BSIK-ZTERM - How to calculate net days?

Dear forumers,
I have a question regarding calculating the scheduled date of a vendor invoice, as follows:
Scheduled Date = BSIK-ZFBDT + BSIK-ZTERM.
I was told that in order to do this, I will need to first know the net days associated with each BSIK-ZTERM, for example, 030N has 30 net days.
Please help me out here as to how to obtain the net days.
Many thanks in advance.
P/S: I have viewed this [thread|Due date calculation; and it seems useful, but I am still unsure on how to proceed with the FM mentioned there (NET_DUE_DATE_GET) as the it only deals with BSID fields. Please help.

Hi Martin,
Thanks for your explanation here.
I will be looking into the FMs again and will see how things go.
Hello MxG,
You mentioned that the due date can be derived directly from BSIK-ZFBDT + BSIK-ZBD1T.
Will this due date mean the same as the scheduled date that I'm looking for?
Thanks for your help here.
I apologize for the multiple posting of my replies here. There were many internal server errors while replying to this thread earlier, and I can't delete the unnecessary replies anymore - please ignore them here. Thanks.
Edited by: Deborah Tan on Jan 7, 2009 4:30 AM

Similar Messages

How to calculate net price based on customized formula

Hi all expert,
I have a requirement in a rental process:
The price of a rental is defined as daily rate (e.g. 100/day) and monthly rate (e.g. 2500/month).
when I create a rental contract, I'd like SAP to calculate net price based on contract duration with both rate and use the lower one.
e.g. rental 5 days. use daily rate = 500; monthly rate = 2500; So use 500.
e.g. rental >=26 days. use daily rate >= 2600; monthly rate = 2500; So use monthly rate 2500.
I was think to use price condition scales to set:
1 - 25 days: 100/day
>=26 days: 2500/month
But the problem is there are 30day a month and 31 days a month. When the contract has to calculate partial month, daily rate has to be calculated as monthly rate/actual days in the month.
How to handle it?
Thank you in advance!

There might be more than one method to resolve the requirement.
You can develop a routine in t.code VOFM and add it in the column AltCTy. The logic in the routine can be if the netvalue exceeds 2500, then the net value should be 2500.
The second option is you can try with using standard. In VK12, after maintaining the pricing as 100/day, go to details. Then in upper limit add value as 2500. Then create a test sales order for 25 days and more than 25 days, then check the values. I think this can help with your scenario.
Regards,

Doubt in how to   calculate net due date

Hi..
Experts   i have   doubt in my salesmen ageing report i have to display
netamout    day wise in the range of   0-30 days , 30-60 days and > 60 days
how to calculate the date difference between to date one is invoice creation date and another one is system date.
Give me any   function module available to count the date difference
and how i filter the amount date wise.
Thanks Regds
Prabir Kumar Dandpat

Hi,
check fm;
SD_DATETIME_DIFFERENCE
regards,
Navneeth K.
Message was edited by:
        Navneeth Bothra

HOW TO CALCULATE NET SALES AND CONTRACT PRICE?

Dear experts,
I have the requirement of sales price report
the report layout should be
Prod descr material Number Contract type contrcat name rebate net sales contract price units
we have the master data information is reside already in multiprovider and transaction information how to calculate in frond end ?
for sales pricing report how to manipulate teh net sales and contract price
value?
any standard formulaes is there?
plz suggest me
regards

Hi,
For quick and best response unless someone answer's in this forum, post your question in SAP Community Network Forums » SAP Solutions » ERP - Sales and Distribution (SD) General or something related to your question.
Check this link if it helps -
http://help.sap.com/saphelp_46c/helpdata/en/93/74353e546011d1a7020000e829fd11/frameset.htm
Thanks,
Shambhu.

How to calculate 40 days pay

Hi Experts,
One employee joined 23 of July.Now how to calculate that 7 days pay in the month of August.for that 7 days we have to calculate PF, ESI and P Tax.
Thanks in Advance.

Probably you don't need to bother for the same. System wil take care of all the calculation.
Still if you are facing any issue, then put the scenario.
Edited by: Praveen Tiwari on Aug 9, 2011 11:28 AM

How to Calculate Net weight, Gross Price, Surhcarges for Confirmed Qty

Hello,
I have a requirement where I need to calculate the Net weight, Amount( gross price), Surhcarges etc.. for the Confirmed qty of
a sales order item. In SAP standard the pricing procedure will run for the Order Qty and all the prices are related to Order qty, not for Confirmed Qty. Confirmed Qty will be sum of all scheudle lines qty.
Is there any standard Function Module to get the prices and weights for Confirmed qty? Just I need to display this data in a Report.
Pelase advise me.
Thanks.

Hello,
Instead of simulating the order I am using the User Exit so that that actaul values will appear in item conditions tab. I am using the Exit USEREXIT_PRICING_PREPARE_TKOMP where I am doing the sum of the scheduled lines confirmed qty and passing the same to TKOMP-MGAME field and the pricing is calculation is done for the confirmed qty. But I am facing some problems when the order has credit block. When the order credit is released via VKM3, the pricing doesn't updated. When doing the credit release, the order cofirms the full order qty and the pricing(Gross price) is not getting updated.
How can we run the pricing update in Order change mode with pricing procedure as 'C'.
Did anyone has worked on this type of req? let me know your thoughts.
Thanks.
prabha

How to calculate the days between last movement of material till today date

Hello Experts,
Could someone help me please?
I have a key figure in the InfoCube 0IC_C03 witch contain the last date of movement of material.
(it is a key figure created in format date and contain the max value).
How can I to calculate the number of days between this date (last movement), till today date (system date).
I need to show:
material........last movement.....days without movements.
xxxxxxxxxxx.....dd/mm/yyyy..........9999
Im trying to do this calculation in bex using variable formula but it doesn't work becouse current date (customer exit) brings sy-datum in format yyyymmdd and the kf-last-mov is in format number (I dont know what kind of number)
Thanks in advance,
Points are assured.
Regards,
Silvio Meurer.
Message was edited by:
        Silvio Meurer

Hi Parth,
Here we are using the version 7.0 and SP 10, I'm afraid I could not understand you. I Can't find the function DATE_DIFF (Where is it?)
I'm using the formula and it doesn't work. Coud you see the result is:
last movement date     Today date        result
02.04.2007                  20.070.625       19.337.856
18.05.2007                  20.070.625       19.337.810
the "today date" is from customer exit and the result is a strange number to me.
Could you help me?

How to Calculate Net Cash in Bank

Hi,
I got requirement to write Query which will return Bank wise Net Cash Amount as of Today. Can anyone guide me how can I build query to get Net Cash amount in EBS R12? Is there any report available which i can refer?
Regards,
Priyanka

Thanks for the guidance.. Executed query using table "ce_bank_acct_balances", FOr some Bank's it is showing value for "Ledger Amount" but not for "Available Amount".
Can you tell me difference between "Ledger Amount" and "Available Amount" ?? and which column will select Net cash available in Bank as of Today..
Regards,
Priyanka

How to calculate compression days in MRP Workbench

Hi ,
I would like to know how system is calculating Compression days in MRP work bench , we are in 11.5.10.2
We see different compression dates for the same quanties.
Thanks in Advance
Kiran

Kiran,
You may have the same quantity but if the need by date is different, you will get different compression days.
e.g. Say today is the 1st. An item is needed on 10th as well as 20th. Both requirement quantities are 10. Also assume for simplicity that your client works on a 7 day calendar. Say the lead time of the item is 30 days and the minimum order quantity is 50.
MRP will generate one requisition for quantity of 50 and use it for both requirements.
But the first requirement will get compression day sof 20 (30 days of lead time - 10 days from now = 20) while the second requirement will get compression days of 10 (30 days of lead time - 20 days from now = 10)
Hope this helps,
Sandeep Gandhi

How to calculate the days with a date field

I need to make a query that shows the number of flown days at the end of the month for the whole fleet, given a date that represents one day within that month.
I would appreciate all the help I can get
thanks in advance

Hi,
I am not sure if I interpreted your question correctly, but are you looking for counting for number of days between two days?
If yes, see if the following example query helps you.
SQL>select to_date('30-Jun-2003') - to_date('30-May-2003') from dual
- this returns 31.
If not, could you please give more details of your requirement with an example?
-Savitha.

Fbl5n - calculate net due date

Hey All Gurus,
I am writting a report and want to calculate the net due date which we see in FBL5N. This is a customer aging report, and I have tried using fm DETERMINE_DUE_DATE or J_1A_SD_CI_DATA_GET... is there any other formula that I can use from zfbdt/zfbd1t...
Please help. Thanks a lot Nina.

hai,
my requirement is also to do the customer ageing report will u please help me on that how to calculate net due amount,
regarda,
karthik

How to calculate a number of calendar days from a start date (e.g. 60 days from 3/10/2012)

How to calculate a number of calendar days from a start date (e.g. 60 days from 3/10/2012)

DT,
If the starting date is in Column A, and you want to calculate what the date would be 60 days later, in Column B, write in Column B:
=A+60
Couldn't be much easier.
Jerry

How can I calculate a day of a week?

I want to calculate a day of a week.But I always getting ArraysOutOfBoundException.Here's my code:
import java.util.*;
import javax.swing.*;
class daydate{
     public static void main(String args[])throws Exception
     String arr[]={
          "satarday","sunday","monday","tuesday","wednesday","thursday","friday"
String output="",op="",m,m1,m2;
     Calendar calendar=Calendar.getInstance();
     int i=calendar.get(Calendar.DAY_OF_WEEK);
/*if(i>6)
     i=i-7;*/
// System.out.println(i);
     output+="\ntoday is :"+arr[i]+"\n";
     JOptionPane.showMessageDialog(null,output,"day",JOptionPane.INFORMATION_MESSAGE);
     m=JOptionPane.showInputDialog("Enter year.");
     int n=Integer.parseInt(m);
m1=JOptionPane.showInputDialog("Enter month.");
     int n1=Integer.parseInt(m1);
     m2=JOptionPane.showInputDialog("Enter date.");
     int n2=Integer.parseInt(m2);
calendar.set(n,n1,n2);
int j=calendar.get(Calendar.DAY_OF_WEEK);
/*if(j>6)
j=j-7;*/
//System.out.println(j);
op+="\nthat day is/was :"+arr[j]+"\n";
     JOptionPane.showMessageDialog(null,op,"day",JOptionPane.INFORMATION_MESSAGE);
System.exit(0);
the error is:
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 7
     at CalculateDay.main(CalculateDay.java:28)
I wonder using calendar.get(Calendar.DAY_OF_WEEK) makes the value of i=7;But my array's highest value is 6.That's why I always get the above error.
How can I solve that?

I think the DAY_OF_WEEK is working from 1 to 7, and
Saturday, on my PC (UK GregorianCalendar) is 7. Your
array is based 0, and only work from (0-6).
Either subtract 1 from the value DAY_OF_WEEK, or add
a blank item at the beginning of the list.
Better, I think is used the built-in capability using
public String getDate(String format){
Calendar c = new GregorianCalendar();
Date d = cal.getTime();
DateFormat df = new SimpleDateFormat(format);
return df.format(d);
You can then call the getDate() with various formats
ie.
getDate("EEE") alone to get "Wed, Thur" .. etc
getDate("dd/MM/yyyy HH:mm:ss") to get the current
Date and time in that format.
Hope it helps.Thanks William for your valuable help.Anyway,you wrote,
Date d=cal.getTime();
Is it cal or c?

How to calculate acquisition value for specified day

Hi,
in my z program I have a problem how to calculate acquisition value for my asset for specified day.
Example:
I have asset created 8.7.2008 with TTYPE 104 (External asset acquisition) with value 5950.
30.11.2008 there is another TTYPE 272 (Retirement of current-yr acquis., w/o revenue) with value 950.
So BEFORE 30.11.2008 acquisition value is 5950. After is 5000. Is there any function module (or something else) in SAP system where I can send asset number and date a it return to me acquisition value for that day?
Many thanks for any answer!

Hi,
your suggestion means that I have to compute acquisition value by myself (sum all TTYPE 1** - sum all TTYPE 2**). So SAP does't provide such functionality (LDB ADA have it, because it can compute acquisitiob value for specific day)?
Mant thanks for answer

How we add Grace days to net due date

Hi,
How we add grace days (eg one week) to net due date? This is only for particular customers.
Regards,
Shaik

Hi Azeen
Try this way. I assume that you want to know how much is due from customers as on a particular future date, that should come between today and that date. For preparing the liquidity forecast for the month, I use the following method for estimating the recoveries from the Customers and payments to Vendors and it works quite well for me.
Let's say for Customers you want to forecast the collections that would come in the month of Jan from today until 31 Jan'09. Use the FBL5N Report, using the 'Open Item Key Date' as a future date, in our example - 31 Jan'09. Change the layout of the report by including the feilds 'Net Due Date' and 'Arrears after Net Due Date'. Sort the report on the Document Date, this being the baseline date. Now in the 'Arrears after Net Due Date' you will find the overdue days, which would be equal to the difference between the Date of the Report (31 Jan'09) and the Net Due Date of the Open Item. Thereafter, use the filter for 'Arrears after net due date' and click on the icon for 'multiple values'. Exclude the range of days, by assigning the lower and the upper limits. Lower Limit will be in minus, for those invoices that would still not be due upto 31 Jan'09 and the upper limit will be 7, since you would be granting a grace period of one week and consider all those invoices as not due upto 31 Jan. Once the filter is set, the report will exclude the open items as per the filter and provide you with a fairly accurate estimate of collections for the period/month.
Let me know if it works for you.
Regards

BSIK-ZTERM - How to calculate net days?

Similar Messages

Maybe you are looking for