Navigation not working in Weblogic Server but working from JDeveloper.

Hi
I created a simple application with some page navigations (some declarative and some dynamic using Managed Bean).
The navigation works fine when I run from JDeveloper. (Local System)
So I deployed the application to the WebLogic server (Local system with a domain configured with ADF.)
The pages are getting rendered correctly, bu on button clicks, the navigation is not happening from any of the pages.
Could I have missed something or is there a way to track what the problem might be?
JDev : 11.1.1.3
Web Logic Server : 11gR1 (1.3) which comes with JDeveloper
Thanks for any help.
Sameer

Hi John
I am not using task flows. I just have some jspx pages defined in the unbounded task flow adfc-config.xml connected with navigation.
I run from JDEveloper by right clicking on the jspx files.
The URL when run from jdeveloper is as follows.
http://127.0.0.1:7101/SessionsPOC-ViewController-context-root/faces/MainPage
From Weblogic server I am using the link given in the Testing tab of the weblogic administration console.
The URL is as follows.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root (default)
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/MainPage.jspx
Actually, the URL given in the weblogic testing tab is not runnable. I am changing the link as follows to be able to run it.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/faces/MainPage.jspx
I have defined the MainPage.jspx in the web.xml 's Welcome page. But it is not taking it I guess.
Also, I am able to run the other page by giving the following url. But the navigation buttons are not working in that page also.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/faces/SecondPage.jspx
Thanks
Sameer

Similar Messages

  • Upgrading Weblogic server to move from jdeveloper 11.1.1.1.0 to 11.1.1.4.0

    Hello, I would need clear direction to what I should do to upgrade my target weblogic server when I move my development environment from jdeveloper 11.1.1.1.0 to 11.1.1.4.0
    Initial ADF project was developed with jdeveloper 11.1.1.1.0 and deployed on a WLS 10.3.0
    Now we are upgrating the application and we decided to move the project to jdeveloper 11.1.1.1.4
    I need help on what I should upgrade on the target WLS server.
    How do we move from WLS 10.3.0 to WLS 10.3.4?
    Is it a reinstall or a upgrade? How do we upgrade?
    And what about just upgrating the ADF run time? Is it the way to go?
    At following link we see
    http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html there is a Application development runtime is it the runtime that we install on the server or not?
    I am confused if the ADF run time is tied with the WLS version or not, can someone give me a clear description of what is the ADF Runtime and how we upgrade it on the servers? Any Oracle documentation describing this process that I can provide to my server administrators?
    At the end what is the best practice to upgrade the WLS servers when you would lilke to move like me from an older version of jdeveloper to a newer version. is there an Oracle document describing the steps to be done?
    Thanks

    I'll echo Timo's question - why upgrade to 11.1.1.4 and not to the latest and greatest 11.1.1.6 (released yesterday)?
    Upgrading to an older version basically means that you are setting yourself for another upgrade later on - so why not enjoy all the bug fixes and new features of the newer versions?
    In terms of the upgrade process - if you look in the documentation tab of JDeveloper you'll see the book "Upgrade Guide for Oracle SOA Suite, WebCenter, and ADF" which gives the steps you can follow.
    For 11.1.1.6 the book is here:
    http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10127/toc.htm
    In the same documentation tab you'll find the certification matrix that explains which ADF version works with which WLS version:
    http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html

  • JSP pages not working on app server but works locally

    Hello,
    My application uses java, struts and jsps. When I try to access JSP page like http://appServer:7778/app/login.jsp, it says page not found exception. But when I access http://appServer:7778/app/login.do, it displays login.jsp page (success url for login action is login.jsp). How come I am not able to access jsp pages directly? Am I missing any settings?
    And when I run the application using embedded OC4J of Jdeveloper, I could access jsp pages directly.
    Thanks.

    The method getTextContent() is DOM Level 3, and was introduced with Java1.5
    Tomcat 5.5 runs on Java1.5, but by default uses the JDT compiler for JSPs, which is only Java1.4 compliant - might possibly be that.
    See the [url http://tomcat.apache.org/tomcat-5.5-doc/RELEASE-NOTES.txt] release notes and
    [url http://tomcat.apache.org/tomcat-5.5-doc/jasper-howto.html]how to fix (see the section on configuration)
    >
    The Java compiler from Eclipse JDT in included as the default compiler. It is an advanced Java compiler which will load all dependencies from the Tomcat class loader, which will help tremendously when compiling on large installations with tens of JARs. On fast servers, this will allow sub-second recompilation cycles for even large JSP pages. This new compiler will be updated to support the Java 5 syntax as soon as possible.
    Apache Ant, which was used in previous Tomcat releases, can be used instead instead of the new compiler by simply removing the common/lib/jasper-compiler-jdt.jar file, and placing the ant.jar file from the latest Ant distribution in the common/lib folder. If you do this, you also need to use the "javac" argument to catalina.sh.

  • RDP stopped working on cloud server, but works fine on local server.

    My situation is like this: 
    Before we had moved our sql server onto the cloud, I had been always using RDP to get to the server (it has domain controller and sql server). 
    We moved sql server on to cloud today and every time after I connect to the cloud server vm desktop, the rdp stopped working in few secs. I tried RDP to local server and it was still fine. 
    Other computers seem have no issue with rdp to cloud server as well.
    So it has to be something wrong with my computer setting.
    I checked local group policy and it seems alright. 
    Can you please help?
    Thanks.

    Hi,
    You can refer to this blog to troubleshoot this issue
    http://blogs.msdn.com/b/rds/archive/2011/01/10/how-to-resolve-the-issue-remote-desktop-disconnected-or-unable-to-connect-to-remote-desktop-terminal-server.aspx
    I suggest you check the event viewer and see if there're some useful information recorded about this issue.
    Yolanda Zhu
    TechNet Community Support

  • Same command works on the server but not on the workstation

    Scenario
    Exchange 2010 sp3
    Name                           Value
    CLRVersion                     2.0.50727.4984
    BuildVersion                   6.1.7600.16385
    PSVersion                      2.0
    WSManStackVersion              2.0
    PSCompatibleVersions           {1.0, 2.0}
    SerializationVersion           1.1.0.1
    PSRemotingProtocolVersion      2.1
    Worstation:
    Name                           Value
    PSVersion                      4.0
    WSManStackVersion              3.0
    SerializationVersion           1.1.0.1
    CLRVersion                     4.0.30319.18063
    BuildVersion                   6.3.9600.16406
    PSCompatibleVersions           {1.0, 2.0, 3.0, 4.0}
    PSRemotingProtocolVersion      2.2
    I input a command from my workstation using ISE
    get-exchangeserver | Where-Object {$_.IshubtransportServer -eq $True} | Get-MessageTrackingLog -Start (get-date).AddHours(-2) -Sender '[email protected]'
    Error:
    The input object cannot be bound to any parameters for the command either because the command does not take pipeline input or the input and its properties do not match any of the 
    parameters that take pipeline input.
    The Exact same command from the Server works.
    In my profile I have the following:
    set-Location c:\
    $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'http://MyExchangeServer/powershell'
    import-pssession $Session
    Import-Module ActiveDirectory
    $host.PrivateData.ErrorForegroundColor = 'green'
    Clear-Host
    From My Workstation:
    PS C:\> Get-PSSession
     Id Name            ComputerName    State         ConfigurationName     Availability
      1 Session1        MyExchangeServer  Opened        Microsoft.Exchange       Available
    Why  does the command work on the server but not on the workstation?
    Alexis

    Hi Tiri2014,
    There are some differences between Remote PowerShell and Exchange Management Shell. You cannot use the pipeline when you run some cmdlets by using Remote PowerShell.
    Here’s a link to similar case for your reference:
    Error message when you try to pipe the result of a cmdlet into another cmdlet by using Remote Powershell in Office 365 dedicated: “The input object cannot be bound to any parameters
    for the command”
    http://support.microsoft.com/kb/2701827/en-us
    Hope it helps
    Best regards

  • Installed Snow Leopard OK, but when uploading the Mac os x Update Combined, it would not save. It said it could not connect to update server, but my internet connection is working?

    Installed Snow Leopard OK, but when uploading the Mac OS X Update Combined, it would not save. It said it could not connect to update server, but my internet connection is working. Any suggestions on fixing?

    Run software up date, write down the update name and version. Go to the Apple site and do a search for the updates one at a time and download them one at a time. Use an ethernet connection, sometimes software update "crushes large updates. I have experienced this before.  Hope it helps.  ATB

  • WLS :: Will Vista web client work with Weblogic Server 8.1.6 over SSL?

    Hello,
    I have installed 51-2 bit SSL cert on weblogic 7 and found that the secure site doesn't work on Vista web client.
    Weblogic gives error in handshaking and says algorithm is not supported.
    Vista web client uses some algorithms which were not supported by weblogic 7.
    So would like to know if would Vista web client work with Weblogic Server 8.1.6 over SSL?
    Any information in this regard would be helpful.
    Thanks in Advance.

    can you use the following debug flags in the weblogic server as java_options and paste the complete ssl handshake exception here.
    -Dweblogic.StdoutDebugEnabled=true
    -Dssl.debug=true
    thanks,
    sandeep

  • HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

    I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

    You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

  • I just installed CC Lr 5.5 and it will not open on my laptop but works fine on my desktop.

    I just installed CC Lr 5.5 and it will not open on my laptop, but works fine on my desktop.

    Try this:
    https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

  • [svn:fx-trunk] 13257: Fix for @inheritDoc not working on a setter, but works on a getter

    Revision: 13257
    Revision: 13257
    Author:   [email protected]
    Date:     2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
    Log Message:
    Fix for @inheritDoc not working on a setter, but works on a getter
    QE notes: None.
    Doc notes: None
    Bugs: SDK-24727
    Reviewed By: Paul
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24727
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

    steabert wrote:
    Hi,
    I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
    The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
    options snd-hda-intel model=dell-s14
    I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed.

  • (266758030) Q SYNCH-12 Does Workshop work with WebLogic Server 6.1?

    (266758030) Q<SYNCH-12> Does Workshop work with WebLogic Server 6.1? (asked by Noel
    Fuentes)
    A<SYNCH-12> (by Adam Fitzgerald): No, Web Services in WebLogic Server 6.1 are different
    from those available in WebLogic Server 7.0. WebLogic Workshop is a WLS 7.0 tool.

    Rick,
    You may want to look at the Alteon and F5 configuration we have on edocs.
    Take a look at the following URLs for a possible solution
    http://edocs.bea.com/wls/docs61/cluster/alteon.html#591902
    http://edocs.bea.com/wls/docs61/cluster/bigip.html#591902
    Chuck Nelson
    DRE
    BEA Technical Support

  • Google drive does not work with specific group but works with all users group!!

    Hi,
    Why Google drive does not work with specific group but works with all users group?
    My rule :  Internal > external > all users = works fine
    But
                   Internal > external > A group = not working !!

    Hi,
    if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
    http://technet.microsoft.com/en-us/library/bb794762.aspx
    regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

  • HP ProBook 5220m Fan not working with battery power but work fine with adapter plugged in

    Hi,
    Any one have this issue?
    HP ProBook 5220m (Bios Version F50) Fan not working with battery power but work fine with adapter plugged in.
    This issue was found in my replacement motherboard. the original mother do not have this issue.
    The origianl mother to be replace is due to can't power on after a power failure recovery. I believe was due to power surge killed the motherboard's power controller circuitry.
    Appreciate any one can provide clue for resolving the problem.
    I have tried to install speedfan to try my luck, but it can't any fan in the application to configure. (Bios Version F50) 

    @wheng 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Firefox has stopped working in Windows 7 but works in Windows safe mode

    I am sending this from a different computer on which Firefox works fine. My problem is on a Windows 7 PC -- in the past few days Firefox has stopped working in normal mode but works ok in Windows safe mode. I keep getting a Windows error message that it has stopped working and I will be notified if there is a solution. Of course, I am never notified. I have tried resetting Firefox when in Windows safe mode, as well as uninstalling and reinstalling Firefox, after having deleted all the program folders and appdate. I've exhausted every possible fix I could find in the Mozilla support forums but I still can's solve the problem. Can you help please?

    *3
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Why the preloader doesn't work in IE 8 but works in FireFox?

    Why the preloader doesn't work in IE 8 but works in FireFox?
    Please see the attached files.  Thanks in advance.

    Why doesn't the preloader work in IE8?
    What's "virtual sandbox"?

Maybe you are looking for