BPM error at send step

hi experts,
In a simple File to File using BPM Scenario, messages are processed up to send step (only 2 steps are there recv and send). The receive side is okay. i can monitor the messages that are being picked up in the monitor. In adapter both sender and receiver adapters are showing green.
How to trouble shoot inside BPM errors; i tried SXMB_MONI -> selected PE from the message -> chose graphical description, where it shows red and an error in the send step.
the SXMB_MONI shows error in outbound message side. and the pipeline stops at Call Adapter.
thanks in advance,
nikhil
Happy 2008

hi Farooq!!
Others are working.
see, this is a simple scenario File BPM File and it uses simple message type and interface too. The interface mapping working fine. The Integration Process uses no correlations, just transferring the file as it is. IP is checked(F7) no errors found. when running, it picking the file and upto call Adapter it is working. in the SXMB_Moni it shows error in the outbound (PE) status. When we check it in the WorkFlow diagram, it shows error in the send step as Adapter Framework Server, still other scenarios are working fine with the BPM.
please leave good suggestions and checks
thanks,
nikhil

Similar Messages

BPM Error: Synchronous Send Step

Hi All,
I am getting the below error in the synchronous send step of my BPM.
Interface urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
I am trying to send a query and get data from a table in this step. I have an abstract synchronous interface attached to this step and I have an inbound synchronous interface at the configuration side as the receiver for the BPM sync. interface.
The errored out interface is the abstract interface used as the response message at the BPM sync step.
Does anyone has encountered this before?
additional error info)(
Work item 000000364714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
Message no. WL821
Diagnosis
The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
System Response
The work item was forced into the error status.
Procedure
Refer to your workflow system administrator.
Procedure for System Administration
Also check the binding between the task container and the method container.
Appreciate your help!
Regards,
Shiny

Hi,
e urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
Are u using 7.1 versin of PI, if so can u check if u r consistently using operation name in interface
Babu

Error in send step in BPM

Hello,
I ehanced an existing BPM where a send step sends data to a J2EE system. I inserted a switch and put the existing send step to one branche and a new send step to the otherweise-branche. The new send step interrupt with an error:
No exception defined for fault message hostname http://xml.apache.org/axis/
But there is an exception branche defined. An idea what's the problem?
I didn't define a message called hostname, so where he got this name from?
thx
chris

No, everything seems fine.
Here is the payload of response :

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error in send step

Hello,
I ehanced an existing BPM where a send step sends data to a J2EE system. I inserted a switch and put the existing send step to one branche and a new send step to the otherweise-branche. The new send step interrupt with an error:
No exception defined for fault message hostname http://xml.apache.org/axis/
But there is an exception branche defined. An idea what's the problem?
I didn't define a message called hostname, so where he got this name from?
thx
chris

No, everything seems fine.
Here is the payload of response :

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

BPM - Optional Multiple Send steps

I have a situation where I'm doing Message Splits in BPM and subsequently Send steps. Due to MessageSplit I may or may not produce Target messages. But Send Steps following the transformation are errored out saying no Instance found ( No message found ).
Transformation step may or may not produce all target messages. How to avoid BPM to fall into error in this situation.

Hi Ram,
Ok do one thing create a container variable. Dont use this container variable in any steps. now pt a condition at the point whr u want to check whehter the container variable in which u r receiveing the msg is not equal to this newly created container variable. If the condition is satisfed, u hv receive the msg i.e. ur container variable is not empty.
Regards,
Akshay
Message was edited by:
Akshay Salunke

File BPM Webservice IDOC .........Error in BPM workflow(Sync send step)

Hi all,
I have the same type scenario that is file initiates the bpm that invokes the Webservice.the file data goes into bpm as the input data of the webservice and webservice gives the response and then the web-service response is mapped to
idoc and finally posted to R/3.
The interface sI created:
1.outbound Async -
>for file
2. Abstract async----
>bpm reciever step.
3.Abstract sync----
>bpm sync send step.
4.inbound sync -
>for the webservice to recieve the reqst and to send the response to Abstract sync
5.Abstract async----
>to send the data out of BPM
6.inbound async----
for idoc
created 3 communication channel.
1.file adapter: sender
2.SOAP adapter: Recv
3.IDOC adapter: Recv
created 3 reciever determination
Business process instance in ID
reciever agreement(2)
interface determaination
But getting a problem in BPM.
I think the scenario is logically correct as I have seen previous
SDN suggestions.
But getting the problem in BPM's sync step.and the SOAP rec channel is also inactive.in BPM workflow I can see the recv step is getting file req data but after that in the sync send step
its stuck up.getting error.
Please sir suggest me.

Remove the interface you created for Idoc that is inbound async one. use the imported Idoc itself as the interface and also as the message type. Everything else looks good though i did not really evaluate ur ID configuration..
VJ

BPM Error in Transformation Step: Interface Mapping not found

Hi,
Can you help me on this? I have a tranformation step in my BPM that combines a request and response message of a previous Send step to create a Source message for the next Send step. However, on my transformation step, I got the mapping error in workflow log: Interface mapping http://gl.euhreka.com/learning/skillsoft/catalogSy.YGLXI_OM_MergeRequestAndHandleResponseAB_To_PollFo (SWCV=DF8549309ECE11DFB58DF3570A341E0F) not found
Do you have any idea about this error? My mapping program is working fine. I also checked if the container elements assigned to the transformation steps are correct.
Can you suggest of other way on how can I achieve on merging 2 messages (request and response) and set it to the Request for another send step?
Thanks,
Jenny

Hello,
I already solved the problem. The namespace and Operation mapping name is too long that's why it cannot be located at runtime.
After the rename, another error appeared.
"Incorrect XML format after mapping: Root-Tag expected instead of Messages"
There are no useful information on the trace:
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://test YGLXI_OM_Merge , Software Component Version DF8549309ECE11DFB58DF3570A341E0F</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type XSLT , Program PollForReport_Merge</Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet PollForReport_Merge.xsl.</Trace>
<Trace level="2" type="T">Returned form XSLT processor.</Trace>
</MappingTrace>
Here is myXSLT program:
<?xml version='1.0' encoding='utf-8' ?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
 <xsl:template match="/">
 <YGLXI_MT_PollForReportRequest>
 <customerID>
 <xsl:value-of select="//customerID"/>
 </customerID>
 <customerPassword>
 <xsl:value-of select="//customerPassword"/>
 </customerPassword>
 <reportIDHandle>
 <xsl:value-of select="//reportHandle"/>
 </reportIDHandle>
 </YGLXI_MT_PollForReportRequest>
 </xsl:template>
Here is my source message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns1:YGLXI_MT_InitiateFullCourseListingRequest xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
 <customerID>ZZZ</customerID>
 <customerPassword>XXX</customerPassword>
 <reportFormat>VVV</reportFormat>
 <mode>VCC</mode>
 <userName>CC</userName>
 </ns1:YGLXI_MT_InitiateFullCourseListingRequest>
 </ns0:Message1>
 <ns0:Message2>
 <ns1:YGLXI_MT_InitiateFullCourseListingResponse xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
 <reportHandle>SADA</reportHandle>
 </ns1:YGLXI_MT_InitiateFullCourseListingResponse>
 </ns0:Message2>
</ns0:Messages>
I tested my program in Operation mapping and it is working. How come it is not in BPM?
Thanks,
Jenny

IDoc outbound errors - mail send step in WF to send info-mail to enduser

Hello specialists
I searched quite a lot in the forums now. I found lot of info but nothing regarding my issue.
I need to send an info-mail to the end user creating purchase orders. But only if the idoc (outbound ORDERS) could not be sent (failing for some reason, i.e. if rfc connection fails). This is what I've done to achieve this:
- in WE40 I linked my WF to process code EDIO
- the WF-BATCH user has an email address assigned to it (in SU01)
- the mail sending step in my WF is configured like this:
recipient type = G (organizational object)
Expression = &_WORKITEM.CREATEDBYUSER.ID& (this contains the enduser id)
subject = Test for &WORKITEM.CREATEDBYUSER.ID&
When testing the mail can not be delivered (error SO23).
When setting recipient type to U (E-Mail address) and giving a valid e-mail address, then it works fine (SCOT, etc. is configured and mailing to external systems works). But setting the e-mail address hard coded style in the mail send step is not an option here!
It seems that the send mail step (SELFITEM.SENDTASKDESCRIPTION) always requires a valid e-mail address. Is it not able to handle SAP user id's ?
Thanks in advance for some guideance on this one.
Renaud
Edited by: Renaud Desarzens on Feb 11, 2010 3:00 PM

Hello and thanks for your help.
I was able to solve it like this:
- don't use mail send step
- instead, add new activity with a new task (SELFITEM.SENDTASKDESCRIPTION)
- in the bindings (workflow -> step) set:
B --> &TYPEID&
&_WORKITEM.CREATEDBYUSER.ID& --> &ADDRESSSTRINGS&
Seems that the mail send step doesn't allow TYPEID to be "B" because each time I tried to tweak the generated bindings that way it messed up the recipient type and expression I set before.
Regards
Renaud

BPM RFC synch send step

Hi
I am using RFC synch send step with in parforeach block in BPM. do I need to activate correlation to correlate synchronous request and synchronous response for RFC synch send step ?
Please let me know if you have any ideas on this.
Thanks
Anand

Hi Michal,
Thanks for the reply.
In SAP help I found the statement made below.
Activating a Correlation
An asynchronous or synchronous send step can activate correlations. This can be useful in the following cases:
· Synchronous send step
A synchronous send step waits for a reply message to be received. On receipt of this reply message,
correlations can be activated to correlate additional messages.**********************************Any idea on highlighted sentence...
Thanks
Anand

BPM error at BLock step name

hello experts,
i am working on BPM scenario,
in that i have few block steps..... one of block step, the step name is displaying the error.
saying that the step name is already exists.
but i have changed, then also it displaying the same error.
can any body help me in this regard??

Delete the block and recreate it. It will automatically assign it a unique name.
Regards,
Prateek

BPM - Send Step to HTTP - How to capture the error?

Hi gurus,
I have a BPM with a Send Step that connects to an http server. I need the following:
- If the HTTP returns code 200, end the BPM
- If the HTTP returns another code, wait 5 minutos and try the send step again.
I've made a LOOP with a flag. Inside the LOOP I have a BLOCK with an exception branch.
In the send step I put in the field "system error" to go to the exception branch and in the exception branch i'm setting my flag to do the loop one more time.
My problem is that the Send Step is not triggering the exception branch! The http returns 405 or 504 and it continues like everything is okey.
Can you help with this?
Thanks in advance !
MD.

Hi Ramakrishna,
Once you create the session, Process the session using
the report RSBDCSUB using submit statement.
It would list out the erroneous records.
Hence, while submitting, just say submit RSBDCSUB in background and export output list to memory.,
Then you can retrieve the list from memory using the FM LIST_FROM_MEMORY into the internal table and finally send the email by the fm you have already mentioned.
Regards,
Ravi

How to handle error in Syncrounous Send step in BPM.

Hi All,
i am inserting the data into target database and getting the response from the target database in to XI(BPM) here i am sending the data as a bunch(packets), i mean i am splitting the recods into packets and inserting these packets into target database through Sync Send step... now my problem is how can i handle if any of the packet(one set of bunch recors) was fail, how can i handle this exception.
Thanks in advances for your suggesions and solutions which came by your huge experiences.
B'rgrds,
Srinivas

Since the requirement is to catch the Exception proceed as:
Include a Block in your BPM --> Include the Send Step -> Right-click on the Block and choose insert Exception Branch> In the Exception Branch inlcude the logic that you want to implement in case of error.
Possible Exception Handling logics:
1) Send email to support personnel notifying him of the error and let the remaining process continue
2) Send email to support personnel notifying him of the error and cancel the process
3) Cancel the process.
Make sure that you create a Exception Handler to be included in the Block and also in the System Error section of the Send Step.
Regards,
Abhishek.

IDOC send step not running with exception in BPM?

Hello,
hope this is a simple question, but we are running with a problem here which is not answered well in SAP help or sdn. Possibly I didn´t find the right blog.
Situation:
We created a BPM with a send step (IDOC receiver) in a block (after a receive step starting the BPM) (That´s simple so far!).
The send step (async IDOC) in the block is connected in its attributes in field "system error" to an exception branch defined in the same block.
In this except.branch the process should send back to sender system a message via RFC and the last step in this exception branch is to interrupt the proces.
But now we tried to do a test. In this test we modified the receiver address of the send step (IDOC reciver) so that the receiver could not be reached, which results in a system error in SXMB_MONI (Service unavailable).
But this doesn´t work. The BPM starts the send step to the unavailable receiver, SXMB_MONI shows a system error step, but then the BPM continues with the next step after the block without starting the exception branch.
Any idea why the exception branch is not called?
Best regards
Dirk

Hello again,
we are one step further now.
We did the same with an RFC instead of the IDOC send step.
Same result:
The service is not reachable. So the step results in an system error.
But as we could see in the monitoring SXMB_MONI the block with the exception and this send step (RFC) is passed before the step gives back this error!
So it looks like connection problems do not trigger an exception?
Any help is welcome!
Best regards
Dirk

Switching Step based on Send Step Acknowledgement in BPM

Hello Everyone,
We have an inteface scenario to read a file, send the message to an R/3 system, check the return code and generate an email if the acknowledgement is not OK. NT file -> SAP XI -(asyn ABAP proxy)-> R/3.
We want to use the standard inbound interface provided by SAP which is an asynchronous proxy interface. We implemented a BPM with a send step and application acknowledgement. Now based on the application acknowledgement we want to send an email to a support group. Is there a way we can check the acknowledgement status and implement a switch step?
Sathi.

Hi Naveen,
Thanks for your response.
OK I will try transport acknowledgement. I find these acknowledgements are not available in a container. So how can I implement a switch to perform 2 different processing paths based on success/failure status of the acknowledgement.

Regarding BPM Errors

Hello,
What kind of errors we can expect from the BPM configuration and execution time.
Thank you

Hi ravi,
you can expect
a) mapping errors in transformation steps
b) system-errors in send-steps
In a block-step you can insert exception branches for the two kind of errors.
a) In transformations steps (properties) you can determine that the exception branch for mapping errors will be processed in case of an mapping error
b) In send steps (properties) you can determine that the exception branch for send errors will be processed in case of an mapping error
Regards Mario

BPM error at send step

Similar Messages

Maybe you are looking for