BPM Error: BPE_ADAPTER MESSAGE_NOT_USED

Hi,
we have an issue in our XI production system, where message is not reaching BPM and its giving below error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
We carried out following steps:
1. Did cache refresh using Tcode 'sxi_cache', IP object is giving return code as "99".
2. We deleted the Integration Process object from Integration directory and reimported the object from Integration Reporsitory again.
3. We re-imported the IR object from QA server again in Production, but it still didn't work. (It is working fine in QA environment).
4. We went through following SAP Note 901366 & 910437 (Both have been applied).
Can you please help us resolve this issue at the earliest.
Regards,
Ashish

Hi Orit,
We had this issue because workflow customizing object for use of xml object types was not activated in our system.
This issue was resolved using tcode 'SWF_XI_CUSTOMIZING', and activate 'Activate Use of XML Object Types'.
Hope this helps!!!
Regards,
Ashish

Similar Messages

BPM Error as MESSAGE_NOT_USED

Please help me fix this error.
My scenario is i have a bpm process for splitting three files.I mean here i will get the data in single XML file but we have to map to multiple interfaces and post the data inthese interfaces to SAP R/3. please remember that sender is only one service and receiver is also only one service.but the receiving interfaces are multiple.
here i am having one communication channel for sender service.
one communication channel xi adapter for a proxy into sap.
then using BPM process as sender to the proxy reciever
I am getting error from sxmb_moni in xi box
as error category:BPE_ADAPTER
error id: message_not_used.
it says message not used in any process.
please help me correct this problem..
here i have created 1 sender agreement, 4 receiver determinations, 4 interface determinations, and 3 receiver agreements.
i searched forums for this error solution . and i searched my configuration as per the suggestions. the SXI_CACHE return code is '0' only . i searched for syntax errors in integration process there it is fine . i tested my scenario in test configuration ,there also it is fine .
please help me in this issue.
thanks
RAMANA

Ramana,
Refresh the Cache. If it doesn't helps check whether the outbound interface and the BPM receive step interface must be same.
Reply back ur findings!!
Best regards,
raj.

BPE_ADAPTER MESSAGE_NOT_USED Message is not used by any processes

We need some help on BPM flow. We are at it for last 3 days without much progress. We are able to make sync call to same BAPIs and get data without any issue. However, with BPM we have this issue
I am creating the simplest integration scenario as
1.       HTML/HTTP-->BPM (Async)
2.       BPM-->R/3 (Sync)
3.       BPM-->File (Async)
Created all required interfaces and mapping. I have some dummy mapping for first 2 cases. I am able to activate the integration scenario and Integration Process without any error. I am able to import it in integration directory successfully without any error. When I am executing the first async request from HTML client I am invariably end up with an error from sxmb_moni as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is not used by any processes</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The BPM is not getting invoked. Looking at the trace it shows that there is an error after creating BPE proxy for message as
<Trace level="3" type="T">created BPE proxy for message DE5FB5802F33D3F19373005056A12466</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
What I have checked so far:
1.    I have checked that the developer key is assigned to my user id
2.    Used SWF_XI_CUSTOMIZING to make sure that all the process are green
3.    Used sxi_cache to make sure that the BPM process has return code 0 and also reactivated it numerous times. Also checked activation log and no error there
4.    Used SXMP_ADM_BPEAutomatic BPM Customizing to check all the entries are green
5. There are not any message in sxmb_moni_bpe for my interface shows no message
Input call has:
1.    Sender Service: MFG_BPM_BusinessSystem
2.    Sender Interface: MI_Outbound_Async
3.    Quality Of Service: EO
4.    Sender Name space: Name space
5.    Input XML:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:BAPI_SALESORDER_GETLIST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
   <CUSTOMER_NUMBER>0000001000</CUSTOMER_NUMBER>
   <DOCUMENT_DATE/>
   <DOCUMENT_DATE_TO/>
   <MATERIAL/>
   <MATERIAL_EVG>
      <MATERIAL_EXT/>
      <MATERIAL_VERS/>
      <MATERIAL_GUID/>
   </MATERIAL_EVG>
   <PURCHASE_ORDER/>
   <PURCHASE_ORDER_NUMBER/>
   <SALES_ORGANIZATION>1000</SALES_ORGANIZATION>
   <TRANSACTION_GROUP/>
   <SALES_ORDERS>
      <item>
      </item>
   </SALES_ORDERS>
</ns0:BAPI_SALESORDER_GETLIST>
Any clue, help pointer will be of great help. Just beats me, what is wrong!!
Version:
SAP R/3 ECC 6.0
XI 7.0

Hi,
Please check these threads where they have the same issue:
Message is not used by any processes
Error: Message is not used by any processes
Error: BPE_ADAPTER Message not used in any process
Message is not used by any processes
---Satish

Error: BPE_ADAPTER Message not used in any process

Please help me fix this error.
My scenario is i have a bpm process for merging three files.
and i configured in this way..
merge the three files into one and send into SAP
i have three communication channels (file adapter) for three files
one communication channel xi adapter for a proxy into sap.
using these files as input to BPM process
then using BPM process as sender to the proxy reciever
I am getting error from sxmb_moni in xi box
as error category:BPE_ADAPTER
error id: message_not_used.
it says message not used in any process.
please help me correct this problem..
thanks
jp

JP,
Are u sure there is nothing wrong in your design part? Also Are u using Fork to receive 3 files parallely, If yes then all the 3 files has been checked for start process? Can u confirm this.
Also in the Inerface determinations did u gave abstract interfaces that BPM is recieving?
Best regards,
raj.

BPM error at send step

hi experts,
In a simple File to File using BPM Scenario, messages are processed up to send step (only 2 steps are there recv and send). The receive side is okay. i can monitor the messages that are being picked up in the monitor. In adapter both sender and receiver adapters are showing green.
How to trouble shoot inside BPM errors; i tried SXMB_MONI -> selected PE from the message -> chose graphical description, where it shows red and an error in the send step.
the SXMB_MONI shows error in outbound message side. and the pipeline stops at Call Adapter.
thanks in advance,
nikhil
Happy 2008

hi Farooq!!
Others are working.
see, this is a simple scenario File BPM File and it uses simple message type and interface too. The interface mapping working fine. The Integration Process uses no correlations, just transferring the file as it is. IP is checked(F7) no errors found. when running, it picking the file and upto call Adapter it is working. in the SXMB_Moni it shows error in the outbound (PE) status. When we check it in the WorkFlow diagram, it shows error in the send step as Adapter Framework Server, still other scenarios are working fine with the BPM.
please leave good suggestions and checks
thanks,
nikhil

BPM error handling

Hi,
I've read many messages on this forum regarding BPM error handling but am still a little confused.
In my scenario the BPM is quite simple. All it does is Call web service (synchrous) then transform and then call another web service synchronous.
Now , If any call to the two web services fails , I would like to be able to restart the two calls... now if they fail again, I would like to be able to restart the two calls again... until they work. But each time the restart would be done manualy in the BPM monitoring transactions.
The way I understand the error handling
if I put my synchronous send steps and transformations in a step and catch the exception they throw , I can send myself an alert and then throw another exception which I dont handle. This way , since that exception is not handled , it will set the process in error and I can restart the process later.
However , how can I set it up so that when I restart the bpm , both calls are done again and the same exception handling happens.
Now , when I restart, it seems only what comes after the block and the exception is executed. If I put the sync send calls in the exception handling branch, that will allow me to run the send steps once after an exception...
Thanks.

Even if I don't throw the exception and its a System error on the synchonous call, the BPM is in error but the next call will
go through...
I don't know what the point of EOIO was in that case ?
Even having an Exception branch is enough....you need not compulsorily have anything in it.....so when an exception occurs in your Sync step the control goes to the Exception Branch of the Block....but since there is no step defined in the branch nothing happens.....and the Control then passes to the next branch as in a normal flow.....
Since the Exception branch is defined the BPM will not wait/ stop/ error-out if any thing goes wrong in the Sync Send step.....it will continue....this is the normal behavior....an error entry will however be shown...if you want that your process stops if the Sync Send fails then have a Control Step (Action--> Cancel Process) in the Exception Branch
Regards,
Abhishek.

Queue blocked after BPM error!

Hi,
Is there any configuration steps to do in order to avoid incoming message to be blocked (Scheduled on outbound side) in the queue when there is a bpm error.
Thanks in advance,

Hi,
yes we can do through SXMB_ADMIN, SMQ1..
Outbound Scheduler (Transaction SMQS)
If the Outbound Scheduler is responsible for sending and executing these LUWs, and the logon data in transaction SM59 in the destination is incomplete, then any subsequent LUW calls might be executed under the logon data of a previous user. This occurs if the destination scheduler is already running under another user when the LUW is called and no logon data is maintained in transaction SM59. In this case, the destination scheduler runs under the user that started the scheduler (and this user's language). This means the destination scheduler runs under the wrong logon data, as does the processing of the subsequent LUWs.
Until now, destinations could only be registered in the Outbound Scheduler if the logon data (client, user, password, language) had been defined completely in transaction SM59 (if LUWs always needed to be processed under a specific user and language). Destinations with incomplete logon data could be registered only if the user and language was not important. In addition, some internal destinations (NONE/SPACE) do not allow you to enter a user or language in transaction SM59. For this reason, and for tRFC compatibility, you can only register these destinations in the Outbound Scheduler with the optional Without tRFC flag.
see below links
http://help.sap.com/saphelp_nw04/helpdata/en/1a/d2fc40b2c7f96fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ba/665f3c482a7331e10000000a114084/frameset.htm
The reason of blocking a queue
Queues getting blocked on error
Regards
Chilla..

BPM error on syncronous service call

Hi All,
I am working on a file to SOAP to file scenario using BPM. I am calling a web service syncronously in BPM. I have followed my scenario referring below two links:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Both ways i am getting the same error:
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages Exception CX_WAPI_DEF_PROPERTY_NOT_FOUND occurred (program: SAPMHTTP, include: , line: 0).</SAP:Stack>
Kindly suggest.

Hi,
I dont see any entry for the bpm in SXMB_MONI_BPE transaction, that means the Process is not been triggered.
I have checkd all the message interfces, everything is pointing correctly. following is the trace:
Trace level="1" type="B" name="SA_COMM">
<Trace level="1" type="T">Start Sync/Async Communication</Trace>
<Trace level="1" type="Timestamp">2009-03-31T06:44:36Z CET Starting Processing</Trace>
<Trace level="1" type="T">Pipeline Timeout: 31.03.2009 08:45:36 CET</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">No mapping property with name sap.bc.bmt.wfm.xi.interface.synch.http://xxxx.com/XI/SISBE_SRR:SRR_S01_AI</Trace>
<Trace level="1" type="T">SRR_S01_AI really used in process?</Trace>
</Trace>
Can someone suggest on this
Edited by: PSharma on Mar 31, 2009 9:52 AM
Edited by: PSharma on Mar 31, 2009 9:53 AM

BPM error (Rfc to file scenario)

Dear Experts,
I'm doing a RFC-FILE scenario with BPM. I have followed the blog RFC Scenario using BPM --Starter Kit by Arpit Seth.
The file is getting picked up. But in SXMB_MONI i get the following error:
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
In SXMB_MONI_BPE, there are no workflows for the integration process.
What could be wrong?
Please help.
Thanks,
Merrilly

Hi,
Thsi is the error i'm getting now in the synchronous send step:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_FileRequest_to_RFCRequest_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_FileRequest_to_RFCRequest_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Is it because that the BAPI is not processing anything?
Thanks,
Merrilly

Http- XI- RFC BPM Error

Hello,
   I am trying to configure a bpm for this scenario.
I have a web application which will send a customeised PO xml to XI. This po will contain a single line item info.
XI will add this line items into a single po and that will be transfered to SAP using a RFC BAPI_PO_CREATE
http->XI->RFC
This is at the start asynchronus communication.
To add po line items , I am trying to configure bpm.
i have configured a bpm with
recive step
correlation
trnasformation
send
I have taken help of BPMPatternCollectPayload from
http://sap.com/xi/XI/System/Patterns
but i am facing folowing error,

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have checked , status of business process i.e 2
I am not getting which step is missing.
Pl can anyone suggest.
thanks,
Sharada

Hello,
When I tested mapping program with payload of inbound messagr taken from technical workflow log , it was giving me mapping error. So I just again created a input xml file from mapping program and transfered that as input xml to xi. but now i am facing error as follows,
Unable to deliver event 'RECEIVED' of object 'ZXI_PROXY_PURCHASE_ORDER__0001'(226801E68FCF114583B
Work item 000000009047: Object CL_SWF_XI_MSG_BROKER method CALL_TRANSFORMATION cannot be executed
com/sap/xi/tf/_PurchaseOrderMerge_new_1_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntimeEx
Error handling for work item 000000009047
com/sap/xi/tf/_PurchaseOrderMerge_new_1_com.sap.aii.utilxi.misc.api.BaseRuntimeExceptionRuntimeEx
and my input xml is as given
<?xml version="1.0" encoding="UTF-8"?>
<ns1:Messages xmlns:ns1="http://sap.com/xi/XI/SplitAndMerge">
<ns1:Message1>
    <ns:Purchase_Order_Request_new xmlns:ns="http://rapidigm.com/test">
      <key>2</key>
      <DocDate>2</DocDate>
      <DocType>3</DocType>
      <PurchOrg>4</PurchOrg>
      <PurchGroup>5</PurchGroup>
      <Vendor>6</Vendor>
      <itemno>10</itemno>
      <materialno>8</materialno>
      <qty>9</qty>
      <description />
    </ns:Purchase_Order_Request_new>
</ns1:Message1>
</ns1:Messages>
please suggest on this.
thanks,
Sharada

BPM error : No Work Items Exist

With reference to the BPM related weblog
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1822. [original link is broken] [original link is broken] [original link is broken]
My input file is picked by sender communication channel, but have not reached on the receiver. In SXMB_MONI_BPE, I selected my service and tried to execute, the message is "No Work Items Exist".
Any suggestions on this....

Hi,
Go to SXI_CACHE and check the status of your BPM. The return status of your BPM should be 0 . If not, try to activate your BPM from there.
Also, do a semantics check on your BPM by pressing f7. It will display any semantics error if any.
chk out these threads wher the same issue is being referred
Re: No object type found for this message
BPE_ADAPTER error on async BPM
Thanks
Swarup

Error BPE_ADAPTER" SYSTEM_FAILURE_INTERNAL

Hello,
I have a problem in XI, now any RFC access it is running. We can not access to R/3 by BAPI or to send an idoc.
We have all the BPM with CR 0.
The error is after a generic BPM to collect the idocs. Then we send the data collected to a mapping out of the BPM and we obtain this error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand=""><SAP:Category>XIAdapter</SAP:Category><SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>An internal error has occurred
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
I tried to delete with swwl all the processes and to refresh the cache, but we still have the same issue.
This morning we have restarted XI machine and the interfaces are not running. All are failing we we send an idoc to R/3 or do an RFC access to retrieve data by BAPI.
Do you know what could be the solution to this issue?
Regards,
Xavier.

Hi Viniytha/ All
Chck whether your integration Process is active.. in IR. or reactivate it. Then In configuration delete the existing IP , again import and activate . See if it works. I had faced a similar issue. I reactivated the IP in repository( copied,deleted and made a new one) and this worked.
I have done all above activities . But when I check SXI_CACHE
It says Problem during cache refresh.
Problem when updating object OutboundBinding-4F43C177727735A3BBE61EBB5C9DD85A. :Error occurred while creating profile for receiver agreement 4F43C177727735A3BBE61EBB5C9DD85A; channel A3C5F6D836BC3CB9925A8794E30AA758 not found on the Integration Server
I cannot see my bpm object in Integartion Process Node
I do not why I am getting the above error and not able to see my bpm object in Integartion Process Node
Regards

Access dynamic attributes BPM; error while activating the process in sxi

hi everybody,
I have to access dynamic attributs in a BPM condition. I thought I could achive this when I click the radiobutton "contextobject" in the condition editor.
When using the value-help button on the contextobject a huge list of objects is shown for selection.
Strange to me is that also the radionbutton "interface-variable" is checked. I can not uncheck this radiobutton. But this makes the error while activating:
"Containerelement 'IDOC_'MyContainerelement'{XSDSIMPLE::xsd:string;SHeaderSUBJECT:ht' does not exist".
Has anybody expirience using the dynamic attributes/contextobjekts in BPM?
Thanks, Regards Mario

Hi all,
it seems to be impossible to access the attributes:
Technical Context Object in ccBPM
Regards Mario

BPM error after SP 14

Hi,
I have a strange problem. Since we upgrade to SP14 we have porblems with BPMs including a Message Switch like this example: SQLResponse./p1:MT_SQL_QUERY_response/StmName_response/row/VORGANGS_SCHLUESSEL = 300
on XI side everything works fine (test and activate) but on R3 side of XI (transaction SXI_CACHE) this BPMs result with error: 'VORGANGS_SCHLUESSEL' is not a component of data object 'PAYLOAD' - I have the similiar BPM on SP13 and it works fine...
Any idea or same problem?
THX Matt
--> I solve it on my own --> with SAP Note 890760
Message was edited by: Matthias Boettger

Hi Michal
The transport mechanisim is file import/export. We imported repository objects at namespace level and directory objects at scenario level. Just give some more input on this issue, before transport of all our objects (around 170) we did a sample tranport of only one interface object (both directory and repository objects)that worked perfectly.
Then we imported rest of all our objects and at this point we got cache refresh error in SXI_CACHE (communication error). We set the "No Timeout" option in the RFC destination INTEGRATION_DIRECTORY_HMI and all cache contents got re-freshed. After this we found only some BPM's are in status 0 but most of them in status 99.
I verified the container elements are present in my Dev BPM it is present and it works correctly. Hope this might give some clue on where the issue could be.
Regards
Prahllad

BPM Error:Runtime handle of object type could not be created:CX_MERGE_SPLIT

HI Guys...
I am working on a RFC to HTTP scenario:
It is a standard SAP interface ....so we created only ID objects..obviously the BPM delivered by must be correct.
in sxmb_moni_bpe it is throwing th following error texts:
Runtime handle of object type could not be created
Error executing service for node
Exception CX_MERGE_SPLIT occured
component mapping has returned an error
unmodeled exception when executing service for node
No payload found
object FLOWITEM method EXECUTE cannot be executed
I tested the mapping payload from sxmb_moni in IR and it is working fine.
Receiver is an HTTP so could not able to find exactly whats happening as no thrid party tools can be installed....struck up here.
Any iputs will be of help in this area.
Thanx in adavance.
Kiran

any inputs around this plz??

BPM Error: BPE_ADAPTER MESSAGE_NOT_USED

Similar Messages

Maybe you are looking for