Bpeladmin cannot withdraw tasks, although being the owner

Hi all,
We are facing an issue when trying to withdraw a human task from inside of a BPEL process.
According to the documentation, the task owner (which we understand by default should be bpeladmin ) is allowed to withdraw and reassign tasks. When calling withdrawTask on the TaskService, we are using the authorization context which was returned when the task was created ([as described in this blog post|http://orasoa.blogspot.com/2007/09/cancel-workflow-human-task.html]).
However, the call fails and we get the following reply:
<pre>
ORABPEL-30503
Invalid Token Error in Verification Service.
Invalid Token Error in Verification Service. Received invalid token MhcO0vmQ24CQClrLFVwlgs8a+oRACQlBvcc4SKc83hf7hT4xiKsRFlFJPg3Qf5RQVL1koQYczeHlUE3fl4yvA9GAsezTFonLuQtb84khaEJpaOUFsBflwg1c5n7J/JE37eJW6HeqoT0IkRqrHDt3hIYXgL5Saqzz1UZTMji/JPWLyWt4oSASNV7EooDrvYiZWZfTYYJ/sMQCkl8lezXP/vdPMaz/LDuYwxpp14204gGW4l02E/xBfmAIKHrOwTtzZzzW4mrs8IQ= in canUserPerformTaskAction
Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
</pre>
Does anyone have an idea what could be wrong?
Cheers, Emil

I forgot to mention that we are using Oracle BPM version 10.1.3.4.
/emil

Similar Messages

0x800713CF: The owner node cannot run this resource (SQL)

I have SQL 2012 SP2 service on 2 FC nodes of 2012 R2 servers. Everything were working fine about a year, but now my first Node got mixed up with updates and it is offline now. Problem is, that second Node cannot start SQL services By its own.
I checked/tried:
- I checked, that other services related to SQL are online.
- I chenged Node´s ownership to SQL service
- Cluster name has full Access rights to OU where all Computer record of this service are in place
The error I get:
0x800713cf:The cluster resource cannot be brought online. The owner node cannot run this resource.

Thank you both. I´m not sure, how to to check the workload. In FC graphical GUI, both nodes are memebers in owner group, same Place where the owner order can be changed or owner can be disabled. I gone through entire FC management snap-in
and didn´t find any other places or settings to go through. The article kb313882 Umesh refers, is for Server 2008, and I have 2012 R2. Command
cluster res <var> name of resource</var> /listowners is not supported (there is no such command). I got first node up and running, and then SQL services were ON again, but if I shutdown first Node, SQL services will go down
and won´t come up. Disk storage are online and SP level matches.
Please could you guide me step By step, how to check ownership in 2012 R2?

TS3297 I cannot purchase music currently as I am being asked to answer security questions due to it being " the first time have bought from this PC". This is not the case, I have not changed my PC. I have changed my passowrd and security questions but no

I cannot buy music currently as I am being asked to answer security questions due to it being supposedly "the first time I have bought form this PC". This is not the case. I have now changed my password and security questions, but it is asking me the same when I try to buy again.

First off, the name of your computer is only the way it is becuase the Apple user is the first one they created after repairing the Mac. Go into Sharing System Preferences and change the name to whatever you like.
Can you explain how you did this:
This didn't seem right so I went in to it and changed the computer so that it would recognise me as the Owner/Administrator.
You can delete the Apple user in Users & Groups System Prefs. Select that user and delete it. It will ask if you want to save the user data or delete it. If you archive it, you can always delete it later and it will be available if you need to recover that account for some reason--I doubt this will be necessary. After deleting the account, and when you feel you are still working normally, you could delete that archived user folder.
I have also never seen anything ask for that. It does sound like an Epson thing, but without having access to it, I couldn't tell you for sure.
Here's what I would try. Create a new User and give them admin rights. Log in as that user and see what happens with the installer. If it still complains, it is an Epson issue. My guess is it is looking for user id 501, the first user created. If it works, then something is indeed odd about your account. If so, use that new admin account to disable Admin privileges for your account, then re-enable it. This is done in the Users & Groups system prefs.

Cannot complete your request because the database is being refreshed

I created provisioned one user in Shared Services and then assigned to a group. After this I went to workspace in advance mode in order to manage security filters, the user does not appear and when I try to "create" an existing user, an error appears: Cannot complete your request because the database is being refreshed
I'm not running any refresh in the database and my EAS does not show anything. What could be happening? It is Hyperion Planning 11.1.1.3
Regards,

Than you John,
I executed the cmd and this appeared after entering the password, I understand that the application has been unlocked, doesn't it?
[INFO] RegistryLogger - REGISTRY LOG INITIALIZED
[INFO] RegistryLogger - REGISTRY LOG INITIALIZED
D:\Hyperion\common\config\9.5.0.0\product\planning\9.5.0.0\planning_1.xml
displayName = Planning
componentTypes =
priority = 50
version = 9.5.0.0
build = 1
location = D:\Hyperion\products\Planning
taskSequence =
task =
*******D:\Hyperion\common\config\9.5.0.0\registry.properties
using Java property for Hyperion Home D:\Hyperion
Setting Arbor path to: D:\Hyperion\common\EssbaseRTC\9.5.0.0
Setting HBR Mode to: 2
=2013-11-06 11:07:30,926 WARN main com.hyperion.hbr.security.HbrSecurityAPI - Er
ror retrieving user by identity
d{ISO8601} WARN main com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving
user by identity
Embedded HBR initialized.
d{ISO8601} INFO main com.hyperion.audit.client.runtime.AuditRuntime - Audit Clie
nt has been created for the server http://stlwlahyapprd01.na.ds.monsanto.com:280
80/interop/Audit
Reaquired task list lease: Wed Nov 06 11:07:31 CST 2013: 1383757651285
The application has been successfully unlocked
d{ISO8601} INFO pinging com.hyperion.audit.client.cache.AuditConfigFilter - Clie
nt Enable Status false
d{ISO8601} INFO Thread-22 com.hyperion.audit.client.cache.AuditConfigFilter - Cl
ient Enable Status false
d{ISO8601} INFO filterConfig com.hyperion.audit.client.cache.AuditConfigFilter -
Client Enable Status false

Populating the Owner(Employee) on the Activity Task

Hi,
I have a requirement to code the After Modify event of Task Extended BO.
If the Category on the task has some specific value, then the Owner needs to change.
Below is the code I have put in the After Modify event:
var elActivityParty : elementsof Activity.Party;
if(this.GroupCode.content = "Z001")
elActivityParty.PartyName = "Sumeet Narang";
this.EmployeeResponsibleParty.Create(elActivityParty);
I am getting the error "Please enter a party with role Employee Responsible". However I am not able to change the PartyID as it is a read only field. What else needs to be done in this case?

Check in Business configuration for that particular role and see if manual changes are forbidden. Screen shot below for Activities-Task config. Hope it helps and please keep the forum posted.
Regards
Jai

When I get an ICS from Outlook that is a multi-day event it populates my iCal as a single day and since I am not the owner I cannot edit the ICS.

When I get an ICS from Outlook Express (Office is PC based) that is a multi-day event, it populates my iCal as a single day and since I am not the owner I cannot edit the ICS. I have to delete it and send a "decline notice" to the sender and re-enter it so I can put in multiple day events. Help!

If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

Help - "Acrobat is being used by another application and cannot open PDF files until the other application is closed."

Hello,
I searched this site and google for this error terminology and come up dry. I support a user who has been for years using Acrobat 5 (yes, I know...) to read files in a client DB program, as well as other PDF files on their PC. In the last week or so, they have started gatting this error "Acrobat is being used by another application and cannot open PDF files until the other application is closed." any time they attempt to open a PDF file attached to an email (via Outlook).
It is my understanding that they cannot upgrade to a newer version of Acrobat because of limitations of their client software, but had not previously had any issues viewing PDF notes from the DB, and PDF attachments in their email.
I have tried uninstalling and re-installing, as well as tried using Adobe Reader 7 & 9 in conjunction with Acrobat to try to get around this issue, but have not been successful.
Any ideas?
Thanks,
Jesse

I don't have an answer to your technical problem. The product I assume is Acrobat that you are talking about (based on the post title), Adobe is the company name. This is a good place to ask questions on Acrobat if folks can figure out what you are talking about. They will ask for the product version number (like AA9.3.3), operating system, and other applications if appropriate. Also, just what you are doing that generates the message.
As for Adobe, you are not likely to get an answer from them here in the user forum. You will be lucky if you can get an answer if you can contact them and not be on hold for more than an hour (sorry, this is why a lot of folks end up in the forum).
So, to help others try to answer your question, what are the products and versions involved? What OS? What are you doing when the message comes up.

A friend gave me an older Nano 3rd generation. Can anyone tell me how to delete what is on there and how to get rid of his name. It does not connect to my itunes. I cannot even find the source or the place to restore it as suggested in the owners manual.

I have a 3rd generation ipod that a friend gave me. I cannot find anything on how to get rid of his name and music on it. This is what the owners manual says:
"Select ipod nano in the soiurce list and click the summary tab" I cannot find the source or the summary tab on itunes. Can any one help me? I would like to delete everything on it and start over but I am afraid I cannot add anything back on it. I know this is detailed and a lot, but I really need help.

Restore
Note: Because Restore erases all of the songs and files on iPod, make sure toback up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.
How to restore your iPod:For Windows:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
For Mac:
1. Make sure you've reinstalled the latest version of iTunes.
2. Open iTunes, and then connect your iPod to your computer.
3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.
4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.
Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.
6. A message will appear prompting you to enter an administrator's name and password.
7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.
Source:
iPod nano (3rd generation) Troubleshooting Assistant
Message was edited by: michael08081

I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.

I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.
Both these situations have cropped up on my MacBook Pro since the last update.
Thanks for your help.
Cheers
Bob

The 'Winmail.dat' problem has been extensively covered in these forums, I would search for that (a Google search works well) and unfortunately I have not seen the pdf print problem before, but assuming the software is current and functions normally (other than the pdf print problem) I have no suggestion other than the obvious (but time consuming) re-installation of Office.
I wish I had more

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

*Ralph Johns* writes:
"Your options are:
Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
Do you mean a trial account from .Mac? (DotMac)
"Get an AIM Screen name and set it to Display what you want as you set it up.
The Screen name can be whatever yu want but you can also set it to display something else as well."
I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
Thanks very much for taking the time to reply, though.

I brought second hand iphone4 but i cannot open it because the owner forgot her apple id and password, how can i reformat this without reformating my phone outside?

I brought second hand iphone4 but i cannot open it because the owner forgot her apple id and password, how can i reformat this without reformating my phone outside? what can i do to open this? its till on the set up mode

There is nothing you can do about but ask the seller for your money back. Without the previous owners applid password, you cannot activate and use that device - there is no way around that. iOS 7's Activation Lock needs to be disabled by the previous owner in order for you to use it - if they cannot (or willnot) produce the password to disable it, you have no options.
They can disable it remotely for you - see http://support.apple.com/kb/HT5661 but not if they do not remember their own password.

The task cannot be processed further until the current edit session is act

Dear Sir/Madam
I have installed standalone Oracle WebLogic Server 11g(10.3.6) with Sherman Update3,for I used JDeveloper 11g Release 2 (11.1.2.3.0).
I Sometimes got below message for several times and it can be repeatable when I have wanted to deploy my applications.
"[11:38:24 AM] [Deployer:149140]The task cannot be processed further until the current edit session is activated. When this occurs, task processing will continue. The user can exit the deployer tool without affecting the task."
Furthermore, I run weblogic console and I see to appear the two buttons "Activate Changes & Undo All Changes" in spite of the weblogic is in development mode, yet the state of my application is "deploy initialize". I Click "Activate Changes" button but it's not happened.
Finally, for dealing with this problem, I have to shutdown & start up the weblogic .Next, I can deploy my application.
Best Regards,
Saeed.

Hi,
That message is not an error. It means that you need to connect to the WebLogic Server Console and activate the changes.
Solution
Access the WebLogic Server Console and click on Activate Changes.
Confirm if your application shows in the WebLogic Server Console under "Deployments".
Regards,
Kal

Why SYS cannot be the owner of the recovery catalog

my question is why? i know SYS cannot be the owner of the recovery catalog as per oracle documentations and books.
why SYS cannot be the owner of the recovery catalog?

Hi
SYS is like root/system admin for the database. It has to distribute jobs according to specific purpose. SYS could have been the owner of RMAN catalog but it does not make sense to keep it with SYS objects as it is easier to find all related catalog tables in a separate schema rather than combing with any other sys/system schema. The choice is logical.
Regards

HT201441 I FOUND AND IPHONE AND I CANNOT OPEN IT SO I CAN CALL THE OWNER, HOW DO I CONTACT THE OWNER SO I COULD RETURN IT

I FOUND AN IPHONE AND HOW CAN I CONACT THE OWNER SO THAT I COULD RETURN THE PHONE TO HIM OR HER

You cannot open the phone, because it is locked and that's why you won't find out his number or email address.

Bpeladmin cannot withdraw tasks, although being the owner

Similar Messages

Maybe you are looking for