Browser Detection Kit

I have a site with several flash buttons. I can see them in
IE but not Fiirefox or Netscape. I have re-downloaded Flash Player.
This is the page:
http://trainedwhistle.com/Audio_Books.html.
I have found references to the Flash Browser Detection Kit on this
sire but none of the links work. can anyone help me?

I get a 404 error when trying your link.
Can you check it and re-post.
regards
Nick Barling
www.barkingweb.com

Similar Messages

Flash Player Detection Kit - Help With Ad...

HI all,
I want some advice regarding the Flash Player Detection Kit ( http://www.adobe.com/products/flashplayer/download/detection_kit/ ). I would like to embed the detection process in just one file. Hence how can I embed a detection code into the flash file, so once its exported to swf, it'll have the detection code already and no additional files are needed?
Thanks in advanced.

Seems the reasoning is a little off. If the Flash detection is in the Flash .swf.... but the browser has no Flash plugin.. the .swf would never be read by the browser... hence no "Flash detection" scheme would be implemented.
That's why Flash detection has to take place out-side of the .swf, by the browser... exactly like .swfobject does.
Best wishes,
Adninjastrator

Browser detection code for JSP ?

Hi ,
          Im new to JSP (in case the question wasn't a give-away!!).
          I would like to know how to do a browser detect - becuase I have
          1 CSS for IE and another for Netscape.
          Is there some code snippet site that I can get it from, or can
          someone post it here please> >?
          Thanks heaps
          ROb


try:
          request.getHeader("User-Agent")
          If you want to see it, do something like:
          Browser: <%= request.getHeader("User-Agent") %>
          Hope that helps.
          Regards,
          Eric
          "rob" <[email protected]> wrote in message
          news:[email protected]..
          > Hi ,
          >
          > Im new to JSP (in case the question wasn't a give-away!!).
          >
          > I would like to know how to do a browser detect - becuase I have
          > 1 CSS for IE and another for Netscape.
          >
          > Is there some code snippet site that I can get it from, or can
          > someone post it here please> >?
          >
          > Thanks heaps
          >
          > ROb

Flash Player Detection Kit

社内でFlash Player のバージョン取得の為、Flash Player Detection Kitをダウンロードし使用しようか検討しておりますが、使用方法がよく解りません。マニュアルは英語で・・・。
ただ、バージョンを表示するだけで良いと考えておりますが、Ver7x以下はバージョンが表示されないようです。イントラ上ではなく、こちらのサイトにアクセスしてバージョン表示させるしか方法がないのでしょうか。

こちらに日本語の解説があります↓
http://www.adobe.com/jp/devnet/flashplayer/articles/detectionkit.html
ちなみにFlash Playerのバージョンを取得するだけでしたら、「getVersion関数」でいけると思います。Flash Player 5以上対応とのことです。

Flash Player Detection Kit License

Hi,
I was wondering what the license was for distributing the
Flash Player Detection Kit? And actually not the whole kit, just
the AC_OETag.js file itself. I can find information on licensing
the player itself, but nothing on the kit code.
Thanks,
Diana

There is no license for it. You can use the .js files as you
see fit.
That said, I am rabidly trying to get all our detection
technotes updated to let people know the following...
Note: As of the October 15, 2008 release of Flash Player 10,
Adobe recommends that developers use SWFObject2 for Flash Player
detection. For more information see the SWFObject page at Google
code (
http://code.google.com/p/swfobject/)
or "Detecting Flash Player versions and embedding SWF files with
SWFObject 2" on the Adobe Developer Connection. The following
information effects the Flash Player Detection Kit, which should
continue to work correctly with Flash Player 10.

Using the Flash detection kit from adobe

Question:
I want to use the flash detection kit, which is downloadable
at abobe site.
But the actionscript example that is provided uses a
subdirectory (which is called flash_content) to play the content
when the detection has been done. I've altered the
'flash_detection.as" file, but still it only seems to work if my
content is in the subdirectory flash_content.
But I do not want my content in a subdirectory (also to do
with search robots).
I can't seem to make it work, has anybody got any idea?
thanks

Anyone have any ideas?

Flash Detection Kit - Express Install - Without Internet

Im interested in finding out if its possible to configure the Flash Detection Kit to download the plugins from a network-local location instead of the adobe site. Im working on a system that will be accessed in a closed network environment, and I need to have the plugins available in-house for machines that may not have them installed.
Does anyone have any advice on the best way of solving this?
thank you!

Anyone have any ideas?

Flash detection kit - How ?

Can i anyone give me the code to get the flash detection kit
to work, i just dont get it

JosBVG,
> Can i anyone give me the code to get the flash detection
> kit to work, i just dont get it
Unless there's a reason you need to use that particular
solution, I
recommend SWFObject. It's free, it's in wide use, and its
Google Code
website includes an AIR app that writes all the code for you.
You just fill
in a form of the SWF's name, width and height, etc., and the
thing generates
all the JavaScript code you need. Just copy and paste into
your HTML page.
http://code.google.com/p/swfobject/
There's also really good documentation here:
http://code.google.com/p/swfobject/wiki/documentation
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

¿How i make a Browser Detect swf movie?

Hi, i use a simple embed swf movie in one of many pages i own, but recently I build a new page in html5. But i tested in Internet Explorer and doesnt work well. What i need its a script code in AS3 to use in my swf movie that detect the browser and if the browser its IE9 load an old page, but if its other browser is like mozilla or chrome, load the new page in html5.
It is possible to do that in AS3 right?
Thanks to all
Firefawx

You can simply say "I want an animation to play before it decides which page to load" and we'd get it. So you want to show your logo animation.
Use the tutorial link I gave you and look at the code. It is a full example of browser detection using both actionscript and javascript. ActionScript needs JavaScript to get the information on what browser it is. All of the information and code examples are there to show you how to detect the browser.
Spanish translation:
Usted puede simplemente decir "yo quiero una animación para jugar antes de que decida lo que se cargue la página" y que sería para nosotros. Así que usted quieremostrar su animación de la insignia.
Utilice el enlace tutorial que te di y mirar el código. Se trata de un ejemplo completo dela detección del navegador utilizando tanto ActionScript y JavaScript. ActionScriptnecesita JavaScript para obtener la información del navegador que es. Todos los ejemplos de la información y el código están ahí para mostrar la forma de detectar el navegador.

Unsupported Browser Detected

On three computers (since we updated adobe this last time) when we try to open a PDF file, we get the following message-
"Unsupported Browser Detected
PDF Compatibility Mode requires Internet Explorer 5.5 for Windows or better
If you are not sure whether a supported browser is installed on your computer, please contact your system administrator. PDF Compatibility can be toggled on/off in your System Configuration settings."
I have IE10, Windows 7 (on this system) and XP on the other two. I have re-downloaded both acrobat and flash a few times now, went into the registry key to delete the "creative update" as was suggested on another thread (it was not there), and tried earlier versions. I also downloaded firefox as a browser as was also suggested... no go. I was also told that a 32 bit browser like Chrome would work. It didn't.
After three days of troubleshooting, re-downloading, etc., I am at my wits end.
HELP PLEASE

If the site only works with older versions of Firefox try it with Firefox 3.6
You may wish to try Firefox Portable, you can then use that for the problem site, and continue to use Firefox 8, or 9 for day to day browsing. (I think Firefox 9 is due out as a new Release today).
* see [[installing a previous version of firefox]]
* and http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Does Weblogic Provides any in built utility for server side browser detection

          Hi
          Does Weblogic Provides any in built utility or package for server side browser
          detection i.e. to know the browser details
          of the client with the first request.
          One such available product is BrowserHawk(http://www.cyscape.com).
          any thing similar to this available?
          Thanks in advance
          Mrutyunjay


Hey Mohammed,
          yes, you could use just wl server to do file uploading. in your html client
          code, you need to specify the type of the data that you are sending as
          follows:
          <form action="UploadTestServlet" enctype="multipart/form-data" method=POST>
          File: <input type=file name=file><br>
          <input type=submit>
          </form>
          This will send your file to be processed by the UploadTestServlet. You need to
          code UploadTestServlet yourself to parse and extract useful data. check out
          www.servlets.com for a utility class that does just that
          Winston
          Mohammed Ali Usmani wrote:
          > Hi to All;
          >
          > I want to know if I can use weblogic (webserver) for file uploading from
          > client browser without using any ftp server.
          > Do I have to use some special code (may be in my servlet/html page) for
          > handling this. I mean that do I have to provide the implementation of RFC
          > 1867 by myself at server side?
          >
          > Or it is just merly a browser support? It doesn't effect the webserver at
          > all?
          >
          > Thanks

OT: asp vbscript browser detection

Hello, from some times when I user firefox 2.x or safari on a
page with
browser detection script
Server.CreateObject("MSWC.BrowserType")
I get 'Default' browser name, with explorer all works fine...
howdy

Hello Michael, I thankyou for your suggestion, I see on web
stats some
users with ie5, I try to write some specific style ;-)
Michael Fesser write:
> .oO(howdy)
>
>> I need to switch the css or redirect to another page
old browsers (ie5
>> for sample) because I use some transparent png.
>
> Do such browsers really show up in your logs anymore?
And even if they
> do, I wouldn't care anymore. Or do you want your site to
look perfect in
> Netscape 4 as well? Somewhere you simply have to draw
the line.
>
> I don't even care about IE 6 that much anymore. I also
use a lot of PNGs
> with alpha-transparency, which is not supported in IE 6
(at least not
> natively). But as long as it doesn't look too bad and
all the content is
> accessible, I can live with some glitches.
>
> Write reasonable, standards-compliant markup and CSS,
that's the primary
> goal. Make sure your content is properly structured and
also accessible
> and usable without CSS.
>
> Then, if you think you have to fix something in IE here
and there, have
> a look at conditional comments to include an IE-specific
stylesheet.
> That's the recommended and most reliable way to supply
workarounds. If I
> remember correctly they're supported as of IE 5. But as
said - if this
> browser doesn't show up in your logs anymore, you don't
really have to
> care about it. It would be too much work for nothing.
>
> Micha

Browser detection script

Hello,
I'm wondering how playback in Flash or on older browsers work. Does the published content run a browser detection script?
Thank you.

Actually this seems to work better:
if (accept.indexOf("vnd.wap.wml") >= 0) {
// I have a WAP browser...
}I thought Opera (being WML compatible) would load the WML content, but thankfully it does not broadcast it in the Accept header.
Thanks.

Detection Kit Help

Hello,
I having a tough time figuring out the implementation process
with
Robert Hoekman's flash detection tutorial...here
http://www.adobe.com/devnet/flash/articles/fp8_detection_04.html
I'm trying the Flash Player Express install....
1. I have published HTML and Flash files out of flash and
know I'm confused as the next step says "move the Java Script code
found within the Template's <head> tag to the same location
in your page along with the JavaScript include, AC_OETags.js"
I'm wondering what template he he using.. and where the
information goes? Does it go onto the html I just published from
flash or the html on the playerProductioninstall.html example out
of the detection kit download.
An example of how he used all the files that came with the
kit and how to place them into the HTML that was published from
flash would be awesome.
He did give a few brief examples, they didn't seem to make
sense...
It would be great to get a few examples !

Check out swfobject. Its a better way to embed, detect and
control flashvars etc dynamically.
http://blog.deconcept.com/swfobject/

IE6-only browser detect?

How do I insert code to detect ONLY IE6? This seems to be the
only major browser that messes up my design.
http://descom.org/okay/home.html
Thanks!

Use IE Conditional Comments instead. Browser detection is
pretty
unreliable. To read more about IE CC's Google it.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"descom" <[email protected]> wrote in
message
news:ea84c0$o98$[email protected]..
> How do I insert code to detect ONLY IE6? This seems to
be the only major
> browser that messes up my design.
>
http://descom.org/okay/home.html
>
> Thanks!

Browser Detection Kit

Similar Messages

Maybe you are looking for