BT HH5 online connection issue (NAT)

Hi,
I found out that I was getting a moderate NAT type on my PS3 (NAT type 2) which didn't let me play GTA online at all. A friend of mine also had the same problem and he has HH5 aswell. I've tried to port forward my ps3 and GTA online and it would just not let me to, gives me that error where it says "The game or application you’ve selected conflicts with an application ()" I usually use Wi-Fi and since it doesn't let me go online, I tried using Ethernet cable and still no difference. I tried A LOT of things and still no luck at all. I've had absolutely no problems when I had Home Hub 3, but HH5 is just annoying and a waste of time and money. Can you please fix this?

The NAT on CoD AW can be open one day and moderate the next for me.
I just don't think the HH5 is any good.

Similar Messages

BT Infinity HTTPS connection issues- anyone else?

Hi all.
Any advice would be greatly appreciated.
I have been having considerable problems with HTTPS sites over the past few months - timing out, unable to make payments online with ClickSafe - Lloyds Bank, Natwest, NEXT, National Lottery. Some HTTPS sites load eventually but usually very very slowly or time out.
This issue is across all my devices - Macbook Pro, iPad Air, Samsung Tablet, Windows 8 Laptop, x3 iPhone 5.
If I switch WiFi off on my iPhone I can make payments over the mobile phone network fine but as soon as I switch WiFi on the problems occur again. I took my Laptop to a friends house and used their TalkTalk Broadband and no issues, all worked fine.
I have had 2 HH4 and now a HH5 and the problem still occurs.
I have Changed numerous settings, undertaken numerous reboots and complete resets to no avail.
I have enabled firewalls and disabled firewalls, changed MTU and numerous other possible fixes, but again none have worked.
I have paid for BT Tech Expert support who have been very helpful and always called back when they have said they would but they do not know what the problem is and are still working on it. Next call on Monday night.
I found this very long thread starting in 2011 and ending in February 2013, where BT customers were experiencing the exact same problems in the South West of England and it turned out to be a network issue that was resolved but it does not explain how it was resolved!
https://community.bt.com/t5/BT-Infinity-Speed-Connection/BT-Infinity-and-https-connection-issues/td-...
I am in Newcastle upon Tyne and would be grateful if anyone could let me know if they are having the similar problems?
Thanks for your help.
BT Infinity 2 - 75/16 Mbs

To make sure that BT web help is disabled, look here.
http://preferences.webaddresshelp.bt.com/selfcare/
To try changing DNS server on your Windows 8 laptop, see this Microsoft note.
http://answers.microsoft.com/en-us/windows/wiki/windows8_1-networking/how-to-change-ipv4-dns-server-...
You can use 8.8.8.8 as they suggest, as that is Google public DNS.
If that fixes the problem on the laptop, it would point to a problem with BTs DNS servers.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

The Game Center is "unable to load data due to network connectivity issues or errors".

The Game Center is "unable to load data due to network connectivity issues or errors".
My internet is fine: all other apps that do not rely on the Game Center work, as does my browser and other online functions; additionally, a friend's iPhone connects to his Game Center perfectly while he is sitting next to me.
Closing the Game Center app and then reopening it is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then logging back in, and then reopening the Game Center is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then reopening the Game Center app and logging back in from there is ineffective.
This issue has gone on for more than a month, and so the phone has gone through all variations of "turn it off then back on again, refresh the system, etc etc" that are the basic first suggestions for trouble shooting.
One game app, which required a Game Center profile to launch, stopped working entirely, and would return a message saying something like "connect to the Game Center". I eventually deleted it to free up space. Other games which can be linked to the Game Center to connect with friends simply fail to link, returning "Game Center unavailable". This is the aspect that is currently bothering me the most: I cannot play games with friends unless the app can also link to Facebook and connect to friends from there.
When I open the Game Center, I see the following screen. The bubbles float gently, and it seems as if I had the ability to update my "status". However doing so results in a message that has vanished once the app is reopened.
Upon tapping Games, either the bubble from the main screen or the option on the ribbon at the bottom, the following screen appears. Clicking on Challenges shows a message that achievements must be viewed to issue a challenge. Clicking achievements results in a message that games must be connected (and from my friend's phone I know I have several apps that should appear).
Upon tapping friends, it does show me a list of suggested friends pulled from Facebook, but attempting to send a friend request results in the following screen. After accepting the error box, the "send" button for the request is grayed out and unavailable regardless of adding or deleting friends and/or an accompanying message.
In short, the Game Center is completely unresponsive for no discernible reason, and this problem began with no warning and is now long term. Though my iPhone is older (a 4s), my friend's is even older (a regular 4) and works fine.

I am having the very same problem on my iPad running ios 7. All is fine on my iPhone it opens no problem - this is running on ios 8. I wish they would fix it.

BT Connection Issue

I've recently moved home and have transferred my BT connection, however I cannot get a broadband connection.
I've tried both the BT homehub (HH3) and my original router (Netlink) and neither can connect. I've changed the cable connecting the filter to the router and different ADSL filters.
I've gone through the connection issue checklist and have checked the line using the online option (no fault detected). There are no faults detected in my area and I do not use McAfee.
I've tried both my original username and password and the default one.
The broadband helpline number (0800 111 4567) just leads me in circles, referring me back to the order confirmation menu (order completed on the 23rd).
Is there something obvious I'm missing, or do I need to try harder to get hold of BT?
Solved!
Go to Solution.

It does sound like an authentication or misconfiguratuion somewhere, but there is nothing I can do as BT customer.
If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to find the problem.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

HH5 won't issue DHCP addresses to new devices

My HH5 has stopped issuing DHCP addresses to new wifi devices. It not a problem on laptops etc, as manually entered addresses work but it's a no go for smartphones. Existing wifi devices continue to work ok.
I've reset to factory settings twice with no luck but trying another router linked to my old white VDSL modem works fine.
Anyone have any ideas?
Thanks, Roger

This is not a large scale deployment.
If you want to test & see the difference you can create DHCP pool either on your DHCP server or WLC connected switch.
It does not make sense defining DHCP at different places if you have a proper DHCP server. (typically WLC DHCP use for guest services where WLC placed in a DMZ where no direct connection with other corporate services & from security perspective you do not won't to mix these traffic with your corporate traffic)
HTH
Rasika
**** Pls rate all useful responses ****

Connectivity issues after 8.1.1 update please help! :(

Hi all. Here's the situation.
I got my Iphone 6 on release day.
Not had one single problem with it.
On Monday however I do a general software update to IOS 8.1.1
Now ever since then I cannot keep a steady connection to both WIFI AND my roaming internet.
BOTH show as connected however load EXTREMELY slowly or not at all. No matter where I am.
I have done a soft reset.
Switching on and off.
And resetting Network Settings.
Done all these 3 or 4 times and they are not helping.
It is too coincidental to not be because of the software update.
Can someone please help me?

Still no help for you? I updated my iPhone 6 to 8.1.1 this past weekend and now have huge connectivity issues too. My home WiFi signal is 5 bars but runs very slow for example Facebook, the phone cannot update messages or photos. Try to connect for online banking, forget it. I have turned off WIFI and try using my Verizon signal which is 3 out if 5 bars, same problem. Don't understand why Apple cannot fix this apparent bug. Will call Apple Care in a few minutes and let you know what they say.

Skype For iOS 7 Is Not Staying Online (Connected) ...

As of today, Skype does not stay online/connected and able to receive calls after being minimized for a given period of time.
PROBLEM: I have updated to the latest version of iOS 7 and have the latest version of Skype for my iPhone 4S. While I notices a few improvements I have an even bigger issue now. Skype will not stay onine/connected to the internet and standing by to take phone calls.
It does not take long after minimizing Skype that it goes into some dormant state that either iOS is putting Skype into or Skype itself is simply not working as it should and keeping itself awake. It is not immediate after minimizing Skype but I can say it does not take longer than 10 minutes.
If you have the SOLUTION please post, otherwise keep the restart and reinstall suggestions out.

Registered here to confirm the same or a similar issue here too, as it seems they could be related. If I lock my phone, but allow Skype to continue running in the background, it seems to work perfectly fine for a while. My contacts see me as online, and I can still receive text and incoming call notifications.
However, if I leave it for a while, my contacts see me as offline. From what I understand, if they attempt to call me or message me while I'm appearing in this offline state, they will still be sent to my iPhone and I'll receive them as normal - however it's impossible for my contacts to be able to tell if I'm really there or not since I'm appearing offline.
I'm not sure how long it takes from locking the phone to this issue occuring, but it seems to be perhaps around an hour to two hours. I would just wake up my phone every now and then, but since my contacts are in different time zones and I may be asleep when they wish to call, I can't always simply repeatedly wake the phone up.
If I do manually switch back to the Skype app while it is in this offline state, I notice it will either refresh my contacts list when the app is opened, or it will display the "Signing In" screen briefly before returning to my contacts list - as if the app is going offline or being halted in the background, and when I manually switch back to it, it's being forced to "wake up" again.
Now, my settings already have me set to "Go Offline: Never". I've deleted and reinstalled Skype already. The phone has been reset several times. It looks like something that may need to be looked into further by the Skype team as it seems to be a potential issue - the "Go Offline: Never" preference isn't working as expected under iOS 7.
My device is an iPhone 4S (16GB) running iOS 7.0.3. It's almost always connected to WiFi and Background App Refresh is enabled (whether the last one has any relevance is beyond me, but some app devs have had issues with it so I figured it was worth mentioning in case).

Connecting Issues

I currently have DSL access with a Westell A90-750015-07 router and a Cisco wireless adapter. I seem to have issues connecting at times to the Internet, especially since we had a recent storm. One night I'm able to get on, the next I can't. And when I am able to go online, it is usually after several tries. My computer is in the bedroom and the router is in the kitchen, which may have something to do with the connection issue because there is not a closer jack.
Usually what I end up doing is turning off the computer, restarting, or shutting down completely, turning off the router and taking the adapter out and turning back on. Usually I could then get back on, but seems a hassle.
Since I got on now, the connection has stayed on, thankfully. Sometimes it goes while I'm on, then will come back on. It's a pain because it's been like this consistently.
I have a networking cable, however, it's been a while since I used it. Verizon's Technical Support helped me the last time. I'm not sure if something needs to be reconfigured since the storm so this does not keep happening. They did something while the cable was plugged in, then I was able to go back to using the wireless adapter to connect. I don't suppose anyone would have instructions. I'm also unsure which one it gets plugged into. I believe it's Ethernet on my HP desktop, but on the router I'm unsure which one it goes into, like E1/Uplink, E2, E3, or E4/Data. I tried earlier with all of them, even turned the router off, then would restart the computer but nothing happened.
Any guidance would be much appreciated.
Solved!
Go to Solution.

Ok.
#1 An original or very old style NID with a spark gap and ground wire can even get spiders in it that could cause an issue. Inspect the NID first before thinking of changes or wiring.
http://en.wikipedia.org/wiki/Network_interface_device
http://en.wikipedia.org/wiki/Demarcation_point
Running a good quality wire CAT5, no need for CAT6, directly to the NID for the DSL modem jack may help. That is what I had done with mine. Depending on the number of loads or amount of wire in the house could also cause issues. But if the user's signal quality is not being pulled low due to a wiring issues, it would usually indicate a problem elsewhere. Unless there was noise being picked up on the premises wiring. Wire DSL directly to the NID and install a filter there for all other in house wiring may help. There used to be available what was called a NID Filter, and I am sure you can still get them.
Ideal Connection if house wiring is an issue, or very old, and lengthy. Install a filter / splitter at the NID.
Run CAT5 directly to the NID location, and install a dedicated jack for the DSL modem.
Remove all in house wiring from the NID.
Connect piece of CAT5 from the NID to the filter / splitter input
Connect all existing phone lines to the phone side of the filter output.
Connect the new DSL CAT5 directly to the NID before the filter / splitter, or to the DSL side of the filter / splitter, depending on the device purchased.
This will take all the existing premises wiring out of the picture unless there is a short circuit or excessive load somewhere in the house.
At this point all the single filters could be removed because the DSL is filtered at the NID.
http://www.homephonewiring.com/dsl.html
#2 You can test outbound to Giganews. But giganews has/had a test that will check your inbound connection from their servers to you.
I heard from another user that
Giganews is being watched very closely because of multipart binaries, and pirated material. MP3s and Video Content. 7 years ago you could get 10-20 MP3 albums in a single day, and that was with a 15/5 fios connection. So they started providing an encrypted connection service for an added fee. I have not messed with news groups for a very long time. Now with deep packet inspection, and other enforcement, I would not even think of it. No news I want there. But there may be content that people want? They may even be checking and limiting speed from that domain. Never tested. But let me see. It looks as if reverse trace routes and speed tests are being blocked by Verizon from Giganews to my router.
        Reverse Traceroute
        Tool news.giganews.com
        traceroute to *.*.*.*, 30 hops max, 60 byte packets
        1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 0 ms 0 ms 0 ms
        2 te0-0-0-7.mpd22.iad02.atlas.cogentco.com (38.122.67.49) 0 ms 0 ms te0-7-0-9.mpd22.iad02.atlas.cogentco.com (38.122.62.193) 0 ms
        3 te0-0-0-4.ccr21.iad02.atlas.cogentco.com (154.54.31.105) 0 ms 0 ms te0-2-0-0.ccr21.iad02.atlas.cogentco.com (154.54.31.101) 0 ms
        4 uunet.iad01.atlas.cogentco.com (154.54.13.138) 28 ms verizon.iad01.atlas.cogentco.com (154.54.10.226) 40 ms uunet.iad01.atlas.cogentco.com (154.54.13.138) 28 ms
        5 0.ae1.RES-BB-RTR2.verizon-gni.net (152.63.32.157) 41 ms 41 ms 0.ae2.RES-BB-RTR1.verizon-gni.net (152.63.34.22) 13 ms
        6 * * *
        7 * * *
        8 * * *
        9 * * *
        10 * * *
        11 * * *
        12 * * *
        13 * * *
        14 * * *
        15 * * *
        16 * * Max number of unresponsive hops reached (firewall or filter?)
#3 Have the provider run a local loop test to see if any problems are indicated. If there are, then they could run the test with everything in the house disconnected, except the new DSL modem connection. If issues are still indicated, then the DSL provider needs to make connections on the local loop. Another user told me that they had issues when it rained, and it was because construction had left a splice box open on a line somewhere.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Connection issues on Iphone 4

Is Iphone 4 or verizon currently having connection issues? I have never had an issue before, but today every call I make either drops the moment the other person picks up, or I can hear them but they cannot hear me. This happened to me over 10 times today while calling 5 different people. I then tried to use my fiancee's phone to make the call (she also has an iphone 4 and verizon but is not on the same plan as me), but the same thing happened from her phone. We are in the Cincinnati OH area and have never had these issues while calling from the same location.

You may wish to rely on G networking. G and N on the i4 are 2.4Ghz frequencies. G network is more reliable for the most part as 90% of places you visit or utilize are G related.
N is fairly new and is used for online games and a few other things. However since you have 2.4Ghz N chips, this can cause signal degredation.

N1KV - Connectivity issues

Hi all,
I am trying to bring up my first N1KV in a lab environment and I am having some weird connectivity issues. Hope someone can help !!
I've been working together with our VM team and we have the following installed and configured. We have ESX 4.1 installed on an HP DL360 G7 with 4 NIC's and the VMNic's are assigned as follow.
- vmnic0 to vSwitch0 with the following portgroups (Service Console, N1KV-Control, N1KV-Mgmt, N1KV-Packet and VMKernel) and all portgroups are in the same VLAN.
- vmnic1 to vSwitch1 for vMotion traffic
- vmnic2 to vSwitch2 for VM data
- vmnic3 to vSwitch3 for VM data
I have VSM and VEM version 4.2(1)SV1(4) installed on the same ESX host and connected to vCenter with the following port-profile and svs-domain configured. I am using L3 mode for VSM and VEM communication I believe this is what Cisco recommends going forward.
port-profile type ethernet system-uplink
vmware port-group
switchport mode access
switchport access vlan 7
no shutdown
system vlan 7
description ServiceConsole-Contrl-Packet-Mgmt
state enabled
port-profile type ethernet vMotion-uplink
vmware port-group
switchport mode access
switchport access vlan 21
no shutdown
description vMotion uplink
state enabled
port-profile type ethernet W0AA0159-VM-Data-Uplink
vmware port-group
switchport mode trunk
switchport trunk allowed vlan 8,99
channel-group auto mode active
no shutdown
description W0AA0159 VM Data Uplink
state enabled
port-profile type vethernet VM-Data-VLAN8
vmware port-group
switchport mode access
switchport access vlan 8
no shutdown
description VM Data VLAN8 Server Farm
state enabled
port-profile type vethernet VM-Data-VLAN99
vmware port-group
switchport mode access
switchport access vlan 99
no shutdown
description VM Data VLAN99 Web-App Server Farm
state enabled
port-profile type vethernet vMotion
vmware port-group
switchport mode access
switchport access vlan 21
no shutdown
description vMotion
state enabled
port-profile type vethernet System-Console
vmware port-group
switchport mode access
switchport access vlan 7
no shutdown
system vlan 7
description vMotion
state enabled
port-profile type vethernet L3vmkernel
capability l3control
vmware port-group
switchport mode access
switchport access vlan 7
no shutdown
system vlan 7
state enabled
svs-domain
domain id 101
control vlan 1
packet vlan 1
svs mode L3 interface mgmt0
Here is my problem:
When I move vmnic0 to the system-uplink port-profile with N1KV-Control, N1KV-Mgmt, N1KV-Packet map to System-Console port-profile, and VMKernel maps to L3vmkernel port-profile, all seems to work fine at this point. I can see the VEM comes online and all is good. But when I start moving the second vmnic over (either vmnic1, vmnic1 or vmnic3 don't matter) all hosts got disconnected, vCenter shows all hosts disconnected. And the only way to bring the environment back is to log into ESX and run ESX commands to delete and recreate the vmnic's then map them back to vSwitch.
Has anyone ran into this issue before ? Could it be that vmnic is assigned to the vSwitch that you can't move it over to the N1KV ?
Thanks in advance !!! I appreciate any inputs / suggestions !!!
D.

Hello,
We need additional information to further investigate this behavior. Please open a TAC service request with following logs after re-creating the issue.
VSM log file ( SSH session output file )
show tech-support svs | no-more
VEM log bundle
SSH into ESXi host and execute " vem-support all " command
Padma

Persistent WiFi/AirPort connectivity issues

If anyone has any input that could help me or perhaps reduce my ignorance, it would be much appreciated.
My Black MacBook has had persistent wireless connectivity issues since I purchased it almost 2 years ago. Even when it shows 3 or 4 bars in my AirPort preferences, it has rather slow page-loading abilities.
For some reason, if I keep selecting my preferred network from my AirPort menu (even when it has NOT dropped the network), that tends to speed up my page load rapidly, but only for a couple of seconds.
It fares a little better when connected directly with Ethernet, but still pretty poor, to the point that I am often mocked by my PC-using friends.
Is there a software update I need? Or a network accessory I can purchase? Or can I replace my built-in wireless card? I am open to anything at this point. Thanks in advance,
K.
Message was edited by: newtomac1553
Message was edited by: newtomac1553
Message was edited by: newtomac1553
Message was edited by: newtomac1553

Have you tried connecting directly to your router with an Ethernet cable to see if wired performance is significantly better than wireless? I don't see any other inexpensive solutions.
Spending several hundred dollars or more to upgrade your home router and adding RAM and a new hard drive two-year-old computer is certainly cheaper than buying a new computer outright, but it DOES NOT give you any guarantee of the faster online and video performance you seek.
An 802.11 'n' router (with a gigabit wired connections) would probably help connection speed, IF you have a high-speed internet provider with one of the faster DSL or cable services. The fastest 'n' routers provide up to 300Mbit/sec transfer rates, compared with 54Mbit rates for most of the 'b/g' routers, and some higher-end routers (like the Apple AirPort Extreme) support dual band MIMO for multiple simultaneous connections by the same computer, which provides a potential for greater performance. Stop by an Apple store and ask for a demonstration _with your MacBook_ to see if you experience a enough difference to justify the expenditure.
You have to click the "triangle" after the Intel ICH8-M AHCI to see the detailed drive information dropdown. You seem to have plenty of hard drive space available, but I'm guessing you have a 5400 rpm drive. Upgrading to a 7200 rpm drive would help overall system performance some with faster read and write times, but you really don't need extra space at the moment.
Upgrading to 4Gb RAM could also help if you run lots of programs simultaneously, but might not provide noticeable gains for browsing and online video, since you're already at 2Gb.
Of course there is not an upgrade to the GMA 3100 chipset and 144Mb of video ram. It is better than my GMA 950 with 64Mb, but not as good as newer/faster/better MacBook and MacBook Pro models with faster microprocessors and more sophisticated nVidia video chipsets from Apple.

Connectivity issues between Cisco 2901 and Cisco SG300-52

Hello,
I am having some serious connectivity issues between the hosts in my LAN.
My LAN is based on a Cisco 2901 router and a Cisco SG300-52 port switch.
The issue that has been happening is that connections between hosts on the LAN (remote desktop, extended ping, etc) is very unstable, at some point I can see a 35% lost packets on an extended ping. This happens at any time of the day and from any host.
All hosts are on the same Vlan(default Vlan) and on the same subnet. Some hosts have fixed IP addresses (servers and network equipment) and others obtain their IP address trough a DHCP reservation established on the router (reserved with the MAC address of every host).
I can provide further details if needed, because this issue is very serious and I would really appreciate any insight or support.
Many thanks in advanced.
Sair Amer
EDIT: After doing every test we could think of, we finally found the reason behind this problem.
It turns out that the switch has problems handling communications between clients at different speeds, because most of the hosts connected were working at 100 Mbps but the servers were working at 1000 Mbps (and the communication between host and servers wasn't stable).
After manually setting the speed on all ports to 100 Mbps the problems have stopped.
Many thanks for you help on this issue.

Building configuration...
Current configuration : 4123 bytes
! Last configuration change at 12:06:16 PCTime Sat Jul 19 2014 by ccp
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Foninsa
boot-start-marker
boot-end-marker
no logging buffered
enable secret 5 $1$BDbJ$HN3VP8nmywrGB55RCxPd30
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone PCTime -4 0
clock summer-time PCTime date Apr 6 2003 2:00 Oct 12 2003 12:00
no ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp excluded-address 192.168.1.151 192.168.1.255
ip dhcp pool FONINSA
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 8.8.8.8 8.8.4.4
ip dhcp pool Laptop-Sporta-Wifi
host 192.168.1.10 255.255.255.0
ip name-server 8.8.8.8
ip name-server 8.8.4.4
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-213585710
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-213585710
revocation-check none
rsakeypair TP-self-signed-213585710
crypto pki certificate chain TP-self-signed-213585710
certificate self-signed 01
30820229 30820192
quit
license udi pid CISCO2901/K9 sn
license boot module c2900 technology-package securityk9
username ccp privilege 15 password
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 190.196.21.98 255.255.255.248
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
no ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/0 overload
ip nat inside source static tcp 192.168.1.3 21 190.196.21.98 21 extendable
ip nat inside source static tcp 192.168.1.3 80 190.196.21.98 80 extendable
ip nat inside source static udp 192.168.1.8 1194 190.196.21.98 1194 extendable
ip nat inside source static tcp 192.168.1.4 3389 190.196.21.98 3389 extendable
ip nat inside source static tcp 192.168.1.9 3389 190.196.21.98 10000 extendable
ip nat inside source static tcp 192.168.1.3 3389 190.196.21.98 20000 extendable
ip route 0.0.0.0 0.0.0.0 190.196.21.97
access-list 1 permit 192.168.1.0 0.0.0.255
control-plane
line con 0
password $
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 5
access-class 23 in
privilege level 15
password #
transport input telnet ssh
no scheduler allocate
end

XBOX 360 CONNECTION ISSUES

As I am a avid gamer on xbox360 I have noticed the following I have connection issues when I play black ops lag is terrible and thinking that this may be due to th e games servers so I tryed modern warfare2 and yet this is the same now bearing in mind whwn I was with Talk Talk this issue very rarely occured...so why now I wonder?....I have the new HUB 3 I have tryed PORT forwarding and this is still no better IF anyone has any advice on this I would appreciate it very much...........

hi
there could be several issues here...
when gaming online, sometimes the lag may NOT be your fault (or your ISP i should say).
if you are on infinity, then upload is minimum of 2mbps so around 1.6meg in real terms which is more than enough bandwidth for online gaming.
however, LATENCY, is the main player here.
it doesnt matter if you have a 10mbps upload connection if your latency is very high but to be honest, even at worst, i dont think you should be getting in excess of 40ms to anywhere in the UK...
i am an XBOX gamer on Infinity and i use wireless to my HHB3 and have never encountered any issues so far (touch wood)...
As you say your are using a wired connection, then im assuming you mean XBOX directly wired into hub. If this happens with ALL of your online games, then maybe try resetting your hub/router and try again and double check any port forwarding you may stipulated. Maybe even try using another ethernet cable?
again, i have Infinity/HHB3 with no issues at all with online gaming, even via a wireless connection. If i did, then i would consider placing my XBOX in DMZ whereby it is beyond the firewall so should eliminate any firewall/port forwarding issues.
Since you say that the problem only apparent since changing providers, then i would concentrate efforts on the router/hub and your local connections to that device...its unlikely its anything to do with broadband itself, but more to do with your connection to it.
ged

Satellite U940 PSU6VA - Wireless connectivity issues

_*My specifications:*_
*Model:* Toshiba Ultrabook (Satellite U940 PSU6VA-00S002)
*Operating System:* Windows 8.1 x64 (upgraded from Windows 8 x64)
*Wireless adapter:* Intel(R) Centrino(R) Wireless-N 2200
*Wireless adapter driver version:* 15.10.0.12 (which is the latest for my device)
I have had this Ultrabook since February 2013, and throughout that period I have always had wireless connectivity issues, even after performing a factory reset. My wireless icon fluctuates between three states:
* Internet access
* Limited (in which case I cannot connect to the internet or any device on the network)
* Not connected - connections are available (and if I try to make it connect to the network, it will fail)
Sometimes my computer would instantly reach the "Internet access" state upon startup, and would remain in that state. Other times, it would be "Limited" for several minutes after starting up my computer before it finally connected, and even then the connection would drop out every now and then. At the worst, it would remain either "Limited" or "Not connected" indefinitely, no matter how many times I reset my wireless adapter or restarted my computer.
Until recently, I had always thought that these issues occurred randomly. However, I recently noticed that I always have a perfect connection whenever there are no other computers connected wirelessly to my home router, and I always experience issues of varying degrees when there is at least one other computer (or even a smartphone) connected wirelessly to the router. If there is another computer connected to the router via an Ethernet cable, this does not cause any problems; it is only wireless connections that interfere with my computer.
It is only this computer that has these problems; the other computers in my house never experience these issues, no matter how many computers are online. Also, my computer does not only experience these issues with my home router; it has the same issues on my university's wireless network.
My question is, how can I fix this? Is this a known bug, or is my wireless adapter defective? I know I can connect using an Ethernet cable where possible (I never have problems with Ethernet connections), but this is not always possible at university.

> {quote:title=TomDexter wrote:}{quote}
> Intel page provides the Wlan driver for this WLan card and its v16.7.0 for Win 8.1
I just checked the page you linked to, but it recommends that laptop users obtain their drivers from their OEM rather than from Intel.
I had already checked for driver updates through both Toshiba Service Station and Device Manager (and checked both again just now). Toshiba Service Station tells me that there are no updates available, and Device Manager tells me that "the driver software for your device is up to date".
Should I update to Intel's latest driver anyway? If so, should I also install the Windows 8.1 version of "Intel PROSet/Wireless Wifi Software"?
> {quote:title=TomDexter wrote:}{quote}
> I would recommend you to check the Wlan functionality and performance testing each Wlan standard 802.11 B / G and N and additionally check the different Wlan channels (1-11)
I have found the WLAN channel setting in Device Manager and I will test it when I get the chance. But how do I change the WLAN standard?
Message was edited by: Justinian

Wifi connection issue with mini Ipad

Hi,
Problem with the new mini ipad. wifi connection is fine but when accesssing online streaming TV sites, it is constantly disconnect itself and have to reconnect to the site before I coujld stream it again.
I have other devices connected to the same router fine without any issue.
Ipad works fine with the same site and connection
laptops work fine.
iphones work fine
only the mini ipad is not.
took to Genius bar, nothing much was done. Called support line, waited hrs for someone to tell me to make apt with Genius bar.
This has becoming very annoying and disappoiting with Apple products since Steve J is gone.
any help is greatly appreciate it.
Regards,

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

BT HH5 online connection issue (NAT)

Similar Messages

Maybe you are looking for