BTS 2013 - How to Enable BizTalk to Use the Supplied ISA11 Value on a File Instead of the Value Set in the Agreement ("^", "U")

I have a case where a trading partner sends two separate file types: a 999 acknowledgement (uses the carat separator) and a 277U (uses the "U"). The trading partner uses the same ISA6/ISA8 identifiers. The 999 acknowledgement
cannot be defined in the Transaction Set List so I need to support all transaction sets in the agreement. For the 277U, I can set the 277 in the set list, but then having multiple agreements with the same ISA6/ISA8 is not allowed. The type
of file we accept is directed to an orchestration via the receive port/receive folder (999 files go to one folder and 277U files go to another).
I would like to be able to accept the file and let BizTalk determine the repetition separator by reading it from the supplied ISA11 value rather than the set value in the agreement. Is this possible?

Here's the thing, all other HIPAA transactions define ISA11 as Repetition Separator so having an ISA11 value of 'U' on a 277U is an outlier. 
Let me alter my advice...the first thing you should do is check their Companion Guide for the 277U to see if they have specified the interpretation of ISA11.
But, looking at the 277CA Implementation Guide, ISA11 is defined as Repetition Separator.  I don't have have the official 277U IG but if you can get a copy, that will decide this definitively.
So, I would raise it as a bug on their side.
However, if they insist on remaining non-compliant, you then have to get them to document to you the exact meaning of ISA11 since they're causing some ambiguity.  If they are sending 'U' as Standards Identifier, they I would use a custom Pipeline Component
to change 'U' to '^' in EDI.

Similar Messages

  • How to enable frontend printing using Adobe Print Forms

    Otto Gold at the forum "SAP Interactive Forms by Adobe" gave me the tip that Sandra Rossi in this forum might help me out. Here is the link to my original thread How to enable frontend printing using Adobe Print Forms
    My question was:
    Hi Experts!
    Did anyone of you manage to enable frontend printing using Adobe Print Forms? In order to save administration effort we use frontend printing in our ERP system. We just changed some SMARTFORMS to the new Adobe Forms technology. Now we learned that direct frontend printing does not work with these forms.
    Any help will be very much appreciated.
    Kind Regards,
    Gerald

    I think you'll be disappointed by a rather negative answer but I'll try to explain everything I know (or think I know) the best I can
    The simplest solution is to do a preview, and print from Adobe Reader! (as I could see on one project, users have to display one more dialog than usually to print) It's the best workaround according to me.
    How Adobe form printing works:
    When you print an Adobe form from SAP, a printer language (PCL, PS, ZPL, PDF) is retrieved from TSP0B table according to the device type, ADS (Adobe Document Services, installed in the SAP java stack) is then contacted to generate the form: a file corresponding to the printer language is generated and sent back to SAP (there are also 2 other little files but it's of none interest here). SAP stores it as a file (named SPOOL...) in the global directory (DIR_GLOBAL when you use AL11 transaction).
    When you ask SAP to print it, it sends the file as is to the printer.
    Note: when you ask SAP to display the spool, SAP sends a request to ADS which will send back a PDF (binary stream which is not stored on disk, just displayed on frontend).
    How frontend printing works:
    If you want to print a normal spool via frontend, SAP doesn't know the language of the printer you will choose. SAP sends the spool in a format named SAPWIN to a frontend program named SAPLPD, it converts the SAPWIN format into GDI, a Windows format that is understood by all printer drivers, and it is sent to the printer driver (you have selected) which converts the GDI format into the printer language.
    Any workaround?
    First possibility would be that ADS converts the PDF into SAPWIN format (by creating an Adobe .XDC file at the ADS side). SAP says it's not possible in Note 685571 - Printing PDF-based forms. As I understand, SAPWIN is a very simple language compared to PCL for example, so it is very difficult to convert a PDF to SAPWIN without losing much information. There's a SAP note about the SAPWIN language if you want to check.
    Second possibility is to print directly the PDF through Adobe Reader: you get the PDF from ADS, download it to the frontend (easy), and execute directly Adobe Reader print function. Unfortunately, I don't know if it's possible. Moreover, we should enhance the standard SAP print dialog...
    Third possibility is the one I recommended at the beginning of this post

  • I set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same ID). how do i consolidate the two users on my new mac book?

    i set up my new computer using the apple ID i always use, and then later migrated all my files from my old mac book to the same new one, but under a different user (same apple ID). how do i consolidate the two users on my new mac book?

    Well if you use the Finder Go menu to Computer, a window opens up double click on your boot drive and then on Users folder, open the other user folder and open Public and drop your files into DropBox
    When you do this it will copy them and change the permissions and user assigned to it, so log into the other user and place them into your respective normal folders.
    Once you have all your files over and don't need the old user, use System Preferences > Accounts to delete it if you wish, however it's good two Admin accounts on the machine in case something bad happens in the other. Some people for security reasons on use a Standard account for most uses and a emergency Admin account.
    One can still do most Admin things in Standard user.

  • How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

    How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
    When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it.  I just need to move it out of the way to modify other portions of the document.
    thanks,
    C

    Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
    Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

  • How do I tell Adobe reader to open a file instead of being prompted to save the file?

    how do I tell Adobe reader to open a file instead of being prompted to save the file?

    Go to Tools - Options - Applications and enter "pdf" into the filter field. Select the action that you want to associate with PDF files.
    In your case select one of the "Use Adobe Acrobat" actions.

  • How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

    How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

    you need to "Get Info" on the file first. Select it, right click and select 'Get Info' in the menu.
    In the window that pops up, near the bottom, the "Open With" drop down menu needs changed. If the drop down menu does not present the one you want, select "Other" and find it.

  • How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?

    How can I attach a photo from iPhoto to mail as a file and not just put it on the email itself?

    Souvent eu ce problème,
    Je cree un dossier sur le bureau et glisse les photos à partir d'Iphoto dans ce dossier. Ce geste a pour effet de creer des copies dans le dossier.
    Il ne reste plus qu'à selectionner ces photos pour les envoyer en pièces jointes.

  • How to Enable Remote services using the GPO for the Client Machines

    How to enable remote Access services on Client machines using the Group Policy. After enable how to access with out switching the users  remote as administrator

    Hi,
    If you use windows server 2003, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
    Enable or disable Remote Desktop
    http://technet.microsoft.com/en-us/library/cc727977(v=WS.10).aspx
    If you use windows server 2008 and later version, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
    How to Enable or Disable Remote Desktop via Group Policy Windows 2008
    http://social.technet.microsoft.com/wiki/contents/articles/4980.how-to-enable-or-disable-remote-desktop-via-group-policy-windows-2008.aspx
    After you enable
    Allow users to connect remotely using Remote Desktop Services policy setting, users who are members of the Remote Desktop Users group on the target computer can connect remotely to the target computer by using Remote Desktop Services.
    So if you want users to access computer remotely, you need add users as members of the Remote Desktop Users group on the target computer.
    About how to add users to the Remote Desktop Users group, please refer to the following link:
    Configure the Remote Desktop Users Group
    http://technet.microsoft.com/en-us/library/cc743161.aspx
    Best Regards,
    Erin

  • FAQ: I found a bug. How do I write a useful bug report? Or send bug files to Adobe?

    If you think you've found a bug in Photoshop CS6, please post your findings here on the forums.
    Here is a list of the information we'll want for you to gather at a minimum:
    Clear and concise steps so that someone who isn't in front of your comptuer can reproduce the issue you are seeing
    Include information on the operating system/version you are running. (e.g. "Mac OS 10.7.3" or "Win XP Service Pack 3")
    Here are some more detailed instructions for writing a useful, complete bug report for us on the forums:
    Provide a descriptive title that includes your OS information:Example: "Photoshop crashes when I save a JPEG file using the File>Save For Web & Devices... command (Mac OS 10.7.3)"
    Provide concise, step-by-step details on how to reproduce the issue you are seeing.
    Example:
    Open an 8-bit, RGB image by selecting File>Open...
    Create a new layer by clicking the "Create New Layer" button on the bottom of the Layers panel
    Paint on the layer created in Step #2 using the default Brush tool
    Choose File>Save For Web & Devices...
    Make sure the optimized format is set to "JPEG" and set the Quality setting to "80"
    Click the Save button at the bottom of the Save For Web & Devices dialog, choose the desktop as the location for saving the file
    Provide a description of the "Result" you are observing:
    Example: "Result: Photoshop crashes"
    If there is an error dialog, please include the exact wording displayed in the dialog or provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
    If the error is a visual defect, either in the user interface or the image itself, provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
    Provide a description of the "Expected Result":
    Example: "Expected Result: Photoshop to save JPEG file to the desktop, no crash"
    In some cases this may be obvious (such as in the case of a crash) but in others, what you expect to happen may be different than what the application was designed to do. Please be as specific as possible.
    Provide the crash log by submitting all crash reports, including your email address, for every single crash your encounter:
    You may also include the contents of your crash log in your forum posts as well, but always submit them using the above instructions as well.
    Crash logs are located on Macintosh here: Users/<your user name>/Library/Logs/CrashReporter
    Provide your System Info from Photoshop: What's even more useful is if you can share your System Info from Photoshop as it contains all kinds of useful information (OS/version, graphics card, driver version, 3rd party plug-ins used, etc) that will help the team track down your issue.
    On occasion, the Photoshop engineers may request that you provide problematic files in order to reproduce and debug your issue.
    In these cases, please post the file somewhere using your own servers or one your favorite online document/distribution services and provide a URL/instructions to download the file:
    Dropbox
    Adobe SendNow
    YouSendIt
    If the file isn't something you can post publically, you can request that someone from the engineering team contact you to figure out a secure way to get the affected files.
    Thanks,
    The Photoshop Development Team

    First thing would be to realise the exact error. Second would be to check your logs to see what you have installed/upgraded which might be causing this error. Third, google your error and see if matches turn up. Fourth, search in Arch bugtracker to see if a match exist. Else file a report.

  • How can i change the method that get a Bitmap file and return 15 new Bitmaps so the new Bitmaps will be also PixelFormat Format8bppIndexed ?

    This is the method:
    public static Bitmap[] get_images_with_clouds(Bitmap radar_image)
    int e = 0;
    int f = 0;
    int image_clock_area_x = 0;
    int image_clock_area_y = 0;
    int image_clock_area_x1 = 140;
    int image_clock_area_y1 = 21;
    Bitmap[] localImages;
    localImages = new Bitmap[15];
    Bitmap image;
    image = new Bitmap(Properties.Resources.radar_without_clouds);
    BitmapData bmD = null;
    BitmapData bmD2 = null;
    try
    bmD = image.LockBits(new Rectangle(0, 0, image.Width, image.Height), ImageLockMode.ReadWrite, PixelFormat.Format32bppArgb);
    bmD2 = radar_image.LockBits(new Rectangle(0, 0, radar_image.Width, radar_image.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb);
    IntPtr sc0 = bmD.Scan0;
    unsafe
    int* p = (int*)sc0.ToPointer();
    int* p2 = (int*)bmD2.Scan0.ToPointer();
    for (e = image_clock_area_x; e < image_clock_area_x + image_clock_area_x1; e++)
    for (f = image_clock_area_y; f < image_clock_area_y + image_clock_area_y1; f++)
    Color clock_color = Color.FromArgb(p2[e + f * bmD2.Width]);
    p[e + f * bmD.Width] = clock_color.ToArgb();
    image.UnlockBits(bmD);
    radar_image.UnlockBits(bmD2);
    catch
    try
    image.UnlockBits(bmD);
    catch
    try
    radar_image.UnlockBits(bmD2);
    catch
    int c;
    for (c = 0; c < localImages.Length; c++)
    localImages[c] = new Bitmap(image);
    Bitmap new_image = new Bitmap(Properties.Resources.radar_without_clouds);
    Bitmap new_image1 = new Bitmap(Properties.Resources.radar_without_clouds);
    Bitmap localbmptest = black_and_white(new_image, radar_image);
    Image image1 = black_and_white(new_image, radar_image);
    image1.Save(@"c:\temp\testclouds666.jpg");
    Bitmap clouds = new Bitmap(image1);
    int x;
    int y;
    int a;
    int b;
    int d = 0;
    Bitmap redImage;
    redImage = new Bitmap(512, 512);
    using (Graphics g = Graphics.FromImage(redImage))
    g.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.NearestNeighbor;
    g.PixelOffsetMode = System.Drawing.Drawing2D.PixelOffsetMode.Half;
    g.Clear(Color.Red);
    BitmapData bmData = null;
    BitmapData bmData2 = null;
    BitmapData bmDataArray = null;
    try
    bmData = clouds.LockBits(new Rectangle(0, 0, clouds.Width, clouds.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb);
    bmData2 = radar_image.LockBits(new Rectangle(0, 0, radar_image.Width, radar_image.Height), ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb);
    IntPtr scan0 = bmData.Scan0;
    IntPtr scan02 = bmData2.Scan0;
    unsafe
    int* p = (int*)scan0.ToPointer();
    int* p2 = (int*)scan02.ToPointer();
    double h, mm;
    for (d = 0; d < localImages.Length; d++)
    bmDataArray = localImages[d].LockBits(new Rectangle(0, 0, localImages[d].Width, localImages[d].Height), ImageLockMode.ReadWrite, PixelFormat.Format32bppArgb);
    IntPtr scan0Array = bmDataArray.Scan0;
    int* pArray = (int*)scan0Array.ToPointer();
    for (a = 0; a < new_image.Width; a++)
    for (b = 0; b < new_image.Height; b++)
    Color color1 = Color.FromArgb(p[a + b * bmData.Width]);
    Color color2 = Color.FromArgb(p2[a + b * bmData2.Width]);
    if (color1.R != 0 || color1.G != 0 || color1.B != 0)
    h = color2.GetHue();
    mm = RadarAnalysis.Hue2MMPerHour(h);
    if (mm >= treshhold_array[14 - d])
    pArray[a + b * bmDataArray.Width] = color2.ToArgb();
    localImages[d].UnlockBits(bmDataArray);
    clouds.UnlockBits(bmData);
    radar_image.UnlockBits(bmData2);
    catch (Exception error)
    try
    clouds.UnlockBits(bmData);
    catch
    try
    radar_image.UnlockBits(bmData2);
    catch
    try
    localImages[d].UnlockBits(bmDataArray);
    catch
    Logger.Write("Error Exception ==> " + error);
    MessageBox.Show("Error Exception ==> " + error);
    return localImages;
    In the end i'm getting 15 Bitmaps in localImages.
    localImages is Bitmap[]
    The method get a Bitmap and the Bitmap pixel format is: Format8bppIndexed
    I want that in the end the 15 Bitmaps in localImages will be also pixel format of Format8bppIndexed.
    The problem is that if i change everywhere in the method from: PixelFormat.Format32bppArgb to PixelFormat.Format8bppIndexed
    I'm getting exception on the line:
    pArray[a + b * bmDataArray.Width] = color2.ToArgb();
    Attempted to read or write protected memory. This is often an indication that other memory is corrupt
    System.AccessViolationException was unhandled
      HResult=-2147467261
      Message=Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
      Source=My Weather Station
      StackTrace:
           at mws.ImagesComparison.get_images_with_clouds(Bitmap radar_image) in d:\C-Sharp\Download File\Downloading-File-Project-Version-012\Downloading File\ImagesComparison.cs:line 469
           at mws.ScanningClouds.backgroundWorker1_DoWork(Object sender, DoWorkEventArgs e) in d:\C-Sharp\Download File\Downloading-File-Project-Version-012\Downloading File\ScanningClouds.cs:line 695
           at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
           at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
           at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
           at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
           at System.Runtime.Remoting.Proxies.AgileAsyncWorkerItem.ThreadPoolCallBack(Object o)
           at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context(Object state)
           at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
           at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
           at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
           at System.Threading.ThreadPoolWorkQueue.Dispatch()
           at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()
      InnerException: 
    Line 469 is: pArray[a + b * bmDataArray.Width] = color2.ToArgb();

    Thorsten Hi,
    Too complicated for me i will try to look on it.
    Also if you will have time later maybe you could look at it too ? 
    For now what i tried was to get the returned 15 new Bitmaps to a local array:
    bitmaps = ImagesComparison.get_images_with_clouds(b1);
    for (int i = 0; i < bitmaps.Length; i++)
    ConvertTo1or8Bit.ColorToGrayscale(bitmaps[i]);
    break;
    Then make a convertion with a new class trying to convert the Bitmaps to 8 bit in the memory without saving them first to the hard disk. This is the new class:
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Drawing.Imaging;
    using System.Drawing;
    using System.IO;
    namespace mws
    class ConvertTo1or8Bit
    public ConvertTo1or8Bit()
    public static Bitmap ColorToGrayscale(Bitmap bmp)
    int w = bmp.Width,
    h = bmp.Height,
    r, ic, oc, bmpStride, outputStride, bytesPerPixel;
    PixelFormat pfIn = bmp.PixelFormat;
    ColorPalette palette;
    Bitmap output;
    BitmapData bmpData, outputData;
    //Create the new bitmap
    output = new Bitmap(w, h, PixelFormat.Format8bppIndexed);
    //Build a grayscale color Palette
    palette = output.Palette;
    for (int i = 0; i < 256; i++)
    Color tmp = Color.FromArgb(255, i, i, i);
    palette.Entries[i] = Color.FromArgb(255, i, i, i);
    output.Palette = palette;
    //No need to convert formats if already in 8 bit
    if (pfIn == PixelFormat.Format8bppIndexed)
    output = (Bitmap)bmp.Clone();
    //Make sure the palette is a grayscale palette and not some other
    //8-bit indexed palette
    output.Palette = palette;
    return output;
    //Get the number of bytes per pixel
    switch (pfIn)
    case PixelFormat.Format24bppRgb: bytesPerPixel = 3; break;
    case PixelFormat.Format32bppArgb: bytesPerPixel = 4; break;
    case PixelFormat.Format32bppRgb: bytesPerPixel = 4; break;
    default: throw new InvalidOperationException("Image format not supported");
    //Lock the images
    bmpData = bmp.LockBits(new Rectangle(0, 0, w, h), ImageLockMode.ReadOnly,
    pfIn);
    outputData = output.LockBits(new Rectangle(0, 0, w, h), ImageLockMode.WriteOnly,
    PixelFormat.Format8bppIndexed);
    bmpStride = bmpData.Stride;
    outputStride = outputData.Stride;
    //Traverse each pixel of the image
    unsafe
    byte* bmpPtr = (byte*)bmpData.Scan0.ToPointer(),
    outputPtr = (byte*)outputData.Scan0.ToPointer();
    if (bytesPerPixel == 3)
    //Convert the pixel to it's luminance using the formula:
    // L = .299*R + .587*G + .114*B
    //Note that ic is the input column and oc is the output column
    for (r = 0; r < h; r++)
    for (ic = oc = 0; oc < w; ic += 3, ++oc)
    outputPtr[r * outputStride + oc] = (byte)(int)
    (0.299f * bmpPtr[r * bmpStride + ic] +
    0.587f * bmpPtr[r * bmpStride + ic + 1] +
    0.114f * bmpPtr[r * bmpStride + ic + 2]);
    else //bytesPerPixel == 4
    //Convert the pixel to it's luminance using the formula:
    // L = alpha * (.299*R + .587*G + .114*B)
    //Note that ic is the input column and oc is the output column
    for (r = 0; r < h; r++)
    for (ic = oc = 0; oc < w; ic += 4, ++oc)
    outputPtr[r * outputStride + oc] = (byte)(int)
    ((bmpPtr[r * bmpStride + ic] / 255.0f) *
    (0.299f * bmpPtr[r * bmpStride + ic + 1] +
    0.587f * bmpPtr[r * bmpStride + ic + 2] +
    0.114f * bmpPtr[r * bmpStride + ic + 3]));
    //Unlock the images
    bmp.UnlockBits(bmpData);
    output.UnlockBits(outputData);
    return output;
    But they are still 32 bit. So i guess i didn't realy understand yet how to do it.

  • Using Acrobat X and creating a PDF File from EXCEL 2010, I notice that the Pagination restarts at 1 for each Worksheet included in the PDF.

    I use Acrobat X Standard and created a PDF file from two or more worksheets using EXCEL 2010.
    The resulting PDF file restarts the PAGE # (In header/footer settings of Excel) at 1 for each worksheet.
    However, a colleague of mine who has Acrobat X Pro version, using EXCEL 2010 and same exact file does the same task, he gets a file that starts at page 1 and second worksheet continues the page # from the last page of the First worksheet.
    We both are using the ACROBAT menu (not the print to Adobe printer) to create the file so that we can get Bookmarks included in the resulting file for each worksheet.
    We cannot figure out any option in Acrobat's preferences that controls the pagination on either of these versions of Acrobat.
    So is this just a feature that works one way in Standard version and another way in the Pro version, and the user has no control over it?

    This is so sad. I read your comments and I said, "Huh?" Haha!
    I tried the indexed color option and it did make the final file smaller. Around 600KB. But there's probably another way to make it even smaller like the gazillion-paged pdf file that I mentioned that was only about 300KB.
    And by saying a layout program, does that mean like Adobe InDesign? Does that mean that I should just make my graphics in Photoshop and then import using another program and finish the file there?
    What other layout programs can I use?
    Thank you so much!

  • For some reason today my Firefox stopped saving picture downloads as file names and identifies them all as URL. I don't know why it did this. It happened once before. How can I get it reset so I can save pictures as files instead of links?

    I rebooted twice and it continued to do this. Just before this happened, I had walked away from the computer for a couple of hours. When I came back, every time I tried to open Firefox it told me that it was already open but would not open. It opened after I rebooted but still would not save to folders as a file name, only as a URL link.

    Hey Gina,
    Change all your passwords, this will stop the remote access if there are any. Also check to make sure there are no third party apps managing your passwords. Also please contact the tech support for the phone for more technical help on that issue :-)
    I also understand that the customization is not staying. [[Customize Firefox controls, buttons and toolbars]]
    Did this happen when you synced last? Also are there more than one device with different Customized ui settings?
    Change the settings back from open "pages from last time" to the other homepage: [[How to set the home page]] or if this happened after you attached another device to the sync account, uncheck Preferences from the sync settings.

  • How do I stop the welcome loading when startring firefox 6. when it is not set in the general area of the options

    I have just updated to Firefox 6 and each time I open the browser the welcome page loads alongside my home page. Both Cooliris and Foxtabs 1.4 did the same, I have disabled those.
    It is not set as the home page next to or with my own desired opening site

    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Restore the default home page
    * https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
    Preferences are not saved - User.js file overriding preferences
    * https://support.mozilla.com/en-US/kb/Preferences%20are%20not%20saved#w_user-js-file-overriding-preferences
    * DELETE ALL LINES in '''''user.js''''' File
    Check and tell if its working.

  • HT1528 How to enable root user using terminal for mac lion 10.7.5 (step by step)

    I been trying to find the terminal version of creating a root user since I don't know my admin password and want to delete that user.

    You don't need to enable the root user. Just change the password for the account.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password,
         OS X- Changing or resetting an account password (Snow Leopard and earlier).
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself
        Reset OS X Password Without an OS X CD — Tech News and Analysis
        How To Create A New Administrator Account - Hack Mac

  • How to enable ftp backups using Retrospect over firewall

    Retrospect is currently only capable of active, NOT passive ftp, so when one enables the 10.4 firewall, it blocks Retrospect's ftp connections to my NAS. Opening tcp 20-21 doesn't seem to help.
    Has anyone succeeded in getting Retrospect 6 to work with the Tiger firewall in 10.4.3?

    Apologies, I've been away for a while. I personally do not use the OS X firewall (I use the Norton one), however if the normal GUI does not seem to give you the flexibility you require you can look at other tools that manipulate the ipfw rules - such as Brickhouse.
    Graham
    PBooks 1Ghz & 1.67Ghz, iMac 800Mhz, iBook 300Mhz, iPod mini & shuffle   Mac OS X (10.4.3)   Netgear ADSL WiFi, Airport Graphite, Squeezebox, SonyEricsson K750i, PalmIII

Maybe you are looking for