BPM: Messages are not merged?

Hello everybody,
in BPM i have
1) one receive step
2) fork with 3 branches
2.1)BRANCH1 map received message -> response_1
2.2)BRANCH2 map received message -> response_2
2.3)BRANCH3 map received message -> response_3
3) fork ends
4) transformation with multimapping
   map response_1 + response_2 + response_3  -> response_all
When I execute the BPM I see that only response_1 is mapped to response_all.
I see also that all three branches are executed.
So why is the only response_1 mapped to response_all and response_2 and response_3 are missing?
Thanks a lot
Regards Mario

Hello there
I have the same problem. In Messsage mapping I define two messages mapped to one massege.
In Interface mapping I define two source Interfaces and one target interface and mapping program from above.
Then I test Interface mapping and works OK.
When I put all this to BPM only first message is mapped.
Thanks for help
Regards Bojan

Similar Messages

  • BPM : Files are not appended in the container operation step

    Hi Guys,
    I am using the BPM pattern,  "BpmPatternCollectTime"  provided by the SAP  under SAP BASIS 6.4 for the N:1 transformation.
    In the the Message mapping and Interface mapping source structure has "0 to unbounded"  occurance and Target has 1 coourances.. I have given the Time as 5 Minutes to collect the messages...
    I dont know why the files are not being appened? Each time am getting the only one file's content as output other files contents(records) are not being merged.
    Is there anything wrong in the given BPM pattern? or  i  need to do any changes in the container operation step ?
    can anybody explain why the messages are not appending into a single file. any help would be really appreciated...
    Can anybody guide me , how can i debug the BPM?
    Thanks and Regards
    Venkatesh

    Hi Raj,
    The Source and target structure are the same ie, BpmPatternCollectMessageToBeCollected..
    Structure is
        BpmPatternCollectToBeCollected
        ID
        OverallNumber
    In SAP BASIS 6.4 , In the message maaping you can find the
    "BpmPatternCollectMerge". I am using the same mapping..
    The mapping contains the Source field mappings for field element ID and OverallNumber to the same field in the Target.
    After selecting Source's occurance for 0 to unbounded , In the mapping the tool itself is adding two extra nodes as below...
    Messages                                 
      Message1
        BpmPatternCollectToBeCollected
        ID
        OverallNumber
    Mapping is
    Source Structure ->Target Structure
    Messages (1)                  Messages  (1)
    Message1 (1)                  Message1  (1)
      BpmPatternCollectToBeCollected  (0-unbound)  BpmPatternCollectToBeCollected  (1)
        ID  (1)-------> ID (1)
        OverallNumber    (1)-------> OverallNumber
    The line indicates above the mapped fields...ID and OverallNumber is only mapped above.
    Regards
    Venkatesh

  • Sent Messages are not saved in Sent Mailbox

    It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

    The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
    If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
    If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
    To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
    Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
    If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

  • Cisco 5.0 "Your messages are not available now" after exchange 2010 and DC migration to a new host

    Guys,
    First of all, thanks for looking at this post. Hopefully you guys can help me out. My unity users, when dialing into voicemail are getting the message "Your messages are not available now".
    Services in error state under the event viewer:
    Event Type:    Error
    Event Source:    CSAgent
    Event Category:    Kernel Rule 
    Event ID:    256
    Date:        7/29/2014
    Time:        11:42:41 AM
    User:        N/A
    Computer:    UNITY
    Description:
    A packet with a bad transport layer header was detected. Reason: Illegal TCP reserved flags set using interface Wired\HP NC324i PCIe Dual Port Gigabit Server Adapter. TCP: 00.000.00.000/443->00.00.0.00/1241, flags 0x10. The operation was denied.
    Event Type:    Error
    Event Source:    CiscoUnity_MALEx
    Event Category:    Error 
    Event ID:    30012
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    An occurred which prevents successful Exchange access by CsBMsgConnector via MAPI.
    This is typically an indication of configuration issues with Unity, Exchange, or the MAPI subsystem.
    Verify that the Unity services accounts are granted the correct permissions and that there are no issues with installation.  The SysCheck utility may assist in diagnosing the problem.
    Event Type:    Error
    Event Source:    CiscoUnity_Doh
    Event Category:    Error 
    Event ID:    32013
    Date:        7/29/2014
    Time:        11:44:27 AM
    User:        N/A
    Computer:    UNITY
    Description:
    Doh logon failed due to messaging component logon error: 8004052eH
    I found and followed to the letter:
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/107323-unity-error.html
    I also went ahead and ran GUSI with some mixed results under environment information:
    SQL Version = Microsoft SQL Server  2000 - 8.00.2282: unknown SP
         SQL Edition = Desktop Engine
         Windows version =  5.2 Build 3790: Service Pack 2
         Outlook is not installed on the local server
         MAPI Provider : CDO Version - 6.5.8211.0
         MAPI Shared Memory: (HKLM:SOFTWARE\Microsoft\Windows Messaging Subsystem\Applications\<process>\SharedMemMaxSize)
                AvCsMgr : is set to recommended value
                AvMsgStoreMonitorSvr : RegKey not found.  Recommend add the key AvMsgStoreMonitorSvr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvNotifierMgr : RegKey not found.  Recommend add the key AvNotifierMgr and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                AvUMRSyncSvr : is set to recommended value
                CsBMsgConnector : RegKey not found.  Recommend add the key CsBMsgConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsBridgeConnector : RegKey not found.  Recommend add the key CsBridgeConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
                CsVpimConnector : RegKey not found.  Recommend add the key CsVpimConnector and set DWORD SharedMemMaxSize with a value of 4194304 (decimal)
             TCPChimney : Disabled
             RSS : Disabled
             *Pulled from UnityDB Configuration Table*
             ExcludeAllReceipts : 0
             ExcludeReturnReceipts : 0
             DisableSearchFolderUse : 0
             MinSearchFolderLifeHours : 1
             OptimizeSearchFolderUse : 0
    I tried following and deleting the Unity System Profile:
    https://supportforums.cisco.com/discussion/11249996/unity-501-exchange-2010-unable-logon-mapi-mailbox
    But I am still scratching my head. Any direction will be appreciated.

    Turns out that unity came back after all this. Maybe it just needed time. I think I answered my own question.  Anyways, this post could serve for future reference. 

  • PL/SQL log messages are not printing from Java concurrent program

    Hi,
    I have a strange issue while submitting the Java concurrent program through PL/SQL.
    I have a PL/SQL concurrent program which will invoke the Java concurrent program inside the package by use of "FND_GLOBAL.SUBMIT_REQUEST". It worked and submitted successfully. From that Java concurrent program we are calling some other PL/SQL packages and printing some log messages over there. But problem here is the request is only printing the Java log messages in view log but not the PL/SQL log messages.  But if I submit the Java concurrent program directly from SRS form at that it is printing both Java and PL/SQL log messages.
    I am just wondering how the log messages has not printed. Please provide your inputs to solve this problem.
    Thanks
    Suriya

    I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
    Any suggestions.
    FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
    https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Messages are not being saved on N96

    On my N96 I have set save sent messages and receive report as 'yes' but after updating firmware (20.050) messages are not being saved.Is there any solution to someone.

    I have exactly the same problem with my N95 but I can't really say when it started. Suddenly I just noticed my phone didn't save sent messages anymore and hadn't done it for some time, but can't really tell after what it started to occur. Really strange problem, not even reseting back to factory settings helped - after I put "receive report" option back it stops saving sent messages to sent folder. Actually if I go to "sent" folder quickly after sending the sms, it shows there for little moment before disappears. Really strange. I couldn't google any other information about this problem than this topic.

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • My sent messages are not displayed...what happened and how do I restore?

    My sent messages are not displayed...what happened and how do I restore?

    http://kb.mozillazine.org/Disappearing_mail

  • Mail 3, smtp, IMAP: sent messages are not saved on server

    Hello,
    I had problems using Mail 3 after I upgraded to Leopard, so I used Thunderbird for the time being. With the update 10.5.1 I tried again: most problems solved BUT: sent messages are not saved on the server in mailbox "Sent".
    Some background: I deleted the folder "<User>/Library/Mail" and "<User>/Library/Preferences/com.apple.mail.plist" and configured Mail from scratch.
    To be sure: I still have Thunderbird installed, and when I send with Thunderbird: a copy is placed in "Sent".
    Another thing I noticed: it takes more than a minute to send from Mail 3 and a few seconds when I send from Thunderbird. I have another Macbook Pro with 10.5.0 installed: same problem with sending.
    Any help is appreciated.
    rene

    Well, be stumped I did all that, but to be sure, I did it again:
    I have a lot folders with subfolders and they are shown under my account name.
    I created a new folder "test" in my IMAP account and designated it to be the new "Sent" folder. It replaces my previous Sent folder in the group Inbox, Drafts, Trash. My previous Sent folder now appears under my account name as a "normal" folder.
    I send a message and the Activity monitor says: +"Delivering message: copying message"+. After a minute Mail is done. I check my (new) "Sent" folder and it's empty. I double check in webmail: it's empty.
    So I go to the Finder and look in my IMAP folder: <user>/Library/Mail/<IMAP-account>/test.imapmbox and there is no folder "Messages", only Info.plist.
    Then I try to move a message to the "Sent' folder: for a minute the Activity moinor says: Copying messages: copying message" and then Mail prompts: +"The message "testing" could not be+
    +The connection to the server mail.hicetnunc.nl on port 143 timed out"+.
    So it looks like Mail has a problem with the default "Sent" folder: it cannot copy messages to that folder at all! Aha!
    But then I try to move a message to a "normal" IMAP folder: same thing! Mail cannot copy to any folder!
    In both instances Mail says: +"The message "..." could not be be moved to the mailbox "..."+
    +The connection to the server mail.hicetnunc.nl on port 143 timed out"+
    Last thing: I try to move a message to a folder in the same account again. But in the process I quit Mail. I open Mail again and Mail is performing pending operations: copying message. After a while Mail prompts: +"Operation could not be completed. (MFMessageErrorDomain error 1028.)"+ and crashes... I open Mail again and it tries to peform pending operations. Again: an error message and Mail crashes. This keeps going on so I delete the whole account and set it up again. Nothing's changed...
    I can receive and send, but sent messages are not copied to the "Sent" folder and I cannot move messages around within a IMAP account. But TADA!!!: I can move messages from account to account.

  • I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

    I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

    http://support.apple.com/kb/TS2755

  • Warning messages are not displayed in confirmation

    Hi,
    We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
    Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
    Thank you
    Natarajan

    Hi Muthu,
    Thanks for your reply. We raised the OSS message for this issue. As per  the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
    In the DELETE mode, the system will display only the first EXPRESS
    ERROR message and not WARNING messages.
    Inorder to maintain an error message as EXPRESS, the FIELD_NAME
    (i.e ls_message-field_name) has to be assigned with the value
    EXPRESS.
    For example,
    ls_message-msgty = 'E'.
    ls_message-msgid = 'ZF'.
    ls_message-msgno = '000'.
    ls_message-field_name = 'EXPRESS'
    Kindly note that in the DELETE mode, the system does not display
    EXPRESS message with msgty = 'W'.
    Only EXPRESS message with msgty = 'E' is recognised and displayed.
    The Warning messages will be displayed only during the CHECK mode.
    Thank You
    Natarajan

  • Messages are not displaying in  SXMB_MONI in R/3 system

    Hi,
          my scenario is  File -to Proxy (Inbound Proxy).. scenario is working fine... but those processed messages are not displyed in the SXMB_MONI screen in the R/3 System... .. but i wnat to see the messages in the R/3 system.. for this..any configuration is needed..  please suggest me..
    Regards
    Jain

    Thanks Aswin  and Praveen,
          Finally I got the messages in SXMB_MONI in R/3 system...  for that I added one more paramater additionally  along with  the parameters are suggested by  Mr.Praveen .. ..
    any ways.. these are the parameters  I added in the SXMB_ADM   for  your reference..
    category :RUNTIME parameter:Logging value :1
    category :RUNTIME parameter:Logging_sync value :1
    category :RUNTIME parameter:Trace_level value :1
    category :RUNTIME parameter:Logging_propagation value :1
    keep sharing the knowledge...
    Thanks
    Jain

  • Text messages are not coming in

    apple changed updated my new eamil address in itunes and now my messages are not coming in.help

    Hi nancy183,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Ensure that iMessage is turned on in Settings > Messages.
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iPhone: Troubleshooting Cellular data
    iOS: Troubleshooting Wi-Fi networks and connections
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Cheers,
    - Judy

  • Problem in ABAP Proxy(sometimes XML Messages are not being created)

    Hi,
    I am trying to send the data from ECC to CRM when post goods issue is done for a delivery from ECC side. I called my proxy method in BADI : DELIVERY_PUBLISH.
    And after calling the method, I used commit work also.
    But the problem is, some times it is working fine. and some times the XML messages are not getting created. When I go in debug, looks everything is fine.
    I am unable to understand why this inconsistency.
    Could you please help me out, do I need to take any more precautions.
    Thanks,
    Sandeep

    You mean you can't find any message in SXMB_MONI of your ECC or is it XI where you can't see message?
    If you have not checked in SXMB_MONI of ECC then may be messages are created but they are going into error and that's why you are not able to see any message in XI.

  • Messages are not moving to Error Queue in OSB if Error is Raised

    Hi All,
    My OSB process is as below.
    Queue1-->OSB-->Queue2.
    OSB Proxy is listening to the Queue1.When messages comes to Queue1 Proxy will pick the message and after applying the business logic it will put the message to Queue2.
    If OSB is not able to deliver the message succesfully to Queue2 then it should retry for 2 times.If retry exhausted then the message should move to the error Queue.
    I have configured Queue 1 with delivery failure paramaters redelivery limit and redelivery delay.Also the Connection factory is XA enabled.Even if any error happens (i am not using reply activity in the error handler) its retrying infinitely and messages are not coming to the error Queue.If i use reply activity its not retrying its failing at first time and the message is moved out of the main Queue1.
    Can any one please help me on this?
    Thanks.
    Edited by: 892479 on Dec 21, 2011 6:31 AM

    Since the messages are getting retried, it means that messages are getting rolled back to Queue1 when any errors happen. So transactional behavior is configured correctly.
    Now the problem yu face is that the messages are not moving to error queue.
    Make sure that you have configured following in the delivery failure tab of the queue>
    Redelivery Delay Override - delay in miliseconds between retries
    Redelivery Limit - number of retries
    Expiration Policy - Redirect
    Error Destination - Choose the error queue here
    After that make sure that the Server is restarted, even though a server restart sign is not mentioned on the config page, some of these settings might not take effect without a restart.

Maybe you are looking for