Brand new internal HDD fails again and again after clean Mavericks install - disc utility from Recovery HD can't repair

My old internal (self installed) Seagate HDD broke down, and couldn't be fixed with disc utility (from install disc). I bought and installed a new hybrid Seagate HDD, and did several clean installs of Mavericks, but the problem keep occurring - on the new HDD, just as it did on the old one.
I can't run Hardware test. Happened both on 10.9.0 and 10.9.1.
Will try to repair with DiscWarrior later.

If both the HDD and the hybrid disk are failing, your problem may be the SATA cable in the main HD bay. You might want to search eBay for Apple part # 922-9751, or if you want a tested cable, pay the higher price from ifixit -> http://www.ifixit.com/Store/Mac/MacBook-Pro-15-Inch-Unibody-Early-2011-Late-2011 -Hard-Drive-Cable/IF161-086.
Worth a shot...
Clinton

Similar Messages

HDD fails again after restoring data from Time Machine?

Hello,
I will try to explain my case and end with a question that maybe someone will be able to answer (I hope..):
1. My imac started to run very slow and every 2 minutes or less appeared the coloured wheel for some secs. While the wheel was visible, the Os and all the apps running freezed.
2. Firstly I thought it was a software problem, but after some "testing" I started thinking on a hard drive failure or similar.
3. I did a disk verification whith the Disk Utility and it failed.
4. Panic!
5. I booted from the instalation DVD and tried to repair the hard drive with the Disk Utility.
6. Nothing..
7. I erased my HDD partition and created a new one.
8. I used the DVD to install again all the Os X.
9. After the installation all seemed ok. The HDD passed the verification and the spining coloured wheel appeared only when it should.
10. I restored my data, apps, etc from my Time Machine HDD using the Migration Assistent utility.
11. After the restore, the problems with the HDD reappeared.
Do you think Time Machine can store damaged files and after a restore make a healthy disk (only with the Os X installed) crash?
Has anyone experienced the same?
Thank you!

Sounds like the hard drive might be starting to fail.

Macbook pro running slow and jumpy after clean lion install

Did an upgrade to Lion. Macbook pro was really slow, tried disk repair and repairing permission as well as resetting the smc. No luck. Did a clean install of Lion, still jumpy though a bit faster. Again verified disk (didnt need repair) and repaired permission, as well as smc reset. Still no luck. Anyone have any ideas?

What do you mean, 'jumpy'? Also, has Spotlight stopped indexing? Check the magnifying class in the upper right corner and click on it. If it doesn't say it's indexing, then it completed that task. How much RAM do you have in your system?

I am running Mac OS X Lion on a brand new Mini. Every now and then, my keyboard goes "dead." The mouse still works but can't type. If I restart, everything is fine again. Is there anything that will fix this problem?

I am running Mac OS X Lion on a brand new Mini. Every now and then, my keyboard goes "dead." The mouse still works but I can't type. If I restart, everything is fine again. Is there anything that will fix this problem?
Also, I am trying to connect my Mini from the mini-Displayport to the Displayport of my Dell U2410 monitor. The image is very grainy,even though it is set to the correct resolution: 1920 X 1200 at 60Hz. If I use HDMI to VGA input, the image is much clearer. Is there a way to get the Displayport to work?

I'm having exactly the same keyboard issue. Certainly nothing has ever enhanced my concentration while coding like suddenly becoming unable to type.
I'm seeing a great many devicemgr and rake errors in my system log. I don't know if they're related. How 'bout you?
If you're unfamiliar with the system log…
Open /Applications/Utilities/Console.
If necessary, choose View > Show Log List.
system.log is at the top of the FILES section.
Try searching it for hot words like DEBUG, FATAL, and aborted.
I've found some discussions that would tend to indicate my errors are postGres related – I'm running OS X server.
-Bryan

How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

You should copy everything from your old comptuer to your new one.

MacBook Pro doesn't recognise new Internal HDD

Hi there, I was hoping to get some help on this ...
I purchased a WD Scorpio Blue 750GB internal HDD and Apricorn kit and used SuperDuper to clone my current internal HDD. The clone copy worked fine and I can boot the OS via the new WD HDD if it’s connected via USB, but when I install it inside, the Macbook doesn’t recognise it and a folder with a blinking ‘?’ appears.
I’ve tried booting up from the disk utility on start up to hopefully select it and that doesn’t work either as it cannot find the HDD.
I’ve tried booting up from disk utility and using my Time Machine back-ups to copy over the new WD HDD but it doesn’t recognise the new internal HDD either.
I did format it before I cloned the new drive to be OS Extended (Journaled) but I didn’t make multiple partitions and not sure if this is a step I'm missing.
When I put the old HDD back in it boots fine.
Any advice would be greatly appreciated
Cheers, Sam

Didn't matter how many times I reformatted, partitioned mapped the HDD when it was connected externally, the issue was was the Super Duper clone. (even though it would start up as an external start up disk.)
Had to install the new HDD internally and reformat it from boot up through Disk Utility then do a restore from a previous Time Machine back up.
Works fine now, no issues.

Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

Hi, I just put a new internal hard disk to my MacBook after formattimg it and I don't know how to install the OS X? Any help please

Be sure you have prepared the new drive correctly:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

Brand new computer is super slow and makes a clicking noise

My brand new computer is super slow and makes a clicking noise. Any suggestions? I have a lenovo X120e, purchased it around 2 months ago but due to moving across the country just started using it, not so happy so far but I would be happier if it would speed up a bit. Every click takes a while to register especially during browsing on the internet.

Can you run the ThinkVantage Toolbox's HDD diagnostics?
Alternatively, try HD Tune's error scan and check it's SMART page for warnings.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

HT1498 I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

I just bought Apple TV 2 weeks ago. I have a brand new Samsung LED TV. Everything works fine. I rented a movie from iTunes and it took 4 hours to download. My friend said this is wrong, his movies play instantly, so what's wrong?

If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

Both my HP D4360 and my HP 940C printers have brand-new HP cartridges in them and neither one print

Both my HP D4360 and my HP 940C printers have brand-new HP cartridges in them and neither one of them print correctly (half way). I made sure that the cartridges bleed out very well (on a damp paper towel until ink bleeds out) yet the characters come out very skipped, lined and in short, look terrible. Both printers should have been covered under the lawsuit against HP but I've yet to see a dime and I've been through more cartridges than I can count. With that said, I'm open to hearing any type of device short of thrilling the printer out the window of a 30 story building window because they both should work quite well. Any suggestions, ideas or what should I do next because I'm quite frustrated and the money doesn't grow on trees in my neighborhood or checking account. Thank you – Frustrated if for some reason, dedicated HP consumer for the past 16 years…Frustrated yet still dedicated HP consumer – Help

Hi-
You might take a look at the following video. Drives and memory are user installable parts. (G4 model selected at random):
http://www.info.apple.com/usen/cip/html/g4ge/g4gbenet-dvddrive-cip.mov.html
http://www.info.apple.com/usen/cip/html/g4ge/g4gbenet-memory-cip.mov.html
Use the pull down menu to select your model:
http://www.apple.com/support/diy/
RAM and Optical drives are available here:
http://eshop.macsales.com/shop/memory/
http://eshop.macsales.com/shop/optical-drives/superdrives/powermac/
Stick with a Pioneer Optical Drive. You will get the best service life, as well as best native compatibility.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

I have brand new ip5 in the box and never touch it so Can i exchange my ip5 to ip5s with the same prize

I have brand new ip5 in the box and never touch it so Can i exchange my ip5 to ip5s with the same prize

Consult the store from which you bought it for their return policy.
Best of luck.

Implementing 2 Badis for adding new internal follow-up actions and saving

Hi Guys
I would like assistance with the implementations of two badis in EMW. The one badi is called /SCWM/IF_EX_QFU and is used for adding new internal follow-up actions and the second badi is called /SCWM/EX_QFU_SAVE and is used for saving the new follow-up actions that that have been created.
Regards
Maud

Hi Guys
I would like assistance with the implementations of two badis in EMW. The one badi is called /SCWM/IF_EX_QFU and is used for adding new internal follow-up actions and the second badi is called /SCWM/EX_QFU_SAVE and is used for saving the new follow-up actions that that have been created.
Regards
Maud

I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

mcbsousa wrote:
hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
Sending by Dropbox where, To who, to what computer? As your does not start up.
You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

My (brand new) imac with flash hard drive freezes after mavericks update

after updating to the new mavericks my new imac has been slowed down -
when scrolling in finder to select files and tag them it freezes and "thinks" after each file
your help appreciated
its brand new ( only a month old ) and was lightning fast before

after updating to the new mavericks my new imac has been slowed down -
when scrolling in finder to select files and tag them it freezes and "thinks" after each file
your help appreciated
its brand new ( only a month old ) and was lightning fast before

Brand new internal HDD fails again and again after clean Mavericks install - disc utility from Recovery HD can't repair

Similar Messages

Maybe you are looking for