Changing classpath of all sub-packages when moving package

So I'm new to Flash Builder and trying to make a Starling project. I want the Starling package to reside inside of a package called "code" instead of just residing in the root of my project. I can move it to the code package via drag-and-drop, but the classpaths of all the packages inside starling still say "starling.xxx" - whereas I want them to now say "code.starling.xxx".
How do I 'mass update' the paths of all the packages?

Adding a new sourcepath is just that... Starting in root package, paths are read from your new classpath.
So, you need to do a formal move to put starling files in the new sub package either before or after placing them in the new source directory.
G

Similar Messages

Please specify how do we can activate a web scope feature over all sub webs when a solution package is activated.???

please specify how do we can activate a web scope feature over all sub webs when a solution package is activated.
when a solution package is deactivated the web scope features over all sub website gone deactivated and does not re-activated when solution package is activated.
we have couples of sub webs to activate web features manually that should be activated when a solution package is activated.
all sub webs are created by custom web templates onet.xml.

Hi,
I can think of three different solution (all custom solution)
Use Powershell Cmdlet to activate feature to all sub sites
Upgrade your solution to Site Collection scope, However all subsites under the root will have access to the features, which you may want to restrict based on your requirement
create a site scoped solution feature to activate the web scoped features, this will give you more control and easier management of all your features
here are some links -
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/10a95745-67c5-4a32-a783-b9ae8977f7e0/deploying-a-solution-with-a-feature-to-be-activated-on-a-number-of-subsites?forum=sharepointdevelopmentprevious
http://sharepointgroup.wordpress.com/2012/05/04/activating-and-deactivating-features-with-powershell/
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Sql server Configuration option when moving packages from dev env to production env

hi folks:
Our SSIS engine is SQL2008R2 and I am in charge of ssis package development and deployment from dev env to production env.
This is what I've done using configurations to move packages from dev to production.
1. on my local machine, I've created a database called SSIS_Config and a table that stores all
configration settings
CREATE TABLE [dbo].[SSIS Configurations]
ConfigurationFilter NVARCHAR(255) NOT NULL,
ConfiguredValue NVARCHAR(255) NULL,
PackagePath NVARCHAR(255) NOT NULL,
ConfiguredValueType NVARCHAR(20) NOT NULL
2. on dev ssis server, there is the same table [dbo].[SSIS Configurations] on SSIS_Config db which stores all configurations
Once package has been deployed to dev env and run with success, I'll move it from dev to prod
3. On Prod ssis server, there is the same table [dbo].[SSIS Configurations] on SSIS_COnfig db which stores all configurations
once ssis pkg has been deployed using deployment manifest, it runs without errors as all production db connection
will be updated manually in the table [dbo].[SSIS Configurations]
Our production env is unique as it's completely locked down and the only way to connect is through remote in session.
At this moment, I am maintaining three [dbo].[SSIS Configurations] tables : on my local machine, on SSIS dev server and on SSIS prod server.
This works fine so far as I am the sole developer... Soon, we will have more developers joined to develop ssis package .
I am wondering if there is anyway to cut the table maintained on my local machine and only use ones on dev server and prod server ?
I've tried using the table on dev server to disperse connectionstrings, it works file on dev env. However, when I deployed to product server,
since there is no sql connection between dev and prod, the configuration information can not be retrieved and theirfore package is failed.
Any ideas on how to move packages from local to dev to prod env.?
Thanks
Hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

Thanks Nearby BI guy. Am I correct that in your SSIS packages, there is only one connection manager which gets ConnectionStr populated from package configurations which is .xmlconfig
file and you then use expressions to populate connectionStrs of other connection managers through the ssisconfiguration tables?
Also for the one on Production environment, the contents of .xmlconfig has to be manually
changed in order to match the one on production env.
Is that correct?
I am thinking about using environment variables to point to the Config Database on each
local/dev/prod environment, but some environments may have strict policy on the usage of environment variables.
thanks
Hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

[N8] Lost all album covers when moving music colle...

Hi,
I recently bought an N8 with unlimited Ovi Music downloads and soon proceeded to download virtually the entire catalog avaliable. Ok, maybe not all, but I went crazy on discographies and stuff and soon my phone's mass memory was getting crowded by the songs. I have about 10Gb of music right now so I decided to buy a 32Gb MicroSD and make it the official storage for music. So I connected the N8 to the PC via USB, fired up Windows Explorer and moved everything inside the "Music" directory in mass storage (E to a Music directory I created in the SD (F. Moving the files took quite the while, but when it was over, I was terrified to realize all the album covers were gone and nowhere to be found. I even tried to move it back to mass storage but the artwork is still missing.
I really don't know what to do. Is there a hidden directory somewhere where artwork for albums downloaded via Ovi Store is kept? I sincerely hope so because I'm definitely not looking forward to resyncing 10Gb of music from PC to Phone, especially because some albums were downloaded directly from the phone so I'd probably have to get them again on the PC
I tried searching for an answer for this problem but the results are flooded by people trying to add album arts to mp3 files imported from iTunes or whatnot, which is not my case. Every album in my collection was either downloaded from Ovi Store (already associated with artwork) or ripped and associated to a cover image in Ovi Player itself, so the files are not even mp3, they're wma
Has anyone faced this problem? Is there a non-excruciatingly-boring way to work around it?
Thanks,
Rafael

I had the same problem. I posted my resolution here:
http://discussions.apple.com/message.jspa?messageID=3120440#3120440

Help please, spacific file update only changed files when moved

I record live bands and file size can be very large when i make changes to files i want to save time and resources by only updating what has changed without replacing the whole file. when moving files from desktop to external drive.
say i have a file named "jam" that i add files to on my external drive then i copy it to my internal drive, do some edditing and add some files. when i move it back to external drive i want to update the "jam" file add the new files and changed files without having to keep track of the changed files and not transfer the files that havent changed. can anyone help?

Only files and folders below directory "/emmc" will show up in windows explorer.
You will also not be able to edit (add/delete) files to the /system/media/audio/notifications folder (or just about any folder above /emmc) . This is because you do not have administrator access (for lack of a better term) to the phone.
So, if it's that important to you, you'll have to find a way to tell the phone you're an administrator
Windows Explorer correctly identifies these as two separate drives. There is, after all, a built in drive as well as the swappable SDcard.
Sorry I can't be of more help.

Hi i have moved from uk to india, i have changed my country in itunes store, when i am entering my payment details its not accepting it. more worse is all my applications which i have downloaded in uk are not working now. please suggest me a solution

hi i have moved from uk to india, i have changed my country in itunes store, when i am entering my payment details its not accepting. more worse is all my applications which i have downloaded in uk are not working now. please suggest me a solution

papillondefer wrote:
I want to be able to keep app's, music, movies and my Cloud/Match exactly the same. How do I do this?
Because of different local copyright laws and licensing you cannot keep everything exactly the same except for iCloud, which is not affected. You will have to create a new Apple ID for use on the UK iTunes Store with a form of payment drawn on a local bank and an address in the UK. As long as you have downloaded all your purchases and the computer is still authorized to play all protected video content that won't change, however Apps may give you trouble when updating because once associated with an Apple ID you can only switch between stores every 90 days.
As for iTunes Match you must contact Australian iTunes Store support to cancel the subscription and you will have to resubscribe on the UK store.

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.

have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely

Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>

E-mail changes to unreadable text when moved to another mailbox folder

Hi,
when moving a correct received e-mail to another mailbox folder, the mail and the attachment will change to unreadable text and it looks like the column below.
On my iPad and iPhone the mail and the attachment is shown correct. If I forward it to my own account again, the mail is also correct shown an my imac27, as long as it resides in the in-box.
On the other hand, there are lots of mails+attachments with "normal" behavier when moved.
Any idea about that?
mackliko
------=_NextPart_000_0001_01CCF256.3C7DD310
Content-Type: multipart/alternative;
          boundary="----=_NextPart_001_0002_01CCF256.3C7DD310"
------=_NextPart_001_0002_01CCF256.3C7DD310
Content-Type: text/plain;
          charset="us-ascii"
Content-Transfer-Encoding: 7bit
------=_NextPart_001_0002_01CCF256.3C7DD310
Content-Type: text/html;
          charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40">
<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<meta name=3DGenerator content=3D"Microsoft Word 12 (filtered medium)">
<style>

</style>

</head>
<body lang=3DDE-AT link=3Dblue vlink=3Dpurple>
<div class="3DSection1">
<p class="3DMsoNormal">Mfg<o:p></o:p></p>
<p class="3DMsoNormal">Martin lanzinger<o:p></o:p></p>
<p class="3DMsoNormal"><o:p> </o:p></p>
</div>
</body>
</html>
------=_NextPart_001_0002_01CCF256.3C7DD310--
------=_NextPart_000_0001_01CCF256.3C7DD310
Content-Type: application/pdf;
          name="Test.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
          filename="Test.pdf"

Please run /cleanviews switch to check the result.
(Type "Outlook.exe /cleanviews in Windows search bar and press ENTER.)
Please also create a new Outlook profile to check if the issue still persists. Thanks.
Tony Chen
TechNet Community Support

Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

What happens when you play music? Do the hardware volume controls work when using the Music app?

Can we change log_buffer parameter online e.g. when all users are working..

Hi,
Can we change log_buffer parameter online e.g. when all users are working.. ???
What is relation between redo buffer in sga and log_buffer parameter ?
SQL> show sga
Total System Global Area 3758096384 bytes
Fixed Size 1983152 bytes
Variable Size 553655632 bytes
Database Buffers 3187671040 bytes
Redo Buffers 14786560 bytes
SQL>
SQL> show parameter log_buffer
NAME TYPE VALUE
log_buffer integer 14338048
SQL>
SQL>
If the log_buffer parameter is 14 MB then why redo buffer is no as same size e.g.
14 MB
SSM

I am hoping your Oracle Consultant know what he's talking about.
According to Oracle Performance Guide,
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14211/memory.htm#sthref654
"On most systems, sizing the log buffer larger than 1M does not provide any performance benefit. Increasing the log buffer size does not have any negative implications on performance or recoverability. It merely uses extra memory.
The best method to determine if bigger redo buffer is needed is
SELECT NAME, VALUE
FROM V$SYSSTAT
WHERE NAME = 'redo buffer allocation retries';
The value of redo buffer allocation retries should be near zero over an interval. If this value increments consistently, then processes have had to wait for space in the redo log buffer. The wait can be caused by the log buffer being too small or by checkpointing. Increase the size of the redo log buffer, if necessary, by changing the value of the initialization parameter LOG_BUFFER. The value of this parameter is expressed in bytes. Alternatively, improve the checkpointing or archiving process.
Other than that, hight log file sync event indicate you need faster disk for your redo logfiles. However, please also post your commits per second and redo per second from your AWR report.
100M redo logs might be small for your environment.

When moving to Aperture 3, why upgrade the imaging system all at once?

I have been reading about the library migration issues when upgrading to Aperture 3 and my question is this: what is the advantage, if any, of attempting to migrate all the images instead of just upgrading the database and tackling the images as needed? For example, with a 60 gig library of previously edited images, why would I bother migrating all the images when I could simply do that one image at a time, as needed, to take advantage of the new editing tools? Wouldn't this approach make the upgrade process infinitely smoother and faster?
Apple says much the same thing is their support article here: http://support.apple.com/kb/HT3945
So, for those of you forcing the images update process along with the database upgrade, my question is why take the risk? Yes I know it is supposed to work, and it probably does for most people, but why bother taking that risk for images you have already edited when you can easily do it an image at a time? Am I missing something?

IDImager allows for Keywords to be written in hierarchical format. This means each individual keyword includes the parent keywords like this: "Others|Import|2009|2009-02-22". The only debate in my mind is about what will be more time consuming, writing and debugging a script to have exiftool extract the keywords and apply them hierarchical, or doing this task manually.
From playing with the Aperture trial I deducted that making changes to keywords in the keyword HUD applies these changes to all images. Changing the "fred" keyword to "Freddy" will update all images that have the original "fred" keyword applied.
We'll see. I am certainly not new to programming but have not used AppleScript before. Am still searching for a comprehensive guide and scripting examples that would help in pulling this off. But as I get closer to having the pre-processing outside of Aperture done for all of my images and very little accomplished in terms of the script I am leaning towards manually fixing my keywords.
Adi

Upgrading certain AUR packages when specific official packages change

I'm having some trouble with updating. As many Archers, I use some packages from AUR. In my case, I'm using bauerbill specifically to update packages from AUR just like I would with pacman. Quite convenient (thx, xyne!)
But I have some packages that need to be rebuild from AUR when certain official packages are updated, e.g. compiling thinkhdaps against the new kernel version, or updating Lightning and Enigmail from AUR when I update my Thunderbird. However, so far I have not yet found a way to do this: calling specific commands when certain packages are changed.
Is there any way to do this in pacman or one of the other arch package managers? Or do you have a clue about how to write a script that could do this? Any help would be greatly appreciated.
Last edited by Natanji (2010-07-22 06:49:54)

dmz wrote:You could watch (with inotify) the pacman log for specific applications and events. Turn this into a daemon, and execute relevant commands when application X is updated.
But I think that seems to be a problem as you wouldn't know which applications to keep watching since some might need to be re-built, and others might not.
I guess watching every package installed outside of pacman (pacman -Qm) would be the only way to see which AUR package needs to be re-built. Depending on how many packages you have installed from AUR or external sources, this could be very fast to extremely slow.

Should the admin/user folder and all of its sub folders be moved to the hdd or just parts of it? (eg. picture, movies, documents) What is the best way to go about doing this. Also should a 2t hdd be partitioned.

iMac with 256ssd and 2t hdd. Should the admin/user folder and all of its sub folders be moved to the hdd or just parts of it? (eg. picture, movies, documents) What is the best way to go about doing this. Also should a 2t hdd be partitioned.

Yes, you can move your user directories to the HD and keep your OSX and Applications on the SSD drive.
Whether you partition your HD or not depends on how much data you have and how you propose to use your HD.
Are you planning to use your iMac as a Time Machine backup volume? If so, partition it off.
Do you have huge data files, eg video, music, photos?
How much of your 2tb drive will be "free" once it is loaded with all your data?
A little more information is required before the optimal configuration can be recommended for your use.

Nested Skip Logic: How do I create a form where when a top-level option has changed, that its related sub-fields will retract (disappear)?

How do I create a form where when a top-level option has changed, that its related sub-fields will retract (disappear)?
(This question was asked also in 2012 and 2013, but no answer has been provided.)
THANKS
Deborah

Hi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though.

Changing classpath of all sub-packages when moving package

Similar Messages

Maybe you are looking for