BPEL registry integration cache capability?ESB or OSB support WS-Addressing

Hi ,
I have few questions related to Oracle SOA Suite.
Please suugest me
1) How to handle BPEL dehydration in high volume operations?
2) Memory overload of ESB in high volume operations?
3) BPEL registry integration - cache capability?
4) How Oracle ESB or OSB support WS-Addressing?
Suggestions or docs reference will be highly appreciated.
Regards,
Sachin

Hi,
There's a lot of performance info in the SOA Suite Best Practices Guide. More specifically see chapter 2.17 and 10 of http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf.
For correlation between OSB and BPEL using WS-Addressing see http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/bpelpmtransport/transport.html.
Regards, Ronald

Similar Messages

  • What is ESB and OSB? why OSB when ESB avail? when to use which of these?

    Hi,
    What is ESB and OSB? why OSB when ESB avail? when to use which of these? Which is recommendabale?

    ESB (Enterprise Serice Bus) is backbone of SOA. OSB (Oracle Service Bus) is an ESB product. Before the acquisition of BEA, Oracle was using OESB (Oracle Enterprise Service Bus) as a service bus but after that Oracle renamed ALSB (Aqualogic Service Bus) to OSB. Below SOD should help you out in understanding -
    http://www.oracle.com/technology/products/integration/service-bus/docs/Oracle-Service-Bus-SOD.pdf
    Regards,
    Anuj

  • SOA suit 11g uses both ESB and OSB(ALSB)

    Hi, I am newbie to SOA suit 11g. Can somebody please explain the use of ESB and OSB(ALSB) both in SOA 11g.In SOA 11g ESB is being used only for mediation.Even OSB(ALSB) has same capability.Then why both needs to be used?Can't we use one of these?
    ~Pradeep

    hello Pradeep,
    there is quite some literature on this hot topic - actually it's one of the most frequently asked question from people who are using OSB and Soa Suite.
    if you google "OSB vs Mediator" you will find some useful links:
    http://www.scribd.com/doc/23622536/Oracle-SOA-Suite-11g-Mediator-vs-Oracle-Service-Bus-OSB
    SOA SUITE 11g - Mediator & OSB
    http://oracle-fusion-blogs.com/oracle-fusion-osb-mediator/
    and so on....

  • Oracle ESB and OSB confusion

    Hi All,
    I am using SOA suite 11g. I have confusion with Oracle Enterprise Service Bus and Oracle Service Bus
    1> Is ESB and OSB same ? If not, then from where do i download Oracle ESB ? and what would it do different from OSB (*I already downloaded OSB and was able to deploy and run one of SOA application. Also, I have SOA server instance running on my weblogic server as well.* If I have OSB, is it necessary to download Oracle ESB as well ?
    2> I have seen couple of job requirements that just mentions--- ESB experience required Do they mean Oracle Enterprise Service Bus experience ?
    3> SOA/Bpel application developed using Jdeveloper 11.1.1.2 can be deployed to any third party service bus (including IBM and Mule) ? OR it will only run in Oracle service bus. ? This question is just like for example --- developing standard JSR 168 portlet that you can deploy on any third party portal server.
    thanks,
    pp

    If you are using 11g SOA Suite there is no, Oracle Enterprise Service Bus, it has now been renamed as Mediator. Mediator is now part of the composite.
    To answer your questions.
    1. No they are not the same but they can perform similar functions. Oracle ESB is 10g and is part of the 10g 10.1.3.1 install which is found on OTN, not sure you can get the standalone version without raising a SR you may find it on eDelivery.oracle.com. If you have OSB installed there is no requirement to have Oracle ESB as OSB will perform everything Oracle ESB does, (apart from domain values maps, but this can be done in BPEL)
    2. ESB is a generic term and does not mean it is Oracle, as there are many ESB out there. I would say OSB if it is an Oracle job, but you may need to know both. If you know mediator you will know Oracle ESB so you don't need to download.
    3. You don't deploy SOA/BPEL into a service bus. They are deployed to and application server where SOA Suite is deployed. At this time SOA Suite is only certified with Oracle Web Logic but other app servers will be coming. Having said that your SOA/BPEL application can consume services on other application servers as long as the WSDL and endpoint are accessible from the your SOA Suite machine. They will be treated as web services. The JSR168 standard means that if your portal solution is JSR168 compliant then you can consume JSR168 portlets, these portlets can be deployed on any 3rd party app server.
    cheers
    James
    PS Oracle owns Mule as well.

  • How to identify the bpel instance called by specific esb instance

    Hello expets,
    Greetings,
    Is there any way to find out the instance of BPEL process invoked by an esb process.
    In short i have a esb process invoking a bpel. I want to find out the Instance of Bpel process invoked by esb
    Are there any tables which store this information
    Thanks in advance
    Best Regards,
    naveen

    Hi Justin,
    Thanks for the response.
    indeed i have looked cube instance table.
    My scenario is esb picks message from AQ and calls a BPEL process.
    When i looked up the root_id and parent_id in cube instance table those are same as that of the BPEL process instance id. That is because this is the first process in the transaction at BPEL layer.
    Is there a way to find the instance of the process at one layer before
    Tehanks
    Naveen
    Edited by: user12044731 on Nov 10, 2010 10:26 PM

  • Oracle BPEL connection to Caché/MUMPS

    Hello,
    Im looking for any docs on Oracle BPEL connection to Caché/MUMPS, wonder if anyone can assist me.
    Thank you.

    John,
    that's really interesting. Could you explain what was "corrupted" in ns_emails.xml? Do you know why and how it was affecting test connection in JDeveloper for BPEL server connection? And how did you discover this (through which logs, what exception lead you to this issue)?
    Thanks
    Peter

  • Does ESB support WS-ADDRESSING???

    hi all,
    does ESB support WS-Addressing ?also is there any document on how to implement WS-addressing in BPEL ?
    any suggestions??
    regards,
    karthik

    Hi Karthik,
    Oracle BPEL PM implements WS-Addressing to represent dynamic endpoints and to invoke Web Service on an asynchronous messaging pattern.
    The WS-Addressing standard provides a mechanism called endpoint references that allow you to select one of the available services in the WSDL, or even define new services at runtime. Please refer : http://www.oracle.com/technology/pub/articles/bpel_cookbook/carey.html.
    ESB supports WS-ADDRESSING, please check : http://www.oracle.com/technology/products/integration/esb/files/esb-bpel-esbloanrouter.pdf
    With OSB(formerly ALSB) , here is the implementation : http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/bpelpmtransport/transport.html#wp1106721
    Hope this answers your questions!
    Cheers
    Anirudh Pucha

  • OSB Support for Polymorphic Webservices

    Hi,
    I am in process of evaluating OSB for being used as corporate ESB. As part of evaluation I need to confirm if OSB supports polymorphic webservices.
    As of now I am doubful for this support. If it is supported, I will really appreciate if someone can provide some example or direct me where I can get more details.

    OSB does not support drive/media multiplexing and I'm not aware of any plans for this.
    In a proper environment the systems you're backing up are able to push the drive to the limit so there is no requirement to do this. It's more of a legacy option to support old hardware which is too slow.
    Most people are moving towards VTL environments now where you can just add as many tape drives as you need.
    Thanks
    Rich

  • Does OSB support XQuery import module feature ?

    In OSB version 11.1 and Oracle Weblogic Server Version: 10.3.6.0
    I need to create library of XQuery functions (reusable components), to achieve this, I need to use XQuery import module feature.
    When I tried to use it, I got this error message ‘Module feature not supported (sorry)’ …
    Does OSB support XQuery import module feature ?

    You may like to refer Eric's blogpost -
    http://www.xenta.nl/blog/2011/10/19/oracle-service-bus-the-number-of-parameters-for-registered-xquery-resource-system1_to_fault-does-not-match-that-given-to-it-at-runtime/
    Basically, if you are not using a parameter in XQuery then it will not be registered.
    Regards,
    Anuj

  • Does Oracle ESB support WS-Addressing?

    Hi,
    I was wondering whether Oracle ESB supports WS-Addressing.
    Thanks.

    ESB 10.1.3 does not support WS-Addressing. It is planned for AS11 R1.

  • Will OSB supports using schema definition at runtime ?

    Here is the SOAP response defined in the WSDL.
    <s:element name="XXRatesResponse">
         <s:complexType>
              <s:sequence>
                   <s:element minOccurs="0" maxOccurs="1" name="XXRatesResult">
                        <s:complexType>
                             <s:sequence>
                             <s:element ref="s:schema"/>
                             <s:any/>
                             </s:sequence>
                        </s:complexType>
                   </s:element>
              </s:sequence>
         </s:complexType>
    </s:element>
    This schema definition is working fine in SOAPUI. But when I try to create a Business Service using the WSDL in OSB 10gR3, it returns
    "*The invocation resulted in an error: Not Found.* "
    Our question is
    1. Will OSB supports runtime schema definitions?
    2. Any tweak can be done to support this?
    3. Will this is supported in 11g ?

    The invocation resulted in an error: Not Found. This error comes when Business Service is able to contact the destination server but not able to find the resources defined by the URL.
    Check the endpoint of the busienss service.
    Further, like Anuj mentioned, if you are able to create a Business Service out of the WSDL it means that the WSDL is validated and supported. The fact that you are getting an invocation error means that the Business Service is getting executed but not able to call the destination service.
    Edited by: AbhishekJ on Mar 24, 2011 11:26 AM

  • Cache "dist-test" does not support pass-through optimization

    I have noticed this message in the log of my Extend proxy JVM. It is logged at INFO level.
    The cache dist-test does not support pass-through optimization for objects in internal format. If possible, consider using a different cache topology.
    The Extend proxy JVM is running as a storage disabled node of the cluster.
    Any ideas what is causing it?
    dist-test is configured like this:
      <caching-scheme-mapping>
        <cache-mapping>
          <cache-name>dist-*</cache-name>
          <scheme-name>near-entitled-scheme</scheme-name>
        </cache-mapping>
      </caching-scheme-mapping>
      <caching-schemes>
        <near-scheme>
          <scheme-name>near-entitled-scheme</scheme-name>
          <front-scheme>
            <local-scheme>
              <eviction-policy>HYBRID</eviction-policy>
              <high-units>1000</high-units>
            </local-scheme>
          </front-scheme>
          <back-scheme>
            <distributed-scheme>
              <scheme-ref>dist-default</scheme-ref>
            </distributed-scheme>
          </back-scheme>
        </near-scheme>
        <distributed-scheme>
          <scheme-name>dist-default</scheme-name>
          <serializer>
            <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
          </serializer>
          <lease-granularity>member</lease-granularity>
          <backing-map-scheme>
            <local-scheme>
              <listener>
                <class-scheme>
                  <class-name>{backing-map-listener-class-name com.oracle.coherence.common.backingmaplisteners.NullBackingMapListener}</class-name>
                  <init-params>
                    <init-param>
                      <param-type>com.tangosol.net.BackingMapManagerContext</param-type>
                      <param-value>{manager-context}</param-value>
                    </init-param>
                  </init-params>
                </class-scheme>
              </listener>
            </local-scheme>
          </backing-map-scheme>
          <autostart>true</autostart>
        </distributed-scheme>
      </caching-schemes>I presume it is something to do with the near-scheme because I do not see the message if I map dist-* caches directly to the dist-default scheme
    Cheers,
    JK.

    Hi Jonathan,
    You are getting the warning because a near cache caches Objects. Since the the proxy service is using POF, it must deserialize the POF serialized value in order to put it in the near cache. You don't see the message when you cache directly to the dist-default scheme because that scheme is configured to use POF, which allows the proxy service to pass the POF serialized value directly through to the distributed cache service.
    Thanks,
    Tom

  • Oracle EBS - BPEL/BPM integration

    Hi
    Edited by: user10467930 on Sep 19, 2009 12:57 PM

    Oracle BPM has no adapter, it not really Oracle strategic product in the short term.
    Oracle OSB 10.3 has a BPEL transport
    If you are using the Oracle ESB from iAS use fastpath
    http://www.oracle.com/technology/products/integration/esb/files/esb-presentation-bpel-fastpath.pdf
    BPEL back to OSB can be implmented via SOAP calls.
    cheers
    James

  • WSDL cache on ESB causes deploy error

    In our processes we are using many database adapters to perform tasks. To centralize the interface files (.xsd, .wsdl) we are using an esb routing rule to create a service that routes one operation to each function/procedure in each pl/sql package that we are using.
    This works very well since and have helped us reducing the file duplication in the project but we are having one problem.
    When a database operation is added or changed in an esb routing service, the BPEL process that calls the database service can not be deployed without restarting the SOA home. The deployment fails when the BPEL process is compiled on the application server. The local BPEL compilation works fine.
    We are quite sure that this is related to some kind of WSDL cache in the ESB. We have tried the following ways to clear the cache but nothing has succeeded:
    - Before redeploying the ESB service we remove using the ESB control. We also make sure that we remove the remaining ESB service files from the server.
    - Clear WSDL cache in the BPEL control.
    - We have checked that all files related to the ESB service on the application server really are updated.
    Only when we restart the server we can deploy the BPEL process again.
    The following error message is received when trying to deploy the BPEL process:
    ORABPEL-01021
    BPEL validation failed.
    BPEL source validation failed, the errors are:
    [Error ORABPEL-10902]: compilation failed
    [Description]: in "bpel.xml", XML parsing failed because "undefined part element.
    In WSDL at "http://[servername]/esb/slide/ESB_Projects/[artifact name]/DatabasePackages_emx_reminders.wsdl", message part element "{[namespace]}InputParameters" is not defined in any of the schemas.
    Please make sure the spelling of the element QName is correct and the WSDL import is complete.
    [Potential fix]: n/a.
    Please note that I have removed some server information and replaced it with the text in italics.

    Hi Daniel,
    Thank you for posting. It really helped me out.
    We had already spent more than a man week on this issue.
    Since the BPEL process was running on a box seperate from the ESB cache we could restart the BPEL box forever without ever figuring it out...
    Regards,
    Aagaard
    Edited by: Aagaard on Nov 4, 2008 8:54 AM
    PS. We were not able to find and clear the presumed ESB cache. We ended up doing a fresh install of the BPEL PM without the SOA suite (which we did not use) and hence also without the ESB.
    This is a very crude approach which worked out in our situation, but there must be a more elegant way around this issue.

  • BPEL Process Manager caches requests

    Hi,
    i recently downloaded Oracle BPEL Process Manager 10.1.2 bundled with JDeveloper.
    I created a BPEL process which invokes an external web service. The result of the web service invocation is transformed with an stylesheet using the transform activity and resend to another web service. After i deployed the process, everything works fine.
    But now i face a cache problem: everytime i change the stylesheet in the transform activity and redeploy the whole bpel process to the running BPEL PM Server, the change in the stylesheet is not reflected in the 2nd version of the BPEL process. The requests send after the transform activity are the same as in the 1st deployment of the process. Restarting the BPEL PM Server helps recognizing the change in the stylesheet and a appropriate request is send now.
    I can see the new stylesheet after redeployment in the .jar file located in the deploy folder. I also see it in the temp directory of my domain.
    It seems that the BPEL PM Server is caching somehow the stylesheet used in the 1st deployment and does not recognize changes in the stylesheet afterwards. Can i disable this caching? Or do i have to restart the server each time i change the stylesheet for the transform activity?
    Thanks in advance
    Pete

    Maybe there is some caching property which can be disabled?
    I didn´t find any hints on the forum and currently i always create a new stylesheet (with a new name), copy the whole content from the old stylesheet and assign the new stylesheet to the transform activity before redeployment, which is a very poor solution but still faster than relaunching the server...

Maybe you are looking for