BRAZIL LOCATION - Table T012C - View V_T012C - Field " VORGA"

Dear
I used to mantain the Field "VORGA" in a View V_T012C . However I,d like to know about de information that I have to create in this field. I have to fill 4 caracters in this Field.For example in that enviroment that I work for I have the caracters ;" 1111" but a I don,t what is the information about this numbers. I Know that the numbers , run information in electronic folder that we have to send to the Bank. If somebody know about this information please retirn this question.
Beste Regards

Hi dear Alexandre,
This field is maintained by OBBA and OBBB transactions code. It contains 4 positions that fills collumns 58 to 62, in "P" segment of FEBRABAN layout.
1° position: Purse code (Código da Carteira).
Numbers:
1 - Single Collection (Cobrança Simples);
2 - Linked Collection (Cobrança Vinculada);
3 - Bail Collection (Cobrança caucionada);
4 - Descount Collection (Cobrança descontada).
2° position: Bank cadastre type (Forma de cadastramento do Banco).
Numbers:
1 - With registre;
2 - Without registre.
3° position: "Bloqueto" sending (Emissão do Bloqueto).
Numbers:
1 - Issued by Bank;
2 - Issued by customer;
3 - Issued by Bank and customer;
4 - Bank send second time;
5 - Bank not second time;
6 - Collection without papers.
4° position: Bank Distribution.
Numbers:
1 - Distribution by Bank;
2 - Distribution by customer.
ITAU Layout uses only "09" or "19". In this case you have check calling to Bank.
Let me know if this help you.
"Abração!"

Similar Messages

Using an event in table maintenance view to populate a field

I have a table maintenance view, and I would like to populate one field of the table with derived data. I am trying to do this by coding a routine for one of the events, but so far no luck. I have been able to chege the data in the TOTAL table, but still it does not populate the field on the screen.
Note this is not for one row as it is entered, but I want all rows of the table displayed to show this field with derived data.
So the question is: what is the correct event to use, and what is the correct internal table to update? Can I make changes to EXTRACT or TOTAL to do this?
Kind Regards,
Tony.

Hi Rob,
Sorry for being lazy; I'll close this and off and search :-}
BR,
Tony.

How to hide a field from table maintenance view?

Hi,
How to hide a field from table maintenance view?
The field is used for data created date. I need to hide it from display.
Thanks

Chk this link.
http://help.sap.com/saphelp_nw04/helpdata/en/66/33f52010dd11d6999300508b5d5211/frameset.htm
Maintenance Attributes
You can assign a maintenance attribute P to individual fields in the maintenance view definition in the Dictionary (SE11). It can be H (hidden)
H (hidden)
A field flagged H is not displayed on the screen. This field must also be filled in the background by a routine at an event.
The system writes R and H fields to the database like all other fields when a new data record is saved.

How to handle ORA-00942: table or view does not exist

Hii All,
I'm trying to drop a table dynamically irrespective of its existence in a procedure. Its working fine when table exists but when table doesn't exist I'm facing following error
ORA-00942: table or view does not existI made use of pragma exception_init and modified my code as below
Create or replace Procedure sp_FSASA_FEEDUPLOAD_process
           p_test_dir               in     varchar2,
           p_feed_file_name     in     varchar2
is
          l_exttable_str varchar2(32000) ;
          l_log_file constant varchar2(200) := 'logfile_rgh.log';
          l_table_doesnt_exist Exception;
          pragma exception_init(l_table_doesnt_exist,-00492);
Begin
          Begin
               execute immediate 'drop table FSASA_FEEDUPLOAD_EXT purge' ;
          Exception
                    when l_table_doesnt_exist then
                         null;
          End;
          l_exttable_str := 'Create table FSASA_FEEDUPLOAD_EXT ';
          l_exttable_str := l_exttable_str||' ( ';
          l_exttable_str := l_exttable_str||' Category_No                    varchar2(1), ';
          l_exttable_str := l_exttable_str||' Financial_Category          varchar2(300), ';
          l_exttable_str := l_exttable_str||' GFCID                         number, ';
          l_exttable_str := l_exttable_str||' Balance                         number(34,14), ';
          l_exttable_str := l_exttable_str||' Refernce_no                    varchar2(20), ';
          l_exttable_str := l_exttable_str||' Account_no                    varchar2(20), ';
          l_exttable_str := l_exttable_str||' ce_trans_id                    varchar2(20) ';
          l_exttable_str := l_exttable_str||' ) ';
          l_exttable_str := l_exttable_str||' Organization external ';
          l_exttable_str := l_exttable_str||' ( ';
          l_exttable_str := l_exttable_str||' type                    oracle_loader ';
          l_exttable_str := l_exttable_str||' default directory      '||p_test_dir;
          l_exttable_str := l_exttable_str||' Access parameters ';
          l_exttable_str := l_exttable_str||' ( ';
          l_exttable_str := l_exttable_str||' records delimited by newline ';
          l_exttable_str := l_exttable_str||'BADFILE '||q'[']'||p_test_dir||q'[']'||':'||q'[']'||'feed.bad '||q'[']' ;
          l_exttable_str := l_exttable_str||'LOGFILE '||q'[']'||p_test_dir||q'[']'||':'||q'[']'||':feed.log '||q'[']' ;
          l_exttable_str := l_exttable_str||q'[FIELDS TERMINATED BY X'09']';
          l_exttable_str := l_exttable_str||' missing field values are null ';
          l_exttable_str := l_exttable_str||')location('||q'[']'||p_feed_file_name||q'[']';
          l_exttable_str := l_exttable_str||')' ;
          l_exttable_str := l_exttable_str||' )Reject limit unlimited ';
          dbg_print(l_log_file,'l_exttable_str : '||l_exttable_str);
          execute immediate l_exttable_str;
End;But still I'm unable to get rid of it. Pls help me.
1)I need to drop it as I need to immediately create table with different file name and from different path.
2)The last thing I don't like to do is to check the table name in USER_OBJECTS and then drop.
3)Also suggest me whether creating an external table dynamically is correct approach or not.
4)Till now we were using utl_file for reading feed file but I'm much interested in using EXTERNAL TABLE concept.
5)As the filename and path gets changed I need to create my external table at runtime.
please suggest me whether I can alter my filename and path at runtime

You will need to use WHEN OTHERS EXCEPTION handler which is not a good idea to do so if you dont handle the same approprialtly then the exception would go un-noticed:
SQL> ed
Wrote file afiedt.buf
1 begin
2 execute immediate 'drop table my_Test';
3 exception
4 when others then
5 dbms_output.put_line(SQLCODE||SQLERRM);
6* end;
SQL> /
-942ORA-00942: table or view does not exist
PL/SQL procedure successfully completed.
SQL>

Groupings - Form on a table or view

Hi
I have a view eg. field_a, field_b, field_c, field_d, field_e, field_f.
I have selected all these columns when creating a page (Form on a table or view).
However I would only be displaying field_d, field_e, field_f. I have selected field_a,field_b and field_c as I require these fields so that I can use them to join to a previous page which is an interactive report. I now need to group by field_a, field_b, field_c.
Is this possible?
Regds

Hello,
You should solve it in your view. Define the GROUP BY in there. Of course you can't update the values in the Forms when using a GROUP by function...
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Cancel button on form of type form on a table or view

I am a newbie for apex. I am using 10g. I have created form on table emp(empno , name , salary ) . Form is of type Form on a Table or View.
Cancel & Save(Apply changes) button are not working at all. so I copied process reset page and execute on condition save button click. But still cancel button is not working. applcation has some other forms of type Form with a Report and are working properly. I have wasted 2 days on this problem.

Hi,
You can do that. If you have the branch to in the same form what you have to do use clear cache for that page. Click on the edit page, click on the cancel button in the left button section. scroll down to bottom and type the page 32 in the Clear cache field. However it is better to have branch to the report page (different page from the form).
Hope this will help.
M Tajuddin
http://tajuddin.whitepagesbd.com

Aotu numbering in table maintenance view

Hi experts,
Can anybody help me in auto genereating serial number in table maintenance view. I have created table maintanance view for a z table for which first field is serial no. The requirement is this serial number should be auto genereted. increment by 1. I have writeen the code for the same in PAI event, but it getting incremented by number of rows. e.g for secind row counter is incremented by +2. for thrid row it is +3 and so on....
plz help to achieve consistency .
Thnks n regards,
Ashmita Singh

What happens if the user deletes a recird from the table?
Suhas,
Happy New Year
Disable delete function and provide a deletion indicator. This should be fine right.
The problem would be when the maintenance dialog is regenerated.
@OP - So as suggesgted use events.
Similar threads were discussed before many times. May be you culd search it once.

Problem in Table maintenance view

Hi all,
i am getting some problem in table maintenance view.
In my table i have some fields and when i created my table maintenance view , it is created , but when i try to see it in SM30 its not showing my fields and even i am unable to create a new entry. when i click
new entries its going back to the sm30 screen..
How to go abt it
please help me

Hello,
Have you created the table maintanence view the right way.
You can get good help from below link: [[http://www.****************/Tutorials/ABAP/TableMaintenance/demo.htm]]
Also, please check the Delivery Class and Data Browser/Table View Maint. in the Delivery and Maintanence tab of the table.
Thanks,
Jayant
Edited by: Jayant Sahu on Nov 24, 2008 3:00 PM

Reg :-maintain a table maintenance view for the z table.suggest me the code

i have question.i have created a z table related to pp module.the requirement is to maintain {table maintenance view} for this z table.how could this be done.can any one suggest me the code for this?

Hi ,
We have a lots of queries on table maintainance creation in the forum posted and replied to.Pls have a look at it first.
In se11 -> change mode of the ztable -> goto -> utilities -> table maintainance generator -> click on it...
it will give a new screen-> enter the required details like function group , authorisation(use &NC& or leave it blank if you dont know) and screens
2 step and 1 step means=> number of screens displayed in maintainace
if step1 is selected then we have a screen which will be like a table control for data entry.........
for step2 we have a table control screen and a more detailed individual field display as second screen
click on the button 'find screen numbers' so that system automatically proposes the screen numbers
after which click on the "create" button and follow the required instructions/messages
once done go to SM30 enter the table name to check if maintainance has been created properly
Hope it helps,Pls check and revert
Regards
Byju

Table maintenance view - tcode

Hi experts,
We have a tcode (already in production) created for table maintenace view of z-table.
Everything is working fine.
Now I added one new field to the z-table and changed the table maintenance view accordingly. In SM30 I can maintain the table without difficulties - the new field is visible and maintenable. However, when I call the transaction code created for this view, it doesn't have the new field yet. I tried a lot but without success to update the tcode accordingly.
How can I get the tcode adjusted with the new field?
Thanks for your advise and help in advance!
Your feedback will be << appreciated >>.
Regards,
Sally
Please do not offer rewards.
Edited by: Rob Burbank on Dec 6, 2009 5:22 PM

It's about one week you asked the question, but I answer in case you didn't understand what happened:
First, screens 1000-1010 can't be used in a table maintenance dialog (an error is mentioned by SAP when you try to use these numbers). So, I really don't understand how you can get 1000 in your table view!
So, I think that your transaction is linked to a custom program (not the SM30 view). So you just need to adapt manually the custom program. Note: maybe the program is a partial copy of the SM30 function group, so maybe you may just copy the dynpro 1000 of the SM30 function group to the dynpro 1001 of your custom program...
Note: when you want to create a transaction which is linked to a table maintenance view (SM30), you must define a Z* transaction of type parameter, with reference to SM30 transaction, select "skip initial screen", do not choose any dynpro, and choose VIEWNAME = your view and UPDATE = X as parameter values.

Table Maintenance & View Clusters

Hi,
I am trying to generate table maintenance views and group them using a view cluster. The following is what I have done so far.
I created 2 tables. TAB_A is the primary table with TAB_B the description by language table. They are not linked to each other in any way (even though they probably should).
TAB_A - FLD_A (key, char2)
              FLD_B (date)
              FLD_C (time)
              FLD_D (fltp16)
TAB_B - FLD_E (key, char2, same type as FLD_A)
              FLD_F (key, char3, language field)
              FLD_G (char50)
              FLD_H (date)
              FLD_I (time)
              FLD_J (fltp16)
I then created 2 maintenance views based on the tables above.
VIEW_A - FLD_A
          FLD_B (hidden)
          FLD_C (hidden)
          FLD_D (hidden)
VIEW_B - FLD_E
          FLD_F (hidden)
          FLD_G
          FLD_H (hidden)
          FLD_I (hidden)
          FLD_J (hidden)
I've then used the table maintenance generator to create the screens as well as the unique events to populate the hidden fields.
Using SE54, I've created a view cluster. I have added both of my views to the view cluster as follows:
View/table       TAB_A          TAB_B
Predecess.       TAB_A          TAB_B
Dep              R              R
Pos              1              2
Start            true
I have clicked the field-dependence button and generated the dependencies successfully.
So far everything is okay.
I now need to change the hierarchy in the cluster, so that TAB_B is dependent on TAB_A.
What I have tried so far is to add a foriegn key to TAB_B (this worked but is not an ideal solution).
I also changed the dependency type in the cluster to 'S' (only worked in conjunction with FK)
The documentation indicates that what I am trying to do is possible, but I'm not sure how.
So do any of you bright people out there have any ideas?
Be gentle I'm new to both the forum and SAP in general (hence being given table maintenance).
Kind regards
Chris

In my experience, cluster maintenance view Table 1 keys where always used as foreign keys in Table 2. Then these common fields were used in dependencies and subset.
- Creation of maintenance view on table 1
- Then generation of maintenance dialog on Table 1
- Creation of maintenance view on table 2 defining the keys of Table 1 as subset fields (test the dialog, a popup should appear with the subset fields)
- Then generation of maintenance dialog on Table 2
- Creation of the cluster generating the dependency between Table 1 and itself (without specifying any field) and between Table 1 and table 2 using the subset fields (should work automatically)
Look also at [Create a View Cluster|http://help.sap.com/saphelp_nw04/helpdata/en/d0/999249b2aa11d1a5700000e82deaaa/frameset.htm]
Regards

Table maintenance view problem

Hi. I'm trying to generate a table maintenance view for a custom table, and I keep getting an error message. I go into the table maintenance view generator and fill out the fields. I'm selecting a function group that has ZHR0 as the development class (which is correct). Then when I click on the create button a screen pops up with the workbench request number. When I click on the continue button, I get the following error message: "The maintenance object description has no transportable class." If I click for more information, this is what it says to do: "Either assign the maintenance object description for object ZTS_ADJST_REAS to acorrectable development class, or assign the table forthe generation of the maintenance module to a function group with non-correctable development classes." Apparently the maintenance object description somehow got assigned to temporary class $TMP. Where do I go to change this?
Thanks,
April King

Hi April,
You can use standard program RSWBO052 to change the package. Enter the object and mark the checkbox -> Execute -> Place the cursor in the object -> Right click mouse -> Reassign -> Enter new package -> Save.
or you can go to transaction SE80 -> Select Package -> Enter &TMP -> Hit Enter -> Find your object -> put the cursor and right click -> Other functions -> Object Directory Entry -> Change -> Change the package -> Save.
Hope this will help.
Regards,
Ferry Lianto
Please reward point if helpful.

Table Maintenance View Generator - 46C to 60 compatibility

Table Maintenance View Generator - 46C to 60 compatibility
I think SAP changed the way it generated its View Maintenance Screens some time after release 46C such that view maintenance dialogs in 46C are maintainable in subsequent releases but that view dialogs created in subsequent releases are not compatible in 46C. This is my hypothesis.
Can someone confirm? Is there a way to revert 60 code to the way the dialog was generated in 46C?
The error in the transport log from a 60 system to a 46C system is:
"Field '<VIM_TOTAL_STRUC>' is unknown. It is neither in one of the specified"

Hi April,
You can use standard program RSWBO052 to change the package. Enter the object and mark the checkbox -> Execute -> Place the cursor in the object -> Right click mouse -> Reassign -> Enter new package -> Save.
or you can go to transaction SE80 -> Select Package -> Enter &TMP -> Hit Enter -> Find your object -> put the cursor and right click -> Other functions -> Object Directory Entry -> Change -> Change the package -> Save.
Hope this will help.
Regards,
Ferry Lianto
Please reward point if helpful.

Problem with af:table and view links

I want to display a table with data from a database table called PERSON, so I'm using af:table tag.
The PERSON table has the next fields:
PERSON_CODE
PERSON_NAME
PERSON_COD_STATE
The field PERSON_STATE is a foreign key to other table called PERSON_STATE:
PERSON_COD_STATE
DESCRIPTION
I've created a view to get data from PERSON table (personView). Because I want to show the person state description in the af:table , I've created another view to get data from PERSON_STATE table (personStateView). And I've also created a view link between personView and personStateView.
In the column of the af:table that represents the person state I drop the field 'description' of the state view linked to the person view.
When I run the JSP the state is not shown properly. All the persons are shown with the same state.
When testing directly with the application module, the view link works properly.
Does view links work inside a af:table?
I'm working with ADF 10g.
Thanks

Thanks for your reply.
The second alternative works, but I would be interested in the first one (using a view link).
The foreign key is defined properly:
PERSON.PERSON_CODE is a primary key.
PERSON.PERSON_COD_STATE is a foreign key.
PERSON_STATE.PERSON_COD_STATE is a primary key.
I have created a view link based on that foreign key.
When usign af:table to show the records of PERSON table, all the data of PersonView is properly shown. But the STATE of the person is not ok. It seems as the view link is not working.
Why?
Thanks

Error while deploying map: ORA-00942 Table or view does not exist

Hi OWB experts,
I'm having yet another problem with OWB, this time when I try to deploy a mapping I get this error:
ORA-06550: line 59, column 3:
PL/SQL: ORA-00942: table or view does not exist
DIM_01_ESTCON_MAP
ORA-06550: line 93, column 3:
PL/SQL: SQL Statement ignored
If I open the package that OWB created I see the errors:
CURSOR "DEDUP_SRC_0_IN2_c" IS
SELECT
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_ID" "ESTADOCONEXION_ID",
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_COD_ESTCON" "ESTADOCONEXION_COD_ESTCON",
"DEDUP_INPUT_SUBQUERY2$1"."ESTADOCONEXION_DESC_ESTCON" "ESTADOCONEXION_DESC_ESTCON",
"DEDUP_INPUT_SUBQUERY2$1"."STANDARD_TOTAL_COD_TTL" "STANDARD_TOTAL_COD_TTL"
FROM
(SELECT
DISTINCT
"DIM_01_ESTCON_MAP"."GET_CONST_CA_0_ESTADOCO" "ESTADOCONEXION_ID",
"ESTADOS"."ESTADO" "ESTADOCONEXION_COD_ESTCON",
"ESTADOS"."DESC_EST" "ESTADOCONEXION_DESC_ESTCON",
"DIM_01_ESTCON_MAP"."GET_TOTAL_C_0_TTLID" "STANDARD_TOTAL_COD_TTL"
FROM
"CONSULTA"."ESTADOS"@"PROD@AYADEV_LOCATION" "ESTADOS"
WHERE
( estado LIKE 'EC%' )) "DEDUP_INPUT_SUBQUERY2$1";
Where AYADEV_LOCATION points to the module/schema/location where my source data is.
Now, I have defined three modules:
SOURCE, where I defined the tables and other objects from the original database (source data)
STAGE, where I am performing all the transformations; here I defined all the maps
TARGET, this holds the dimensions and fact tables.
Now all three modules point to different databases. The dblink for AYADEV_LOCATION has been created and shouldn't present any problems. The username that I'm using to log on to the source database is current and I can connect to it through SQL+ or any other program (TOAD, SQLDeveloper).
What could be happening here? I'm using OWB 10g R2, with Oracle DB 10g R2.
I'd really appreciate any help you could provide.
Best Regards,
--Osvaldo
[osantos]

Hi,
I'm still having problems but I found out why these tables are returning errors. The username I've been given by the DBA to connect to the database is CONSULTA, but this user is only for querying purposes, the actual objects reside on a differente schema, of course, which is PROD. So the line:
"CONSULTA"."ESTADOS"@"PROD@AYADEV_LOCATION" "ESTADOS"
raises an exception because the table ESTADOS is not located on that schema, but on PROD. If I query the table from SQL Plus with:
SELECT *
FROM [email protected]@AYADEV_LOCATION
then there's no problem at all.
Why is this? How do I instruct OWB to point to the correct schema or to avoind fully qualifying the table name?
Please help me, I'm kind of confused here.
Best Regards,
--oswaldo.
[osantos]

BRAZIL LOCATION - Table T012C - View V_T012C - Field " VORGA"

Similar Messages

Maybe you are looking for