BPM start

Hi all,
Iam new to BPM and want to know if I have to make an integration process ,what is the best way of processing the inbound messages-
With buffer setting (Know that this will affect performance).Any ways to counter it?
OR
Without buffer setting (If Iam going this way,Is there any tips how a integration design should look like)
Also I would like to try out an BPM example which tells step by step on how to create an integration process using the editor which includes defining exceptions,exception handling.If in a "BLOCK",if the "recieverfrom" is choosen as "sendcontext",what should be there in the "sendcontext" property field or where should it be defined and how?
Would appreciate it....
Thanks
P

Hi,
First you want to know the all steos in Intergration Process and how to use them,some steps takes more resources to execute.
refer below link how to define best integration process
http://help.sap.com/saphelp_nw04/helpdata/en/43/d92e428819da2ce10000000a1550b0/content.htm
Regards,
Raj

Similar Messages

  • BPM startting with two IDoc Types

    Hi All!!
    I have designed a BPM starting with two IDocs (MATMAS05 y CLFMAS02). Is designed with two start process in a switch. When one comes, wait a minute for the other. I'm not sure what IDoc comes first to the process, the I can lose data.
    Somebody has any idea tto encapsulate the infornmation of the 2 IDocs without a ZIDoc?
    Thanks and regards,
    Manuel Míguez.

    Hi,
    sounds like a
    > Collecting and Bundling Messages - Multiple Interfaces
    scenario like described here:
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/frameset.htm
    Regards
    Patrick

  • Blogg RFC scenario using BPM - starter kit (more detail on BPM required)

    I follow this blog to the letter - because it is the same as my scenario:
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    The problem is I have no experience with BPM. I have setup the Integration process as I think it should be but I get an error.
    Could one of you experts go through the BPM steps in more detail? Screen shots/details of the properties and containers on each step would be very useful. Thanks.

    Hi Lynn!!
    Check this SAP help for certain requirements when to use BPM:
    http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/content.htm
    Take a look at this blog by Michal,
    /people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in BPM
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in BPM
    Check this weblog for a step by step procedure:
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    or case study go thru this blog:
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
    for checklist:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
    Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,
    /people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform
    Thanks !!
    Pls reward if useful

  • BPM Start Process

    We have scenario(file to file) where we get multiple files and is merged using BPM, transformed and sent to the receiver. We have file This is a time based collection. Incoming file adapter is set to poll every 30 sec, and the block in BPM timeout in 2 mins ( for testing purpose).
    The BPM receive step (inside the loop) has the start process turned on. The expected behaviour was to receive all files in one instance of BPM and send the merged one out.
    It is spawning the multiple BPM instance based on number of files in the sender file adapter. My guess is it is doing this since we have the start process on receive step and for each receive it is starting a new process. How do we eliminate this to have only one instance start as I am not finding any other step prior to receive ( block , and loop) where I can start the process.
    Any help is appericiated.
    Thanks,
    Samir

    1. If you want to merge the same file format , Use "Loop" step before "Recevie" step. Put some deadline branch , which will ensure your time limit.
    This would resolve your problem.
    2. If you want to merge different file format , you need to have multiple "Receive" steps and for that you need to use the "Fork" step.
    Let me know if you still find any problem.
    Thanks & Regards,
    Dijesh Tanna.

  • BPM start process from WD UI

    Hi all,
    I am quite new with BPM in the SAP environment and for the moment I am strugling with the start of a process using an WD UI.
    What i have is a simple process with two activities. The process starts with no problems from the respository and also I created a wdsl and managed to start the process from the wsnavigator.
    Now I want to start the process from a simple UI. For that I created a WD component, assigned it to an app and connected to a model. Next I edited my portal to have a new folder with a page that contains my app.
    The UI has to fields and a button. My goal is to use that button to start my process.
    Probably I am doing something wrong when creating the action and maybe someone can help me with the java part on the actual button action.
    Please help. Thank you.
    Regards,
    Stefy

    I've made a lot of research and of course found a lot of forums and help. But for the moment I had some issues with addapting them completely to my situation, since I have to prior experience with this.
    For example I think this is the best solution that I have found so far: /people/arafat.farooqui/blog/2010/06/23/introduction-to-sap-netweaver-bpm-part-6
    but at the following step:
    / Bind the object
    wdContext.nodeRequest_Name().bind(objRequest);
    I can't figure out what is the nodeRequest_Name()...
    couldn't find this "asset" in my WDContext.
    Regards,
    Stefy

  • NW BPM start event not calling

    Hi Experts,
    I have deployed below process instance with start event having message trigger - synchronous service interface.
    While testing from soapUI it gives error like:
    <SOAP:Fault>
             <faultcode>SOAP:Server</faultcode>
             <faultstring>Server Error</faultstring>
             <detail>
                <jpr:Fault xmlns:jpr="http://com.sap/aii/proxy/xiruntime/">com.sap.aii.proxy.xiruntime.core.ESPXISystemFaultException: Error encountered during processing of XI request message in inbound ESP; Hint: com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: Technical difficulties were experienced during process execution.</jpr:Fault>
             </detail>
          </SOAP:Fault>
    I already searched SDN on the above error, but no clue.
    So I am pasting complete logs from NWA:
    process()
    [EXCEPTION]
    com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: Technical difficulties were experienced during process execution.
    at com.sap.glx.adapter.app.ucon.UnifiedConnectivityAdapter.invokeProvisionedMethod(UnifiedConnectivityAdapter.java:1021)
    at com.sap.glx.adapter.app.ucon.wsprov.GalaxyImplementationContainer.invokeMethod(GalaxyImplementationContainer.java:109)
    at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process0(RuntimeProcessingEnvironment.java:710)
    at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:662)
    at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:322)
    at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:245)
    at com.sap.engine.services.webservices.espbase.xi.impl.ESPXIMessageProcessorImpl.process(ESPXIMessageProcessorImpl.java:38)
    at com.sap.aii.proxy.xiruntime.core.esp.ESP_XI_MessageAdapter.invokeXI2ESPProcessor(ESP_XI_MessageAdapter.java:430)
    at com.sap.aii.proxy.xiruntime.sbeans.esp.xiproxies.SyncInvokeWSInterfaceIn_PortTypeImpl.syncInvokeWSInterfaceIn(SyncInvokeWSInterfaceIn_PortTypeImpl.java:23)
    at com.sap.aii.proxy.xiruntime.sbeans.esp.xiproxies.SyncInvokeWSInterfaceIn_PortTypeBean.invokeMethod(SyncInvokeWSInterfaceIn_PortTypeBean.java:71)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulTransactionAssociation.invoke(Interceptors_StatefulTransactionAssociation.java:45)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulSessionInstanceGetter.invoke(Interceptors_StatefulSessionInstanceGetter.java:37)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:172)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:99)
    at com.sun.proxy.$Proxy3245.invokeMethod(Unknown Source)
    at com.sap.aii.proxy.xiruntime.core.XmlProxyJ2EE.parallelWSCall(XmlProxyJ2EE.java:649)
    at com.sap.aii.proxy.xiruntime.core.XmlProxyJ2EE.call(XmlProxyJ2EE.java:147)
    at com.sap.aii.proxy.xiruntime.core.XmlProxy$ProxyBeanCaller.call(XmlProxy.java:206)
    at com.sap.aii.proxy.xiruntime.core.XmlProxy.processRequest(XmlProxy.java:181)
    at com.sap.aii.proxy.xiruntime.core.XmlInbound.processRequestMessage(XmlInbound.java:115)
    at com.sap.aii.proxy.xiruntime.core.XmlInbound.processMessage(XmlInbound.java:78)
    at com.sap.aii.proxy.xiruntime.sbeans.JPRBean.onMessage(JPRBean.java:156)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulTransactionAssociation.invoke(Interceptors_StatefulTransactionAssociation.java:45)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatefulSessionInstanceGetter.invoke(Interceptors_StatefulSessionInstanceGetter.java:37)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:172)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:99)
    at com.sun.proxy.$Proxy3271.onMessage(Unknown Source)
    at com.sap.engine.messaging.impl.spi.ServicesImpl.deliver(ServicesImpl.java:362)
    at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1098)
    at com.sap.engine.messaging.impl.core.queue.consumer.RequestConsumer.onMessage(RequestConsumer.java:75)
    at com.sap.engine.messaging.impl.core.queue.Queue.run(Queue.java:1033)
    at com.sap.engine.messaging.runtime.MSWorkWrapper.run(MSWorkWrapper.java:58)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:185)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:302)
    Caused by: com.sap.glx.core.kernel.api.TransitionRollbackException: Exception during prepare, rolling back
    at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.rollback(AbstractTransactionBase.java:701)
    at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:196)
    at com.sap.glx.core.kernel.mmtx.AbstractTransaction.commit(AbstractTransaction.java:77)
    at com.sap.glx.adapter.app.ucon.UnifiedConnectivityAdapter.invokeProvisionedMethod(UnifiedConnectivityAdapter.java:987)
    ... 77 more
    Caused by: com.sap.glx.core.kernel.api.TransitionRollbackException: Exception during prepare, rolling back
    at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.rollback(AbstractTransactionBase.java:701)
    at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:196)
    at com.sap.glx.core.kernel.mmtx.AbstractTransaction.commit(AbstractTransaction.java:77)
    at com.sap.glx.core.kernel.mmtx.PrimaryTransaction.inPrepare(PrimaryTransaction.java:163)
    at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:194)
    ... 79 more
    Caused by: com.sap.glx.core.kernel.api.TransitionException: An exception occurred while executing the script "_Ariba_Order_request:START_EVENT_UC_Start(
          com.sap.glx.adapter.UnifiedConnectivityAdapter:Request request,
          com.sap.glx.adapter.BPMNAdapter:Event_0_Start_5b8dad8a77346e54760570e1d1c8c088 event){
      messageId=request:messageId;
      initiator=request:initiator;
      kicker=request:kicker;
      instance=new com.sap.glx.adapter.BPMNAdapter:Instance_0_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(initiator, null, kicker, false, messageId, null);
      bridge=new com.sap.glx.adapter.internal.Synchronizer:Bridge_0_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance, null, null, null, null);
      bridge:setRequest(request);
      token=new com.sap.glx.adapter.BPMNAdapter:Token_0_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance, 2, null, null, null);
      delete event;
      exit=new com.sap.glx.adapter.BPMNAdapter:Exit();
      exit:onActivation("E0B249478BB1FD54F78611E3B53000059A3C7A00", instance, token);
      delete exit;
      controller=new com.sap.glx.adapter.internal.ExceptionAdapter:ExceptionController();
      controller:setContext(token);
      delete controller;
      scope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_1_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      view_7=new com.sap.glx.adapter.internal.ContainerAdapter:View_2_TextVariables_5b8dad8a77346e54760570e1d1c8c088(instance, scope, -1, false, false, null);
      instance:setContainerObject("TextVariables", view_7);
      scope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_3_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      role_5=new com.sap.glx.adapter.internal.ContainerAdapter:View_0_Ariba_Order_request_PotentialOwners_5b8dad8a77346e54760570e1d1c8c088(instance, scope, -1, false, false, null);
      scope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_4_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      role_8=new com.sap.glx.adapter.internal.ContainerAdapter:View_3_Ariba_Order_request_ExcludedOwners_5b8dad8a77346e54760570e1d1c8c088(instance, scope, -1, false, false, null);
      scope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_5_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      role_6=new com.sap.glx.adapter.internal.ContainerAdapter:View_1_Administrators_5b8dad8a77346e54760570e1d1c8c088(instance, scope, -1, false, false, null);
      instance:setContainerObject("Administrators", role_6);
      scope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_6_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      context_2=new com.sap.glx.adapter.internal.ContainerAdapter:Context_1_ProcessInstanceAttributes_5b8dad8a77346e54760570e1d1c8c088(instance, scope, 0, false, false, null);
      instance:setContainerObject("ProcessInstanceAttributes", context_2);
      scope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_7_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      context_3=new com.sap.glx.adapter.internal.ContainerAdapter:Context_2_respdata_5b8dad8a77346e54760570e1d1c8c088(instance, scope, 0, false, false, null);
      scope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_8_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      context_1=new com.sap.glx.adapter.internal.ContainerAdapter:Context_0_reqdata_5b8dad8a77346e54760570e1d1c8c088(instance, scope, 0, false, false, null);
      scope=new com.sap.glx.adapter.internal.TypeRegistry:Scope_11_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      context_4=new com.sap.glx.adapter.internal.ContainerAdapter:Context_3_payloadID_5b8dad8a77346e54760570e1d1c8c088(instance, scope, 0, false, false, null);
      payload=request:getData();
      mapper=new com.sap.glx.adapter.internal.Transformer:DataMapper();
      yves_in=new com.sap.glx.adapter.internal.Transformer:Data();
      yves_in:setData("", "$cXML", payload, "365B925081E9760C6CFC8AAE6A38BE4A");
      yves_out=new com.sap.glx.adapter.internal.Transformer:Data();
      data=context_1:getData();
      scope=new com.sap.glx.adapter.internal.TypeRegistry:GenericScope(null, "B0A4F97FB4313113B63F888AA86D7449");
      copy=scope:copy(data);
      delete scope;
      yves_out:setData("example.org/orderreq/Ariba_Order_request/Ariba_Order_request", "$example.org/orderreq/Ariba_Order_request/Ariba_Order_request:reqdata", copy, "B0A4F97FB4313113B63F888AA86D7449");
      data=context_4:getData();
      scope=new com.sap.glx.adapter.internal.TypeRegistry:GenericScope(null, "349213D98BEBBF54C08B2D9F20B3D5C7");
      copy=scope:copy(data);
      delete scope;
      yves_out:setData("example.org/orderreq/Ariba_Order_request/Ariba_Order_request", "$example.org/orderreq/Ariba_Order_request/Ariba_Order_request:payloadID", copy, "349213D98BEBBF54C08B2D9F20B3D5C7");
      mapper:map("E0B249478BB72A80F78611E38B9D00059A3C7A00_5b8dad8a77346e54760570e1d1c8c088", yves_in, yves_out);
      data=yves_out:getData("example.org/orderreq/Ariba_Order_request/Ariba_Order_request", "$example.org/orderreq/Ariba_Order_request/Ariba_Order_request:reqdata", "B0A4F97FB4313113B63F888AA86D7449");
      context_1:setData(data);
      data=yves_out:getData("example.org/orderreq/Ariba_Order_request/Ariba_Order_request", "$example.org/orderreq/Ariba_Order_request/Ariba_Order_request:payloadID", "349213D98BEBBF54C08B2D9F20B3D5C7");
      context_4:setData(data);
      delete yves_in;
      delete yves_out;
      viewUpdater=new com.sap.glx.adapter.internal.ContainerAdapter:ViewUpdater();
      delete viewUpdater;
      delete mapper;
      extractor=new com.sap.glx.adapter.internal.Transformer:DataExtractor();
      yves_in=new com.sap.glx.adapter.internal.Transformer:Data();
      data=context_1:getData();
      yves_in:setData("example.org/orderreq/Ariba_Order_request/Ariba_Order_request", "$example.org/orderreq/Ariba_Order_request/Ariba_Order_request:reqdata", data, "B0A4F97FB4313113B63F888AA86D7449");
      data=context_4:getData();
      yves_in:setData("example.org/orderreq/Ariba_Order_request/Ariba_Order_request", "$example.org/orderreq/Ariba_Order_request/Ariba_Order_request:payloadID", data, "349213D98BEBBF54C08B2D9F20B3D5C7");
      value1=extractor:extractAs("E0AAACCD28D4CDD4F78711E3840300059A3C7A00_5b8dad8a77346e54760570e1d1c8c088", yves_in, "BOOLEAN");
      delete yves_in;
      delete extractor;
      subscription=new com.sap.glx.adapter.internal.CorrelationAdapter:Subscription_0_Wait_for_response_message_5b8dad8a77346e54760570e1d1c8c088(instance, value1, null, null);
      subscription:addModifier(2, context_1);
      subscription:addModifier(2, context_4);
      new com.sap.glx.adapter.internal.LoggingAdapter:FlightRecorder_0_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088(instance);
      eventLogger=new com.sap.glx.adapter.internal.EventLogAdapter:EventLogger_0_Ariba_Order_request_5b8dad8a77346e54760570e1d1c8c088();
      eventLogger:createEntryWithMessageId(1, "E0B249478AE020FCF78611E3925F00059A3C7A00", instance, "E0B249478BB1FD54F78611E3B53000059A3C7A00", kicker, messageId);
      delete eventLogger;
    at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:83)
    at com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:196)
    at com.sap.glx.core.kernel.mmtx.DirectNestedTransaction.inPrepare(DirectNestedTransaction.java:69)
    at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:194)
    ... 82 more
    Caused by: com.sap.glx.core.kernel.api.TransitionException: An exception occurred while executing the script command "context_3=new com.sap.glx.adapter.internal.ContainerAdapter:Context_2_respdata_5b8dad8a77346e54760570e1d1c8c088(instance, scope, 0, false, false, null)"
    at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:803)
    at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:78)
    ... 85 more
    Caused by: com.sap.glx.core.kernel.api.TransitionRollbackException
    at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.rollback(AbstractTransactionBase.java:701)
    at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.rollback(AbstractTransactionBase.java:710)
    at com.sap.glx.core.dock.impl.GalaxyClassImpl.create(GalaxyClassImpl.java:234)
    at com.sap.glx.core.kernel.trigger.config.Script$NewInstance.execute(Script.java:368)
    at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:798)
    ... 86 more
    Caused by: com.sap.glx.core.kernel.api.TransitionException: Cannot find type for :#cXML
    at com.sap.glx.core.internaladapter.typeregistry.TypeRegistryImpl.instantiateSDO(TypeRegistryImpl.java:176)
    at com.sap.glx.core.internaladapter.typeregistry.TypeRegistryImpl.access$000(TypeRegistryImpl.java:51)
    at com.sap.glx.core.internaladapter.typeregistry.TypeRegistryImpl$3.invoke(TypeRegistryImpl.java:372)
    at com.sap.glx.core.dock.impl.DockObjectImpl.invokeMethod(DockObjectImpl.java:657)
    at com.sap.glx.core.internaladapter.ContainerAdapter$InstanceContainerHandler.onConstruction(ContainerAdapter.java:769)
    at com.sap.glx.core.dock.impl.DockObjectImpl.creation(DockObjectImpl.java:284)
    at com.sap.glx.core.dock.impl.GalaxyClassImpl.create(GalaxyClassImpl.java:224)
    ... 88 more
    --Divyesh

    Hi Jocelyn,
    sorry for OT question.
    I`m experiencing Transition exception a lot. But it Transition Exception caused by
    Caused by: com.sap.glx.core.kernel.api.CancelTransitionException: java.lang.IllegalArgumentException: Generator skipped on service 'cezdata.corp/wmsintegration/pr/pm/WMSIS019/WMSIS019_pool' operation 'SI_WMSIS019_In'
    Let me explain the bug - I have developed application with cca 30 BPM processes. Each of them, of course, has Message Trigger.
    But sometimes, that trigger just stops working and when I try to start a process, that exception is logged.
    It is quite easy to repair - I have to delete original Message trigger and create a new one from exactly same wsdl - so formally nothing changes.
    But it is really annoying, and my customer has grey hair out of that. It is unpredictable which process stops working because of that.
    I`m on SAP PO 7.4 SP06 (AEX, BPM, BRM)
    Dont you know what causes that problem and how to avoid it?
    Thank you

  • BPM start scenario

    Hi there,
    I have a BPM for a Leave request process which is working fine.
    For triggering the BPM I would like to have the following scenario:
    1. User has a link "Leave request" on our Intranet page (no SAP portal) to trigger the BPM
    2. The user is directly forwarded to the first WebDynpro "Fill leave request" of the BPM (without navigating through UWL).
    How can I achieve that?
    I've successfully started the BPM from WebDynpro, but that doesn't really help.
    Thanks in advance!

    Hi John, so you mean, I should take out the first Web Dynpro of the BPM (Fill leave request) and trigger the remaining BPM when pushing the submit button?
    Sounds ok, but on the other hand I take out an important step of my BPM.
    I think it would be better that a BPM always reflects the whole process with all activities included.
    Is there any other solution for this.

  • BPM start event(start condition) doesn't support ejb function call?

    Hi all,
    An id is included in the ws call to trigger the bpm flow,
    I have developed a ejb function, which is doing a simple check whether the process for the specific id is called before or not.
    I have a simple table in bpm java server which records the id used before.
    the ejb is called in the start condition, my desired behavior is: if the ejb returns true, no process should be triggered.
    but the thing is, my flow is not getting triggered once I put the ejb call in the start condition.(ejb is called, as i can see new id record inserted into my db table)
    I cannot even debug the process.
    I can debug the process if that ejb call is removed from the start condition.
    my server is 7.31 sp8
    Best regards,
    Jun

    Thanks for confirming Jun Wu.... always comforting to see even the experts can stuff it up from time to time... and very glad you were able to fix it!

  • Collect BPM - Start process and correlation in one Receiver

    I'm using collect pattern based on timeout. Somehow in my infinite loop, in the receive step, I cannot combine "start process" with creating correlation and using it. All in the same receiver. When I try to activate my BPM, in the processing log I get, "start process" trigger removed.
    Can someone throw any light on this....I've being trying this for over few hours now. I cannot get start process and correlation in one receiver. I must be doing something wrong.
    Even the copied BPMCollectPattern removes the start process from the receiver.
    thank you,
    Pam
    Additional info:
    The first message received starts the process within an infinite loop and activates the correlation "Correlation" by using IDoc message tyoe. Each subsequent message uses this correlation. The messages are received in the container element CollectMessage.In the loop the received messages are attached to the multiline container element CollectMessageList.

    Hi,
    We are also in SP12. So start process is not a problem, because you are getting an Information saying that "start trigger removed" right? It is not an error.
    Are you getting this eror "expression must not return multiline value" after your complete Integration Process desgin ? If So...
    I think you are getting this error in Transformation Step where you are doing N:1 mapping. In this step you are mentioning Interface mapping right? Once you mention Interface Mapping in Transformation step you need to give Source Message Structure as well as Target Message Structure. According to my understanding you are getting error here. You can check these errors, while design time itself. If your entries are showing with Red Border then it is understood that there is an error.
    So if error is here then I think you need to check your N:1 Mapping. In this mapping your Source side Messages should be 0...unbounded. Similarly in Interface Mapping also. Just check for Source Message Occurences...
    I think it will solve your problem.
    Thanks,
    Moorthy

  • Problem with BPm Starting

    Hy ,
    I have a strange problem. I defined a BPM Objects, message (files) have been received correctly, but no instance of the BPM have been started. I simulated the same BPM with another old XI System and it works.
    The error is an "Outbound Error" in the monitor (red flag).
    Thank's a lot for help.
    Matt

    Hi,
    Check the SXI_CACHE and see what i sthe return code for your BPM. It should be 0. If not then try activating it from there.
    Regards
    Suraj

  • BPM starting question

    Hi all,
    I have developed a BPM which basically reads 2 files (INVOICES and BILLING) makes some transformation and send it to a SAP R/3 system.
    Both files have a data field which it is used to correlate them.
    So when sender system send INVOICES file or BILLING file, SAP XI read it, begin the BPM which waits for the other to come. When the other file come the BPM continue in their next steps.
    But we have experienced the next situation:
    - Sender systems send 2 INVOICES files (duplicate files) and some time later send a BILLING file (only one).
    The process:
    1.- SAP XI reads the first INVOICE file and starts a BPM process.
    2.- SAP XI reads the other INVOICE file and starts another BPM process.
    3.- SAP XI reads the BILLING file and enroute it to the 2 BPM process
    Is there any configuration in my BPM or configuration scenario which doesn`t allow this situation. I only want one BPM for one pair of files.  
    Thanks.

    Thanks for your comments Udo.
    I need the correlation because there are days in which I receive several invoices and billing files (specially the first days of the month due to the bussiness process in sender system).
    But the source of the problem is on the sender system. Some times the generation of the files is done manually, and there are situations in which operator makes mistakes and generate multiple files for one day.
    The onwer of receiver systems wants that SAP PI can control this kind of situations. One situation is what I have described before: the BPM collecting pattern should work with two files.
    The normal behaviour is:
    INVOICE1 --> BPM (instance #1)
    BILLING1  --> BPM (instance #1)
    INVOICE2 --> BPM (instance #2)
    BILLING2  --> BPM (instance #2)
    INVOICE3 --> BPM (instance #3)
    BILLING3  --> BPM (instance #3)
    INVOICE4 --> BPM (instance #4)
    BILLING4  --> BPM (instance #4)
    But my situation is:
    INVOICE1 --> BPM (instance #1)
    INVOICE1 --> BPM (instance #2)
    BILLING1  --> BPM (instance #1) BPM (instance #2)
    Regards.

  • Synchronous BPM starting with HTTP Request

    Hello there,
    I have a requirement to call 3 web services, consolidate their responses, and sending back the results to the caller (a web page in this case).  The request is coming over HTTP (synchronously...the file sender scenario that is on SDN does not apply here). 
    I have tried the sync/async bridge to prototype this synchronous scenario, but I get the following error.
    "The process does not support the given synchronous interface or does not support synchronous messages"
    Since the Receive step only allows Async and Sync/Async Bridge options (which doesn't really apply here because all of my web service calls are synchronous), and off course the HTTP as well.  What options do I have to build this scenario via BPM (or without BPM)?
    Looking forward to the replies.
    Thanks

    Hi,
    I'm trying to build similar ccBPM process which processes a synchronous message sent from XI SOAP sender to a Web Service. Both sender and receiver systems are synchronous.
    Instead of going directly to the Web Service receiver, I would like the message to go through ccBPM.
    Can you give a sample for such process ?
    What receive step mode should be used - "Asynch" or S\A "bridge" ?
    I tried to receive the message using "Asynch" mode and than send it with "Synch" mode.
    A runtime error is generated:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
    <SAP:P1 />
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages Exception CX_WAPI_DEF_PROPERTY_NOT_FOUND occurred (program: SAPMHTTP, include: , line: 0).</SAP:Stack>
    <SAP:Retry>N</SAP:Retry>
    </SAP:Error>
    Please help !
    Thanks
    Orit

  • Synchronous BPM start

    hi,
    why do you need a BPM in this case?
    it's a standard sync - sync communication
    where not BPM is necessary
    Regards,
    michal

    Thanks all for help.
    Is a JDBC call synchronous or asynchronous? Means,
    which step do I have to use in BPM for this?
    @Moorthy
    The link you send me uses a synchronous sending step
    at the end of the BPM. Why do I have to use a
    synchronous step here? I don't want to receive
    a response in the BPM. Other examples (like the blog
    I linked above) uses a asynchronous sending step
    at the end.
    @all
    Is is only possible to select interfaces within a BPM
    from the same namespace? I couldn't select interfaces
    from outher namespace.
    regards
    chris
    Message was edited by: Christian Riekenberg

  • How to restart the stuck BPM ( started state)

    Hi XI experts,
    We need to restart the stuck BPM in XI. Please advise how to do this..
    Thanks in advance.

    Hi Mohan,
    You can directly restart the process by this transaction
    SWF_XI_SWPR
    Check the url
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/692b2cb6a93673e10000000a114a6b/content.htm
    if you dont click continue immediately, just execute the transaction and see the BPM. there is a option of Restart workflow
    Regards
    Suraj

  • RFC Scenario using BPM -- Starter Kit

    Krishna,
      I awarded points for my last line of questioning for 2 reasons.
    1) I think you're right about the Pipline URL
    2) I appreciate your help
      Where can I find my pipline URL?
    I looked in the profile directory and found one of the files with: icm/server_port_0 = PROT=HTTP,PORT=80$$.
    That's telling me 8000.... right?
      Also... which ICF server will I probably have to restart?
    Doug -

    Hi,
    Yeah..profile looks fine. After changing pipeline url, did you test the scenario?
    If not check it once.
    Regd. http service, you have checked correct one..anyway for this you can refer this configuration guide- section 8.1 if required- to know more
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
    Anyway first test it , hope it works.
    Regards,
    moorthy

Maybe you are looking for