BSP Material

Hi,
I wnt BSP material any one suggest good materail,
thanks
Satish

Hi,
Check things like
http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
http://help.sap.com/saphelp_webas610/helpdata/en/1a/c5133a62983c0ae10000000a114084/frameset.htm
and books like
http://www.sap-press.com/product.cfm?account=&product=H959
http://www.sap-press.com/product.cfm?account=&product=H1903
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

Similar Messages

How to add Material ID in IBASE BSP APP (comm_ibase)

I am dealing with standard BSP application in CRM Service management.
Application name is: COMM_IBASE
Steps that I did:
1.     When I click new>installed base> new page
2.     I removed all tabs (such as interaction histories, activities, opportunities, etc) except general information.
3.     In general information, I have add R/3 Material ID (just description is enough), which I have already replicated from R3 to CRM system.
Where can I find the Material ID, like which structure? Or should I have to extend the class (using class builder!). Can somebody help me on this issue? Thanks in Advance.
Thanks
KK

Dear Nilesh,
Have you maintained the <b>OTR</b> for 'CFX_UI/SIGN' ?
To create an OTR (Online Text Repository) simply follow these steps:
Step 1. Open BSP Application cfx_rfc_ui and navigate to the desired page. In your case it will be: doc_de_ver_create_htm.htm
Step 2: Click on Goto -> Online Text Repository Browser.
Step 3. Create OTR, In Alias name specify CFX_UI/SIGN
and in the text editor below mention Sign (the text that you want to display on the button)
Hope this solves your problem. Pl. award points for useful answers.
Regards,
Reema.

Any good material on BSP and specially for MVC

Hi,
I am new to BSP extension and MVC and i just want to do some knowledge building on MVC and BSP extension. If any one have good material on it other than http://help.sap.com/[/url] then please let me know.
Thanks in advance,
Sunil Bhavsar.

Here are a couple of other weblogs on the subject of MVC and BSP Extensions:
/people/brian.mckellar/blog/2004/08/19/bsp-programming-writing-a-pattern-engine
/people/brian.mckellar/blog/2004/08/09/bsp-programming-event-handling-in-composite-elements
/people/brian.mckellar/blog/2004/07/28/bsp-programming-handling-htmlb-events
/people/brian.mckellar/blog/2004/07/28/bsp-programming-writing-composite-elements
/people/brian.mckellar/blog/2004/07/18/bsp-in-depth-using-the-htmlb-event-system
/people/brian.mckellar/blog/2003/10/30/bsp-programming-bsp-element-expressions-bees
/people/sergio.ferrari2/blog/2006/08/28/bsp-in-depth-model-data-binding
/people/brian.mckellar/blog/2005/04/25/bsp-programming-gen-branchoffset-limit-reached
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomasalexander.ritter/blog/2005/03/16/bsp-how-to-emulate-frames-using-mvc
/people/thomasalexander.ritter/blog/2005/03/07/bsp-stateless-modelbinding--proof-of-concept
/people/sebastian.kamp/blog/2004/10/20/doinit-and-the-initialization-of-controllers-in-mvc
/people/thomas.jung3/blog/2004/09/24/important-lessons-involving-bsp-model-view-binding-and-a-frozen-burrito
/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table

Material description in the SUS vendor screen in MMSUS scenario

Hi All,
We are working on MM SUS scenario with SRM5.0 and ECC 6.0 as the backend.
We are sending the PO and SAR from R3 to SUS. When vendor logs in to create a POR and ASN, he is not able to see the material description rather only material code is available in the screen.
Same thing for the business object BUS2231 ( for ASN) we are able to see the same in BBP_PD in GUI.
What could be the reason?
We are using standard BSP pages for SRMSUS service.
Best regards,
Sridhar

Hi All,
Any clues on this, are we missing any standard jobs which are to be scheduled for bringing material description to the SUS screen?
Best regards,
Sridhar

Passing data from one bsp application to another

Hi,
I have few queries that most of you would have done in ur projects:
1. I want to pass data from one bsp application to another:
eg based upon selected row of table view which populates material no and descriprion to another application which open the entire material master data.
Now, i have both the pages in diff bsp applications in place but unable to pass the selected material code to the second bsp application.
Had it been two different pages of same application I was able to achieve it with set parameter()
2. To stop the application from reprcessing the data:
eg: Suppose I have a bsp page where user fill details of a customer and on submitinng the details a customer is created in background and the entire page is disabled by my code. Even now if the user press refresh (F5) button then another customer gets created in the background. So basically i want to avoid the reprocess of the onSubmit event
Few lines of sample code would be very helpful.
Best Regards,
Saurabh Tripathi

Hi,
When I am writing the following code in appl1/page1:
        export abc from transactionID
        to data buffer lv_page_data.
        CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>SET_SERVER_COOKIE
          EXPORTING
            NAME                  = 'TRANSACTIONID'
            APPLICATION_NAME      = RUNTIME->application_name
            APPLICATION_NAMESPACE = RUNTIME->application_namespace
            USERNAME              = ls_name
            SESSION_ID            = runtime->session_id
            DATA_VALUE            = lv_page_data
            DATA_NAME             = 'lv_page_data'
and following code in appl2/page2:
CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>GET_SERVER_COOKIE
    EXPORTING
      NAME                  = 'TRANSACTIONID'
      APPLICATION_NAME      = RUNTIME->application_name
      APPLICATION_NAMESPACE = RUNTIME->application_namespace
      USERNAME              = ls_name
      SESSION_ID            = runtime->session_id
      DATA_NAME             = 'lv_page_data'
    CHANGING
      DATA_VALUE            = lv_page_data
   IF lv_page_data IS NOT INITIAL.
     IMPORT abc to transactionid
       FROM data buffer lv_page_data.
   ENDIF.
still the code doesn't work. Please explain and guide
Best Regards,
Saurabh Tripathi

Not able to see backend material document number in SUS

Hi,
A GR is created in ECC. It is avaiable for disply in the supplier's login. We are able to achieve this.
The question is "We are not able to see backend (ECC) material document number anywhere on the screen. We are only able to see the SUS Confirmation number (i.e. as per the number range assigned to BUS2233). Is it standard behavior?
Details: SRM7.0 SP07, ECC Ehp4, Using MM-SUS. Plan driven procurement.
Ganapathi

Dear Manjunath,
Thanks for the response.
We have noticed that, the back end (ECC) material documents are getting replicated to SUS as we are able to see this number in BBP_PD & BBP_PDBEH-BE_OBJECT_ID.
So, let me put the question this way.
Our issue is with display of document in the portal (BSP Pages).
For Example, in case of Invoice, the supplier can see the back end MIRO invoice document number with the "External Reference" Label, under Basic Data section. The case is NOT same with GR. The back end (ECC) material document number is NOT seen any of the layout (for end user, who has logged in as supplier).
Is it standard behavior? If we want that, the suppliers should be able to see the material document number in the portal, when a GR is created in ECC, what settings we have to do?
Ganapathi

BSP and DMS (Document Management)

I have to develop a BSP application which provides Documents links from DMS. Is anybody know which BAPI i can use to optain relation between the material (MATERIAL_GETLIST) and the document number DOKNR ?
Is somewhere on a blog something was published about this topic ?
Thanks a lot
Jerome

You're right but my customer had a problem on his WAS. Bapi browser didn't work. I tried to connect the BOR with my Visual Studio and my SAPDOTNETConnector I had the same problem. So I did some zfunction on the R/3 systems all called these from my BSP application. Good way to optimize the performance...
My proof of concept was a success for my customer, and he was reinstalling a complete WAS to continue the project

In BSP how to give the input field as mandatory?

Hi friends,
In BSP how to give the input field as mandatory?
In BSP i want to validate the input field (example checking the material no is valid or not)
if this material no doesnot exit means i want to pass error message.What is the code for that.
Moosa

hi
try this
in LAYOUT
<htmlb:inputField id = "vname" disabled = "False" value = "<%= v_visitor %>"/> <font color="red" size="2"><b><%= page->messages->assert_message( 'vname' ) %></b></font></td>
in DO_HANDLE_EVENT
in oninputprocessing
CLASS CL_HTMLB_MANAGER DEFINITION LOAD.
IF event_id = CL_HTMLB_MANAGER=>EVENT_ID.
DATA: event TYPE REF TO CL_HTMLB_EVENT.
event = CL_HTMLB_MANAGER=>get_event( runtime->server->request ).
IF event->name = 'button' AND event->event_type = 'click'.
    DATA: button_event TYPE REF TO CL_HTMLB_EVENT_BUTTON.
    button_event ?= event.
ENDIF.
    case event->id.
        when 'select'.
           if v_visitor = ''.
             page->messages->add_message(
             condition = 'vname'
             message   = 'Visitor Name can not be blank'
             severity = page->messages->CO_SEVERITY_ERROR ).
          ELSE.
                here u can write ur when ur field getting filled
        endif.
     endcase.
endif.
give marks if it is helpful
thanks

Material booking in pm order -reg

Hi Gurus,
While making material booking in iw32->components tab,the following error appears;
Entry does not exist - check your entry - Error : 0058.
But the matcode is present in the respective plant.so what is the setings to be done to capture the matcode in
components tab.
Thanks in advance.
prabu

Hi,
[SAP Note 840850|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=840850]
[SAP Note 708266|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=708266]
[SAP Note 921751|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=921751]
All are with same message 0058. Please check all the notes.
Regards,
Maheswaran.
Edited by: Maheswaran.K on Jun 21, 2011 6:55 AM

BSP screen in edit mode

Will i be able to create a BSP screen in edit mode?Or can i be able to create a material(MM01) from BSP screen.

Hi Niranjan,
You can design any transaction using BSPs. But for designing big transactions like MM01, VA01.. it takes more development hours and effort.
Generally we will design very simple transations using BSPs.
Thanks,
Sreekanth
<i>*-- Please reward helpful answers and close the post if your issue is solved..</i>

Currency(Calculated) field in a BSP Page

Dear all,
I have a field "menge" where in i take the user input of material Quantity and another field "netwr" to display value.
On Initialisation I have written code to take the rate of a material from customizing table and multiply with the quantity and take it into "netwr" as value.
The problem is that when the value is displayed a space appears after the full decimal
Eg :
for Menge = "3.000"
and Rate = "1.50"
The Value should have been "4.50"
BUt it is displayed as "4.50 "
Please help me in this regard.
Thanks and regards,
Arun

Hi Arun,
What is the data type of the "newtr".?
While Displaying the currrecy in BSP we can use the foll syntax.It will format the currency.
<%=page->to_string( value = <b>itab_bp-bet01</b> format = if_bsp_page~CO_FORMAT_CURRENCY ) %>.
Rgds,
Jothi.
Pl close the thread if you got the soln.

Deactivate authorization checks in BSP or function modules?

Hi all
I have a BSP application that seems to use a standard function module that performs an unwanted authorization check on object M_MATE_VKO (Material check on sales organization)
I know it is possible to globally deactivate authorization checks in certain SAP transactions (SU24)
Does anyone know if there is a similar functionality for BSP applications or function modules? Any suggestions on how to deactivate such authorization checks in BSP applications?
Regards
Mike

> I will also check with my developer if this function module has any return codes etc that can be useful for a custom authorization check. However, I thought these checks were all done within the function module and that it will only return a true/false authorization, sort of... and I am not sure it's a good idea to override all standard authorization checks in this function module
Sometimes you can handle the messages, but your developer will be able to help you decide whether that is a good idea or not.
Globally deactivating the object for the whole system is most likely not a good idea, as you seem not to want to grant it because you need it somewhere else...
Deactivating all checks for the function module is probably not wise either, as I would think that it applies to the whole function group. Developers can do such things sometimes, but often it results in all end users being able to do the same.
I know that proposal indicators can be set for function modules, but have not tried check indicators. Again, I suspect that it would apply to the whole function group.
I would think that a carefull choice of function module and consulting with your functional guru about config which will not interfer with other requirements is the best route to take.
I like threads like this. If I bump into a specific solution I will remember it. Try using the search here at SDN on the names of some of the FM's which you are considering - someone might already have solved it...
Cheers,
Julius

ALE, EDI, WAS, BSP, BAPI

HI ALL,
CAN YOU TELL ME A BRIEF ABOUT ALE, EDI, WAS, BSP, BAPI AS IT IS VERY COMMON IN EVERY INTERVIEW ?
REGARDS
RAJARSHI

Hi Rajarshi,
IDOCS:
IDOCS are intermediary documents which are like CARRIERS of the data
IDOCs are safe to transfer data, but less volume of data. User is not allowed to access (modify) the data like PSA. IDOCs have 3 parts.
1. Control Record - SOURCE & TARGET details,
2. Data Record - Here comes your query....
Info IDOC - It contains all the technical details related to the data load i.e. Request NO, No of Data Packages, USER, DATE, TIME, LOGICAL SYSTEM, etc. Info IDOC is also ONE segment, the 1 sr segment.
Here data will not be there.
Data IDOC - These are the ones which hold the data. The total no of records are made into Data IDOCs i.e. if 99 records are there then 99 Data IDOCs will be there and all these will be divided into 99 segments.
Hence the total number of Segments in IDOC is 100.
Info IDOC + Data IDOCs = Total no of Segments
1 + 99 = 100.
3. Status Record - Here the status of the data transfer will be available.
ALE:
ALE is Application linking & Enabling which enables to interface SAP with other modules
Pl go through below links as they provide all the required info on ALE & IDOC's:
ALE / IDOC:
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Also check this links for additional information.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
u will have enough material from above .....
Mostly SD consultant doesnt deal with EDI, Idocs but its always good to have knowledge,
EDI
EDI concept in SD: the EDI concept is intended to realize the sales and distribution process completely automatically with the help of electronical documents. These documents are sent from one customer to another, are processed mostly on the background and give a possibility to realize the sales process extremely efficiently.
If MM-customer would like to purchase the goods then he creates the IDOC of type ORDERS and send it to SD-customer. On the SD-side the IDOC is processed via the function module IDOC_INPUT_ORDERS and creates the sales order. As confirmation the SD-side can send to MM-side the Order-Response IDOC (function IDOC_OUTPUT_ORDERS). The MM-customer can every time send a change to the existing order, then on SD side the ORDCHG IDOC will be processed. It can change the order like in VA02. The creation of the invoice can be made via IDOC of message type INVOIC (function IDOC_OUTPUT_INVOIC).
So, the process can be realized completely automatically between SD and MM partners with the help of IDOCs: ORDERS, ORDCHG, ORDRSP, and INVOIC.
That's all concerning the SD-EDI.
Additional processes in SD, where EDI are used:
1) application of delivery schedules to the scheduling agreement: IDOC of type DELINS
2) creation of a delivery order to the scheduling agreement: IDOC of type DELORD
3) creation of external agent service delivery to scheduling agreement: IDOC of type EDLNOT
4) creation of credit advice / credit memo in the frames of self-billing: IDOCs of type GSVERF, SBWAP and for external invoice creation SBINV.
It is all processes which are realized in the SD module via EDI.
Go through this, You will get better idea on EDI,ALE,IDOCS
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
BAPI:
BAPI (Business Application Programming Interface) is a set of interfaces to object-oriented programming methods that enable a programmer to integrate third-party software into the proprietary R/3 product from SAP. For specific business tasks such as uploading transactional data, BAPIs are implemented and stored in the R/3 system as remote function call (RFC) modules.
BAPIs (Business Application Programming Interfaces) are the
standard SAP interfaces. They play an important role in the
technical integration and in the exchange of business data
between SAP components, and between SAP and non-SAP
components. BAPIs enable you to integrate these components
and are therefore an important part of developing
integration scenarios where multiple components are
connected to each other, either on a local network or on the Internet.
BAPIs allow integration at the business level, not the
technical level. This provides for greater stability of the
linkage and independence from the underlying communication
technology
http://www.erpgenie.com/sap/abap/bapi/example.htm
http://www.sap-img.com/bapi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e0/9eb2370f9cbe68e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/b46c1e53c111d395fa00a0c94260a5/content.htm
http://www.sappoint.com/abap/bapiintro.pdf#search=%22BAPI(SAP)%22
http://www.erpgenie.com/sap/abap/bapi/index.htm
http://www.erpgenie.com/sap/abap/bapi/conventions.htm
http://www.erpgenie.com/sapgenie/docs/BAPI%20Programming.doc
http://64.233.167.104/custom?q=cache:eyMZ5qPOH-0J:www.erpgenie.com/sapgenie/docs/BAPI%2520Intro.doc+bapi&hl=en&ct=clnk&cd=6&ie=UTF-8&client=pub-2723892367221695
http://64.233.167.104/custom?q=cache:c7cwsXMxq-UJ:www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf+bapi&hl=en&ct=clnk&cd=1&ie=UTF-8&client=pub-6389415953938571
List of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
FOR BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

BSP and adobe interactive forms.

Hello SDN,
can i embed an interactive form for adobe in BSP, if yes then how?? My client wants to embed an interactive form in a BSP application where in users can enter data .
Many thanks
Pankaj

Hi,
Pls check this thread:
Adobe Interactive forms for material creation
Eddy
PS. Reward the useful answers and you will get <a href="http:///people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

Calling STD SAP transaction in BSP

Hi All,
I am new to BSP.
Is it possible to call SAP standard transaction in the BSP page, browser should be Internet Explorer.
I have tried for mm03 but when I use call transactio it opens STD SAP Session with given paramerers (material number).
And the problem is that . I want to call it in Internet
Explorer
if yes.
Can anyone tell me tell me how it is possible.
Thanks in Advance,
Dhananjay

Thanks Raja,
I am in 4.7 E
This is my code for VF03 ,
this is layout code of page
<%@page language="abap"%>
<<html>
<body bgcolor = "silver">
<form>
<input style="Z-INDEX:   BACKGROUND-COLOR: #FFFFFF;
BORDER-BOTTOM: black 1px groove; BORDER-LEFT: black 1px groove;
BORDER-RIGHT: black 1px groove; BORDER-TOP: black 1px groove;
FONT-FAMILY: Verdana, arial; FONT-SIZE: 8pt; TEXT-DECORATION: none"
type="text" name="number" value = "" maxlength = 10>
<INPUT style="Z-INDEX: 103; BACKGROUND-COLOR: whitesmoke" type="submit"
name="onInputProcessing(select)" value="Display" action = "tcode.htm">
</form>
</body>
</html>
This is its event handler(OnInputProcessing)
event handler for checking and processing user input and
for defining navigation
case event_id.
when 'select'.
    navigation->set_parameter( 'number' ).
    navigation->next_page( 'tcode' ).
   set parameter id 'VF' field number.
endcase.
*****This is code for next page
Layout
<%@page language="abap"%>
<html>
<body BGCOLOR="#f5f5f5">
<h2> Your Customer search </h2>
<%
if number is initial.
%>
<h3> Sorry, we found no matches for <%= number %>. </h3>
<%
else.
%>
<%
endif.
%>
Event Handler(OnInitialization)
if number is not initial.
   SET PARAMETER ID 'VF' FIELD number.
   call transaction 'VF03'.
else.
number = '%'.
endif.
Plesae check it, I am waiting Or Give me sample code for any TCODE.
Thanks,
Dhananjay

BSP Material

Similar Messages

Maybe you are looking for