Brand new hp laserjet p1102 and new toner cartridge out of toner after less than 100 prints ! ! ! !

Hi ,
I have just bought a brand new HP laserjet p1102 and a brand new toner cartridge, and within litterally 50 sheets being printed it says I am out of toner.
Please tell me what I must do to get this working again, because clearly I am not out of toner.
Thanks
Stephen

Hello , Welcome to the HP Community. I'd like to help you with the installation and printing issues you are having with your HP Laserjet Pro M201dw, on your Windows 8.1 operating system. I can certainly understand your frustration, it seems like you have attempted the install multiple times. First, I'd recommend running the Print and Scan Doctor, to see if it can resolve any errors in the software without having to re-install. If it does prompt you to re-install your software, I would suggest uninstalling all M201dw software from the Programs section of your control panel. Once that's done, do a cleanboot of your computer. You can find instructions to complete the cleanboot here: How to perform a clean boot in Windows Note: This will turn off all non-essential startup items, so if it's another program on your computer that is causing the installation to lag, it should resolve the install issue. Rather than installing from the download or the CD that came with the printer, I'd suggest downloading and running the HP Printer Install Wizard. Please respond and let me know if this helped to resolve the issue!Good luck

Similar Messages

Printing problem-new HP Laserjet P2015 and VERY slow printing-

I have a new HP Laserjet p2015, and while it does print, it is VERY slow—typically about 1 page per minute even for plain black-and-white Word documents. Much time spent with HP support, even got a new new machine… they're out of ideas and think it might be OS related…
Where do I begin to troubleshoot this?
Printer is connected directly to computer via USB.

I have downloaded new drivers, removed and added the printer multiple times, etc. As I mentioned, I've spent a few hours with HP support, tried new USB cable, even got a new machine. They now believe it's something with my system.
Any reason to believe that reinstalling my system software will help?
By the way: Printing from Text Edit is not faster. Or if it is, not very. In any case, it's not a realistic solution

I have i phone 4 brand new but the battery if i make it fully charge its take less than one day ? Why ?, I have i phone 4 brand new but the battery if i make it fully charge its take less than one day ? Why ?

I have i phone 4 brand new but the battery if i make it fully charge its take less than one day ? Why ?, I have i phone 4 brand new but the battery if i make it fully charge its take less than one day ? Why ?

Depends on usage, your cellular reception overall, and various settings during that time.

What is the difference between "new meeting request with" and "new meeting request"

Hi all,Can anyone tell me that what is the different between "new meeting request with" and "new meeting request" on Outlook?Please help me...Thanks!Tony

Are you using Outlook 2003? The option “new meeting request with” is only available when it is a public folder or shared calendar in OL2003.
Tony Chen
TechNet Community Support

Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

Castle15 wrote:
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Cannot get the Apple.. what?
Model and actual device you are talking about?
Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

Firefox freezes when I open it after less than a minute of searching. It freezes regardless of the website I'm on. I've tried reinstalling it several times and have even tried a clean reinstall but it didn't work.

When I open it, Firefox freezes after less than a minute of use. After waiting a few minutes, it unfreezes but then freezes again a few seconds later. This happens regardless of the website I'm on. I've tried uninstalling and reinstalling it and the problem didn't go away. I've even tried a clean reinstallation but it didn't work. This only happens on Firefox. IE and Safari work fine.

-Plug your MacBook into a power source.
-Click on the Apple menu and select "System Preferences".
-Click on the "Energy Saver" icon.
-Click on the "Options" tab.
-Uncheck the box labeled "Automatically reduce brightness of display before display sleep"
-At the top, next to "Settings for:", select "Battery" from the drop down menu.
-Uncheck the box labeled "Automatically reduce brightness of display before display sleep"

Photoshop CC 2014 stops working after less than 30 second and shuts down

I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

You have not provided any system information or crash logs, so we can't really know.
http://myleniumerrors.com/working-with-your-operating-systems-tools/
Mylenium

Thick, horizontal lines appear in both source and program viewer footage set to less than 100% ...

Can anyone help?
This has suddenly started across all projects, including those I have been working on for ages with no issues. Everything else seems to be exactly the same as ever in every other application, only PP is affected. The footage is all progressive (I rarely encounter interlaced nowadays), prores HQ 25fps, usually 1080 but also 720. Output to the monitor, via MXO2 mini is fine and has not changed at all. I can't think of any updates recently, certainly not in the past week, when this started.
It's really wierd and clearly wrong, but I can't begin to work out how to fix it, having exhausted all my standard fixes (settings in app, OS, hardware etc all checked and rechecked. Reboots done - all to no effect).
My system is:
MacPro 5,1 6-core 3.33GHz
12GB RAM
GTX285 Mac GPU - CUDA 5.0.45, GPU driver 1.3.4.0 (295.00.05f03)
OSX 10.7.5
PP CS 6.0.2
MXO2 mini - latest drivers etc
Any thoughts, much appreciated!
Thanks
Dominic

Well, I seem to have fixed it but none the wiser for why I had this problem.
Fixed it by upgrading my OS to OSX 10.8.3 (always a nerve trembling experience), after cloning my boot drive etc. Then I updated CUDA to the latest version, reinstalled my Matrox drivers and crossed my fingers! Happily, everything seems to be fine now. I can only think that the problem was, maybe, something to do with CUDA, as the only time I ever had an issue was using PP and playback was at less than 100% scale.

Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. How can I increase the storage space?

Question
Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?

Hi terrybohle1938,
Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
Hopefully this helps!

Hp laserjet p1102 and time capsule

my hp laserjet P1102 is working fine with my regular wireless netgear router, but wouldn't connect to my time capsule. the blue light is just flashing and the printer doesn't show up on the network. i tried everything on the timecapsule manual, everything on the printer manual, but it looks like it is just not sending the right type of radio wave or something. what to do?

There is probably a whole bunch of different issues happening here.
Lion and ML have just as much problem with losing connection to the TC as the windows computer will.
I suggest you do a factory reset of the TC..
You then need to set it up as a straight SMB (windows networking) device.
All network names must be SMB compatible. Short, no spaces.. no apostrophe for sure. pure alphanumeric.
That includes TC name, wireless name/s, passwords of course. and even the hard disk name.
In the file sharing page I would also turn on the guest access and set the WORKGROUP. Although that is more for disk sharing they should also help print sharing.
The printer name, I am not sure.. but you want that as simple as possible as well and following the above rules.
I am not at all sure the latest firmware is the panacea to all ills.. in fact I tend to run any TC i have on 7.5.2 and find it works better. Especially the older ones.
If it still doesn't work, it is a case of buy a new network printer.. when this lot of toners finish.. buy a new printer instead .. make sure it is network capable. Far better than using usb printers and since printers are cheap cf the consumables.. well worth it.
Also make sure it is airprint capable and preferably postscript as well although I don't know if the combo is available.

New block of IPs and new gateway to add on ASA5505

At this time I have on my firewall the following;
Subnet; 24.222.61.x
Gateway; 24.222.61.x
Subnet Mask; 255.255.255.240
Usable IP Range; 24.222.61.x to x
They gave me a new outside IP Addresses and GW;
Subnet; 24.222.92.x
Gateway; 24.222.92.x
Subnet Mask; 255.255.255.224
Usable IP Range; 24.222.92.x to x
How do I add the new outside network to my ASA?

Interfaces only support a single IPv4 address. If you are changing addresses, you can just redo the outside interface ip address line and any default route statement.
If you are keeping the old addresses plus adding the new ones, you have a couple of options:
You could configure a second "outside" interface with a different name which used the new subnet and address. However, there would be routing issues, so you might not like that.
You could have the upstream ISP route the new subnet to your old firewall address, and use the new subnet for NAT. This is particularly good for static inbound NAT scenarios.
You could configure a new DMZ style interface for the new subnet on the inside, and also have the ISP route the new subnet to the old outside address.
I use both strategies (2) and (3) with different chunks of my own public v4 space.
-- Jim Leinweber, WI State Lab of Hygiene

SNMP MIB file download needed for Laserjet 5550 and 1505n. Paper out, Paper jam etc.

Please assist me. I need MIB files for SNMP messages like paper out, paper jam, etc. The printers are LaserJet 5550 and 1505n. HP rules.
This question was solved.
View Solution.

Thank you for the help. I found out in a different manner but here it is:
On the rightmost side you can see the adress and in the middle the data type and name. They are all at position 0.
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperJam,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.9
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.8
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PeripheralError,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.6
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_ConnectionTerminationAck,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.5
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NewMode,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.4
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_InterventionState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.3
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_AtBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.24
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TcpBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.23
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LlcBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.22
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_NovBusy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.21
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Reserved,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.20
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.2
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PaperOutput,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.19
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Printing,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.18
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_DoorOpen,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.17
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Initialize,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.16
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Wait,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.15
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_Busy,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.14
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_IoActive,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.13
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_MemoryOut,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.12
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_PagePunt,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.11
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_TonerLow,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.10
syDeviceValueDefinitionWithVariableAddress,0,SnmpIntegerSPS,HP_LineState,SnmpIntegerSPS2ScadaInteger,Y,N,N,DIN,0,0,0,1.3.6.1.4.1.11.2.3.9.1.1.2.1
I hope it's useful for someone also.
Best regards to all forum users!
Cristian

HP Color LaserJet 2500 and new Airport Extreme

I have tried to connect my HP Color LaserJet 2500 to the new Airport Extreme USB port. Printer setup utility recognizes the printer but when I print I it always errors out. Any work around for this? I have noticed two other postiings for other HP models that are having the same problem. Is this a universal HP problem?

I have tried to connect my HP Color LaserJet 2500 to
the new Airport Extreme USB port. Printer setup
utility recognizes the printer but when I print I it
always errors out. Any work around for this? I have
noticed two other postiings for other HP models that
are having the same problem. Is this a universal HP
problem?
Futher information on the printing problem. The GIMP driver works. It is available at http://gutenprint.sourceforge.net/pSupportedPrinters.php3. This may be the answer for some folks with Inkjets or non-color LaserJets. It does not solve my problem because the GIMP driver only provides black and white support. No color.
Anyone know of an alternative driver that supports color?

Printing problems with HP laserJet 1320 and new Intel iMac

My new Intel iMac won't print to my HP 1320 from Eudora or from web browsers. The applications "quit unexpectedly". From Safari, nothing happens.
I can print PDF documents and Office documents with no problems. The Intel is connected to a router via Airport. The printer is connected to the router via Ethernet. My old G4 iMac prints fine (connected to router via Ethernet) as does my G4 laptop (connected via Airport).

A post from another threat that might help.
From Payson
Solution!!!
Just spent 90 minutes with some nice folks in level 1 and level 2 support.
Problem seems to be that I used migration utility to import the soul of my old machine into the new machine. When you do that, you bring along the old print system (PPC vs Intel).
I had upgraded to 10.4.5 after the migration and assumed that it would correct any problem like that, but it had not.
After a great deal of trial and error, the solution was to go to move disk/library/printers to the desktop and restart the system
Then use the the install disk 1 that came with the iMac and use the OPTIONAL INSTALLS package to reinstall the printer drivers.
Worked like a champ.
Suspect similar problem might happen for any of you with I/O drivers.

HP Laserjet 2200 and new JetDirect card and DHCP

We had to replace the JetDirect card in an HP laserjet 2200. As soon as that was done, the DHCP service will not give it an IP address in our network. It has an APIPA address 169,254.X.Y. The printer is in a distant branch office and so before I travel to the office I was hoping for hints on why this might have happened (and if anything can be done remotely). On the laserjet 2200, there is no LcD panel or display to alter settings, so we must use the web interface, which we cannot get to. Thanks in advance for anyone's thoughts.
Marty Franek

It appears this is for a commercial printer. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Brand new hp laserjet p1102 and new toner cartridge out of toner after less than 100 prints ! ! ! !

Similar Messages

Maybe you are looking for