BPEL processes not available on BPEL console when deployed from JDeveloper

Installation: SOA Suite 10.1.3.4 (Upgraded through patch) (Standalone OC4J)
When I deploy the BPEL processes through JDeveloper, they do not show up in the BPEL console. JDeveloper does not display any error message but in fact displays successful deploy. I am able to manually deploy processes from the BPEL console itself or by dropping in the BPEL suitcase in the deploy directory.
I noticed this issue when I tried installing AIA foundation pack 2.4. The installation showed the message below -
Failed to read wsdl at "http://AMVAIDYA-US:8888/orabpel/default/AIAErrorTaskAdministrationProcess/AIAErrorTaskAdministrationProcess?wsdl", because "Failed to read WSDL from http://AMVAIDYA-US:8888/orabpel/default/AIAErrorTaskAdministrationProcess/AIAErrorTaskAdministrationProcess?wsdl:WSDL not found".
Make sure wsdl is valid. You may need to start the OraBPEL server, or make sure the related bpel process is deployed correctly.
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
I noticed that issue is independent of AIA since I cannot deploy any BPEL process through JDeveloper (or even through using the ant deploy in JDev)
Please help!
Thanks
Amol

I did try the verbose=true option but there are no errors there. The ant deploy task shows up as successful just like it shows from the right click -> Deploy to domain on the BPEL project. I created a sample async BPEL for this - it has just one assign activity with some dummy values for output. It builds fine. If I deploy the jar file created from this manually in the console it works. But it doesnt work from JDev or Ant. Is there anything I missed during the upgrade patch from 10.1.3.1 to 10.1.3.4? I did execute all the post and pre install tasks (including the orabpel, oraesb schema updates etc)
FYI, I can register an ESB from JDeveloper and it shows up in the ESB console.

Similar Messages

Error message in BPEL console when purging instances

Hi
I get an error message in the BPEL console when I Purge All Instances. The problem arised when i patched SOA suite to version 10.1.3.3. (On 10.1.3.1 i beleive this worked.)
======================================
Exception
Operation failed because:
Cannot delete instances.
The process domain was unable to purge the instances from the datastore. The exception reported is: [POL-5130] table or view SYSTEM.WI_FAULT not found
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: DELETE FROM wi_fault WHERE domain_ref = ?
======================================
I also get a similar error message when i use the search activity function in the BPEL console, and when I use the java-api:s to search among activities.
Does anyone know anything about this error?
Thankyou
//Kalle

I got the same error, but long after I upgraded to 10.1.3.3.
As this was on Windows with Oracle Lite, I did like below to fix the issue. Unfortunately I seem to have more issues with the BPEL database so I'm going to try to find a way to reinitialize it from scratch.
C:\product\10.1.3.1\OracleAS_1\Mobile\Sdk\BIN>msql system/manager@jdbc:[email protected]:1531:orabpel
SQL> @C:\product\10.1.3.1\OracleAS_1\bpel\system\database\scripts\upgrade_10131_10133_olite.sql
[POL-5130] table or view SYSTEM.WI_FAULT not found
Table created
Index created
Index created
Object created
Object created
[POL-5130] table or view SYSTEM.WFPRODUCTIVITY_VIEW not found
[POL-5130] table or view SYSTEM.WFTASKPRIORITY_VIEW not found
[POL-5130] table or view SYSTEM.WFUNATTENDEDTASKS_VIEW not found
[POL-5130] table or view SYSTEM.WFTASKCYCLETIME_VIEW not found
View created
View created
View created
View created
Commit complete

Is there a way not to have to chose an available server in the console when deploying an ejb?

Is there a way not to have to chose an available server in the console when deploying
an ejb? Everytime we deploy our beans we have to logon to the console select the
ejb and then chose a server under the tab targets? Can this be automated?

You could try to select the target in the config.xml file, but this is
not recommended by BEA.
Nils
Fred Bloggs wrote:
>
Is there a way not to have to chose an available server in the console when deploying
an ejb? Everytime we deploy our beans we have to logon to the console select the
ejb and then chose a server under the tab targets? Can this be automated?--
============================
[email protected]

How to upload a file in BPEL Console Using JSP in JDeveloper, pleae........

I am very new to this JDeveloper & BPEl Process , please could some one help in ersolving my problem that is , how to upload a file in BPEL Console Using JSP in JDeveloper.

Hi,
ADF Faces provides you with the file upload component
http://download-uk.oracle.com/docs/html/B25947_01/web_complex006.htm#CEGCEDHF
http://download-uk.oracle.com/docs/html/B25947_01/appendixa007.htm#CHDEDCFA
This gives you a handle to the file content. However, uploading files through a service is different and I suggest to consult teh BPEL forum for this BPEL
Frank

I can't seem to use the 'Check seats' link on Delta when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine.

I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!

That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

Why is 4.0b11pre not available in win64 and when will the regular betas get win64 version

Why is 4.0b11pre not available in win64 and when will the regular betas get win64 version

Mozilla will not be releasing a 64 bit Windows version of Firefox 4. They are creating 64 bit builds for testing purposes, but there will not be an official 64 bit Windows version until some time after Firefox 4 is released.

How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MG

This is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

Navigation not working in Weblogic Server but working from JDeveloper.

Hi
I created a simple application with some page navigations (some declarative and some dynamic using Managed Bean).
The navigation works fine when I run from JDeveloper. (Local System)
So I deployed the application to the WebLogic server (Local system with a domain configured with ADF.)
The pages are getting rendered correctly, bu on button clicks, the navigation is not happening from any of the pages.
Could I have missed something or is there a way to track what the problem might be?
JDev : 11.1.1.3
Web Logic Server : 11gR1 (1.3) which comes with JDeveloper
Thanks for any help.
Sameer

Hi John
I am not using task flows. I just have some jspx pages defined in the unbounded task flow adfc-config.xml connected with navigation.
I run from JDEveloper by right clicking on the jspx files.
The URL when run from jdeveloper is as follows.
http://127.0.0.1:7101/SessionsPOC-ViewController-context-root/faces/MainPage
From Weblogic server I am using the link given in the Testing tab of the weblogic administration console.
The URL is as follows.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root (default)
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/MainPage.jspx
Actually, the URL given in the weblogic testing tab is not runnable. I am changing the link as follows to be able to run it.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/faces/MainPage.jspx
I have defined the MainPage.jspx in the web.xml 's Welcome page. But it is not taking it I guess.
Also, I am able to run the other page by giving the following url. But the navigation buttons are not working in that page also.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/faces/SecondPage.jspx
Thanks
Sameer

Change PowerPivot data source when deploying from Dev - Staging - Production

We have PowerPivot workbooks we store in SharePoint 2013 Libraries.
We have a powershell script which automates the deployment of sites and pages. Is there a way using PowerShell (or any scripting language really) to look into the workbook and change the PowerPivot data source when deployment from one environment to
another? (Dev -> Stage -> Prod) We need to update the workbooks to point to our SSAS cubes Dev -> Stage -> Prod respectively.
Thank you for any expert advice you may offer,
Sincerely,
-Craig

Basically, it's an excel file (XLSX) file and you can use excel OM for this.
A simple program (in C# or any language of your choice) can be written to do the following and achieve what you need.
using XLS = Microsoft.Office.Interop.Excel;
string info = null;
XLS.Application application = null;
try
application = new XLS.Application();
var book = application.Workbooks.Open(filepath);
foreach (XLS.WorkbookConnection wc in book.Connections)
  switch (wc.Type)
   case XLS.XlConnectionType.xlConnectionTypeOLEDB:
    info = wc.Name + " " + wc.OLEDBConnection.Connection.ToString() + "\r\n";
    break;
book.Close();
finally
if (application != null)
  application.Quit();
Hopefully, this was helpful.

Problem with Out of Band Discovery resulting with Out of Band features not available in SCCM console for computers with provisioned AMT device

Hi,
We configured the Out of Band component, but are using Intel SCS RCS to provision AMT devices remotely. The remote configuration process with Intel SCS works fine; we are able to connect to the AMT web UI and we can use a free KVM tool to manage the computer
remotely.
The AMT devices are configured with AD integration, so an object is created for each of them in a specific OU. Also, an AD group is added to the AMT devices so remote PT Administration permission is granted to it. This group includes the ConfigMgr Site
Server account, the account of the server running the Out of Band Service Point and my own user account.
This configuration seems OK since when connecting to the AMT web UI, I use Windows Integrated authentication with my user account and can manage the device successfully.
So the only step remaining is running the OOB discovery to enable Out of Band features for the computers in the SCCM console. We want to use the ConfigMgr OOB console. I right-click a computer or a collection and launch the AMT discovery. I check the OOB
server log, I don't see errors; the OOB service point connects to the AMT device and discover a status of 4, which is Externally provisioned, as expected. The problem is the AMT Status, AMT Version and Provisioned AMT fields for the computer in the ConfigMgr
console doesn't get updated, even after doing display refresh.
Here's the amtopmgr.log (I changed computer name and IP address information to protect client privacy) :
General Worker Thread Pool: Work thread 364 started SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
Discover COMPUTERA using IP address 192.168.12.7 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wakes up to process instruction files SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
DoPingDiscoveryForAMTDevice succeeded. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
session params : https://COMPUTERA.contoso.com:16993 , 11001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
DoWSManDiscovery succeeded with user name: admin. AMTStatus = 1. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
session params : https://COMPUTERA.contoso.com:16993 , 484001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
DoKerberosWSManDiscovery succeeded. AMTStatus = 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Discovery to IP address 192.168.12.7 16 15:16:32 364 (0x016C)
CSMSAMTDiscoveryTask::Execute, discovery to STI17259CPCO succeed. AMT status is 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CSMSAMTDiscoveryTask::Execute - DDR written to E:\SMS\MP\OUTBOXES\ddr.box SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Fill Machine Property' SID=1 MUF=0 PCNT=5, P1='COMPUTERA' P2='' P3='COMPUTERA.contoso.com' P4='' P5='' SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\6heghx71.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='COMPUTERA.contoso.com' 16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\rmit91js.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
General Worker Thread Pool: Succeed to run the task COMPUTERA.contoso.com 16 15:16:32 364 (0x016C)
General Worker Thread Pool: Work thread 364 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
General Worker Thread Pool: Work thread 364 exiting. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
The Management Point is up and running.
Any suggestion or advice is welcomed!
Thank you
Patrick

I found something interesting on this problem, it seems the OOB discovery process is working fine, but for an unknown reason, the site server is not receiving the information from the OOB Service Point to update the AMT Status of the client in the SCCM
database.
The log tells me that a DDR file is created to be sent to the site server. When looking into the SMS\MP\Outboxes\ddr.box folder, I see about 50 DDR files, the oldest one is dated when I started testing OOB discovery.
So the server is unable to send the files to the site server.
Also, since I started this thread, I noticed another issue that could be related to this problem. The same server is also holding the State Migration Point role, it is working fine, but when doing USMT operations, the status of the computer association is
not updated in the console (In Progress, Completed, missing USMT store path, etc.). When looking into the SMS folder on the server, I see a big backlog of SVF files containing information related to the SMP.
I looked into the log files, but didn't find the errors yet to explain this.
The computer account of the server is a member of the SMS_SiteSystemToSiteServerConnection_Stat_XXX group on the site server.
Note that status messages are being sent successfully, I see them in the Monitoring node of the console under Component State, and there is no backlog in the SMS\MP\Outboxes\statemsg.box folder.
Tnx for your help
Patrick

Valid size not available for this creation when using Greeting Card feature

Using PSE9 with a Mac. When attempting to create a greeting card, after selecting the photo, the Greeting Card, I receive a pop up error message as follows:
"Valid Size Not Available For This Creation". (All other Create functions such as Photo Book, Photo Calendar, and Photo Collage appear to be working). I have been in contact with Adobe Support and have been instructed to do a number of things from creating a new preferences file to uninstalling and re-installing the PSE software, with no result. Has anyone else run into this problem, and if so have found a fix? Thanks.

I've been tearing my hair out over this one also. I've been on hold for over 10 hrs with Adobe Support waited over almost 2 weeks and still no resolution. I'm trying to create the Save the Date cards for my wedding and I can't wait for Adobe. Removing the preferences file and uninstalling/reinstalling does not fix the problem.
That said I did figure out a workaround for this. It's easy but it does require Windows. For me this was no big deal as I do own a Windows box.
Get the free trial version of PE9 for Windows and install it. If you don't have a Windows computer get to a friend that has one
Upload some of your photos to the PE9 Windows Organizer (it's identical to the mac version)
Select Create and then Greeting card. Photoshop will launch the guided edit feature for greeting cards.
Select the Layout feature and once you find out that you like save it as Photoshop project. Repeat this step for as many layouts as necessary.
Copy your Photoshop project files (and any folders) to your mac.
Open the project files as you would with any other Photoshop file.
You can now select the Create feature. You will be able add your pictures and resize them, you will be able to add/remove text, you'll be able to change the backgound/borders, add graphics...pretty much anything...EXCEPT automatically modify the layout. If you click on Layout, PE9 returns nothing. You can however go into full edit mode and if you have decent Photoshop skills you can make any changes to the layout manually.
If I had to put money on this I'd say that there is a problem with the PE9 Mac installation package. For some reason it is not deploying the layout data/files or it is not putting them in the right place. For this reason the program can't find the layouts when the user selects the greeting card guided edit.
Good luck.

Processes not available in BPM Workspace

Hi,
We are getting folowing exception in workspace :
The Process '/xyz#Default-1.0' is not available.
The Process '/xyz#Default-1.0' is not available. Caused by: Process '/xyz#Default-1.0' not available. Caused by: Cannot reach engine 'xyzbpmengine' at URL: ''. Caused by: While trying to lookup 'engines.xyzbpmengine' didn't find subcontext 'engines'. Resolved '' No processes were found
Can anyone help us with the possible reason and resolution for the same.
Need an early reply.
Thanks and Regards,

Hi,
Engine is running fine. Looking at the error it seems like engine is not reachable however the engine & its configuration is rechecked & seems to be fine.
What environment are you deploying to?
Cluster environment with Admin & Managed server on single host
What kind of setup do you have?
Cluster environment with Admin & Managed server on single host
1 Admin server 2 Managed servers for engine & 2 Workspace servers
What version of BPM?
10gR3
Did this work before?
This deployment worked on DEv environment with 1 Admin server & no managed servers.
What has changed?
Managed servers added.

Delete button not available for goods receipt when PO has GR-Based IV set

Hi ll,
the delete button for confirmations is greyed out when the PO has the GR-Based IV set, the return delivery button however is available.
There are several goods receipt on the PO some of which have linked invoices but the goods receipt I want to cancel is not linked to an invoice.
I've checked the backend config and it's the same for movement types 102 and 122. Also I can manually post a 102 in the backend.
For PO's without GR-Based IV both the delete and return delivery buttons are available.
Does anyone have any ideas? We are on SRM 4.0.
Cheers
Chris

Hi,
thanks for the response but I don't think this situation is related to backend settings as I can perform a 102 and a 122 against the same PO l;ine directly in R/3.
This appears to be an SRM "feature".
To claifry the situation
PO flagged as GR-Based IV
Purchase Order line has several goods receipts and several invoice receipts matched.
Tryning to cancel a confirmation in SRM for a goods receipt without a matched invoice receipt.
"Delete" button is not available but "Return Delivery" button is available.
In R/3 backend I can post a 102 (delete) or a 122 (return) without any issues.
Config settings are the same for 102 and 122 in the R/3 backend.
Any one any ideas?
Cheers
Chris

Folders not available on removeable media when assigned a different drive letter

I have LR 5.2 and I move files off onto a removable drive as a back-up and it allows me to share the pictures with them when they sometimes lose them. Windows 7 routinely assigns the drive to the letter M:, N:, and sometime P: and apparently I cannot see the folders unless the drive is assigned the same letter as it was when I imported the pictures into the catalog. The folders don’t even show up in the library, but if I do an import all of the folders appear as valid destinations within LR. How can I fix this? The first picture is a screen shot of the library; notice that the year 2013 is missing. The second screen shot is what appears when I go to import; note that 2013 appears. The folders simply do not appear in LR except when I attempt import.
When I look at N: in my “working catalog” it shows it as having catalog “AUMC” but the folders in it belong to the part of my working catalog that I have moved to a different external drive since they’re old picture I don’t use much. They all have question marks, but they are resolved with I attach the external drive with those folders on it.

I do not have access to Windows 7 right now, just windows 8. I am certain that Windows 7 has the same functionality, but my directions to get there may be off a bit as it may have changed.
1) Connect your external drive to your computer, and check what letter Windows gave it.
2) Go To Start->Run and enter 'diskmgmt.msc' (without the quotes)
3) A new window will come up. Maximise it, so you can see it all.
4) Torwards the bottom, you will a white box with the drive letter of your external disk in it.
5) Right click on this white box and select 'Change Drive Letter and Paths' (This may be slightly different in Windows 7).
6) If the 'Change' option is available then click on that, otherwise select 'add'
7) I suggest here you select a letter near the end of the alphabet to minimise the chances of another drive using it.
8) Windows should now try to use this letter each time it mounts the drive.
If windows continues to change the drive letter, then make sure that you 'eject' the drive properly each time because if you do not, windows may think that the drive letter is still in use.
Alternatively, in step 6 above, select 'add' and in there, you can give windows a path on your C drive to mount the disk to (make sure that the directory you select is totally empty). Then the whenever you connect your external hard disk to your computer, the contents will be available there. If you go this route though, make sure that you only wite to this directory when your external hard disk is connected.

Datas are not available to the query when upload a Infopackage

Hello People,
I Would like to know what can be the reason ..why the datas are not available when we execute an upload from FlatFile to the Cube (this one is the last target one).
Considering tere aren´t any poroblem in may target (Cube)
The system shows us the upload was ok, but the status about the "available datas to the query" was not activated.
Thanks,
Rosana.

Hi ,
Please go to T code SE16--> Table RSDDAGGR
Here AggrUID(STARTUID) give not equal to blank, you will get list of all the cubes which has aggregates.
If your cybe is in this list , you need to rollup the data to mae this available in reporting.You can rollupp the data by going into Manage of the cube.
-Vikram

BPEL processes not available on BPEL console when deployed from JDeveloper

Similar Messages

Maybe you are looking for