BT-183 bluetooth: how to adjust data rate?

Hello everybody.
The title of this topic is pretty self-explanatory.
Is there a way to increase data transfer speed of ASUStek BT-183 bluetooth module?
28 KB/s, which is set by default, is not sufficient for me
Even my mobile phone can transmit data twice as fast.

Well, the calculation is the approximation of your channel (variables with index 0) to a new one (index 1).
The freq(0) and freq(1) are the sampling frequencies for the channels for the case you have waveform channels.
The n(0) and n(1) are the numbers of the data points inside the channels. The new created channel should have the number n(1), calculated from n(0) with regard to different sampling ratios.
The real code is the line Call ChnSplineXYCalc(..... The properties swapping can be commented out, but then the new channel would have a "system name", something like "Approximated XY", and the same for description and units... Probably one can avoid it by changing of settings, but I use to do it by code.
In short, here you copy the properties from the "old" channel and paste them to the new one.

Similar Messages

How to adjust data in new profit centres

hi experts,
i have a issue, till now i have only two profit centres, i have to create one more profit centres, i need to adjust data in previous two PC's to all three profit centres ( all previous years data in PC's).
what are the things to be done, throw me some inputs,
rajen1975 at rediff

hi,
thanks for reply, sorry, my question is some what unclear, requirement is till now we are using two pc's, now we want to add few pc's. after this we need to take financial statements, for that we need to adjust previous pc's data in to all pc's ( old and new). how to update this data,
any suggestions,
regards,

How to adjust Date for the HPBEA4E7 (HP Photosmart 5520 series)

Can somebody tell me how to adjust the date for my HPBEA4E7 (HP Photosmart 5520 series)?
For example, I changed the black cartridge yesterday and the printer tells me that I did that on 01/01/2015.

Hi @PieterF3rd
Most of our printers have a setting in the Preferences menu to change the date and time, but it appears this one does not. On the front panel of the printer, touch the little wrench in the top tight hand corner to access the settings menu. In the Setup menu select the Preferences menu and check there, if it is not there maybe check the tools menu. From what I can see, the option is not there, but it certainly should be.
If you can't find the option, I would give us a call and express the issue to a phone professional. It is possible that that connecting the printer to a network and enabling the Web Services will automatically update the date and time, but this should be necessary considering not all customers have network access.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to adjust sample rate of data?

I have some data collected at 1683 Hz (yes, that was what I had!) and would like to reduce the sampling rate to some meaningful number, say 1024, 500, 400, or similar.
What should I do?

Well, the calculation is the approximation of your channel (variables with index 0) to a new one (index 1).
The freq(0) and freq(1) are the sampling frequencies for the channels for the case you have waveform channels.
The n(0) and n(1) are the numbers of the data points inside the channels. The new created channel should have the number n(1), calculated from n(0) with regard to different sampling ratios.
The real code is the line Call ChnSplineXYCalc(..... The properties swapping can be commented out, but then the new channel would have a "system name", something like "Approximated XY", and the same for description and units... Probably one can avoid it by changing of settings, but I use to do it by code.
In short, here you copy the properties from the "old" channel and paste them to the new one.

How to adjust sample rate in "capture preset"?

I'm having to recapture footage shot some years ago on my old Sony VX1000 using my Sony Z5U. I'm working on FCE 4.0 (OS 10.4), Easy Setup at DV-NTSC and capturing by "capture now." I'm getting a warning saying that my sample rate of capture does not match sample rate of source tape and advises me to ensure that my audio sample rate of the "capture preset" matches the sample rate of [my] source tape. Browser tells me that my sequence and my clips audio rate are both at 48 KHz, but my sequence audio format is 32 bit floating point, and my clips are at 16 bit integer. How do I access capture preset and synch capture rate?
Thanks

48KHz = 16bit
32KHz = 12bit
Can't be both at the same time.
Most cameras come set to 12bit as the factory default. On the Canon miniDV cams like your ZR500, go into the menus for *Camera Setup > Audio Setup > Audio Mode* and you should be able to toggle between 16 bit and 12 bit audio.
You want to film your videos using 16bit audio if at all possible. If you have done so, then you should use the DV-NTSC easy setup in Final Cut Express (not the DV-NTSC 32KHz easy setup).
If you inadvertently filmed your video using 12-bit audio then you will need to use the DV-NTSC 32KHz easy setup in FCE.

Automatic Daily report - how to adjust dates

Hi,
I am seeking help with date syntax in SQL.
I have created a query that uses "where convert(date, a.visistdatetime) = convert(date , getdate ()-1) in the where statement to pull the previous day's visits. The plan is to automate this query into a daily report in a SQL
server environment.
The problem is, my "where" clause does not account for weekends when business is closed. In the case of Monday's, I am seeking query "date" syntax that will pull visits from the previous work day (which would be Friday). I'd
like the same to happen whenever a Holiday occurs.
Any ideas?

In addition to Patrick's, if you wouldn't like the where clause looks too complex, you may reference pseudo-code below.
;WITH cte
AS --get all consecutive weekdays
(SELECT *
FROM calendartable
WHERE isholiday = 0
AND weekday NOT IN( 1, 7 )),
cte2
AS -- join cte to get all weekdays in your table
(SELECT y.*,
Dense_rank()
OVER(ORDER BY y.[date]) AS DR
FROM yourtable y
JOIN cte c
ON y.[date] = c.[date])
SELECT * --get previous workday's data
FROM cte2
WHERE dr = (SELECT dr - 1
FROM cte2
WHERE [date] = Getdate())
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

How to adjust data in first and next pages in sap smart forms ?

Hello,
i am creating a purchase order and displaying it in a smartform. I have a main window in which i have a table listing the material details nested with item asscoiated with it. Underneath this table/main window, i have another window containing some 'special instructions'. And underneath this window i have another window which acts as a footer(signatures).
Now what happens is that when i increase the no of items against a material in purchase order or input too many materials , my table gets cut and goes on to the next page ( which looks bad ).
according to you what should i do ? or can i calculate or check the number of entries in the table and if they exceed the height of the main window, take the main window or the table to the next page(so that it doesnt get cut) ??
help needed ,, thanks....

Hi,
If the no. of line items are more then the data has to overflow into the next page. However, if the data is getting cut at the row level, meaning half of the data that belongs to the row is being split into two pages, then you can switch in the PAGE PROTECT mode at the line level.
This will make sure that row is either completely displayed in the same page or the next page.
Regards,
Ravi
Note : You have quite a few threads open, please mark all the helpful answers and close the threads if the questions are answered

Adjusting data element

Hello Friends,
Can any one tell me how to adjust data elements in ' without modification assistant in spau tcode.
Thanks,
Vibha

Hi   ,
select the obect thne see the display ... it will show the   obect status   and go fot eh version when it was   changed    if you do want to modify the skip ... if you want modification then change ....so
for not changing   it is skip   ..
for chaning it is changing ..
Girish

Windows Proximity Un/Lock using ThinkPad Bluetooth with Enhanced Data Rate Software

While installing the driver for ThinkPad Bluetooth with Enhanced Data Rate Software, the installer asks whether I want to include additional features such as Windows Proximity Un/Lock, file transfer, and others. However, after installing, I cannot find the Proximity Un/Lock option anywhere.
Can someone please enlighten me as to how I can activate this built-in feature? THANKS!
-Raj

Hi
Welcome to Lenovo Community
You can directly download and install this package . It will not do any harm to any other component of Operating System
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70042
Hope This Helps
Cheers!!!

Datetime in log is greater than current date, how to adjust them

our env is jes8.1 and solaris 8, and the datetime of log in jes is 8 hours greater than current date in solaris, I want to know how to adjust datetime of log to current date?

Type
#date
at the prompt and check whether the log file date/time and the system date/time are the same. I guess the log file uses the system date/time. if tats the case then change the system date/time

ThinkPad Bluetooth with Enhanced Data Rate Software Problem

I'm having a weird issue. I use a X200t tablet with Windows 7 Profession 64-bit.
Apparently my current "ThinkPad Bluetooth with Enhanced Data Rate Software" is Version. 6.2.1.2900.
Thinkvantage System Update wants me to download and install Version 6.2.1.3100.
However, it tries and I get Error 1935 and it rolls back. Now when I start windows I get an alert about BTTray.exe not loading.
Of course I searched this problem, but it seems to be some ancient thing (years old) and I've never had a problem before with any of the Bluetooth updates.
I did notice that in past versions people said when they tried to uninstall the old version and install the new one, it just wiped their hard drive. I don't want to risk that so I thought I'd check here if anyone knew what was going on.
Thanks!

Hi
Welcome to Lenovo Community
You can directly download and install this package . It will not do any harm to any other component of Operating System
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70042
Hope This Helps
Cheers!!!

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.

How can I cancel "The Garage Band content is now downloading" once it starts? I thought it would show the size of the download, but it just assumes I have unlimited bandwidth, instead of mobile data rates which are super expensive.
Once it started, it just shows it's progress and there's no option I can find to stop the download.
Any help greatly appreciated.
Regards,
Kye.

Hi,
I am not sure whether it works, Try "Restore Sound Library" in Menu.

Please tell me how to adjust field width for alv data .

Hi,
Please tell me how to adjust field width for alv data . Also i want to remove zeros after decimal coming in field.
Regards,
Ranu

Hello Ranu,
You need to set OUTPUTLEN field from field catalog table for every column.
DATA lt_fieldcat TYPE lvc_t_fcat
DATA lw_fcat type lvc_s_fcat .
lw_fcat-fieldname = 'BNAME' .
lw_fcat-inttype = 'C' .
lw_fcat-outputlen = '12' . -----> for e.g. set width of column BNAME
lw_fcat-coltext = 'User Name' .
lw_fcat-seltext = 'User Name' .
APPEND lw_fcat to lt_fieldcat .
Hope this resolves your issue!
Thanks,
Augustin.

Can't install Bluetooth Enhanced Data Rate Software II

Can't install Bluetooth Enhanced Data Rate Software II. When I try to install the software it says that there are no Bluetooth in my notebook, but it present in my configuration:
      0A69630
SBB INTCR I7-2620M PROC USB3.0
      45M3092
VBB GENWIN7HOMEPREM64
      0A59833
SBB GEN WIN7 HOME PRM64 EN
      0A69642
SBB 12.5PRMHDLDBCLTDPYMBBBRDAN
      45M4574
VBB 8GBPC3-10600DDR3 1333SODMM
      45M4839
SBB KEYBOARDUS ENGLISH
      0A69643
SBB FINGERPRINT READER
      0A69657
SBB CAMERA, HD 720P
      0A69654
SBB 320GB HRDDSK DRV,7200RPM
      0A68287
SBB NO MSSDRIVE
      0A69647
SBB TP BATTERY 29++(9CELL)
      41W1787
SBB CPK NORTH AMERICA
      0A68261
SBB BLUETOOTH 3.0
      45M4805
SBB IN.CENTADV.-N+WIMAX 6250
      0A68257
SBB INTMBBRD GB3000 3G GPS
      44C7986
SBB SIM CRD ATNT: USA
      0A69659
SBB LANGUAGE PACK US ENGLISH
X220, IPS, Intel Core i7-2620m, 8 gb, Samsung 840 pro 256 gb, eGPU + Zotac AMP GeForce GTX 670.
Solved!
Go to Solution.

EvgenyP schrieb:
(in BIOS bluetooth option is "enabled")
In BIOS under "Security" - "I/O Port Access", too?
If it is so, press in the BIOS the keys Fn-F5 exactly one time (nothing visible will happen). End BIOS with F10 - yes and turn off the computer after the display backlight has turned off.
After starting the computer bluetooth should be active and the driver can be installed.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

How do I find out what is the current data rate on my wifi card?

I have a macbook pro running OSX 10.8.2. When I go to system profiler I see that the card is in 802.11n mode, but how do I find out the current rate? There is a 'Transmit Rate' parameter but there is no unit next to it.

The data rate depends on if it is using the 2.4 GHz band or the 5 GHz band, both are possible with n-protocol unless you have limited your wireless to only one band. The data rate in 5 GHz is double that in 2.4 GHz. Also, you have to know what the protocol of the network is, the AirPort card can only transmit at the rate of the network, so if you are on a g-protocol router, that is the fastest rate you can see.
And then interference, attenuation, etc. will drop that rate.

BT-183 bluetooth: how to adjust data rate?

Similar Messages

Maybe you are looking for