BPM Queue problem

Hi there, i have a BPM with a Block step that has an infinite loop and collects delivery idocs, i have an exception set to 2 minutes or 500 idocs, basically when i send more than 500 idocs or it takes more than 2 minutes the first group is processed perfectly, but the remaining idocs are stuck on a queue visible under the smq2 with the status READY, does anybody has an idea of what could be the problem?,
Best Regards,
Roberto.

Hi there,
i cannot see any errors, i do have a correlation active by some region ID, but my test involves only delveries of 1 region, i don't know what could be wrong about the correlation, in addition the bpm steps goes as follow:
- infinite loop with a receiver step inside a block step with a timeout exception
- after that i transform those collected messages into 1
- synchronous call to a 3rd party via webservice
- send back the response to ECC
Roberto.

Similar Messages

Urgent : XI BPm Performance Problem

Hy All,
we have following big performance problem with BPM Scenario.
Of the inbound site we can get at the same time more than 10000 messages that have to be read from BPM queue. The BPm execution time in strongly affected and slowly. Could anyone tell me how to improve the performance (parallel queue execution.....).
I hope in your help.
Thank's a lot
Mat

Hi Mattia,
see for improving performace, you need to restructure your BPM process....if you want your input messgae to be processed in different queues, this is not possible if all your message are of same message type as then XI uses the same queue for all your messages..........so see in your scenario if BPM is really needed or you can do your scenario without BPM.......
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA

Sync BPM queue

Hi,
I have a sync BPM scenario with post a PO using webservices and then respond back to soap client and also a text file to ther receiver server. My problem is there was only a queue for the BPM but there will be many user will use this services to post PO. How can i increase the queue? Is that by select multiple queue? How can i solve this waiting queue problem?
Thanks
Edited by: fcgan on Dec 15, 2008 8:15 AM

Hi,
As explianed in the link by Prateek ,you can try with the option u201CMultiple Queues (Content-Specific)u201D.
What you mean correlation not work properly?
correlation will not work properly because messages handled by different queues(Multiple Queues) might start new process instances instead of being correlated to a running instance. and hence correlation will be affected.
Thanks!

What is Event queue problem?

HI,
I have come across JSF document, they mentioned that Event queue
Problem ins SUN's JSF implementation. what is that?

You're going to have to be a little more specific.

OSB 10.3 JMS queue problem: JMSCorrelationID is null

Hi everybody,
I am new to OSB/ALSB, and need some help regarding JMS message handling. I am trying to put some input data into a JMS queue( say, reqQueue) and to get the response from another JMS queue(say resQueue). My architecture is:
OSB proxy service->OSB business service->JMS queue(reqQueue)->BPEL process(through JMS adapter) ->JMS queue(resQueue)->OSB business service->OSB proxy service.
I have used JMSCorrelationID for response correlation. but my problem is that when I am trying to test the service from proxy service, I am getting the JMSCorrelationId as null in BPEL process as well as in the weblogic server JMS log, and as I am getting the CorrelationId as null, I am unable to correlate the response, so I am not getting any response.
This is urgent, please help me as soon as possible as possible.
Thanks in advance.
Joy

Sovled it..
OSB 10.3 JMS queue problem: JMSCorrelationID is null

BPM BpmPatternCollectTime problem

Hi,
I've been trying to get the example pattern BpmPatternCollectTime from SAP to work on PI 7.1. This pattern waits for messages and collects them into one message. I've checked my BPM against the SAP BPM and the only difference is that I'm using XSLT mapping in the Transformation step. Is this causing the problem ?
I've checked all the blogs I could find, searched for SDN messages, checked SXI_CACHE etc. to no avail.
Scenario is: I'm sending multiple IDOCS from SAP HR system via PFAL, each has 200 persons in them.
I map the IDOCs to the target format (XML) and collect them in the BPM and send to file adapter.
Problem is I only get the first IDOC contents in target message, and the rest are missing.
When I look at the BPM workflow log, Container tab, I can see that there are 3 messages in the MESSAGE_IN entry. I can open them and see the contents fine. This leads me to believe that my Correlation is working ok.
Also in the Block step the COLLECTMESSAGELIST contains 3 entries as it should.
Correlation says:
<CorrelationKey Version="001"><ID>SAP HR</ID></CorrelationKey>
Where 'SAP HR' is the content of the correlation XPath query I defined.
MESSAGES_OUT in the BPM workflow log contain the same 3 messages.
TRACE in the BPM workflow log shows that the mapping of the Transformation step executed ok. Transformation step Operations Mapping is using an XSLT mapping that is copying the input to output as is.
When the BPM is finished the target message only contains the first IDOC data.
How can I get the rest of the data to append to the target message ?
Kind Regards,
Jari Pakarinen

Hi,
Using this mapping XSLT I was able to get the BPM working:
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns="http://xxxx.com/xxx" xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<xsl:template match="/">
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
      <ns0:Message1>
        <xsl:copy-of select="*"/>
      </ns0:Message1>
    </ns0:Messages>
</xsl:template>
</xsl:stylesheet>
This means you have to wrap the mapping inside
<ns0:Messages><ns0:Message></ns0:Message1></ns0:Messages>
tags. This took a while to find out.
Jari

BPM queue get block

Hi,
I have a web services that use bpm scenario. Every time when a error example date type format happen on the bpm the queue with get block on smq2 and others request by the web services will get hold. Any way that can i disable this? Every time i have to delete the error queue in order to let the webservices work again.
Thanks for help.

Hi Fcgan,
Use these reports to handle the queue in automated manner.
· RSARFCSE: Restart an LUW (background job)
· RSARFCEX: Restart tRFC LUWs (background job)
· RSQOWKEX: Restart QOUT qRFC LUWs
· RSQIWKEX: Restart QIN qRFC LUWs
· RSARFCSE: Delete an LUW (background job)
· RSARFCER: Delete various LUWs
Thanks!

BPM 11g: problem initiate task from API

Hi all,
First of all, i have deployed a BPM process and his initiator task is a human task implementation. Then the user can click on it in teh workspace and they are redirect to my J2EE aplication, in wich i want throw a new instance of my process when the user complete the form data.
I'm do know how to implement it, and i trying two ways:
one: initiate a process instance with oracle.bpm.service. package the the server give me this error:
http://kr.forums.oracle.com/forums/thread.jspa?messageID=9244238
java.io.InvalidClassException: oracle.bpel.services.workflow.verification.impl.WorkflowContext; local class incompatible: stream classdesc serialVersionUID = 3642712178109525089, local class serialVersionUID = 1
two: initiate a new task programmatically, is it wright? a new task of my human initiator task from java is that i need for create a BPM Process? i don't know, becouse i get this other error:
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/bp_worklistcust.htm#CIHEAFBB
WSM-09004 Component auditing cannot be initialized
any ideas? thank you very much in advance, and sorry for my poor english.

I hope you have got the solution for this problem.
will you please share the solution. as I am also facing the same...
Thanks

BPM Worklist Problem After Setting Frontend Host and Port

Hi all,
I was following the EDG for SOA 11.1.1.5 and was encountering a problem with the BPM Worklist after setting the Frontend Host and Port. We have a topology that includes a load balancer that terminates SSL, two OHS instances, and two SOA instances on separate VMs. When BPM Worklist was loading, it was calling webservices internally through the load balancer, but WebLogic was expecting them as http://. It was not able to resolve the HTTPS port that was being sent from the load balancer through the 80 to 443 redirect.
What the current EDG does not tell you, is that you have to also turn on "Enable Weblogic Plug-In" for WebLogic to use the OHS plug-in. I did it at the domain level, as all traffic will go through the load balancer. This essentially tells WebLogic that all URLs are https://
Here is an exerpt from the SOA.out log file:
<Sep 8, 2011 9:32:06 PM PDT> <Error> <oracle.soa.services.workflow.worklist> <BEA-000000> <<.> Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
ORABPEL-10585
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
Caused By: javax.xml.soap.SOAPException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: text/html; charset=UTF-8
What it is also missing, is that you should also set the SOA Infrastructure ServerURL mbean for the load balancer, to match the frontend host and port. Do this through Fusion Middleware Contol. Otherwise, you could encounter URL mismatches.
I hope this helps someone else.
I've asked Oracle to add this to the EDG for SOA. It's in the IDM guide, but not in any other EDGs.

Thanks Josh. It helped me infact in 11.1.1.4 Enable Weblogic Plug-In is not required. But 11.1.1.5 I thing it is mandatory. Oracle should have a clear documentaion.

Sync/Async BPM scenario : Problem at Integration Process..!!

Hi All,
I am doing Sync/Async BPM scenario.
start ->Receive(Request)> Transformation(Responsemap)>Send(SendtoR/3)->Send(Send Response) ---> stop.
When Iam trying to Activate, Integration process giving errors as
Source parameter AA_Payment_Req | http://XXXXXXXXX.com/SAP_PI/DirectSales/Payment not set Target parameter AA_Payment_Response | http://XXXXXXX.com/SAP_PI/DirectSales/Payment not set
Warning: Container element Response is defined but is neither initialized nor used.
But I am using them in the BPM. The same kind of scenario is working for another interface which is already running in production. When I tried to check that interface it is showing only Warning message as Container element Response is defined but is neither initialized nor used.
I tried deleting and creating again and still it is showing the same error.
Can anyone please suggest what might be the problem.
Regards
Deepthi

Hi,
could you pls let me know how its solved, while i am trying the same i am also getting the same problem..
could you pls explain bit more on this.
Thanks,
Venkat.

BPM giving problem in Merging and Splitting

Hi Gurus,
Im trying to BPM scenarios,
First i tried to Merging Two message and send to one receiver system. In that both Sender and Receiver communication channel are wokring fine.. all are showing green light.. and the files also got processed from sender side but i cant get result the output side. i checked my abstract interfaces , interfacing mapping and Container variables in IP everthing is right.. Even this is not 1:N or N:1 mapping , all message types are having occurance of 1:1 only. when i checked using SXMB_moni... there my two sender are succesfully sending the messages and ip getting the message.. after IP should act as a sender right. that msg not there... what would be the problem... even correlation also correct using the common filed's xpath i was combing the msg. In IP im getting the Yellow color warnin like correlating not used in sender step but no error. but i activated the correlation in sender step and assigned the xpath of the common field.
After that i tried to do splitting same problem occuring.. no message in receiver side.. i double checked my abstract interfaces, inbound , outbound interfaces, interface mapping and container variable everthing was assigned properly. In IP Only a blue color waring i getting like receiver determination initialized but not used but no error , but when i checked the interface determination it was fine.. i created receiver type local variabled with multiline . this is not 1;N or N;1 mapping... a simple mapping
Please help me experts,
Regards,
Balaji

Hiii experts ,
Please help me.. i have tried many times.. still the same problem exits...
source msg type having 5 elemtn.. first 2 element mapped first target msg type and remaining fields mapped to receiver 2 target msg type.
IP step are configured as below
Container Variables: send,recv1, recv2, 2 receiver type msg for receiver determination (Receiver1, Receiver2) both are multilined.
Receiver step : sender msg type (sender abs interface type)
Transformation : Has the interface mapping and one source msg and 2 target msg
In fork
Branch1:
receiver determination1 :receiver msgtype (recv1) and the multiline element (receiver1) type of receiver.
sender1 step: receiver msg type (recv1) and Receiver from-> Receiver List : Receiver->Receiver1
Branch2:
receiver determination2 :receiver msgtype (recv2) and the multiline element (receiver2) type of receiver.
sender2: step.. receiver msg type (recv2) and Receiver from-> Receiver List : Receiver->Receiver2.
But msg going to IP.. after that IP not start to send msg...
Please tell me.. what im doing wrong here?
Regards,
Balaji

BPM Cache Problem

Hi All,
I hav created a Business process. when i modified that process, it is not getting reflected in the SXI_CACHE. No matter how many times i activated it, it is not getting modified. i tried for around two hours and restarted the server again as the last alternative. I had refreshed the cache even with the mode 'full' which din't result in the expected outcome.
Any suggestions about this as i don't want spend two more hours next time.
Thnx
Anil.

Hi guys,
I had done the samething which u ppl were mentioning for two hours. but my problem is that the BPM is taking the previous version itself.And i din't know how to enable BPM to consider the latest version.And now, my problem got solved.
In the Integration directory, i deleted my integration process(say MyXXXBPM) and created a new integration process with the same name(MyXXXBPM) and imported the same process. It is taking the latest version now.
Anyways.......Thnx guys
Anil.

ADF-BPM integration problem.

Hi,
1.I have a small scenario like integrate oracle ADF screen with Oracle BPM Human Task. we didn't use auto generate task form(we are using one adf application which is already developed in Oracle Adf technology).
2.Those adf screen is populated in BPm work space using url of ADF screen placed in em console.It's fine,it will populated in work space.
3.But my problem is we can click on the buttons approve or reject on populated adf screen then only human task will modify the running state to completed state.
Any one have the idea on my requirement Please give the reply.
(OR)
Is there any other option can u please post the solution.
1. My actual scenario is integrate oracle adf Screen with Oracle BPM humantask.(already devloped. note not an auto generate adf application).
2.That screen Would be populated in BPM work space.So user login to BPM Work space And click on the tabs Reserved or cancel on populated adf screen.
3.Then only the human will be the state like running to completed state.
Edited by: Alluri.S.Raju on Dec 6, 2012 12:45 AM

Hello Rudra Raju,
Did u get the solution...
Even iam looking for the same..
Also I need to pass the Employee ID from Human task to ADF UI So that the User can download the file based on the Employee ID.
ThankQ!!

JMS queue problem integrating with TIBCO

Hi all!
We have several communication channels between XI 3.0 (SP21) and TIBCO via JMS queues. All of them are working fine except one. This problem only happens in development and quality systems with SP21, production has SP17 and doesn't have this error on the same communication channel.
We are getting the following error in communication channel details...
27-03-2008 16:32:21   XI message ID corresponding to the JMS message ID 'ID:EMS-QUALITY.14C46ECF3303EC:61' has the value 'null', with the ID: prefix removed+
27-03-2008 16:32:21   XI message ID corresponding to JMS message with ID 'ID:EMS-QUALITY.14C46ECF3303EC:61' will be created with same value as JMSCorrelationID with value 'null'+
27-03-2008 16:32:20   Error while processing message 'null'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error in converting Binary message <?xml version="1.0" encoding="UTF-8"?> <ns0:MT_PedCarga_GE xmlns:ns0="http://pt.galp.is-oil.ec">    <Partner>        <ZIDIF>62</ZIDIF>    </Partner>    <Controle>        <Nr_Envio>29183049</Nr_Envio>        <Dt_envio>20080229</Dt_envio>        <Tipo_Carga>CPAT</Tipo_Carga>        <Operador>230</Operador>    </Controle>    <PedCarga>        <FRETE>            <Tipo_Registo>N</Tipo_Registo>            <Inst_Carreg>ES41</Inst_Carreg>            <Data_Execucao>20080228</Data_Execucao>            <Resp_Transporte>13</Resp_Transporte>            <Transporte>          </Transporte>            <Transportador>1700</Transportador>            <Ref_Externa_head>2008022931859</Ref_Externa_head>            <Gera_Docs>X</Gera_Docs>            <Imprim_Docs>X</Imprim_Docs>            <Imprim_Ordem_Carreg>X</Imprim_Ordem_Carreg>            <Confirm_Autom>X</Confirm_Autom>            <Operador>230</Operador>        </FRETE>        <ENTREGA>            <Tipo_Destinatario>1</Tipo_Destinatario>            <Local_Entrega>14018</Local_Entrega>            <Cod_Produto>GOA []</Cod_Produto>            <Quantidade>05100</Quantidade>            <Ref_Externa_Item>01737307470601</Ref_Externa_Item>            <Regime_Fiscal>N</Regime_Fiscal>        </ENTREGA>        <ENTREGA>            <Tipo_Destinatario>1</Tipo_Destinatario>            <Local_Entrega>14018</Local_Entrega>            <Cod_Produto>GOC []</Cod_Produto>            <Quantidade>13300</Quantidade>            <Ref_Externa_Item>02737307470602</Ref_Externa_Item>            <Regime_Fiscal>R</Regime_Fiscal>        </ENTREGA>    </PedCarga> </ns0:MT_PedCarga_GE> to XI message for message: null: InvalidParamException: Invalid message id: com.sap.guid.GUIDFormatException+
Any clues?
Regards,
Fernando Figueiredo

We changed the conversation ID from Message ID to Correlation ID.

Integration Sap PI - JCAPS through JMS queue problem

Hi to all,
we have to send data through Sap PI 7.1 to an application server Sun Seebeyond JCAPS via JNDI JMS.
We created a Simple Java Test Class that sends data to Jcaps Queues using stcms libraries suggested from Sun.
I already tested this code on Eclipse, and it works fine. (Jcaps receive correctly messages sent from Java Class)
Using JMS Communication Channel on Sap PI with same settings used on Java Class (Queue Connection Factory, Initial Context Factory, URL, Queue Name) and deployed the same stcms libraries on PI,
Jcaps doesn't receive any message. In ABAP Monitor and Communication Channel Monitor we don't check any error: infact in CC Monitor a "Succesfully Connected to Queue" is displayed.
During our tests on Java Class, we tried to change CreateQueueSession istruction ( qsession = qcon.createQueueSession( false, javax.jms.Session.CLIENT_ACKNOWLEDGE ));
we checked that any other setting (changing parameters required from Java Method), different from setting just exposed,
messages are not received from Jcaps and we don't have any error during sending operation (like happens in Sap PI).
So correct setting to send message to JCAPS are:
Transacted = False;
acknowledgeMode = CLIENT_ACKNOWLEDGE;
How we can set this parameter in JMS Communication Channel on Sap PI?
If the CC configuration is correct, where we can find the problem and what kind of issue could be? On client side (Sap PI) or on Server side (JCAPS)?
Thanks

In order to set Transacted = false, uncheck "Transactional JMS Session" in the Processing Tab of JMS adapter. Keep in mind that the message delivery is NOT guaranteed in such a scenario. It is recommended to use transactional sessions in JMS scenarios.
The JMS sessions created by JMS adapter are of type "AUTO_ACKNOWLEDGE".
Regards,
TK
Edited by: Sameej T.K. on Oct 20, 2010 10:47 PM

BPM Queue problem

Similar Messages

Maybe you are looking for