Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks to anyone who can help!!
Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks!!
That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.
Similar Messages
-
Okay I use iPhoto 6 on an older mac and don't want to upgrade past 10.4.11. Can I upgrade iPhoto without the newer operating system? For the life of me I can't get iPhoto to recognize my camera reliably - although it does sometimes. Any advice, help?
The latest version of iPhoto which can operation with OS X 10.4.11 is iPhoto 7 which is part of iLife 08. You might be able to find a copy of iLIfe 08 on Amazon.com or Ebay.com.
iLife 08's full system requirements are:
Mac computer with an Intel, PowerPC G5, or PowerPC G4 processor
iMovie ’08 requires a Mac computer with an Intel processor, a Power Mac G5 (dual 2.0 GHz or faster), or an iMac G5 (1.9 GHz or faster)
iDVD ’08 requires 733MHz or faster processor
512 MB of RAM; 1 GB recommended; high-definition video requires at least 1 GB of RAM
3 GB of available disk space
DVD drive required for installation
From: http://support.apple.com/kb/HT1010
OT -
I have purchased a book and it went (accidently) to my PC. How do I get it from PC to iphone 5? the book now has an "epub" extension. Thanks for anyone who can answer! Frustrated !!!
I'll assume that you are referring to purchasing a book in iTunes. If that is the case, you can transfer the purchase with the phone, or you can sync the phone and iTunes.
-
After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.
You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel -
I realize I might be one of the last first-time buyers of an iPod Touch (latest version) but I cannot find the PODCAST APP for it anywhere! After wasting a total of an hour on 4 separate occasions today, I've given up, thinking perhaps I AM the last person who would need this app & it's 'retired'. Even typing in PODCAST APP & hitting the magnifier 10X's did NOTHING but hurt my finger tip. Could some nice person please help CONFUSED & CRAZED in CONNECTICUT? Thank you in advance! Oh, one more question- How does 'one' get their older iPod players like the BOSE & 2 other good ones I have, WITH the Bluetooth music receivers I bought already on them, to actually DO what its designed to? Now add clueless, to my previous sign-off & not BORN in 1995! But, hey, I'm trying! ; )
You can connect the iPod to a computer and download the Podcast app using iTunes > https://itunes.apple.com/us/app/podcasts/id525463029?mt=8
Or, on your iPod, tap the App Store then type in Podcast then download the app. (It has the same purple icon as the one at the iTunes Store on a computer).
Only iPods with Bluetooth capability can, "pair" with Bluetooth BOSE devices.
On an iPod touch, tap Settings > Bluetooth. -
How do I get computer to recognize my older ipod touch so I can Import photos?
I can't get my computer to recognize my ipod touch older model so I can import photos.
Do new model iPod connect? If not see:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If they do then does the iPod work?
Does it charge?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic. -
The photos must be viewed in sequence as prepared with the filenames I have chosen to describe them.
How can I just simply transfer this over to a dvd ? Any help is appreciated !
Thank YouThere are two ways to export photos so they remain in the same order as you put them in the iPhoto album:
A:
1 - select the photos in the album and use the Photos ➙ Batch Rename ➙ Title to Text menu with the option to add a sequential number to the file name.
2 - Export out of iPhoto via File ➙ Export ➙ File Export with the option File Name = Title.
B:
1 - select all of the photos in the album and export via File ➙ Export ➙ File Export with the option File Name = Album name with number.
Both method will produce file with the following file name format: xxxx-01.jpg, xxxx-02.jpg, etc., which will be in the order you had in iPhoto when view alphanumerically in the Finder.
OT -
How do I get iTunes to recognize my new iPhone 4S so I can sync my music?
I need help with syncing my music to my iPhone
Hi Friend,
if iTunes cannot find your device, go to Edit>>Preferences>>Devices and unmark "Block your devices automatically sync", then I hope iTunes can find your device. -
Can't get imovie to recognize my camera: Panasonic SDR-H60P
Had no problems with imovie recognizing the last camera.
Videos I shot are showing in .MOD AND .MOI format which I am not familiar with.
Plugging the camera into my USB port in my IMAC and it keeps showing no camera connected.
Any suggestions?system profiler- yes recognizes camera
FCE- easy set-up is HDV-AIC 1080i60
FCE- version 3.51
System X.4.11
Computer- imac 2.16ghz intell core 2 duo
memory- 1 GB
Drive- 100plus gb on hard drive left
connecting HV-30 with fire wire, 4 pin to 6 pin fire wire
media settings- not sure?
Let me know if you need anything else. Thanks. -
I can not get ADE to recognize my KOBO
I am trying to activate my kobo, and I can't get ADE to do anything. I plug in my KOBO, launch ADE, and nothing happens. I read that ADE is supposed to recognize it automatically, but it doesn't. Absolutely nothing happens. How do I get it to recognize it?
Thank you,
-M-I don't mean to be patronizing, but the instructions to activate the
ereader 'should' be in the box with it. If you don't have instructions or
some form of User Guide, you could go online and try to contact Kobo's
Customer Service or Help functions.... When you do the activation, you
should get updated software if there is any, because the Kobo website will
be interfacing with your ereader. It will put a small file on the ereader
that contains information that ADE will use to authorize it so you can do
the ebook transfers.
Sorry I can't be more helpful.
========= -
How can I get iMovie to recognize the external camera?
iMAC running OSX 10.6.8 recognizes external HD Camera hardware, but iMovie fails to recognize the device. I can copy files "manually" using Finder, but cannot import them directly into iMovie. How can I get iMovie to recognize the camera? I have already re-booted all devices and tried multiple USB ports. In all cases the OS recognizes the camera, but iMovie does not.
OK This camcorder is a fine camcorder. I have an earlier model of a similar camcorder from Panasonic. However, this newer model has one problem. It is not compatible with iMovie if you shoot at the highest quality mode, (which is 60P or 50P - which might be called 28MBPS mode). If you shoot 30P or 30i (even 60i) it will import to iMovie. Also, iMovie can handle 1280x720P60 and P50.
It will definitely work on iMovie 11. It should probably work on iMovie 09. I doubt this camera will be recognized at all on iMovie 08, but it is worth a try. To see which iMovie you have, click iMovie/About and check the version. 9.04 would be iMovie 11. (9.08 is the current version, but it will not run on OSX 10.6.8). 8.06 would be iMovie 09. 7.1.4 would be iMovie 08.
OK So how to work around this limitation?
1) If you have Final Cut Pro X ($300) or can justify buying it, it will import 60P and 50P from this camera. However, if this seems a little pricey to you, keep reading.
2) If you set your camera to record in 1080P30 and shoot a short clip, then iMovie should see the camera. Then I would suggest using iMovie import screen to create a CAMERA ARCHIVE of your camera. This will copy to your Mac the entire contents of the video files on your camera. You will need them later. I am assuming you have some valuable footage on the camera that you would like to have.
3) Going forward, the simplest thing is to shoot in 1920x1080P30 and use iMovie normally. The biggest advantage of P60 or P50 is when you need really high quality slow motion effects. In other words, after you edit your movie, everything is converted to P30 or P25 anyway.
4) If you want to retrieve the 1080P50 or 1080P60 clips that you have shot, then there are a couple of apps you can buy to convert them to a form that iMovie can edit. Two such apps are ClipWrap and Voltaic HD. There are also various free apps, but I cannot vouch for them. Do a search on google and you may find some that work. -
How can I get Skype to recognize camera on MacBook Air?
How can I get Skype to recognize the camera on my MacBook Air? It recognized it until last week. (Is Apple working 24/7 to fix this irritating problem?)
See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
From Apple:
MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
update resolution coming soon -
I think I may have a Camera Raw plug-in conflict or plug in may be in the wrong place. In both PS3 and Bridge Nikon raw files (NEF) will not open. I've noticed that in photoshop in the pull down menu-about plug-in, I have 2 Camera Raw (s) listed, getting info one is 4.0, the other 4.6.0.30. It appears that my files and .xmp are 4.0 just by searching for 'Camera Raw' either 4. or 4.6 in spotlight. nothing is listed in spotlight under camera raw 4.6, but all my images are listed in the spotlight if I search for camera raw 4.0! I can not open either in Bridge or Photoshop CS3 I just receive the error message 'could not complete this request because photoshop does not reconize this type of file'. any help would this is greatfully appreciated. Thanks
Well if you have a fairly new Nikon camera PS CS3 will not have the proper version of ACR to support that camera.
You could use the Adobe DNG converter to convert the NEF files to DNGs or you can update PS to a newer version that does have support for newer cameras or you could buy Adobe Lightroom V4 which also has support for the newer Nikon cameras. -
Can't seem to talk to anyone who can actually help me!
I have been trying to get legitimate assistance for my high speed Internet that went down yesterday right in the middle of a final I was taking for school. However after hours of tech support trouble shooting and being hung up on to the hour plus I waited on hold today, I have yet to speak with anyone who can tell me why nobody seems to care about my lack of a connection. I was told the issue is not with my house and is a Verizon field issue but nobody is available to fix this. How is that possible?! It is absurd that I am on day 2 of no Internet when I work from home and go to school online. The amount of data I am using just to post this message is probably absurd. I really need to speak with some sort of management and can't understand why this is such a problem. Can someone please give me a number or email address to someone who can actually help me?!
If you are having an issue with your Verizon service, you can use the Verizon Troubleshooter to fix and report issues with your Verizon Phone, FiOS TV, or Internet Service, as well as to schedule a repair, here is the link:
http://www.verizon.com/repair
You can find tools on the Verizon Residential Support page that may help you diagnose your issue:
http://www22.verizon.com/residentialhelp -
I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!
Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks
Maybe you are looking for
-
Icloud Locked iphone
-
[PROBLEM SOLVED] After last update, Can't use keyboard in Xorg
Apparently the last system upgrade installed "xf86-input-keyboard-1.3.2-1-i686" but I reverted back to "xf86-input-keyboard-1.3.1-1-i686" and everything is working again. Lesson learned: put all xorg related packages to hold because my geforce2 mx440
-
Hi all, new to this and can't figure out how to download my live music dvds so I can hear the music on my ipod. Any help greatly appreciated. Thanks!
-
Hello, PTSpy is displaying this info: Opening and querying for object with Id: 2840 and Class Id: 256 Any idea how I find this in the db - no sql is shown, and this info keep showing over and over. Trying to figure out what is being queried over and
-
Is there any option for auto increment the values in the tables. for example if we are inserting 100 data's for first data i should specify 1 and for second data it should specify 2 and goes on.