" - Consuming WSDL in OSB

Hi,
Creating a business service I am trying to define the service type by consuming WSDL. I get the error "Invalid Thread Access" with no additional details.
The URI is accessible in my browser and works when i import it into jdeveloper. through soapUI, I can able to test this service.
The interesting point here is I am not able to ping that server. (cmd-->ping service name). Here my doubt is do they(as Am invoking third party service) need to open any port for us or not.
Please advice me
Thanks,

Thank you Vlad, I want to tell you some thing about this WSDL.
Size of the wsdl : 5.60 MB and It has 93,671 lines of coding in that file. Is it causes problem
or
Am invoking CRM Web Service and they clearly mention in my mail that "Please use HTTPS because SSL has been applied to your sites"
do I need to create key store for their Certificates.
Please Advise me.
Thanks,
Viswas

When I try to work with the publish window of lightroom cc, I am told that I do not have permissions to perform operations (remove picture, etc.)

When I try to work with thhe publish window of lightroom cc, I am told that I do not have permissions to perform operations (remove picture, etc.). I also notice that when the particular picture is selected, another show in its place, and I cannot change the collection.

To diagnose problems with Thunderbird, try the following:
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Performing operations on an open ("locked") document [JS] [CS5]

Hello!
We use JavaScript InDesign scripts, run on InDesign CS5 server, to create PDF proofs and JPEG previews of documents.
We are running into problems with doing these tasks if the document is open or an operation is already being performed - because the file is "locked".
After some searching, I found the enumeration, "OpenOptions.openCopy" option. Using that option in code allows us to perform operations on a "locked" document.
http://www.indiscripts.com/blog/public/data/so-what-s-new-in-indesign-cs5-scripting-dom/en _ID-CS5-DOM-WhatsNewEnum.pdf
CODE:
var myDoc = app.open("C:/InDesign/2100125319.indd", OpenOptions.openCopy);
My questions are:
1. When we use the "OpenOptions.openCopy" to open a copy of the document, does it open it in memory or create a new file?
2. Is there a downside to opening the document this way and/or a better way to do it?
Thanks in advance!
Jeff

I do understand you're trying to be helpful. I was just hoping providing the relevant code snippets would be sufficient so I didn't have to take the time to provide a "cleaned" version of the files and upload those to a public-safe location.
Zabeth69 wrote: If you don't understand what 'code at the bottom of the page' means, you have not used one of those systems. I don't know what causes the error code to come up (besides removing a Spry widget, I mean). So if it doesn't apply to you, ignore it.
This is exactly my point: I haven't used any of the DW "systems". I've always manually coded in DW, so I can't have removed a Spry widget in the first place. It wasn't until I installed the Widget using the Widget Browser that I started getting the error (I don't mean adding the datepicker widget to the code using the DW Insert menu - I mean installing the Widget into DW itself). Ignoring such an erroneous/incorrect error seems kind of silly, since every time I open the file I get the error message.
Anyway, as requested, the following are links to the contactUsCleaned.php page, and the php included headerCleaned.php file. Since these use php includes to complete the rendered HTML, they won't look right in the browser, but as you know viewing the source will show the relevant html, javascript, and jquery code. I didn't see any way to upload the files in this forum, which, due to the php code, would be preferable to see exactly what my code looks like...
http://www.eventidewebdesign.com/public/contactUsCleaned.php
http://www.eventidewebdesign.com/public/headerCleaned.php
The footer.php file the contactUs page includes is simply a set of HTML links to the pages on the site, copyright info, and the Google Analytics script. There is no other code in the footer.php file.

Missing boot events on the Diagnostic performance operational log (event-id 100)

I noticed that event (100) is not always reported or not reported at all on several machines and I would like to understand how can I force reporting it.
In addition I would appreciate if you can explain regarding the keys under:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\Boot]
Things I've already tested on win7:
1. Verified that the diagnostic performance > operational log is enabled
2. Services: ‘Diagnostic Policy Service’ (auto) and ‘Diagnostic service host’ (manual) were running
3. Verified that GPO is not disabled for:
- Computer Configuration\Administrative Templates\System\Troubleshooting
- Diagnostics\Windows Boot Performance Diagnostics Computer Configuration\Administrative Templates\System\Troubleshooting and Diagnostics\Diagnostics: Configuration scenario executing level
Thanks,

For keys under [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\Boot]
Please take a look of discussions in this link(reply posted by David J)
Diagnostics-Performance log Event 100 - Critical, Error, or Warning - when and why?
http://social.technet.microsoft.com/Forums/windows/en-US/48005f5d-5f66-439a-af51-3a2ebb894e31/diagnosticsperformance-log-event-100-critical-error-or-warning-when-and-why?forum=w7itproperf
My understanding to this issue—“event (100) is not always reported or not reported at all on several machines”
is that : this kind event log occurs when an time parameter during the boot process reaches a threshold in the registry key, then a warning, critical or error message will appear in the event viewer. If it doesn’t reach the threshold, then there will be
no report.
Regards
Yolanda
TechNet Community Support

Audition CS6 - "An error was encountered: Not enough memory to perform operation"

When I try to export my entire session using the "Multitrack Mixdown" I get this error message: "An error was encountered: Not enough memory to perform operation"
To give context:
• Audition CS6
• All other applications are closed
• 26 audio tracks
• Approx. 22 seconds long in total
• Average of 2 effects per track
• I've reinstalled the program twice now
My computer:
• iMac (2010)
• 3.4GHz Intel Core i7
• 16 GB 1333 MHz DDr3
• Flash and HDD storage (which are not full)
• OSX 10.8.2
If anyone can offer any advice, that would be great!
I have to get this done by this Monday (May 6, 2013).
So I really hope Audition won't fail me, since it has always been successul until now (which is why I'm stumped).

'Not enough memory' hasn't got anything to do with your HD, but the amount of RAM available to Audition at the time it needs it. All DAWs, to work efficiently and successfully, need most of the machine to be free from running other apps. The reason for this is simple; If another app trys to hog a machine that's running a process in real time, it inevitably hiccups the machine. And if this other app has reserved RAM addresses for its own use, they aren't available until it's stopped.
Typical nasties involve anti-virus software, and the machine doing things like repeatedly polling a wireless connection, but there are plenty more, and this applies equally to Macs and PCs.
So the 'update' you need to rectify most of these problems is one you have to carry out yourself. Audio editing is a bit of an oddball from this POV - you invariably need a very lightly loaded machine for it to be reliably successful. The machine I use as a DAW doesn't do anything else at all; all unnecessary services are stopped whilst it's in this mode, and the physical spec of it is similar to yours - except it's a PC running W7-64Pro.

VISA: (Hex 0xBFFF003E) Could not perform operation because of I/O error

Hello
I'm trying to communicate with a device which have to be tested with my application. So I send it a command to initiate the device to send me back some values. This values are sended continously with a baud rate of 57600.
I create a VI to test this communication but I always get the error:
VISA: (Hex 0xBFFF003E) Could not perform operation because of I/O error
I have googled for this thread, but all the described solutions didn't solve my problem (ex. Set Buffer Size to 48, Various Byte Count Values for the VISA Read function, etc.).
Note: the VI works properly in the LabView 6.1! I have tested. I also tried to receive the Data with a Termial programm (works fine). But another COM Port (on an USB Serial converter) shows me the same Error.
I just updated to Visa 3.4.1, but no success
LabView 8.0.1

Yeah it works
of course buffer to 4096 and mask to 48
I added a Flush I/O buffer (mask 16) before reading from Visa (problem was to read data).
And suddenly it works fine.
I can't reproduce where the error exactly was. Could it be possible that the RX buffer was already full
at the time I would to read from Visa or at the time the COM port received data? There are some questions to find out:
how does LV handle the buffers? will the buffers be cleared if LV starts? when does LV flushes the
buffers?
thx

Cannot perform operation, the repository is not presented on any servers.

Hi
I have pool : lanz
and under this pool there is 2 server
Now
there is 2 nfs share
nfs-pool->(Main one)
nfs:/mnt/vm/nfs/ovm
nfs:/mnt/pool/serverpool/serverpool
nfs:/mnt/pool/repository/myrepo
now I have added 2 nfs share into repository.
nfs:/mnt/pool/serverpool/serverpool : Server A
nfs:/mnt/pool/repository/myrepo
Server has permission on nfs:/mnt/pool/serverpool/serverpool
but when i am trying to give permission Server B on nfs:/mnt/pool/repository/myrepo
it does not show up on Server list from : home->repository.
so When i try to create vm under Serer B, the Repository is always empty.
I did refresh nfs:/mnt/pool/repository/myrepo with Server B
but still it does not allow Server B to use this repo
is there any special thing i need to ??
when i try to delete nfs:/mnt/pool/repository/myrepo from repository i see the error :
OVMRU_002006E: nfs:/mnt/pool/serverpool/serverpool - Cannot perform operation, the repository is not presented on any servers.
Please advise ..

I haven't found a way to resync. Doing a rediscover doesn't do a thing. I do see in the ovs-agent.log where the server does resync with the manager but it doesn't make any difference when it comes to the repository.
Anyone know how to reset the DB for the manager and then maybe it can resync with the servers?
I was hoping for a way to force sync with the VM 3.0 servers and the database. The problem appears to be that the maintenance of the repository is a manager function now and just uses the servers to do the work. Somehow the servers are out of sync with the manager. The servers think they are still connected properly but the manager thinks they are disconnected, with the exception that if you highlight the repository in the manager it shows the servers are currently presented the repo. When I try to do anything with the repo the manager says no servers are available to do the work.
Thanks
Bill

[OSB] "Invalid Thread Access" - Consuming WSDL

Creating a business service I am trying to define the service type by consuming WSDL. I get the error "Invalid Thread Access" with no additional details.
The URI is accessable in my browser and works when i import it into jdeveloper.
Working on Oracle Linux in Eclipse OSB
Any help would be great.
Thanks,
Nick

Thank you Vlad, I want to tell you some thing about this WSDL.
Size of the wsdl : 5.60 MB and It has 93,671 lines of coding in that file. Is it causes problem
or
Am invoking CRM Web Service and they clearly mention in my mail that "Please use HTTPS because SSL has been applied to your sites"
do I need to create key store for their Certificates.
Please Advise me.
Thanks,
Viswas

BPEL consuming wsdl & perform operations in DB.

Similar Messages

Maybe you are looking for