FAQ: I found a bug. How do I write a useful bug report? Or send bug files to Adobe?

If you think you've found a bug in Photoshop CS6, please post your findings here on the forums.
Here is a list of the information we'll want for you to gather at a minimum:
Clear and concise steps so that someone who isn't in front of your comptuer can reproduce the issue you are seeing
Include information on the operating system/version you are running. (e.g. "Mac OS 10.7.3" or "Win XP Service Pack 3")
Here are some more detailed instructions for writing a useful, complete bug report for us on the forums:
Provide a descriptive title that includes your OS information:Example: "Photoshop crashes when I save a JPEG file using the File>Save For Web & Devices... command (Mac OS 10.7.3)"
Provide concise, step-by-step details on how to reproduce the issue you are seeing.
Example:
Open an 8-bit, RGB image by selecting File>Open...
Create a new layer by clicking the "Create New Layer" button on the bottom of the Layers panel
Paint on the layer created in Step #2 using the default Brush tool
Choose File>Save For Web & Devices...
Make sure the optimized format is set to "JPEG" and set the Quality setting to "80"
Click the Save button at the bottom of the Save For Web & Devices dialog, choose the desktop as the location for saving the file
Provide a description of the "Result" you are observing:
Example: "Result: Photoshop crashes"
If there is an error dialog, please include the exact wording displayed in the dialog or provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
If the error is a visual defect, either in the user interface or the image itself, provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
Provide a description of the "Expected Result":
Example: "Expected Result: Photoshop to save JPEG file to the desktop, no crash"
In some cases this may be obvious (such as in the case of a crash) but in others, what you expect to happen may be different than what the application was designed to do. Please be as specific as possible.
Provide the crash log by submitting all crash reports, including your email address, for every single crash your encounter:
You may also include the contents of your crash log in your forum posts as well, but always submit them using the above instructions as well.
Crash logs are located on Macintosh here: Users/<your user name>/Library/Logs/CrashReporter
Provide your System Info from Photoshop: What's even more useful is if you can share your System Info from Photoshop as it contains all kinds of useful information (OS/version, graphics card, driver version, 3rd party plug-ins used, etc) that will help the team track down your issue.
On occasion, the Photoshop engineers may request that you provide problematic files in order to reproduce and debug your issue.
In these cases, please post the file somewhere using your own servers or one your favorite online document/distribution services and provide a URL/instructions to download the file:
Dropbox
Adobe SendNow
YouSendIt
If the file isn't something you can post publically, you can request that someone from the engineering team contact you to figure out a secure way to get the affected files.
Thanks,
The Photoshop Development Team

First thing would be to realise the exact error. Second would be to check your logs to see what you have installed/upgraded which might be causing this error. Third, google your error and see if matches turn up. Fourth, search in Arch bugtracker to see if a match exist. Else file a report.

Similar Messages

  • How to change outlook mail using Word to try and open PDF to Adobe Reader XI?

    how to change outlook mail using Word to try and open PDF to Adobe Reader XI?

    I've never found technology to make life easier. It mainly offers the promise (often unfulfilled) of making it cheaper or quicker. This didn't happen when the Girl Guides put a form in an envelope and posted it. But they probably laid off the person whose job that was with the promise of everything being easy on the internet.
    PDF has, curiously, become a victim of its own success. A few years ago, you could say to people "You need Adobe Reader" and it was the only serious game in town. So they got it and it works. Now everyone is making their own PDF reader for whatever reason, fewer and fewer people can be sure of having Reader. (PDF readers come at least with every Mac, every Windows 8 system, Chrome and FireFox, which covers a LOT of ground).
    This is coupled with a bizarre decision Adobe made a few years ago to have two kinds of form, one of which all the other software fails with (and, as I noted, even Adobe's own software on iPad and Android fails). This was a neat idea which was designed for big corporations. Then the really big mistake: giving everyone with Acrobat the tools to make these new kinds of form, and making it seem they were preferre or the only game in town. This is finished now (Acrobat 11 doesn't include this big boy's software) but the damage is done, oh how it is done.
    Even regular forms tend to only work properly in real Adobe Reader. The fact is, if you make or distribute PDF forms you need to tell people to use Adobe Reader, and to know exactly how to help them do that. If people can't do that or their users won't be motivated to bother, then PDF forms are no longer a suitable choice. Sad but true.

  • How to export book pdf using custom presets for all book files in indesign using javascript

    How to export book pdf using custom presets for all book files in indesign using javascript.

    Hi jackkistens,
    Try the below js code.
    Note: you can change your preset name in below (e.g, Your preset name).
    var myBook = app.activeBook;
    myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "Your preset name", myBook.bookContents, "Book_PDF", false);
    example:
    var myBook = app.activeBook;
    myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "[High Quality Print]", myBook.bookContents, "Book_PDF", false);
    thx,
    csm_phil

  • How to get last column used in report sorting?

    hi,
    how to get last column used in report sorting?
    simon

    How to identifiy which column was sorted having different reports on page?
    just use:
    'YOUR_STATIC_REGION_NAME' instead of p_static_id,
    :APP_ID for p_app_id,
    :APP_PAGE_ID for p_page_id
    :APP_USER_ID for p_app_user.
    and dont forget to grant SELECT on #OWNER# to APEX_030200.WWV_FLOW_PREFERENCES$
    good luck and thank you Juergen.Schuster
    Simon

  • How to schedule the background job if report have Presentation server files

    Hi All,
    I have searched the forums and found , the way for the scheduling the background job if report selection screen have the presentation server file input.
    1. Using the Open data set method.
    And my client is not OK with Open dataset way, it there any other way to do this, As we are using the EXCEL file.
    Thanks and Regards,
    Bharani

    Hi,
    As said above it is generally not possible. Since your client most obviously doesn't like graphical background I would recomend storing data as till now, but show it with your own report in more userfriendly way. For example:
    - as ALV Grid
    - in excel with use of OLE either as embedded in SAP or new window (check transaction OLE for example)
    - with use of webdynpro
    BR
    Marcin Cholewczuk

  • How do I write a cluster of an array to a file that can be looked at with other applications?

    I have a cluster of array that are different data types. How do I write this to a file, so that other applications can read it, i.e. notepad etc?

    Each elements of the array has a cluster of different data. It is unbundled and separated by a comma , then converted to a string. It is indexed out to a CSV array and then written to a spreadsheet file. The spreadsheet file reads it and outputs a CSV array. This is then going into for loop to reassemble the string output to its original clustered data representation. The iterations puts the clusters back into the array at the correct indexed position.hint: the for loop is the key to manipulating the array data...this VI is like an egg to a chicken and chicken to an egg, whatever came first?
    Attachments:
    disassemble_assemble ARRAY.vi ‏20 KB

  • How to download PF-STATUS of a Report to a Text File

    Hi Friends,
    Please guide me on this,
    I want to download PF-STATUS of a Report into a text file,
    Problem is how to get/capture the PF-STATUS.
    Regards,
    Sowjanya

    Hi,
    Please follow the following link
    Upload / download PF Status
    Regards,
    Shailaja

  • How to find problematic quries using AWR report

    Hi All,
    Somebody please help me how do I analyze the AWR report to find out problematic quires and the relevant recommendation for it.
    It would be highly appreciable
    Kind Regards
    Shankar

    if youre running AWR means you got enterprise edition with the diagnostic licence pack add on. Substantial investment even in a minimal cpu configuration.
    Reason Im asking is your question is opened ended. Sure you can look at the top consuming SQL statement, but that not might be what needs tuning so you want to waste your time trying to fix things that arent broken?
    Have you got a DBA on site?

  • How to stop computer from using microsoft outlook to send email link instead of thunderbird.

    Recently added microsoft security essentials as security when problem started.

    Try set [[Make Thunderbird the Default Mail Client|Thunderbird as default client email]].

  • How to convert the output of the report (program) to PDF file , Please HELP

    Good Morning, ALL
    I have done a small program in ABAP that lets the employee enters his information. Once the emplyee enters the information and executes the program, I want the result to be saved in a PDF file (in any kind of format). I did try to do this action BUT I couldn't. ( ABAP Beginner LOL ).
    This is the code ( The main thing ):
    SELECTION-SCREEN BEGIN OF BLOCK Yours WITH FRAME TITLE text-001.
    PARAMETERS: NAME(15) TYPE C OBLIGATORY lower case,
                CITY LIKE NAME OBLIGATORY ,
                DATE LIKE SY-DATUM DEFAULT SY-DATUM   MODIF ID ZZZ,
                ID# TYPE C LENGTH 9,
                PHONE TYPE C LENGTH 10.
    SKIP 4.
    SELECTION-SCREEN END OF BLOCK Yours.
    SELECTION-SCREEN BEGIN OF BLOCK More WITH FRAME TITLE text-002.
    PARAMETERS: MALE RADIOBUTTON GROUP G1 DEFAULT 'X',
                FEMALE RADIOBUTTON GROUP G1.
    SELECTION-SCREEN END OF BLOCK More.
    SELECTION-SCREEN BEGIN OF BLOCK Details WITH FRAME TITLE text-003.
    PARAMETERS: P_DATE TYPE DATUM,
                Locate TYPE C LENGTH 30.
    SELECTION-SCREEN END OF BLOCK Details.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'ZZZ'.
          SCREEN-INPUT = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    Any useful help will be appreciated, THANK YOU

    Hi
    Try the below code.
    REPORT ztest_notepad.
    "Variables
    DATA:
       l_lay         TYPE pri_params-paart,
       l_lines       TYPE pri_params-linct,
       l_cols        TYPE pri_params-linsz,
       l_val         TYPE c,
       l_no_of_bytes TYPE i,
       l_pdf_spoolid LIKE tsp01-rqident,
       l_jobname     LIKE tbtcjob-jobname,
       l_jobcount    LIKE tbtcjob-jobcount,
       spoolno       TYPE tsp01-rqident.
    *Types
    TYPES:
       t_pripar      TYPE pri_params,
       t_arcpar      TYPE arc_params.
    "Work areas
    DATA:
       lw_pripar     TYPE t_pripar,
       lw_arcpar     TYPE t_arcpar.
    DATA:
       it_t100       TYPE t100  OCCURS 0 WITH HEADER LINE,
       it_pdf        TYPE tline OCCURS 0 WITH HEADER LINE.
    "Start-of-selection.
    START-OF-SELECTION.
      l_lay   = 'X_65_132'.
      l_lines = 65.
      l_cols  = 132.
      "Read, determine, change spool print parameters and archive parameters
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          in_archive_parameters  = lw_arcpar
          in_parameters          = lw_pripar
          layout                 = l_lay
          line_count             = l_lines
          line_size              = l_cols
          no_dialog              = 'X'
        IMPORTING
          out_archive_parameters = lw_arcpar
          out_parameters         = lw_pripar
          valid                  = l_val
        EXCEPTIONS
          archive_info_not_found = 1
          invalid_print_params   = 2
          invalid_archive_params = 3
          OTHERS                 = 4.
      IF l_val  space AND sy-subrc = 0.
        lw_pripar-prrel = space.
        lw_pripar-primm = space.
        NEW-PAGE PRINT ON
          NEW-SECTION
          PARAMETERS lw_pripar
          ARCHIVE PARAMETERS lw_arcpar
          NO DIALOG.
      ENDIF.
      "Get data
      SELECT *
      FROM t100
      INTO TABLE it_t100
      UP TO 100 ROWS
      WHERE sprsl = sy-langu.
      " Writing to Spool
      LOOP AT it_t100.
        WRITE:/ it_t100.
      ENDLOOP.
      NEW-PAGE PRINT OFF.
      CALL FUNCTION 'ABAP4_COMMIT_WORK'.
      spoolno = sy-spono.
      "Convert spool to PDF
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
          src_spoolid   = spoolno
          no_dialog     = ' '
        IMPORTING
          pdf_bytecount = l_no_of_bytes
          pdf_spoolid   = l_pdf_spoolid
          btc_jobname   = l_jobname
          btc_jobcount  = l_jobcount
        TABLES
          pdf           = it_pdf.
      "Download PDF file C Drive
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename = 'C:\itab_to_pdf.pdf'
          filetype = 'BIN'
        TABLES
          data_tab = it_pdf
    Hope this helps you.

  • How to set Excel Options using  crystal reports 2008

    Hi,
    I am trying to figure out CR 8.5 (Crystal report control) Equivalents in Crystal reports 2008 using crystal report viewer in .Net but not able to find the exact replacments.
    Properties used in CR 8.5
    CRAXDRT.ExportOptions.ExcelUseWorksheetFunctions=True
    CRAXDRT.ExportOptions.ExcelUseTabularFormat =True
    CRAXDRT.ExportOptions.SetLogOnInfo(1,3,4,5)
    Please let me know the replacements for the above mentioned properties in .Net using crystal report viewer (CR 2008)
    Thanks in Advance
    Regards,
    Ramnath

    Hello,
    The code that has been provided is of Report Designer Component.
    RDC has been deprecated in Crystal Reports 2008.
    Use the 'ExcelFormatOptions' class. It provides many options regarding exporting in an excel format.
    ExcelFormatOptions myExportFormatOptions = new ExcelFormatOptions();
    Try exploring the Developer guide for Crystal Reports .NET SDK [here|http://www.sdn.sap.com/irj/boc/sdklibrary#section7]..

  • How to find Which package used in Reports

    Hi,
    Is there any option to view all the package which used in all the all eul reports. My problem is One report is refreshing tables using package/function/ procedure ...........i which report is doing that ..........I'm having more than 1500 discoverer report and opening all report one by by is not fessible as each having tabs as well.........

    Hi,
    You should start from the table that is being updated...
    find its referenced objects, you can use :
    select a.owner, name, decode(a.type,'PACKAGE BODY','PACKAGE',a.type),do.status
    from all_dependencies a,
    dba_objects do
    where do.object_name=a.referenced_name
    and do.owner=a.referenced_owner
    and do.object_type=a.referenced_type
    and referenced_name = 'xxxxxxxxx'; -<<<<----- put here your table name
    This will give you the list of objects referencing the table, try to find the package / procedure / function.
    then login to the administrator and try to locate the package in the list of function (you need to go to the register functions screen)
    Tamir

  • How do I write snap shot of my data to measurement file every 5 seconds

    Hi There
    I'm trying take a snapshot of my data stream once every 5 seconds and write it to a .LVM file. I'm having trouble with the "Write to Measurement File" VI. The rate at which it writes data to the file appears to be dictated by the "Samples to Read" parameter in the DAQ assistant. I've tried placing the "Write to Measurement File" VI inside a case structure and initiating the case structure with an "Elapsed Time" VI. This only results in a 5 second delay before the "Write to Measurement File" VI initiates. Once the "Write to Measurement File" VI is initiated it begins writing at 20 x per second. Is there a way to change this or dictate the rate at which the "Write to Measurement File" VI exicutes? 
    My reason for slowing down the write rate are, 1) Reduce disk space taken up by my data file. 2) Reduce CPU usage and hard disk access cycles.
    The reason I can't increase the "Samples to Read" value in the DAQ assitant (to match my data writing requirement) is that my VI will begin to miss events and triggers.
    I'm sure I can't be the only person who needs high frequency data acquisition and low frequency writing of the processed data to disk? I can't however see a straight forward way of achiving this.
    The hardware I am using is a NI USB 6008 DAQ, acquiring analogue voltage data at 100hz.   
    Thanks in advance for your help
    Cheers
    Kim
    Solved!
    Go to Solution.

    The case structure and the elapsed time function should work. Did you configure it to reset when the time target is reached? You should get a single true and then the output will be false until the time has elapsed again. The write to file would not be running 20 times a second. Post your code if you still have problems.

  • How do I write the contents of a string array to file?  Is there a package

    freely avaliable to do this? I am writing a console program that will save the selections made to file. I have convenience packages that came with my book, it allows int and double arrays to be written to file, but not string arrays. Any help would be greatly appreciated.
    Thanks,
    Joe Lavender

    One easy way to do this is to populate a Properties object with the index as the key and the element as the value.
    The properties has built in methods for writing it to file and reading it in.

  • How can I write a checkbox.label into a server text file?

    Hello, world...
    I have a problem...
    I need to write into a server text file the label of the selected checkbox..
    The client side script is:
    private function writeFile (e:MouseEvent):void
                 if (cb1.selected == true && writeBtn.label == "Conferma")
                     nc.call ("WriteNow",null,"La lettera iniziale è:"+cb1.label+"\n");
                     writeBtn.label = "Fatto";
                 else if (cb2.selected == true && writeBtn.label == "Conferma")
                      nc.call ("WriteNow",null,"La lettera iniziale è:"+cb2.label+"\n");
                     writeBtn.label = "Fatto";
                 else if (cb3.selected == true && writeBtn.label == "Conferma")
                       nc.call ("WriteNow",null,"La lettera iniziale è:"+cb3.label+"\n");
                      writeBtn.label = "Fatto";
    ...and the server side script is:
    var anVis = new File("Analisi_Visiva.txt");
    fileWriter.WriteNow = function(cliMsg)
            anVis.open("text", "append");
            if (anVis.isOpen)
                 anVis.write(cliMsg);    //line 17.
                 anVis.close( );
    I have this error in the Live Log of the FMS3 Administration Console:
    Sending error message: C:\Programmi\Adobe\Flash Media Server 3\applications\AnalisiVisiva\AnalisiVisiva.asc:line 17:File operation write failed.
    Why doesn't It work?
    Please, help me...
    Emiliano.

    Hello,
    In order to download your internal table just call the following fm:
      CALL FUNCTION 'TB_LIMIT_WS_DOWNLOAD'
       EXPORTING
      BIN_FILESIZE                  = ' '
         filename                      = dest
         filetype                      = 'ASC'
         mode                          = 'O'
       IMPORTING
         filelength                    = filesi "Bytes read
        TABLES
          data_tab                      = p_ti_temp "your IT
       EXCEPTIONS
         file_write_error              = 1
         invalid_filesize              = 2
         invalid_type                  = 3
         no_batch                      = 4
         unknown_error                 = 5
         gui_refuse_filetransfer       = 6
         no_authority                  = 7
         OTHERS                        = 8
    Hope this helps
    Gabriel

Maybe you are looking for