BT have blocked .webs domains.
Hi all
I have a website on a .webs subdomain which I can no longer access. I have just been informed this is because BT have blocked .webs subdomains. I have run a route tracer and can confirm the site is being blocked by BT. Having reported this to my domain provider, they have confirmed this is the case and have asked that I contact you in the hopes of resolving the issue. As I understand it a .webs domain was reported by the IWF, but this has no relevance to ALL .webs subdomains, and so you must please unblock them, or I cannot access my website, neither can anyone else which means I am losing money and customers as a result.
My website is http:\pixeliznation.webs.com
All other sites load fine, but this is defiatly being blocked by my ISP, BT.
Please can someone help to remidy the situation?
many thanks in advance.
Solved!
Go to Solution.
bibimaghoo wrote:
Hi all
I have a website on a .webs subdomain which I can no longer access. I have just been informed this is because BT have blocked .webs subdomains. I have run a route tracer and can confirm the site is being blocked by BT. Having reported this to my domain provider, they have confirmed this is the case and have asked that I contact you in the hopes of resolving the issue. As I understand it a .webs domain was reported by the IWF, but this has no relevance to ALL .webs subdomains, and so you must please unblock them, or I cannot access my website, neither can anyone else which means I am losing money and customers as a result.
My website is http:\pixeliznation.webs.com
All other sites load fine, but this is defiatly being blocked by my ISP, BT.
Please can someone help to remidy the situation?
many thanks in advance.
Hi. Welcome to the forums.
May I ask who said that BT had blocked the webs.com sub domains ?
Apart from the typo in the URL, I can't actually get to your (gaming) site, but I can access it via a proxy by somethng like www.proxify.com
Something seems to be wrong with it at present as I've tried other webs.com sites. However as you've mentioned the IWF - then that is something else altogether.
Are you aware if this affects other users on different ISPs ? If that is the case, then it's not a BT problem I'm afraid.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures
Similar Messages
-
Hi i am working on my web site and it appears to have blocked the ip from my server i can't open my web sites and i cant open the server home page but can do this on my iPhone i have trend micro running on 2 other desk tops all from the same router please help maybe its a firewall? Cheers Dave
All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
Have Homestead Web site want to transfer domain to Iweb
I have a Homestead Web Page account that is not compatable with my Mac, so I want to switch the domain name www.curtisphoto.org to IWEB, how do I do that??? thanks, Ruth
Hello Ruth,
Please correct me if I got it wrong.
Homestead is the Host of your current website,
and you have your personal domain name linked to your website on Homestead.
You would like to have your website on an other Host,
and link your personal domain name to your website on this new host.
If so,
Where did you buy your personal domain name ? Is it also at Homestead or an other Registrar ?
Most Registrars let you control your personal domain name via a web interface.
In any case, you would want to have your website up and running on the new Host before you change your personal domain name to the new Host.
Should you encounter any problem with redirecting your personal domain name to your website on the new Host, let us know.
Kind regards,
Leo -
How do I whitelist a Web domain in Internet Explorer 11 (Win 7 OS)?
I want to whitelist a Web domain in Internet Explorer 11. That is, I want a searcher using IE 11 to be able to go to only one website and have all other sites blocked. We are in a public environment and I don't want users going to Facebook, etc. The solution
has to make provision for whitelisting the Web domain in such a way that all URLs below it are not blocked. I thought I had a perfect solution using a PAC file. Next, I want to be able to whitelist two URLs so will need the syntax for that, too. I look
forward to hearing from someone on this topic. I have spent two full days combing the Web for a solution. Thanks.Hi,
I want a searcher using IE 11 to be able to go to only one website and have all other sites blocked.
For me, if I only want the user search on one website, then I would set a proxy to 127.0.0.1, then add a proxy extension to bypass the specific web address, as shown below:
If you want to configure PAC file, then I would suggest to the following two guide to create the pac, anyway, a pac is more flexible.
http://blogs.technet.com/b/emeaie/archive/2013/11/04/optimizing-performance-with-automatic-proxyconfiguration-scripts-pac.aspx
http://technet.microsoft.com/library/Dd361950
Yolanda Zhu
TechNet Community Support -
I wonder why you block my domain and my homepage/blogg. This site don't contain anything dangerous at all. It is only about me, my family and friends. You are THE ONLY BROWSER that block it. And I wonder why you do it.
All the best
Rose Jenny Wahlberg
www.bluerose.no
Cellphone: **** *** ** ***
mail: ****@********.**It is not the Firefox browser nor Mozilla that is doing the blocking but rather Google safe browsing.
http://www.google.com/safebrowsing/diagnostic?site=http://www.bluerose.no/
What is the current listing status for bluerose.no?
Site is listed as suspicious - visiting this web site may harm your computer.
Part of this site was listed for suspicious activity 6 time(s) over the past 90 days.
What happened when Google visited this site?
Of the 2 pages we tested on the site over the past 90 days, 2 page(s) resulted in malicious software being downloaded and installed without user consent. The last time Google visited this site was on 2011-08-26, and the last time suspicious content was found on this site was on 2011-08-26.
Malicious software is hosted on 1 domain(s), including imgddd.net/.
This site was hosted on 1 network(s) including AS34989 (SERVETHEWORLD).
Has this site acted as an intermediary resulting in further distribution of malware?
Over the past 90 days, bluerose.no did not appear to function as an intermediary for the infection of any sites.
Has this site hosted malware?
No, this site has not hosted malicious software over the past 90 days.
How did this happen?
In some cases, third parties can add malicious code to legitimate sites, which would cause us to show the warning message.
Once you get the issue fixed you can then have Google check and remove. http://www.google.com/safebrowsing/report_error/ -
SSL VPN message "This (client) machine does not have the web access privilege."
Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
network 192.168.0.0 255.255.255.0
default-router 192.168.0.1
dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
heading "My Intranet"
url-text "Cisco" url-value "http://192.168.0.2"
url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
url-list "MyServers"
functions svc-enabled
svc address-pool "sslvpnpool"
svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan -
WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions
I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue. NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).
Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
This is the 2nd time it happened with 2 different models.
Please help ASAP.
Thank you,
Lance
(Mod note: Edited post. Some parts off topic.. Thanks!)Also, you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
-
hi All,
i have one of the requirement for an application, we do upload some release not in file server and that is used in application link to see the note. in this note i have converted the Excel into .HTM format(web page). this was working fine, but from last
two days all of a sudden we are recieving error as above.
one or more ActiveX controls could not be displayed because either:1 your current security settings prohibit running ActiveX controls on this page, or 2. You have blocked a publisher of one of the controls.
could anyone please help me on this.
Thanks and Regards,
krishnamurthyHi,
Actually Arnavsharma provided a operable method for you. But no luck, it's not invalid.
Here I also offer you an method you can try.Please delete the extra (parasite) zone from the Zones subkey :
Click Start , click Run , type regedit , and then click OK
Expand the following registry subkey
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones
Delete the extra (parasite) zone from the Zones subkey
Note: The parasite zone is a pseudo-graphic number listed before zone number 0. The pseudo-graphic number looks like a miniature upper case "L"
Close the registry editor
Thanks!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I used to have a web page in mobile me and now is closed. How can I get my webpage data back?
Your web pages on MobileMe have been deleted. If you were using iWeb you wouldn't have been able to open them anyway.
As long as you have the iWeb 'Domain' file in your user Library, or whatever the program you are using stores the information in, on your Mac you can publish to another hosting service - there are plenty to choose from. More information here:
http://rfwilmut.net/missing2 -
From external: block all domains except one MAPPINGS file?
Here's the problem...
I have an old domain that my mailserver is still authoritive for. We receive mail through a mail ISP cluster, in that sense that our internal mailserver does not have any MX-records associated with it. All MX-records point to the ISP.
We have recently changed domain name because of a merger.
I am still rewriting all RCPT TO: [user]@olddomain.com to RCPT TO: [user]@newdomain.com in imta config.
I now want to end that rewriting using the mappings file for all except but one domain.
So the end result should be:
MAIL FROM: all domains -> [user]@olddomain.com REJECT $Netc......
but!
MAIL FROM: specific domain -> [user]@olddomain.com should still be passed on to the IMTA.
I have used SEND_ACCESS before as a method of blocking mail, but this is specific... I want to block the whole world except one originating domain (for the old domain)
Does anyone have a working example of this and could you provide it for me?
TIA
EliJay :-)
We have reinstalled iPlanet Messaging Server 5.2 on Windows Server using all new servername FQDN and all new domain hosting for.
FQDN: mail.new-domain.local
Mail authoritive for: new-domain.com
Server is located on the LAN and gets it's mail from an ISP using mailkick.
Server is actually not aware (neither in MX, nor in LDAP records) of the old domain.
The only way the server gets it's mail is through smart-hosting. It just works and acts as a new server. Mail for the old-domain.com (organization) is accepted because I rewrite the domain part of the old-domain.com to new-domain.com
old-domain.com $U%[email protected]
Server accepts mail from all sending/origination domains only for the TO: new-domain.com it is authoritive for.
Now here is the catch... I want to disable the TO: domain-rewriting, because people need to use the new-domain when addressing us.
There is still only ONE organization out there that needs to address the old-domain.com because of X.509 encrypted mail. This is the only domain I will do rewriting for.
Hence is why I was looking at the SEND_ACCESS
It has some ways of blocking part of a sender or address part of a enveloppe based on wildcards etc....
Yet only blocking....
How do I block the whole world except that old organization we still do business with. Mail for the old domain is also delivered through the same mailkick by ISP.
So if whole world -> [some user]@old-domain.com REJECT
and
single organization -> [some user]@old-domain.com ACCEPT and continue REWRITING
Hope I shed a bit more light on the subject....
Eli -
Java: Your security settings have blocked an untrusted application from running
I keep getting the error "Your security settings have blocked an untrusted application from running" when trying to access the Web Interface of an HP printer....I don't know the model of the printer since I cant get into it, but it does say HP. I am trying to access it using IE 11, but also tried it in chrome and it is saying "The Plugin is not supported".
I have updated Java, went into the Java control panel > Security tab > Added the printers IP address to the exception list. I still get this error. Can't turn the Java security lower than High anymore....there just isn't an option for it. I have had this happen on multiple printers before, and Google hasn't helped so far, figured I would ask you all while I continue my search.
Anyone else run into this?
This topic first appeared in the Spiceworks CommunityI'm not sure anyone here knows more about the Java plugin than you do...
Were you starting the control panel from disk as administrator because it didn't work starting it through the Start menu (if you have Control Panel set to View by Category, the Java control panel is under "Programs"). -
I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.
iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host. -
I have blocked a sites for view the picture. But I want now to view the picture from this sites. How do I unblock the site again???
With the site on display, click on the site identity button (for details on what that is see [https://support.mozilla.com/kb/Site+Identity+Button]) and then on More Information. This will open up the page info dialog.
First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
This should hopefully resolve your issue, but also see https://support.mozilla.com/kb/Images+or+animations+do+not+show
Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images. -
Use only IP-number and skip web domain name?
I have a Mac Mini Server and I am about to order an external firewall device. The firewall will be used with vpn to get access to the server from the internet. Access to the server will only be for my colleages . The server should not be accessible for other people at all (e.g., no public website, etc).
Here comes my newbie question…is it possible to only use my static public IP number to get access to the server through vpn? Do I really need a a web domain name?
Do I really need to get dns involved on the outside?
At the moment I am using my servers Wiki and blog by typing in the IP-number in the browsers address field. It would be fine with with me to continue with that.is it possible to only use my static public IP number to get access to the server through vpn? Do I really need a a web domain name?
Sure. if you can remember your IP address you can use that anywhere. DNS exists because there are literally millions of IP addresses out there and human brains are better at remembering words (e.g. 'discussions.apple.com') than they are numbers (e.g. '64.212.100.59').
Do I really need to get dns involved on the outside?
Since it's only you and your colleagues, not at all.
At the moment I am using my servers Wiki and blog by typing in the IP-number in the browsers address field. It would be fine with with me to continue with that.
It's also not hard to setup a local DNS for your internal systems - once you're connected to VPN you'd automatically start using the internal DNS server and would be able to use memorable names, but it's entirely your choice. -
I have blocked plug-in. I cannot download Adobe flashplayer
I have blocked plug-in. Cannot download Adobe Flashbplayer. cannot access bridgebase.com
Hello eadesgirl,
Thank you for visiting Apple Support Communities.
It sounds like you are experiencing a "blocked plugin" message on your Mac when viewing certain web sites.
To address this situation, be sure to follow the steps mentioned here:
Adobe Flash Player updates available for OS X on December 12, 2014 - Apple Support
If you're using an out-of-date version of the Adobe Flash Player plug-in, you may see the message “Blocked plug-in,” “Flash Security Alert,” or “Flash out-of-date” when attempting to view Flash content in Safari.
Clicking the indicator displays a message that Adobe Flash Player is out-of-date:
To continue viewing Flash content, update to a later version of Adobe Flash Player:
Click the Download Flash button. Safari opens the Adobe Flash Player page on the Adobe website.
Follow the instructions on the Adobe website to download and install the latest version of the plug-in.
If you need to use an older version of Flash Player, you can use Internet plug-in management in Safari to run the plug-in in unsafe mode for websites that you trust.
Contact Adobe if you need help downloading, installing, or using Adobe Flash Player.
Sincerely,
Jeremy
Maybe you are looking for
-
I would like to use my apple id for all my mail how would i do this
i would like to use my apple password for all my mail.
-
That's great I can see my iCloud calendar in Outlook, but I can't see my Outlook calendar in iCloud. Any ideas on this one? I don't want to copy the calendar into iCloud, because they wouldn't be in sync. How do I view my Outlook calendar in iCloud s
-
After applying custom keystore in weblogic admin_server, server is not get started
Hi All, (Thanks in advance) I have a big problem now. I applied the SSL configuration to weblogic and OBIEE. It was working fine with Demo Keystore. After creating selfsigned keystore and applying to weblogic admin_server, the server get shutdown and
-
ThinkPad Button A31 Download AIBM.EXE
I'm rebuiding my A31 and want to get the ThinkPad Button working. I have all the OSD, WebKey Agent and Zoom drivers installed. The key calls c:\IBMTools\AIBM.exe. Does anyone know where/how to find this file and download it? I don't have the file on
-
Contribute 6.5 start page not showing connections
I am using Contribute 6.5. When I opened the program today, none of my connections are showing on the start page. However, they do appear in the drop down list under home pages. My clients are reporting the same phenomenon. Any idea what might be goi