Broken "Search Help" link

I just tried clicking on the "Search Help" link at http://www.oracle.com/ultrasearch/wwws_otn/searchotn.jsp, but the following error message appeared:
Sorry, this page was not found (Error Document 404)Could somebody please patch this broken link? Thank you.
-- DekuDeku

All you need to know about On2:
http://en.wikipedia.org/wiki/On2_Technologies
Google On2 for more links.
Oh, and it's for Windows.
I followed the links and got to the On2 site. It seems that this is the basis for Flash.
I clicked on the movie on their site and it played OK. I assume it is a Flash file as a control click gave the option of the Flash settings.
Therefore, the file may yet be playable in Flash or by enabling QT to play Flash in the preferences.....or something......or other.
Another one to try might be to convert to something else using VisualHub. It can export to Flash so maybe it can read from it.....worth a try. A demo version is free and the full version cheap.

Similar Messages

Creating a new Search Help on a standard SAP table field?

Good day, everyone!
As part of a report I am writing, the customer would like to have Search Help added to the AUFEX field in table AUFK. They would like this functionality so that when they are changing an order via t-code ko02, they can get a list of valid values to put in field AUFEX. I would like to tie it to a zTable I've created; in my zTable, I have just 2 fields: a key value (that will go into AUFEX) and a text description of the key value. This zTable is used in my report.
While I've created a Search Help on this table already for table maintenance, I've never added a custom Search Help to an existing standard SAP table field before. I've done some Googling and other searching to see what I need to know, but I've only been able to find information on Collective Search Helps. AUFEX doesn't yet have a Search Help field, so I don't think Collective Search Helps is my answer.
Is this possible? Can I add a custom Search Help to a standard SAP table field that doesn't have any Search Help linked to it yet? Is there an existing thread or guide somewhere that can tell me how to do this?
Thank you!

Hi
Yes u can: u can assign the search help to (A) data element livel or (B) field table livel.
After creating your search help:
A) Run SE11, insert your data element (AUFEX), press edit and insert the search help in "Search Help" area on DEFINATION tab;
B) Run SE11, insert your table (AUFK), press edit, place the cursor on your field (AUFEX) and go to GoTo->Search help->for field
But u should consider it'll mean to change a standard object for both cases: so u need to get the access key from your OSS.
Max

Using search help

Hi all ,
I created a elementary search help (Z_search_help) for the Ztable1 .
My table is Z_table1 , which has 2 fields mandt, name . The table has some contents .
when i gone thru the prog , i found there is no search help for field "name" after creating the search help also .
if i press f4 there is no input help .
my code :
parameters : name type ztable1-name .
at selection-screen on value-request for name.
after executing if i press f4 there is no input help.

yes my table is active .
i just see that when i go my table ztable1 and EXTRAS-->SEARCH HELP FOR TABLE
then i see there is no search help linke defined for ztable1 .
but if i go to the se11->search help and give the search help name
and execute it ..... then i am able to see the contents entered in the ztable1 .
In selection method i gave ztable1 .
but i dont know why search help is not working in prog.

Material Search Help for VA01 - Material by Plant

Hi Experts,
I want to know how to find out the search help for that material in that tcode. Please tell me in detail how to proceed with this and where to go with the modifications or enhancement.
I am not familiar with user exits, so please help me.
Regards,
Bhaskar.

Hi,
you don't need any exit / badi.
Go in VA02, in material number go in technical information : F1 ; F9
You will show there is no search-help link to the field. So the search-help is taken from the data element.
Go in SE11 and show the data element MATNR.
In the thirth tab you will find the search-help link : S_MAT1.
Go in SE11 and show the search help S_MAT1 (each time you could double click instead of reopen SE11).
This is a group search, that means, it contains many search help.
Copy a simple search help, modify as you would like.
Add your own search help in the S_MAT1, and don't forget to link fields (parameters).
You don't need any object key or user-exit.
You will affect all the screen of SAP using this search-help S_MAT1.
Regards
Frédéric

Problem with Help Link in search result screen of PCUI

Hi,
I am trying to access the pcui applications that came out of box with crm using BAB,everthing is working fine but got a problem with "Help" link in top right (beside personalize link) the search result area of all the PCUI screens.
when i click on that i get "page cannot be displayed" error, seems that it is pointing to some wrong URL, where should i change the url to point to our company's help site for that link..
clicking on the properties of that link shows that it is pointing to
javascript:CATshowF1(%20'/sap/bc/bsp/sap/crm_bsp_f1_help/f1help.do?doctype=kw&loio=70B4ED8E03595645A6ABA33B4576BB57&class=IWB_EXTHLP&language=E' );
Please help me in this regard.
Thank you

My response help resolve Kodru's Message which he also posted in EP Implementation Forum. He resolved it by changing the variant noted below.
The link http://help.sap.com/saphelp_crm40/helpdata/EN/70/B4ED8E03595645A6ABA33B4576BB57/content.htm should display Activity Info.
First I would check if the crm_bsp_f1_help service has been activated in SICF.
Secondly I would check the settings in the IMG -> SAP WAS -> Know. Mgt. -> Settings in App. Sys. -> Usage of Help Type "Dynamic Help". The Tab PlainHtmlHttp should have a variant called CRM_HELP, Server Name (help.sap.com) and path.

How to link a search help to a parameter using which syntax

hi
how to link a search help to a parameter using which syntax

Hi
by useing this F4IF_INT_TABLE_VALUE_REQUEST you can creat a search help for a parameter on the screen
under AT SELCTION-SCREEN ON FIELD
write a selct query and store that values in the internal table and call that internal table in that FM
example
TYPES : BEGIN OF ST_OBJID_SH,
 OTYPE TYPE HRP1000-OTYPE,
 OBJID TYPE HRP1000-OBJID,
 END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
* IF S_OBJID IS NOT INITIAL.
 SELECT OTYPE OBJID FROM HRP1000
 INTO TABLE IT_OBJID_SH
 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
* SEARCH HELP FOR QUALIFICATION.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
* DDIC_STRUCTURE = ' '
 RETFIELD = 'OBJID'
* PVALKEY = ' '
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'S_OBJID'
* STEPL = 0
* WINDOW_TITLE =
* VALUE = ' '
 VALUE_ORG = 'S'
* MULTIPLE_CHOICE = ' '
* DISPLAY = ' '
* CALLBACK_PROGRAM = ' '
* CALLBACK_FORM = ' '
* MARK_TAB =
* IMPORTING
* USER_RESET =
 TABLES
 VALUE_TAB = IT_OBJID_SH
* FIELD_TAB =
* RETURN_TAB = RETURN_TAB
* DYNPFLD_MAPPING =
* EXCEPTIONS
* PARAMETER_ERROR = 1
* NO_VALUES_FOUND = 2
* OTHERS = 3
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
Reward if usefull

How to link a search help to a selection screen field

Hi All,
I am using field PKWRG from PA0017 table in selection screen. I need F4 help there as in Tcode PA30 . But this field does not have value table or check table. However, it has a search help attached 'TRV_PKWRG' .
But, I donot know how to assign a search help to a selection screen field. Please help.
Regards,
Nibha

Hello,
Fetch all the data which from the table which you want to show in the search help and pass the value to the FM
F4IF_INT_TABLE_VALUE_REQUEST and the selection-screen event must be
at selection-screen on value request parameter or selection option variable.
BCALV_TEST_FULLSCREEN
BCALV_TEST_FULLSCREEN_CALLS
BCALV_TEST_FULLSCREEN_PRINT
BCALV_TEST_FULLSCREEN_STATUS
BCALV_TEST_GRID
BCALV_TEST_GRID_DRAG_DROP
BCALV_TEST_GRID_EDITABLE
BCALV_TEST_GRID_EVENTS
BCALV_TEST_GRID_INDEX
BCALV_TEST_GRID_TOOLBAR
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_LIST
BCALV_TEST_LIST_PRINT
BCALV_TEST_LIST_STATUS
BCALV_VERIFY_DTYPES_D0100_F01
BCSMENUF01
BDLCOF10
BDLDVI10
BDLTREDF

Change Max no. of hits in search help

Dear all,
I want to change the max no hits to more then 1000 .
please help to resolve this problem.
Regards,
Chintan

Hi Chintan,
Please refer the below threads,
Search help: default value for 'Maximum no of hits'
/message/3786486#3786486 [original link is broken]
Best Regards.

Function Module for search help Exit

How to create a function Module for search help exits?
please explain in details with step by step process.

Hi,
How to create a function Module for search help exits?
function module for search help F4IF_SHLP_EXIT_EXAMPLE
dynamic search help use 'F4IF_INT_TABLE_VALUE_REQUEST'
please check out the link below it will help you
A repository object maintained in the ABAP Dictionary. It supplies input fields on Dynpros with single- or multi-column input helps. Search helps can be linked in the Dictionary with components from structures, data elements, and check tables. A search help enables you to search for entry values with assigned data, without you having to know the exact spelling of the value.
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
please explain in details with step by step process.
create a search help exit:
1. create an fm with this interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR_T
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
put this logic in it:
Delete duplicate filter logic.
This logic only needs to apply at the 'DISP' event - which is just
before the hit list is displayed
if callcontrol-step = 'DISP'.
delete adjacent duplicates from record_tab.
endif.
2. edit your search help in se11 and enter the name of the above search help exit fm
check this sample code..for dynamic search help
REPORT ZTEST_F4HELP                              .
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
            p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
          posnr type vbap-posnr,
          matnr type vbap-matnr,
          arktx type vbap-arktx,
        end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
       exporting
            dyname               = sy-cprog
            dynumb               = sy-dynnr
            translate_to_upper   = 'X'
       tables
            dynpfields           = dynfields
       exceptions
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            invalid_parameter    = 7
            undefind_error       = 8
            double_conversion    = 9
            stepl_not_found      = 10
            others               = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
       exporting
            input = p_vbeln
       importing
            output = p_vbeln.
select posnr matnr arktx into table help_item
                 from vbap
                      where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'POSNR'
            dynprofield = 'P_POSNR'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = help_item.
also check this link it will help you
/message/3854825#3854825 [original link is broken]
*********please reward points if the information is helpful to you*************

HCM Processes & Forms: Web Dynpro ABAP Search Helps

Hi,
I was working with new functionality for adding Web Dynpro ABAP Search Helps to HCM P&F. Similar to described in http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/17919. [original link is broken] [original link is broken] [original link is broken]
Can somebody tell me if its possible to submit some custom event round trip to back end SAP_PA and Generci Services after selection is made in the Search Help and "OK" selected. Right now it looks like its just closing help and can not submit any events automaticaly.
Thanks,
Oleg

Hi Oleg
As mentioned on the blog, this functionality was in place but has been 'disturbed' by the latest support packs. I have an OSS request in for this but only since yesterday. Once I get a satisfactory reply, I'll post it here and on my blog.
Cheers
Ian

Standard F4 (search help) in the web dynpro JAVA

Hi,
         I have a small doubt in web dynpro Java. Basically I am an ABAP developer. We created some custom Remote function modules (RFM). Now are able to call RFM through web dynpro JAVA in the portal. We are able to run the RFMs in the portal.
         But we have problem with search help. How can I built the search help for the input fields in the portal using web Dynpro Java.
         Can we bring standard search help (which is exist in R/3) in the portal?

Hi,
I think there is no standered functionality available in WDJava to achieve this functionality like ABAP or WDAbap. but, you can still achieve this using OVS option. to do this also, first you should have an interface which can talk to the R3 system and search the dB as per the query parameters i.e, an RFC which can the desired form of input and give you the desired output.
for more info on OVS, please look into this below links.
OVS:
Web Dynpro Java Tutorials and Samples NW 2004 [original link is broken]#51 [original link is broken]
WDJ tutorials:
Web Dynpro Java Tutorials and Samples NW 2004 [original link is broken]

Selecting multiple values from a search help

Hi Experts
Anyone knows if it is possible to select multiple values from a search help?
Thanks
Gaurav

Hi,
You cannot select mutiple values from search help as it is linked to inputfield and hence it will accept single value only. But at the same time, you may able to pass row of values to different inputfields.
Refer http://help.sap.com/saphelp_dm40/helpdata/en/3d/e53642e2a3ab04e10000000a1550b0/content.htm
Thanks,
Chandra

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

The Help Link from the Application Pages Does not Work for Peoplesoft Campus Solutions 9.0

Hi everyone.
I have a problem, I have been trying to set up the Help Link from the Application Pages for Peoplesoft Campus Solutions 9.0 according to the instructions given in the Document: http://docs.oracle.com/cd/E17566_01/epm91pbr0/eng/psbooks/EnablingtheHelpLinkfromApplicationPages.pdf , (referenced in the Doc ID 1289101.1, E-PB: How to Set Up the Context Sensitive Help with Hosted PeopleBooks using Universal Linking).
I follow the instructions of that document carefully:
I go to: PeopleTools -> Web Profile -> Web Profile Configuration
    2. Then I choose the Web Profile: "Development".
    3. Then Change the value for the Help URL field by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5 , the ctx parameter selected is the one that correspond to the Campus Solutions (hrcs90r5) according to the Product Line Code Table (ULinkID) especified in the mentioned document.
    4. Stop the Web Domain and Clear cache.
    5. Start the Web Domain again.
After setting up the Web Profile Configuration I test the help links, thas is why I click in the Help link in any Peoplesoft CS 9.0 Application Page (modify a person), but the next error message appears: "We're sorry, the topic you requested was not found.".
I tried many combinations with the ctx parameters URL but it does not work yet.
I did the same test, but this time using the Help URL field with a HRMS ctx parameter by entering the following URL format: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hcm92pbr5 , and It works fine !!!
According to the previous test you realize that It works with HRMS ctx parameter but not with Campus Solutions 9.0 ctx parameter, Does anybody know what else can I do ? Am I doing anything wrong or missing? or maybe the Oracle's ctx parameter for Campus Solutions URL It is broken simply.
Thanks for you help and feedback.

2799444 - The page you are testing with appears to be a Workforce Administration page. Is that correct?
The CS PeopleBooks would only work for CS pages, e.g.: try navigating to Main Menu > Campus Community > Personal Information > Add/Update a Person
Also, you can use multiple ctx parameters:
E.g.: http://www.oracle.com/pls/topic/lookup?id=%CONTEXT_ID%&ctx=hrcs90r5&ctx=hcm92pbr5&ctx=pt852pbh2
This way the help would work for the HR related pages like Workforce Administration, Campus Solutions pages like Campus Community and also PeopleTools pages like Web Profile Configuration. Hope this clarifies your question. Thanks!

Broken "Search Help" link

Similar Messages

Maybe you are looking for