Bubbling exceptions up from sub packages
Hi. We run 2012 std. We r trying 2 get our heads around the options we would have customizing capture of exceptions that bubble up (if that is possible) to our master pkg from sub pkgs. This question is independent of ssis's sys logging.
My recollection is that ssis tells us a lot (maybe too much repetition) about exceptions. Our goal is to customize how we deal with exceptions at lower levels in the master pkg itself (perhaps in the .net service that calls the mstr if that can be
bubbled up) so that we aren't incorporating the same custom logging at every level of the ssis call "tree/structure".
We capture some exceptions already in vars by incorporating try catch blocks in our c# scripts. But haven't addressed yet how those might be bubbled up. It is hoped that whatever we do with these can mimic what we do with exceptions thrown by
other ssis components where there is no c# code to catch the exception.
Can the community get us started?
this is what I'm concluding from what I see and what the community has said thus far:
If our goal is a tool that can answer most inquiries about what our etl has done,
1) forget about dbo.sysssislogs . It doesn't record exceptions. Traceability may be present but at what cost? It is susceptible to different approaches used by different programmers working on different pkgs. Its
not a question of if but rather when it will be truncated and thus be out of sync with supporting custom log tables. It is probably going to behave differently from release to release of ssiis.
2) keep that flat file ssis log around. I'm not sure what its formal name is but we often append a datestamp to a file name we give it when running pkgs from the command line. As much of a challenge as it is to read that
file, it seems more informative and friendly to me than dbo.sysssislog. And kills two birds with one stone in the event that custom logging cant make a connection to the db where custom logging takes place.
3) get serious about ssis component naming conventions. How informative is "For Each Loop" when trying to make heads or tails of what a log is trying to tell you.
4) don't allow parallel processing (neither in cf not df) until ssis gets better at the whole var locking unlocking race condition thing. Handle locking yourself. Incorporate multiple pkgs if both parallel processing and
useful logging r important.
5) bake record counts, start times and end times into your logging solution. Reject counts as well if applicable.
6) use pre, post and error handlers to do the logging with a std toolbox item if possible thus leaving pkgs more readable. Record parent child component traceability info that is exposed in these handlers thru system vars. Supplement latter with exceptions
caught in c# scripts. Use views and indexes for the dashboards that will need to look at this stuff from different perspectives and permissions after the fact. Prepare for repetition where errors bubbled up thru parent ssis components.
7) get an answer on guids when ssis components r copied from place to place. If a new guid isn't created, find a way (I think there is a tool for this), to generate a new guid for the new component. I think a component guid column
would be germane to a custom logging tool. Similarly watch out for changing a component's guid once logging has begun.
Similar Messages
-
Can't create WS from PLSQL package (Jdeveloper 11g 4) (Exception occured)
Hello,
I'am using JDeveloper 11g preview 4.
On database i have a package with 2 procedures.
When I like to create a WS from database package I get the Exception:
java.lang.ClassCastException: oracle.jdeveloper.webservices.model.plsql.PLSQLPortType
at oracle.jdeveloper.webservices.model.generator.AddToDeploymentProfiles.getJarFiles(AddToDeploymentProfiles.java:592)
at oracle.jdeveloper.webservices.model.generator.AddToDeploymentProfiles.action(AddToDeploymentProfiles.java:292)
at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:147)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.Dialog$1.run(Dialog.java:525)
at java.awt.Dialog$2.run(Dialog.java:553)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:551)
at java.awt.Component.show(Component.java:1300)
at java.awt.Component.setVisible(Component.java:1253)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:361)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:222)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:194)
at oracle.jdeveloper.webservices.model.Model.saveEditSync(Model.java:242)
at oracle.jdevimpl.webservices.wizard.jaxrpc.PLSQLWizard.runWizard(PLSQLWizard.java:366)
at oracle.jdevimpl.webservices.wizard.jaxrpc.PLSQLWizard.runWizard(PLSQLWizard.java:137)
at oracle.jdevimpl.webservices.WebServicesAddin.fastCreatePlSqlService(WebServicesAddin.java:1503)
at oracle.jdevimpl.webservices.WebServicesAddin.handleEvent(WebServicesAddin.java:870)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:513)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:843)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:486)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.menuDragMouseReleased(BasicMenuItemUI.java:1104)
at javax.swing.JMenuItem.fireMenuDragMouseReleased(JMenuItem.java:578)
at javax.swing.JMenuItem.processMenuDragMouseEvent(JMenuItem.java:475)
at javax.swing.JMenuItem.processMouseEvent(JMenuItem.java:422)
at javax.swing.MenuSelectionManager.processMouseEvent(MenuSelectionManager.java:283)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1043)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Exception from Jdeveloper console
Validating XML...
Validating C:\Generali\WsGenerali\public_html\WEB-INF\web.xml
Validate XML: 0 errors, 0 warnings.
Aug 13, 2008 1:20:20 PM oracle.javatools.logging.LogUtils log
WARNING: Exception in task oracle.jdeveloper.webservices.model.generator.FixLocationAttribute$1@1fa522d on model oracle.jdevimpl.webservices.wsdl.WSDLXmlModel@129271e; txn name=null
java.lang.NullPointerException
at oracle.jdeveloper.webservices.model.generator.FixLocationAttribute$1.performTask(FixLocationAttribute.java:72)
at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:172)
at oracle.bali.xml.model.task.StandardTransactionTask.run(StandardTransactionTask.java:103)
at oracle.jdeveloper.webservices.model.generator.FixLocationAttribute.action(FixLocationAttribute.java:51)
at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:147)
at java.lang.Thread.run(Thread.java:595)
Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
WARNING: Exception Encountered
Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
WARNING: Exception Encountered
Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
my procedures are:
type r_sifrant is record
( id number,
nadrejeni_id number,
opis varchar2(100),
privzeto varchar2(1)
type r_cursor is ref cursor return r_sifrant;
function f_sel_sifrant(p_naziv in varchar2) return r_cursor;
procedure gen_polica(p_username in varchar2, p_polica_xml in clob, p_stevilka_police out number);
Here I have posted a video of generating ws from plsql package (screen capture):
http://shrani.si/f/x/P6/m5GSF8c/in2.avi
Thank you for any help
best regards
Peterv
Message was edited by:
user651799Hello,
I'am using JDeveloper 11g preview 4.
On database i have a package with 2 procedures.
When I like to create a WS from database package I get the Exception:
java.lang.ClassCastException: oracle.jdeveloper.webservices.model.plsql.PLSQLPortType
at oracle.jdeveloper.webservices.model.generator.AddToDeploymentProfiles.getJarFiles(AddToDeploymentProfiles.java:592)
at oracle.jdeveloper.webservices.model.generator.AddToDeploymentProfiles.action(AddToDeploymentProfiles.java:292)
at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:147)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
at java.awt.Dialog$1.run(Dialog.java:525)
at java.awt.Dialog$2.run(Dialog.java:553)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:551)
at java.awt.Component.show(Component.java:1300)
at java.awt.Component.setVisible(Component.java:1253)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:361)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:222)
at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:194)
at oracle.jdeveloper.webservices.model.Model.saveEditSync(Model.java:242)
at oracle.jdevimpl.webservices.wizard.jaxrpc.PLSQLWizard.runWizard(PLSQLWizard.java:366)
at oracle.jdevimpl.webservices.wizard.jaxrpc.PLSQLWizard.runWizard(PLSQLWizard.java:137)
at oracle.jdevimpl.webservices.WebServicesAddin.fastCreatePlSqlService(WebServicesAddin.java:1503)
at oracle.jdevimpl.webservices.WebServicesAddin.handleEvent(WebServicesAddin.java:870)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:513)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:843)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:486)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.menuDragMouseReleased(BasicMenuItemUI.java:1104)
at javax.swing.JMenuItem.fireMenuDragMouseReleased(JMenuItem.java:578)
at javax.swing.JMenuItem.processMenuDragMouseEvent(JMenuItem.java:475)
at javax.swing.JMenuItem.processMouseEvent(JMenuItem.java:422)
at javax.swing.MenuSelectionManager.processMouseEvent(MenuSelectionManager.java:283)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1043)
at java.awt.Component.processMouseEvent(Component.java:5501)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
at java.awt.Component.processEvent(Component.java:5266)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3968)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1778)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Exception from Jdeveloper console
Validating XML...
Validating C:\Generali\WsGenerali\public_html\WEB-INF\web.xml
Validate XML: 0 errors, 0 warnings.
Aug 13, 2008 1:20:20 PM oracle.javatools.logging.LogUtils log
WARNING: Exception in task oracle.jdeveloper.webservices.model.generator.FixLocationAttribute$1@1fa522d on model oracle.jdevimpl.webservices.wsdl.WSDLXmlModel@129271e; txn name=null
java.lang.NullPointerException
at oracle.jdeveloper.webservices.model.generator.FixLocationAttribute$1.performTask(FixLocationAttribute.java:72)
at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:172)
at oracle.bali.xml.model.task.StandardTransactionTask.run(StandardTransactionTask.java:103)
at oracle.jdeveloper.webservices.model.generator.FixLocationAttribute.action(FixLocationAttribute.java:51)
at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:147)
at java.lang.Thread.run(Thread.java:595)
Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
WARNING: Exception Encountered
Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
WARNING: Exception Encountered
Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
my procedures are:
type r_sifrant is record
( id number,
nadrejeni_id number,
opis varchar2(100),
privzeto varchar2(1)
type r_cursor is ref cursor return r_sifrant;
function f_sel_sifrant(p_naziv in varchar2) return r_cursor;
procedure gen_polica(p_username in varchar2, p_polica_xml in clob, p_stevilka_police out number);
Here I have posted a video of generating ws from plsql package (screen capture):
http://shrani.si/f/x/P6/m5GSF8c/in2.avi
Thank you for any help
best regards
Peterv
Message was edited by:
user651799 -
How to view list of all system exceptions from standard package?
Hello,
How to view list of all system exceptions from standard package?
Regards
KrishnaJust for fun:
SQL> conn sys/****** as sysdba
Verbonden.
SQL> select cast(trim(substr(text,instr(text,'(')+1,instr(text,',')-instr(text,'(')-1)) as varchar2(30)) exception_name
2 , to_number(replace(substr(text,instr(text,',')+1,instr(text,')')-instr(text,',')-1),'''')) error_number
3 from user_source
4 where text like '%pragma EXCEPTION_INIT%'
5 and type = 'PACKAGE'
6 and name = 'STANDARD'
7 order by exception_name
8 /
EXCEPTION_NAME ERROR_NUMBER
ACCESS_INTO_NULL -6530
CASE_NOT_FOUND -6592
COLLECTION_IS_NULL -6531
CURSOR_ALREADY_OPEN -6511
DUP_VAL_ON_INDEX -1
INVALID_CURSOR -1001
INVALID_NUMBER -1722
INVALID_OBJECT_NAME -44002
INVALID_QUALIFIED_SQL_NAME -44004
INVALID_SCHEMA_NAME -44001
INVALID_SQL_NAME -44003
LOGIN_DENIED -1017
NO_DATA_FOUND 100
NO_DATA_NEEDED -6548
NOT_LOGGED_ON -1012
PROGRAM_ERROR -6501
ROWTYPE_MISMATCH -6504
SELF_IS_NULL -30625
STORAGE_ERROR -6500
SUBSCRIPT_BEYOND_COUNT -6533
SUBSCRIPT_OUTSIDE_LIMIT -6532
TIMEOUT_ON_RESOURCE -51
TOO_MANY_ROWS -1422
USERENV_COMMITSCN_ERROR -1725
VALUE_ERROR -6502
ZERO_DIVIDE -1476
26 rijen zijn geselecteerd.Regards,
Rob. -
Compiling application (with several sub-packages) from another java app
Hi,
I'm writing my own build tool and need to be able to compile an external application (pulled from cvs, subversion, ...) from within this build tool.
Probably I need to use com.sun.tools.javac.Main.compile ?
But how do I pass classpath, output dir, etc to this class and how can I make it compile all files in all (sub)packages of the given folder ?
thanks for any help.Never mind my previous post, I found a solution to the "the input line is too long" problem:
Putting all the files in a temporary file and then providing that file as the source to compile, like this:
javac -g:none -cp <classpath> -d classes @sourcefiles.txtwhere sourcefiles.txt is the name of the temporary file that contains the names of the source files (note the "@"-prefix)
For some reason, this is not mentioned/documented in the java docs (at least not in my docs)
Ok, so everything is compiling now, but I have one problem remaining:
For each "module" that I compile (the application I use for my tests consists of several "modules", i.e. subpackages), I get an error stating that "The system cannot find the path specified"
This seems obvious, because it is trying to write a file <package-name>\classes\<package-name>\<classname>.class
But why is it trying to write that file ?
-> Is this a known bug or something ?
Let me explain a little more...
For each compilation I do using the com.sun.tools.javac.Main.compile() method, it is giving this error.
Everything is compiling correctly, but it seems it is trying to write an extra class file to a wrong path.
Until now, it was always the first file in the row that gave the problem.
Example:
** module 1:
sources/com/example/module1/class1.java
sources/com/example/module1/class2.java
sources/com/example/module1/class3.java
sources/com/example/module1/sub1/subclass1.java
sources/com/example/module1/sub1/subclass2.java
sources/com/example/module1/sub1/subclass3.java
** module 2:
sources/com/example/module2/class1.java
sources/com/example/module2/class2.java
sources/com/example/module2/class3.java
sources/com/example/module2/sub1/subclass1.java
sources/com/example/module2/sub1/subclass2.java
sources/com/example/module2/sub1/subclass3.java
=> My application will compile module 1, do some other things with it and the module 2 and again do some other things with it.
The result would be:
Application started.
Loading configuration: OK
Compiling sources for module module1: E:\temp\_User_\project\packaging\workingdir\source\com/example/module1\class1.java:12: error while writing com.example.module1.class1: com\example\module1\classes\com\example\module1\class1.class (The system cannot find the path specified)public class class1 extends Thread {
^
Note: Some input files use or override a deprecated API.
Note: Recompile with -deprecation for details.
1 error
OK
Note: Contents of my classes directory for module1:
classes/com/example/module1/class1.class
classes/com/example/module1/class2.class
classes/com/example/module1/class3.class
classes/com/example/module1/sub1/subclass1.class
classes/com/example/module1/sub1/subclass2.class
classes/com/example/module1/sub1/subclass3.class
=> all class files are correctly compiled
Compiling sources for module module2: E:\temp\_User_\project\packaging\workingdir\source\com/example/module2\class1.java:12: error while writing com.example.module2.class1: com\example\module2\classes\com\example\module2\class1.class (The system cannot find the path specified)public class class1 extends Thread {
^
Note: Some input files use or override a deprecated API.
Note: Recompile with -deprecation for details.
1 error
OK
Application finished without errors.
Note: Contents of my classes directory for module2:
classes/com/example/module2/class1.class
classes/com/example/module2/class2.class
classes/com/example/module2/class3.class
classes/com/example/module2/sub1/subclass1.class
classes/com/example/module2/sub1/subclass2.class
classes/com/example/module2/sub1/subclass3.class
So, as you can see everything compiles as expected, but an error message is displayed related to each first file that is compiled.
==> Is this a known issue ?
==> What can I do about it ?
Suggestions welcome -
SSIS Package runs from the Package executer and from BIDS but not from the sql agent schedular
Hi Experts,
I have 2 packages :
1. Main Package -For each loop package
2. Sub Package - As we need to collect the information from several other DB with same table structures .
The Main Package calls the Sub Package and loops through several linked server (9 of them ) .
From last 2 weeks the scheduler is running on time but no data is loaded into our destination DB .
Daily i need to manually run the package .
The SQL Agent task is scheduled using the service account from which the sql server was installed on the server so it has the full privledges.
If i run the Main package from the BIDS i see 2 messages related to the configuration of xml no error message and executes fine.
If i run the Package from the execute package utility it runs fine.
Now if the package is scheduled for a nightly load it executes fine successfully no error message also in the Job History
but when i check for the data loaded on that day no data loads up in the destination DB . Due to this behavior of the sql agent even if am on leave i have to login on to the server and exec manually so if at times i forget the exec we are in big trouble
Please experts help me in troubleshooting the issue.
Thanks
PriyaHi Visakh16 ,
We are using a service account to run the package .. Earlier in the BIDS i was getting the error crypotgenic
something password .. I googled out and changed the security : Protection Level : Dont save Sensitive
information . So that error now its not showing in the BIDS
And how is login mapping done for the linked servers? You've configured a mapped login for the service account also?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
FTP task runs fine from SSIS Package Store, always times out in scheduled job
SQL Server 2012
VS 2010 SQL Server data tools
FTP Connection Manager
- port 21, chunk size 1kb, passive mode=false, saved plain text pw
Downloads 1 csv file to local directory on SQL Server box
This always works when run from the package. And always gives a timeout error when scheduled.
Message
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Started: 11:04:59 AM
Error: 2014-03-27 11:05:31.12
Code: 0xC001602A
Source: xxx Connection manager "FTP Acme1"
Description: An error occurred in the requested FTP operation. Detailed error description: The operation timed out
End Error
Error: 2014-03-27 11:05:31.14
Code: 0xC002F304
Source: Acme FTP Task
Description: An error occurred with the following error message: "An error occurred in the requested FTP operation. Detailed error description: The operation timed out".
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 11:04:59 AM
Finished: 11:05:31 AM
Elapsed: 31.949 seconds
SQL Server Agent is set to Logon As my domain account, and in the package history it says "logged on as " my account.
Any suggestions? Thank youYou're right, Arthur. Earlier when I tried running the package with dtexecui it did popup a Win7 firewall warning. Agreed with prompt to allow "SQL Server 2008 Integration Services Package Execution Utility" and it added C:\program
files (x86)\microsoft sql server\110\tools\binn\managementstudio\dtexecui.exe, to allowed programs. No problem with dtexec after that.
Do you know of any other firewall exceptions that would be good to try? Thanks!
Yeah, this pop up resulted in the timeout because it was hidden but awaiting acknowledgement.
The other thing off the top of my head would be the FTP port 21 if TCP is used.
Arthur My Blog -
Changing classpath of all sub-packages when moving package
So I'm new to Flash Builder and trying to make a Starling project. I want the Starling package to reside inside of a package called "code" instead of just residing in the root of my project. I can move it to the code package via drag-and-drop, but the classpaths of all the packages inside starling still say "starling.xxx" - whereas I want them to now say "code.starling.xxx".
How do I 'mass update' the paths of all the packages?Adding a new sourcepath is just that... Starting in root package, paths are read from your new classpath.
So, you need to do a formal move to put starling files in the new sub package either before or after placing them in the new source directory.
G -
I am at a client site that want's to use sub packages for different
parts of their application. For instance search JSPs and ViewBeans
would be in a top.SearchPages package. Is this possible?
Thanks,
Jason Smith
jsmith@E...In my sleep I think I arrived where I wanted to go yesterday. Make a
servlet for each sub-application. Let's start with a request for the
main servlet with a page request.
The page requested must be in the same sub-application that the servlet
lives in so as to accomodate the "hard-coding" of the package, etc. You
will only change sub-applications in the click event of the button or
href so I think it is OK.
For example, if you desire to go to the pgSearch1 page of the search
sub-application when you click on a button on the pgMenu1 page of the
menues sub-application then it happens on the
application.menues.pgMenu1 in the click event. The forward looks like
this;
getParentViewBean().forward("/cedg/searches/pgSearch1.jsp", targetView,
getRequestContext());
That is what "switches" from one sub-application to another. I think
the code on the servlet;
protected void initializeRequestContext(RequestContext requestContext)
super.initializeRequestContext(requestContext);
// Set a view bean manager in the request context. This must be
// done at the module level because the view bean manager is
// module specifc.
// TODO: Is this a problem for ViewBeans that cross module boundaries?
viewBeanManager = new ViewBeanManager(requestContext, PACKAGE_NAME);
((RequestContextImpl) requestContext).setViewBeanManager
(viewBeanManager);
will work ok when you get the request back because you'll be pointing
at a new sub-application servlet.
Tell me where this falls apart. It should be OK because the FORM build
in the formTag code uses the bean that is instantiated in the
useBeanTag so the correct servlet should be pointed to.
----- Original Message -----
From: jsmith@E...
Date: Monday, February 5, 2001 9:35 pm
Subject: [iPlanet-JATO] Re: Sub Packages
--- In iPlanet-JATO@y..., "Todd Fast" <Todd.Fast@S...> wrote:
Hi Jason--
I am at a client site that want's to use sub packages for
different
parts of their application. For instance search JSPs and ViewBeans
would be in a top.SearchPages package. Is this possible?Each JATO application is subdivided into modules, which are each subpackages
of the "root" application package. In your example, "top" would be
the
application package, and "SearchPages" a module package. So, from
the JATO
perspective, this is perfectly feasible and I'll be happy to discuss it with
you if you have further questions.
But, I'm not sure if you're referring to a migrated project or a new
project. The migration process takes the original ND projects and
converts
them to JATO modules. Therefore, for a migrated project, unless the
original SearchPages was an ND project, you will not have a separate
SearchPages package without manually creating it and moving the desired
pages/ViewBeans there.
Please give me more information and I can elaborate further if necessary.
ToddThanks for the response. This is a single project that has
already
been migrated. The user had folders in NetDynamics that of course
are just symbolic, however they want to maintain this structure
for
development. So, we have moved all objects into the packages they
want. However, it appears that JATO expects all ViewBeans to be
in
the same package as the servlet. What it appears is that I need
to
store the full class name including package, in the page so that
when
the page is rendered the full package name is in the hidden field.
JATO does a few things that make this difficult. It automatically
places the package name of the servlet onto the ViewBean.
Therefore,
if I added the full package name in the page,
top.SearchPages.pgSearchForSomething, it would attempt to
instantiate
top.top.SearchPages.pgSearchForSomething.
I believe I can modify JATO to accomplish what they desire.
However,
I don't think this is wise. I am relatively new to JATO and if
this
is not clear please let me know and I'll try to expand. Any help
you
can offer is appreciated.
[email protected] -
How can i get all java class names from a package using reflection?
hi,
can i get all classes name from a package using reflection or any other way?
If possible plz give the code with example.You can't, because the package doesn't have to be on the local machine. It could be ANYWHERE.
For example, via a URLClassLoader (ie from the internet) I could load a class called:
com.paperstack.NobodyExpectsTheSpanishInquisitionI haven't written it yet. But I might tomorrow. How are you going to determine if that class is in the package?
This subject comes up a lot. If you want to do something a bit like what you're asking for (but not quite) there are plenty of threads on the subject. Use google and/or the forum search facility to find them.
But the answer to your question, as you asked it, is "you can't do that". -
I have to make lots of speech bubbles (150+) that all have texts inside them which differ in length. I want the speech bubbles to look the same in terms of style, but I need different sizes of course for each text. This means that the rectangular part of the speech bubble should adapt in length and width to the text inside it, while the "arrow" pointing towards where the bubble is coming from (e.g. the person who speaks) should stay the same on every bubble. So is there a way or a workaround to make such "adapting" speech bubbles?
I appreciate any kinds of help
Thanks in advance!Here's another way I found:
1. Draw a speech bubble. Mine is a rectangle with rounded corners and a triangular pointer added with Pathfinder > Add
2. Drag out a frame the same size as the speech bubble. Select the speech bubble and Copy; then select the empty frame and choose Edit > Paste Into...
3. Alt-Drag the frame with the pasted speech bubble to make a copy, then crop one copy to leave only the top of the bubble showing, and crop the other copy to leave only the bottom.
4. Drag out a text frame and insert a table consisting of 1 column, 3 rows. Set the text frame to Autosize > Height Only.
5. Set the stroke/fill of the top and bottom rows to none, and style the middle row to match the speech bubble, (in my case a white fill and 2pt stroke; left and right).
6. Anchor (paste) a copy of the speech bubble top in the top table row, and a copy of the speech bubble bottom in the bottom row.
Getting the 3 parts to match up with is where you just have to work on it until you get it right. Use the positioning tools in Anchored Object options and the column width setting in Cell options to line everything up.
Enter your text in the middle row. (Hey, look at that...a valid application of Comic Sans!) With the Cell Height set to an "At Least" setting, the cell will expand to fit whatever text you enter, pushing the the bottom row down, with the text frame auto-sizing to keep everything in play... -
Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft Dear all who can really help, Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time? Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only" I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts. I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS). And this is the only way to contact with them, because they could use Skype only in overseas. BUT I don't need new friend from other unknow Skype member. I keep blocked all unknow spammers in every day. However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly. I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever? I appreciate if you would improve the privacy protection. Thank you very very very much.
Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
thxs!
cheers
rOot -
How to import a class not in the package from a package
how to import a class not in the package from a package?
http://java.sun.com/docs/books/tutorial/java/interpack/usepkgs.html
-
Help on ORA-06550 & PLS-00363 Error while running a procedure from a packag
Greeting All,
I ran the following procedure from a package on a command line in sqlplus:
SQL> exec QUALITY_ASSURANCE.COPY_SW_RESOURCES(2009,2010,9508);Where '2009' is the old fiscal year, '2010' is the new fiscal year and '9508' is the error code passed from the calling program. But, I received the following error messages:
ERROR at line 1:
ORA-06550: line 1, column 53:
PLS-00363: expression '9508' cannot be used as an assignment target
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Any thoughts, suggestions and/or advice to resolve these errors.
Thanks in advance.Orchid wrote:
Justin,
Thanks for your response and information. Yes, Theoa was correct the 3rd parameter is an OUT variable, and it is a numeric field. The procedure was called by a form as follows:
QUALITY_ASSURANCE.COPY_SW_RESOURCES(:BLK_CONTROL.FROMFY,:BLK_CONTROL.TOFY,V_ERR);But the form does not work so I am trying to isolate the problem by running the procedure by itself in sqlplus to make sure there is no problem with the procedure.
Yesterday, I was able to run the procedure in Toad for Oracle to a successful completion by providing the 3 parameters: (2009, 2010, null). Just wonder why I cannot run the same procedure with the same parameters on a command line in sqlplus as follows:
exec QUALITY_ASSURANCE.COPY_SW_RESOURCES(2009,2010,null);So, if I understand your suggestion correctly, in order to run the procedure with the 3 parameter successfully in sqlplus,
I have to declare the 3rd parameter in PL/SQL. That is to create a PL/SQL file as suggested and run the file, correct? CORRECT! -
Error while packaging or copying from a package
Hi,
I am getting the below error while I try to package ( entire project or individual objects) as well as when I try to copy objects from a package file.
Client version: 9.0.3 (537)
15-Oct-2013 07:33:40
java.lang.NullPointerException
at com.datanomic.director.transfer.server.TempFileManager.delete(TempFileManager.java:58)
at com.datanomic.director.transfer.server.Transferer.export(Transferer.java:238)
at com.datanomic.director.transfer.server.Transferer.export(Transferer.java:130)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at com.datanomic.utils.transport.server.ServerTransport.invoke(ServerTransport.java:119)
at com.datanomic.utils.transport.server.ServerTransport.invoke(ServerTransport.java:59)
at com.datanomic.utils.transport.http.server.TransportServlet.doPost(TransportServlet.java:72)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.datanomic.userauth.server.http.AuthFilter.doFilter(AuthFilter.java:129)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
This started on Oct 1st 2013. It was working before without any issue. The problem is faced by all users including the admin user.
The log has following entries -
server side logs
INFO: 02-Oct-2013 12:05:00: [dn:director version 9.0.3(537)]
SEVERE: 02-Oct-2013 12:04:59: Can't create cache file!
javax.imageio.IIOException: Can't create cache file!
at javax.imageio.ImageIO.createImageInputStream(ImageIO.java:361)
at javax.imageio.ImageIO.read(ImageIO.java:1351)
at com.datanomic.director.missionlieutenant.triggers.AbstractMissionTrigger.getTriggerNames(AbstractMissionTrigger.java:108)
at com.datanomic.director.triggers.manager.Trigger.getMatchingNames(Trigger.java:197)
at com.datanomic.director.triggers.manager.TriggerManager.getLocalizedTriggerNames(TriggerManager.java:397)
at sun.reflect.GeneratedMethodAccessor271.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at com.datanomic.utils.transport.server.ServerTransport.invoke(ServerTransport.java:119)
at com.datanomic.utils.transport.server.ServerTransport.invoke(ServerTransport.java:59)
at com.datanomic.utils.transport.http.server.TransportServlet.doPost(TransportServlet.java:72)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.datanomic.userauth.server.http.AuthFilter.doFilter(AuthFilter.java:129)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
Caused by: java.nio.file.FileSystemException: /tmp/imageio8224618281568165079.tmp: Read-only file system
at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
SEVERE: 02-Oct-2013 12:05:00: Can't create cache file!
javax.imageio.IIOException: Can't create cache file!
at javax.imageio.ImageIO.createImageInputStream(ImageIO.java:361)
SEVERE: 02-Oct-2013 12:05:00: Can't create cache file!
javax.imageio.IIOException: Can't create cache file!
at javax.imageio.ImageIO.createImageInputStream(ImageIO.java:361)
at javax.imageio.ImageIO.read(ImageIO.java:1351)
at com.datanomic.director.missionlieutenant.triggers.AbstractMissionTrigger.getTriggerNames(AbstractMissionTrigger.java:108)
at com.datanomic.director.triggers.manager.Trigger.getMatchingNames(Trigger.java:197)
at com.datanomic.director.triggers.manager.TriggerManager.getLocalizedTriggerNames(TriggerManager.java:397)
at sun.reflect.GeneratedMethodAccessor271.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
Caused by: java.nio.file.FileSystemException: /tmp/imageio2555104156799296129.tmp: Read-only file system
We use weblogic as user tstedq2 in Linux.
> -bash-4.1$ cd /tmp/
-bash-4.1$ ls -lrt
total 1276
drwxr-x--x 3 tstedq2 oinstall 4096 Aug 16 16:29 wlstTemptstedq2
-rw-r----- 1 tstedq2 oinstall 1298202 Sep 13 13:10 dndirector8572326682424543213.tmp
drwxr-x--x 2 tstedq2 oinstall 4096 Sep 16 05:59 hsperfdata_tstedq2
> -bash-4.1$ env
HOSTNAME=tstedq01
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
QTDIR=/usr/lib64/qt-3.3
QTINC=/usr/lib64/qt-3.3/include
USER=tstedq2
LS_COLORS=rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=01;05;37;41:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lz=01;31:*.xz=01;31:*.bz2=01;31:*.tbz=01;31:*.tbz2=01;31:*.bz=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=01;36:*.au=01;36:*.flac=01;36:*.mid=01;36:*.midi=01;36:*.mka=01;36:*.mp3=01;36:*.mpc=01;36:*.ogg=01;36:*.ra=01;36:*.wav=01;36:*.axa=01;36:*.oga=01;36:*.spx=01;36:*.xspf=01;36:
MAIL=/var/spool/mail/tstedq2
PATH=/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin
PWD=/tmp
LANG=en_US.UTF-8
HISTCONTROL=ignoredups
SHLVL=1
HOME=/home/tstedq2
LOGNAME=tstedq2
QTLIB=/usr/lib64/qt-3.3/lib
CVS_RSH=ssh
LESSOPEN=|/usr/bin/lesspipe.sh %s
G_BROKEN_FILENAMES=1
OLDPWD=/home/tstedq2
_=/bin/env
/tmp permissions are as below
> -bash-4.1$ ls -ltr
drwxrwxrwt. 6 root root 4096 Sep 17 03:15 tmp
I am saving the package to my local machine for which I've read and write. I am able to save packages from other EDQ applications to the same place.
This is an UAT environment and I need to package my SIT code and copy it to this.
Please let me know what is going wrong here.
Thanks and Regards,
RaviIt looks like a file permission problem on the server - specifically, looks like the app server user does not have permission to write to the temp directory /tmp and so cannot write the temporary data needed to package up the configuration.
-
"An error occurred while extracting files from the package "BaseSystem.pkg".
Hello!
I have a
MacBookPro5,5
Prozessortyp:Intel Core 2 Duo
Prozessorgeschwindigkeit:2.26 GHz
Anzahl der Prozessoren:1
Gesamtzahl der Kerne:2
L2-Cache:3 MB
Speicher:2 GB
Busgeschwindigkeit:1.07 GHz
Boot-ROM-Version:MBP55.00AC.B03
SMC-Version (System):1.47f2
Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
Problem:
I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation: 139 MB wired, 259 MB trapped, 397 MB active, 7 MB inactive, 1246 MB free, 1650 MB usable, 2048 MB totalIt sounds to me like your Internal Hard Drive is failing.
I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.
Maybe you are looking for
-
JTabbedPane with one close button for all tabs
Hello, there have several solutions been posted for JTabbedPane subclasses that provide tabs with icons working as close buttons on each tab. I think this is not user friendly because the user can hit the close button accidentally when selecting a ta
-
please!, Help please! My dad updated his phone but it is now recognized as my phone and he is getting my text messages and me him, also when ever I delete a contact of my phone it's deleted of his vise versa! Please help I need to fix this ASAP!
-
UnitOfWork / Update / EXCEPTION [TOPLINK-6004]
Hello! I have an ItemObject which contains ItemLines (ValueHolder, Master-Detail). I can update the (standard)Item-Objekt attributes, but how can i set the Itemlines-Object? Should i register the Itemlines-ValueHolder in the UnitOfWork? If this is a
-
I bought the QT Pro key back when I was using windows now I'm using a MacBook and can't get it to work. Does anyone know if Apple will change the key so that it will work and if so how does one go about it? Regards, Penfield
-
German language patch fot 11.5.10.2 EBS
Hi All, Can you please let me know the German language patch for 11.5.10.2 EBS version. Thanks, Venkat.