BPM : Files are not appended in the container operation step

Hi Guys,
I am using the BPM pattern, "BpmPatternCollectTime" provided by the SAP under SAP BASIS 6.4 for the N:1 transformation.
In the the Message mapping and Interface mapping source structure has "0 to unbounded" occurance and Target has 1 coourances.. I have given the Time as 5 Minutes to collect the messages...
I dont know why the files are not being appened? Each time am getting the only one file's content as output other files contents(records) are not being merged.
Is there anything wrong in the given BPM pattern? or i need to do any changes in the container operation step ?
can anybody explain why the messages are not appending into a single file. any help would be really appreciated...
Can anybody guide me , how can i debug the BPM?
Thanks and Regards
Venkatesh

Hi Raj,
The Source and target structure are the same ie, BpmPatternCollectMessageToBeCollected..
Structure is
    BpmPatternCollectToBeCollected
    ID
    OverallNumber
In SAP BASIS 6.4 , In the message maaping you can find the
"BpmPatternCollectMerge". I am using the same mapping..
The mapping contains the Source field mappings for field element ID and OverallNumber to the same field in the Target.
After selecting Source's occurance for 0 to unbounded , In the mapping the tool itself is adding two extra nodes as below...
Messages
Message1
    BpmPatternCollectToBeCollected
    ID
    OverallNumber
Mapping is
Source Structure ->Target Structure
Messages (1)                  Messages (1)
Message1 (1)                  Message1 (1)
BpmPatternCollectToBeCollected (0-unbound) BpmPatternCollectToBeCollected (1)
    ID (1)-------> ID (1)
    OverallNumber    (1)-------> OverallNumber
The line indicates above the mapped fields...ID and OverallNumber is only mapped above.
Regards
Venkatesh

Similar Messages

Files are not appended in the container operation step ?

Hi Guys,
I have a BPM scenario where i receive a single file with multiple transactions
1. Receive step receives the file and starts the process
2 Transformation Step - Splits the file into individual transactions
3. Block step --ForEach - Block has the follow 2 steps
        1. Send - Synchronus - sends the request of each individual transaction to a 3rd party system and receives the response.
       2. Container Operation: Appending all the responses into a single file.
    Properties of container operation:
Target: Multiline element (Block level element)
    Operation: Append
    Expression: Single element similar to structure above with out multiline.
4. Send Step: I am writing this file locally to a file and this always shows only the last transaction in case of ParForEachMode and first transaction in the case of ForEach mode.
can anybody explain why the messages are not appending into a single file. any help would be really appreciated
Thanks,
Srini

Hi Liang,
Check to see if the Sync Send step send every reply messages it received to container operation step:
You might need to remove the container operation to see if you receive each individual msgs.
> I have removed the container operation and i am able to see all the individual responses which i basically written to file just to cross check and every thing looks fine.
Another way to go to workflow log (Complete Process with all the steps) to get debug information:
SXMB_MONI -> Click "PE" under outbound queue -> Press "Display WorkFlow Log" button -> Click List with technical details -> Click Show Work item Container
Here you can see the container and XML message used in this process step.
You might have information on how message be processed in this step
> I have checked in the workflow log and workflow shows the container operation only in the case of ParForEach mode and when the block is in the ForEachMode i dont see any container operation step in the workflowlog and even in the ParForEach mode the container operation dosent have any details.
Your Container Element reference to response message should also defined in block level, since the response message only exist inside the block. However, using process level container element should not cause any problem
> I have defined the response messsage at block level in the container and the target i have defined it as multiline element defiend at process level. This multiline element is taken as input in the transformation step at prrocess level.
are there any other alternatives for this process, i dont understand why the container operation is not appending the elments.
any help would be appreciated
Thanks,
srini
Edited by: srinivas kapu on Feb 25, 2008 12:10 PM

Error: JAR-Ressources in JNLP-File are not signed from the same Certificate

I have two handfull jars, all signed in batch with the same
Certificate. When i start my App with Webstart it tells me:
Your JAR-Ressources in JNLP-File are not signed from the same Certificate.
"JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiert"
Well im shure that i signed all my jars with the same Certificate.
What can i do to solve this problem ???

I get the same error.
Strangely exactly every second time it works and every second time I execute the JNLP I get the following error:
network: Cache-Eintrag nicht gefunden [url: http://localhost:8080/fibo/lib/js_15R41.jar, Version: null]
network: Verbindung von socket://127.0.0.1:3621 mit Proxy=DIRECT wird hergestellt
#### Java Web Start Error:
#### JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiertCan this have something to do with browser caching? So that every 2nd time it tries to access the cache, fails. And than ignores the cache and works?
Any ideas?
Cheers,
Rio

Just purchased Nikon D610. tried to import 3 images and got this message: The files are not recognized by the raw format support in Lightroom. How do I fix this frustrating problem. Have been using Lightroom for years also Nikon products without any prior

How do I import images. Have a message that says: The files are not recognized by the raw format suppot in Lightroom. Am using a Mac version 10.9.4. the import is from a new Nikon D610. Am using LR 4.4 Please help Adobe is useless as a support.

Each camera must be supported explicity and your LR version is years older than your camera.
According to Adobe's Camera-support page, you need at least LR 5.3 to work with your D610 NEFs in LR:
Camera Raw plug-in | Supported cameras
If you don't want to upgrade to LR 5, or can't due to your OS being too old, then it might work to use the latest DNG Converter and create DNGs from your NEFs, which should open in LR 4.x. You can find the DNG Converter here: http://www.adobe.com/downloads/updates

Im running lightroom 4 and just purchased the Sony A7 and using its sd card. when I tried to load the photos, I got a message "the files are not recognized by the raw format support in lightroom"

Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
Does Lightroom 4 not work with the Sony A7?
Thanks,

Lightroom 4 cannot read the RAW photos from a Sony A7
You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly.

Canon 7D Mark II error "Files are not recognized by the raw format support in Light (149)"?

Has anyone tried to load raw files from a Canon 7D Mark II I get an error "Files are not recognized by the raw format support in Light (149)"?

Based on previous experience, I expect the final versions of LR, ACR and DNGC to be released simultaneously. We have so far seen Release Candidates of ACR and DNGC but not LR.
Unless there needs to be a second ACR/DNGC Release Candidate which happens once every few years for special circumstances, which I don't see any of at the moment.

Non-image files are not copied to the Backup Location

I'm on Aperture 3.0.3... I just noticed that non-image files (e.g., WAV files) are not copied into the Backup Location, although they are copied into the main folder location during an import. Does anyone else see this behavior?

Shawnsat,
Yes you can still stream from the host computer, the knowledge base article that describes this is http://docs.info.apple.com/article.html?artnum=305098. If you are attempting to display Photos on Apple TV, they must be synced to the Apple TV, per knowledge base article http://docs.info.apple.com/article.html?artnum=305139.
Cheers,
John

HT201272 Followed the directions on this page. Books are not listed among the options at step five, only movies tv shows and music, so how do I download my books then? I previously purchased two audiobooks on iTunes. They are available on my iPad, but no

Followed the directions on this page. Books are not listed among the options at step five, only movies tv shows and music, so how do I download my books then? I previously purchased two audiobooks on iTunes. They are available on my iPad, but not here.

If you go into Edit > Preferences then on the General tab on the popup that you get you should be able to select which types of content 'show' - tick the box against 'Books' :
Books then show under your 'Library' - if you select it, are those audiobooks listed there ?

EML files are not opened in the browser

EML files opened from a SharePoint 2010 document libraries are not opened in the browser. Instead, a dialog box is opened and prompts to save the file.
Since there's no standard application that knows how to handle EML files, and since the EML format is built into SP (send emails to document libraries), I think this behavior is unacceptable.
EML files should be opened in the browser, similar to SP 2007.

Seems the solution is in the client side configuration.
If eml files (as all other file types) are not configured to open by default in Outlook 2007 (or Windows Live Mail), they will be prompted for download or open.
The registry change link I provided earlier did not work for me. I tried this:
http://webcache.googleusercontent.com/search?q=cache:-hgG6T55trAJ:john-h-selnes.spaces.live.com/blog/cns!6C7F16530F119E8D!3092.entry+how+to+configure+sharepoint+to+opem+eml+file+in+outlook+2007%3F&cd=1&hl=en&ct=clnk&gl=us&source=www.google.com and
solved my problem. Seems by default eml file set to MIME message/rfc822 and associated with windows live mail - SharePoint team hates Outlook team, right?
If you do not have such assoication, it opens in browser!
My settings: MOSS 2007, windows 7, outlook 2007.

Downloaded files are not shown in the folder indicated in Options

"Options" shows that downloaded files should be in a a particular folder. I go to that folder via Windows Explorer and they're not there...other files are, however. So -- how can I access the downloaded files via Windows Explorer if they're not being saved as indicated. Where else could Firefox be putting them? (for testing I checked the "downloads" window list on firefox and compare to the files in the same folder on Windows...two completely different lists).

When you are in the Firefox Downloads window, right-click a file and select '''Open Containing Folder'''. That will open the folder that downloaded file was saved to.

Multiple OAM Files are not working on the layout, and now they are cropping? Need Help fast...

So an early thing since day one with muse has been when inserting HTML the preview is sometimes off, and even the container box is sometimes forced to be similar like a previously installed HTML bit. I figured this new site I am making at work could use some Adobe Edge Animate functions for rollovers and drop downs, and as I set this up I am getting errors the more OAM files I insert onto the page. The previews I was kind of already expecting to not work correctly, but no I am getting a situation where my OAM file will not display properly because of the containing box of the first Element I inserted. Here are some pictures explaining the issues...

This is a huge part of our site, please hurry with a bug fix or please dear god give me some tips for this work around. I am searching everywhere and getting nothing

New PC files are not updating on the LINK PC window

When I loaded the Link soft ware on to my pc it uploaded all my music/pictures/document files- perfect. However later I saved a new music file on my PC but it does not show on the LINK soft ware window? The file was a new itunes music file which I can see on Itunes but not on the LINK PC window. All the other music files came from the same source in itunes so I know that works. Is there some kind of refresh?

Hello guymad,
Are you able to add other new files to see if you experience the same issue? What is the source of this new audio file? Is it DRM protected?
Thank you,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

My files are not opening into the right program now

After updating to Adobe CC 2014 on all my applications, Illustrator, InDesign and Photoshop, my computer is not recongizing the proper program to open an ai, psd or jpg file into. I keep try to set my defaults using the Windows Explorer settings, but when I try to add Photoshop.exe as my default for a .jpg file, it doesn't add it as a valid option.
Any ideas on how to fix this? It's really broken my work flow.

Delete existing file associations before trying to "fix" them. You are simply suffering from context handler overflow, meaning there's too many actions associated with specific file types and Windows can't add more.
Mylenium

After a crash with Win XP Professional, I am missing all the important Profile files. How can I recover passwords and history if the key3.db and places.sqlite files are not shown in the profile folder?

I only have a large urlclassifier3.sqlite file in the old default profile folder. Help!

Sounds like boot sector corruption to me! I suggest you download Testdisk a product of CG Security. Use the latest version that is NOT beta. Boot the computer to a bootable CD such as Hiren's Boot CD. Run the DOS version. Do NOT write anything to the hard disk, such as a log! Do a deep search for lost partitions. When given the opportunity, look at files and folders. Finally, do a rebuild of the boot sector, and compare that to the current boot sector and backup sector. The write a verified version of the boot sector back to the hard disk. Note: Testdisk 6.11.3, under DOS, will show DELETED FILES IN RED. You can then OFFLOAD them to another drive or USB stick. Good luck.

Iweb files are not present in the program but they can be found on the HD

I've been working on this site via iweb and it been published but when i reopen iweb the contents are gone. However, i can find al the files for the site since i saved them to a "local folder". How do i get the files back into iweb without too much hastle.
I found the suppoert->iweb->domain but that opens an old website i created.
Any help will be much appreciated.

iWeb can't import the published files. If you cannot find the appropriate domain file with a Spotlight search, have a look here.....
http://iwebfaq.org/site/iWebBackupretrieve.html
You may also be interested in this ......
http://iwebfaq.org/site/iWebMultiplewebsites.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

BPM : Files are not appended in the container operation step

Similar Messages

Maybe you are looking for