0x800713CF: The owner node cannot run this resource (SQL)

I have SQL 2012 SP2 service on 2 FC nodes of 2012 R2 servers. Everything were working fine about a year, but now my first Node got mixed up with updates and it is offline now. Problem is, that second Node cannot start SQL services By its own.
I checked/tried:
- I checked, that other services related to SQL are online.
- I chenged Node´s ownership to SQL service
- Cluster name has full Access rights to OU where all Computer record of this service are in place
The error I get:
0x800713cf:The cluster resource cannot be brought online. The owner node cannot run this resource.

Thank you both. I´m not sure, how to to check the workload. In FC graphical GUI, both nodes are memebers in owner group, same Place where the owner order can be changed or owner can be disabled. I gone through entire FC management snap-in
and didn´t find any other places or settings to go through. The article kb313882 Umesh refers, is for Server 2008, and I have 2012 R2. Command
cluster res <var> name of resource</var> /listowners is not supported (there is no such command). I got first node up and running, and then SQL services were ON again, but if I shutdown first Node, SQL services will go down
and won´t come up. Disk storage are online and SP level matches.
Please could you guide me step By step, how to check ownership in 2012 R2?

Similar Messages

Why the following command cannot run successfully?

Why the following command cannot run successfully?
SQL> exec DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE;
BEGIN DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to
'EVOLVE_SQL_PLAN_BASELINE'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

Here is an example how you can invoke it:
SET SERVEROUTPUT ON
SET LONG 10000
DECLARE
    report clob;
BEGIN
    report := DBMS_SPM.EVOLVE_SQL_PLAN_BASELINE(
                  sql_handle => 'SYS_SQL_593bc74fca8e6738');
    DBMS_OUTPUT.PUT_LINE(report);
END;
/With kind regards
Krystian Zieja
http://www.projectenvision.com

When using Java Wizard with Firefox 3.6.23 on a Mac OS X 10.6.8 it keep getting an error message: "The Java Wizard cannot run. Please configure your browser to allow Java applets to access the filesystem." Have NO idea how to fix this problem.

When trying to upload files I received the following error: "The Java Wizard cannot run. Please configure your browser to allow Java applets to access the filesystem."

If the problem is with a site that is hosted using MOVEit DMZ by Ipswitch, please notify the site owner of the issue and ask them to apply the patch that is available on the support site to resolve the issue.
This is a better resolution than downgrading your version of Java that was updated due to security issues.

The Sims 3 error message Device 0 cannot run this title.

Unable to start game
Device 0 cannot run this title.
Your video card does not appear to support at least Shader Model 2. Please upgrade your card.
HP Pavilion a1110n desktop PC
Windows xp home edition service pack 3
I have the following: Intel(R)82845G/GL/GE/PE/GV Graphics Controller
Processor is Intel(R) Celeron(R) CPU 3.06GHz
Under System Devices
PCI bus
Under VSO devices
pcouffin device for 32 bits systems
Monitor is
Compaq 7550 Color Monitor
Power supply is
Bestec
Input voltage is from 100 to 127 volts 6 Amps
Output voltage is 250 Volts MAX.
HP PN:*5187-1098*
It is the original factory installed Graphics Controller for my desktop computer again is:
Intel(R)82845G/GL/GE/PE/GV Graphics Controller
Can I buy a new graphics controller for my specific model computer that will support The Sims 3?

Need to know what model the laptop is.
The error is saying that your video card/adapter doesn't support at least shader model 2.0 and the game needs it in order to run.
if you have windows xp i would download the latest directx 9.0c from microsoft.com and also get the latest video drivers for your video card.
if those 2 don't help (i'm sure it won't) then that's all you can do for that laptop.
You can also go to canirunit.com and select the game you're planning on running and let it do a system check and it will tell you if your system can really run that game or not.
There are many great and inexpensive laptops you can get nowadays for no more $500 that can run even newer games on.

When I get an ICS from Outlook that is a multi-day event it populates my iCal as a single day and since I am not the owner I cannot edit the ICS.

When I get an ICS from Outlook Express (Office is PC based) that is a multi-day event, it populates my iCal as a single day and since I am not the owner I cannot edit the ICS. I have to delete it and send a "decline notice" to the sender and re-enter it so I can put in multiple day events. Help!

If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

HT1941 I have inadvertently changed a file permission setting. When opening Aperture I get the following; Aperture cannot access this library. To use this library make sure it's file permissions are set correctly. I am an old dude new to Mac OS. What up?

I have inadvertently changed a file permission setting. When opening Aperture I get the following; "Aperture cannot access this library. To use this library make sure it's file permissions are set correctly". I am an old dude new to Mac OS. Looked in settings but have no idea how to allow file sharing to myself. I have been using Aperture actively for 6 weeks. I'm the only one using this Mac. What up?

Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

Where can I find the plugin to open camera raw files for Nikon D810 for Photoshop CS5.1? I've looked around the site but cannot get this to work.. Thank you.

See for yourself which version of ACR is needed for that camera’s RAW files
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
then check your version (Photoshop > About Plug-In > Camera Raw).
Your version of Photoshop does not support that version of ACR.
You could use the free DNG Converter.

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension ".wmv" at the end of the name. The required extension is ".webarchive" --if I save it this way, i just get a web address rather than the wmv

Attempting to download a wmv file. I keep getting the message: "You cannot save this document with extension “.wmv” at the end of the name. The required extension is “.webarchive” --if I save it this way, i just get a web address rather than the wmv

Find the URL for the WMV, paste it into Safari's address bar, and press the Option and Enter keys.
(66873)

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
Checking in the log revealed the following error:
Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?

A: my MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

Error -2147024714 : Automation Error the operating system cannot run %1'

Post Author: greg.thompson
CA Forum: General
After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

AADSTS65005: The request has failed because the client has not specified this resource in its requiredResourceAccess list

Hello,
I'm trying to acess an OData feed using Power Query.
The service is guarded by an AAD OWIN middleware and is registered in AAD.
If I try to consume the service, a popup appears which allows me to login, but after login I get the following error:
AADSTS65005: The client application has requested access to resource <resource>. This request has failed because the client has not specified this resource in its requiredResourceAccess list.
Trace ID: acdb2c32-4249-46e4-8afe-38db0aad991b
Correlation ID: aed596d5-b663-42ae-8621-64a8e04dc8fa
Does anyone know what might be the problem?
Thanks!

Hi,
By default, a registered app is configured to request "Read the user's profile", which once consented to by the user, allows the app to get a user token (id token if using OpenID Connect) and read the signed in user's profile (including their mail
address or addresses) when calling the Azure AD Graph API.
Please try setting the resource in your request to Azure AD,
Please refer to the similar thread:
http://stackoverflow.com/questions/26093954/oauth-integration-with-o365-fails-with-error-aadsts65005
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

This version of the imaging eninge cannot read this image

I am trying to read an image that I created in April 2009. I used it in August 2009. An now I am receiving the error - This version of the imaging engine cannot read this image.
I have recently upgraded the image engine to v7.0.1.7 and threw out old copies of boot disk, etc. Is my problem that it was written with an older version (no earlier than 6.5)? Or is it something else?

ABissman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

PhotoShop Elements from the App Store cannot run actions??

I am so upset that I spent $80 to download PhotoShop Elements 9 from the App Store and then found out that it cannot run actions and presets!!!! For some reason, the version of PSE that you get from the app store is not capable of this, which is the main reason I NEED and USE PhotoShop! Please tell me I am wrong and if so, how to fix it!!! I have them installed in the files correctly but they don't show up in PS. Thank you for any help you can provide, thanks!

I just loaded my actions using the PSE 10 from the App Store.
Close PSE.
Access the System library location from Finder, Click menue, "Go" then select "Go to Folder...". Type in "~/Library" and click Go.
The systems Library will open up and then you take this path:
Application Support > Adobe > Adobe Photoshop Elements 10 Editor > Presets > Actions (The Actions folder is where you move your actions file to)
Then go to the Photo Creations Folder > Locales > en_US and delete the MediaDatabase.db3 file (move it to the trash)
The next time you launch PSE your Actions DB will be rebuilt with the new actions installed.

Cannot run this script in matlab

Hello..
Can anyone help me in running this script in matlab. It is a code in matlab for finding a R transformation.
"letzt_size reduced_2.jpg" is the inlut image we gives. Any image can be used. I tried to put this code in a Mathscript functionnode. Butit is not working. Otherwise this code works in Matlab.
D = imread('letzt_size reduced_2.jpg');
imagesc(D)
imshow(D)
[R,xp] = radon(D,[0 45]);
figure; plot(xp,R(:,1)); title('R_{0^o} (x\prime)')
theta = 0:360;
[R,xp] = radon(D,theta);
imagesc(theta,xp,R);
title('R_{\theta} (X\prime)');
xlabel('\theta (degrees)');
ylabel('X\prime');
set(gca,'XTick',0:20:180);
colormap(hot);
colorbar
save radon R xp -ascii -double -tabs
Nghtcwrlr
********************Kudos are alwayzz Welcome !! ******************

Hi Nghtcrwir,
the reason is LabVIEW doesnt have "imread" function in Mathscript function node.
You can use LabVIEW help to check which matlab programs are supported by Mathscript function node.
All the Best!
Ritesh

MEGA 180 Wireless Card Cannot Run - No Resources

Well, I FINALLY got the MEGA 180 to recognize the built-in wireless card, but the card will not run becuase the system is telling me that there are no available resources for the card... huh?
Does anyone know what this means and how I can get my built-in wireless working? I currently have an external USB wireless adapter working, but I'd really like to remove it and try the built-in one.
Thanks,
Matt

Nice little update to report.
When I had my MEGA 180 open to lap the heatsink and reapply the Arctic Silver, I decided to check the Mini-PCI card to make sure everything was ok. Sure enough, it was not fully seated in the socket. This would explain why my wireless card would never work.
I pushed it in firmly, and when the system started back up, voila! I had built-in wireless.
Horrible quality control out of MSI to let a system go from the factory like this, but I'm glad it was something small.

0x800713CF: The owner node cannot run this resource (SQL)

Similar Messages

Maybe you are looking for