Missing boot events on the Diagnostic performance operational log (event-id 100)
I noticed that event (100) is not always reported or not reported at all on several machines and I would like to understand how can I force reporting it.
In addition I would appreciate if you can explain regarding the keys under:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\Boot]
Things I've already tested on win7:
1. Verified that the diagnostic performance > operational log is enabled
2. Services: ‘Diagnostic Policy Service’ (auto) and ‘Diagnostic service host’ (manual) were running
3. Verified that GPO is not disabled for:
- Computer Configuration\Administrative Templates\System\Troubleshooting
- Diagnostics\Windows Boot Performance Diagnostics Computer Configuration\Administrative Templates\System\Troubleshooting and Diagnostics\Diagnostics: Configuration scenario executing level
Thanks,
For keys under [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\Boot]
Please take a look of discussions in this link(reply posted by David J)
Diagnostics-Performance log Event 100 - Critical, Error, or Warning - when and why?
http://social.technet.microsoft.com/Forums/windows/en-US/48005f5d-5f66-439a-af51-3a2ebb894e31/diagnosticsperformance-log-event-100-critical-error-or-warning-when-and-why?forum=w7itproperf
My understanding to this issue—“event (100) is not always reported or not reported at all on several machines”
is that : this kind event log occurs when an time parameter during the boot process reaches a threshold in the registry key, then a warning, critical or error message will appear in the event viewer. If it doesn’t reach the threshold, then there will be
no report.
Regards
Yolanda
TechNet Community Support
Similar Messages
-
Diagnostics-Performance No Log win7
I have a issue to retrieve Diagnotics- Performance log in window 7. In Diagnotics-Performance have 0 number of events
I had been try out all the finding in google. I had try:
1. Verified that the diagnostic performance > operational log is enabled
2. Services: ‘Diagnostic Policy Service’ (auto) and ‘Diagnostic service host’ (manual) were running
3. Verified that GPO is not disabled for:
- Computer Configuration\Administrative Templates\System\Troubleshooting
- Diagnostics\Windows Boot Performance Diagnostics Computer Configuration\Administrative
Templates\System\Troubleshooting and Diagnostics\Diagnostics: Configuration scenario executing level
4. sfc /scannow
5. window repair tool
6. C:\Windows\System32\winevt - provide full access right
Any one have any idea how to resolve my issue. TQHi,
This log reports potential performance issues with the client by alerting on drivers, services, or applications that experience resource contention or take too long to respond during the "sleep", "resume", and "reboot" operations. so my first thought is
that maybe you don't have issue like these.
Any way, another location you might need to check is HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\
When system boot or shutdown time or something else reach threshold value in this registry entry, a warning\error will be recorded in diagnostics-performance/operational log
As an alternative way, you can also use sysinternals tools like Process Monitor\Explorer or Windows Performance Toolkit to trace the performance issue
http://blogs.technet.com/b/yongrhee/archive/2013/10/15/tool-windows-performance-toolkit-xperf-wprui-and-wpr-updated-version-as-of-aug-2013.aspx
http://technet.microsoft.com/en-in/sysinternals/bb795533.aspx
Yolanda Zhu
TechNet Community Support -
How to delete Diagnostic & Usage Data logs?
Is there a way to delete the diagnostics and usage data from the iPhone 4S? If so, I don't see it. Seems to me that if these diagnostics and crash logs just continue loading without being deleted, they'd eventually eat up memory? I have it set to NOT automatically send to Apple, since that probably uses up more battery power.
Even after sync the iPhone with the iTunes, the logs are still there!
Does anyone know if Apple is trying to fix this or provide users some information about what's going on here?just plug in the iphone to your computer that you have used to set up the iphone or ipod touch to clear the Diagnostic & user data logs. Also make sure you fix why the app crashed either by calling the app maker or email the maker of the app to tell them about it or delete the app because other wise this will eat up battery power on your Iphone.
-
On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key. -
I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!
lan drivers*
-
Hi I'm missing several events in my iPhoto library following my last import. If I open up Aperature to access the library I see all of my events, does this mean my library is corrupt? I've already tried repairing the iphoto database, rebuilding the thumbnails, and rebuilding permission all without success. My last option is rebuild the database. Has anyone seen this issue?
I don't use Aperture so don't know how it works in relation to viewing the same library as iPhoto. There may be some cache that Aperture is viewing.
You can also try this:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox. -
Hi All,
My mac book pro 13". It boots ok and skype launches on boot up. connects to internet etc. However, whilst the mouse moves around the scren ok, used via the track pad, I cannot open anything, close anything, or get the task bar to pop up.
I can close the laptop down via the power key, and can use some short cut keys, but the track pad operation is iffy, can you suggest how I rectify this.
I have now solved this, for future reference, I have a magic track pad as well and that was connected via bluetooth and sitting else where in the house. It blocked the laptops trackpad operations. When disconnected, my laptop track pad works fine.
Cheers
Jazzy
Message was edited by: Method TVHi All,
My mac book pro 13". It boots ok and skype launches on boot up. connects to internet etc. However, whilst the mouse moves around the scren ok, used via the track pad, I cannot open anything, close anything, or get the task bar to pop up.
I can close the laptop down via the power key, and can use some short cut keys, but the track pad operation is iffy, can you suggest how I rectify this.
I have now solved this, for future reference, I have a magic track pad as well and that was connected via bluetooth and sitting else where in the house. It blocked the laptops trackpad operations. When disconnected, my laptop track pad works fine.
Cheers
Jazzy
Message was edited by: Method TV -
When I try to work with thhe publish window of lightroom cc, I am told that I do not have permissions to perform operations (remove picture, etc.). I also notice that when the particular picture is selected, another show in its place, and I cannot change the collection.
To diagnose problems with Thunderbird, try the following:
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates. -
Trouble exporting: "the requested export operation cannot be performed"
I've been exporting different sequences (from the same project) using the same same settings all week but now suddenly when I try to export a sequence I keep getting the message: "the requested export operation cannot be performed". I have not changed any settings that I can think of and am really puzzled as to why FCP won't let me export. Also I keep getting a lot of "general error" messages while klicking in the timeline of the sequence. At first I thought it had something to do with too little hard disk space, but surely 380 GB should be plenty? Could it have to do with too little memory (running imac 3.06 GHz, 2GB memory)? Seems strange if it's a memory issue as I've been able to export all my other sequences using the same settings.
I'm exporting HDV 1080i footage to HD h264.
Any advice much appreciated!First, do you have any cmyk graphics?
Second, in my workflow, I almost always export from fcp with sequence settings and then do the compression in compressor. You might try that.
2gigs is not alot of memeory. You might try copying JUST your sequence to a new project and trying to export with just the new project open. Also, do you have plenty of hard disk space available on your startup drive. This is crucial as OSX swaps out memory to your startup drive when it runs out of ram. -
If we missed the live performances from SXSW, will we still be able to watch the performances after the artists have performed?
Yes, the app has a feature to playback the concert. I missed London Grammar and Imagine Dragons, but watched Coldplay. They were really excellent. Do love Apple for bringing this to us.
-
Cannot perform operation, the repository is not presented on any servers.
Hi
I have pool : lanz
and under this pool there is 2 server
Now
there is 2 nfs share
nfs-pool->(Main one)
nfs:/mnt/vm/nfs/ovm
nfs:/mnt/pool/serverpool/serverpool
nfs:/mnt/pool/repository/myrepo
now I have added 2 nfs share into repository.
nfs:/mnt/pool/serverpool/serverpool : Server A
nfs:/mnt/pool/repository/myrepo
Server has permission on nfs:/mnt/pool/serverpool/serverpool
but when i am trying to give permission Server B on nfs:/mnt/pool/repository/myrepo
it does not show up on Server list from : home->repository.
so When i try to create vm under Serer B, the Repository is always empty.
I did refresh nfs:/mnt/pool/repository/myrepo with Server B
but still it does not allow Server B to use this repo
is there any special thing i need to ??
when i try to delete nfs:/mnt/pool/repository/myrepo from repository i see the error :
OVMRU_002006E: nfs:/mnt/pool/serverpool/serverpool - Cannot perform operation, the repository is not presented on any servers.
Please advise ..I haven't found a way to resync. Doing a rediscover doesn't do a thing. I do see in the ovs-agent.log where the server does resync with the manager but it doesn't make any difference when it comes to the repository.
Anyone know how to reset the DB for the manager and then maybe it can resync with the servers?
I was hoping for a way to force sync with the VM 3.0 servers and the database. The problem appears to be that the maintenance of the repository is a manager function now and just uses the servers to do the work. Somehow the servers are out of sync with the manager. The servers think they are still connected properly but the manager thinks they are disconnected, with the exception that if you highlight the repository in the manager it shows the servers are currently presented the repo. When I try to do anything with the repo the manager says no servers are available to do the work.
Thanks
Bill -
Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks
LaCie doesnt make ANYTHING. It contains a Seagate 3.5" 5400RPM HD.
Check the HD on another computer, if nothing, your SATA bridge is fried, or the HD (very unlikely since its a Seagate inside)
Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
those external HD use a 50 cent SATA bridge famous for failing. The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
Sata bridge: -
Why don't my photos appear as they do in iPhoto on my Apple Computer. Even though I specify to sync all Events, Faces, etc. the iPad 2 is missing Faces categories and the Events are in a different order.
1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2 -
Dear all,
sorry for opening another thread on this.
I think I have a performance issue with workflows attached to document sets in SharePoint. And I say “I think” because people keep telling me that this is the way it just is.
The user creates a new document set, which triggers a workflow in which the user has to confirm/review/approve a series of tasks. The time it takes from clicking the OK button on those task form to the workflow status moving to the next step is about 4 seconds.
And visiting that status page within those 4 seconds brings up the infamous “Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.” message.
Hitting Refresh in the browser after those 4 seconds will make the new workflow status appear and the red text go away.
Is that normal? Is that the performance that everyone else is seeing as well?
I struggle to see why simply moving a workflow from one task to another should take that on a machine that isn’t doing anything else at the time.
(1)
I have a standalone (non-clustered) SharePoint box, 4 CPUs, 8 GB of memory, more than half of that available, acting as application server and wfe; only the database is on different box.
(2)
The CPU only goes up to 18 or 19%, so CPU does not seem to be the bottleneck. Half the RAM is also still free.
(3)
The workflow is designed with Nintex, and has about 9 flexi and review tasks – the last 2 of them in a loop iterating over typically 3 or 4 items.
(4)
Looking at the logs it looks like the processing in Nintex only takes about 1 second – I don’t know where the other 3 seconds are going.
(5)
There is nothing obvious in the logs.
(6)
We’ve looked at all the “theoretical” improvements around throttling and batch sizes etc. – none of them appeared make any difference. And the workflow is so small that it looks like my tasks gets executed straight away. The problem appears
to be that the execution takes too long(?) and therefore has not finished by the time the page get redrawn.
(7)
I am running perfmon and I can e.g. see one(!) workflow being loaded into memory – as expected as I am the only user.
(8)
I am seeing a total of 3(?) SQL queries being executed(?). I get the Bytes Sent/sec spiking at 25K, and Bytes received at 18K. But is this good or bad or a bottleneck?
Where do I take it from here?
I have been told that “[…] most customers have no issue with this as they are used to the way SP operates and it can be slow at times.” Is it really that bad?
If it is worth watching more performance counters then I’d need to know what to compare them to.
Is there something else I am missing?
Thanks
MartinHi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig | Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold 100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig | Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize 200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/ -
hello,
i getting the following error message in event id while backing up my SQL db by third party backing tool
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'CA_BAB_MSSQL_e85860_10001_2085d987_ERP_DATABASE_ST_1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
<Data>995(The I/O operation has been aborted because of either a thread exit or an application request.)
please suggest the solution.Hi pulkit,
According to your description, the actual error could be caused by but not limited to the following issues: Memory issues, Third Party issues, or SQL Server issues and so on. However, as shanky post, if you use an external or third party backup tool like
NetBackup, BackupExec, or one of the many other tools available for backing up SQL Server databases without having to write your own backup scripts, and the error occurs. You need to check if there are some issues about your VDI or SQLVDI.DLL. Meanwhile,
you also need to troubleshooting Memory Issue or the third tool issue. For more information about troubleshooting the error 995 when backing up database via the third party tool. You can review the following blog.
https://support.software.dell.com/kb/SOL14674
In addition, the error may include additional text from the operating system indicating that the disk is full. When performing a backup or restore operation with third-party backup software an additional message may occur indicating that the backup failed.
Perform the following tasks as appropriate:
1. Review the underlying system error messages and SQL Server error messages preceding this one to identify the cause of the failure.
2. Ensure that the backup and restore medium has sufficient space.
3. Correct any errors raised by third-party backup and restore software.
There is also detail about backing up database via T-SQL statement /GUI, you can review the following article.
http://technet.microsoft.com/en-us/library/ms187510.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support
Maybe you are looking for
-
Unable to view Dynamic Prompts in Crystal Reports through JSP
Hi, We are using Crystal Reports, SQL Server and Java in our application. We are using JSP to access Crystal Reports from another machine, get them as "ReportClientDocument" objects and then display them using "CrystalReportInteractiveViewer" object.
-
i have a bb torch 9810, the problem is i cant use trackpad in bbm.. icant scroll up and down,, it occurs only in bbm but still ican use track pad in texting, calling etc.. and also sometimes the physical keyboard is not working..i already updated os
-
Hi all, I'm writing an application which need to use a vector to store data from a file when the program starts. Then, after the user input new data and press "Save" button, the new data will be append to the vector. The following code has error. May
-
i am trying to use the form wizard to create a form that will insert data into one table and change/append data in another. is this possible using the form wizard?if so what options should i use? Edited by: KySarge1981 on Aug 19, 2010 1:14 PM
-
Can't upgrade my MBP to iCloud Drive, even after installing OS X 10.10 Yosemite
WHY can't I upgrade to iCloud Drive on my MBP? I installed OS X 10.10 Yosemite last night but iCloud claims it needs the upgrade when I turned on my MBP today. Any ideas?