Bug and toolbar

Hello,
1. Is there a bug? When you use "Einzelne Seite, fortlaufend" in "Bearbeiten" / "Voreinstellungen..." and start the Adobe Reader X the page is not "Einzelne Seite, fortlaufend". It does not work.
2. How can I use my prefered toolbar in the IE browser?
My prefered toolbar in the Adobe Reader 10:
The toolbar used in the browser:
Is it possible to use the prefered toolbar in the browser too?
Thanks for your help!
Best regards,
Frank

Hi,
1. when you use the following settings:
you will have this result (when you start Adobe Reader):
Full page.
2. when you use the following settings:
you will have this result (when you start Adobe Reader):
It is only the half page, not the full page and not the beginning of the next page.
3. when you use the following settings:
you will have this result (when you start Adobe Reader):
Full pages.
4. when you use the following settings:
you will have this result (when you start Adobe Reader):
Full pages and the beginning of the next pages.
Should there not be this result when you start Adobe Reader, when you use the settings from 2.?
Full page and the beginning of the next page?!?!?!?!?
Thanks!

Similar Messages

FURIOUS! Warning: Undo Bug and Auto-Save Bug

So I'm pretty ticked off right now. I generally liked FCPX and its changes contrary to many others' opinions, but I just came across a bug that ultimately was worse than I thought.
During my editing process, at some point I was unable to undo changes. It was greyed out in the toolbar, and Command+Z wasn't working. It was annoying, but I didn't think much of it or bother to restart FCPX because I was in the zone and didn't want to stop. Eventually, I decided to restart FCPX to see if I could fix the bug with a lull in my edits. It closed out as normal.
When I re-opened FCPX, I found out that my project was at an EARLIER state. From what I can guess, when the undo bug happened. So, during that period of time, NOTHING was being saved. Since you CANNOT auto-save (I know you can duplicate a project, but Im not interested in that, I just want to save a copy manually), there is no way I can recover my edits. I lost about an hour or so worth of edits. Since FCPX doesn't support "versions" yet either, there is no way I can retrieve it.
I do not know if this is a bug due to 10.7, nor do I really care. I sent a bug report because this needs to get fixed. I consider you do the same but AT THE VERY LEAST, be mindful of this bug. If you suddenly can't start undoing, either STOP IMMEDIATELY or duplicate your project (maybe that would work). I'd hate to have someone else go through this problem too.
Sorry if this message is written poorly, like I said, I'm pretty ****** that this key function (Apple's ONLY way to save) failed.

Thanks guys for the tips. Unfortunately though stuck, I don't know if the finder trick will work. Remember, I never really had the file LOST, the changes were simply not writing to the actual .fcp file. So if I copied it in Finder, I think it would just copy the .fcp file which is currently not getting saved to anyway. Maybe duplicating the project in FCPX would work, but again I think that just takes the .fcp file and duplicates it. If it's not writing to it, then its a moot point. Oh well.
As with anything that frustrates anyone, I've cooled off haha, and doing the re-edits actually seemed to turn out easier and better then second time (you know, as theu naturally are I suppose haha). Obviously all sorts of problems happen with technology, its just a shame that its a bug that revolves around the ONLY save feature haha.
HOWEVER. I think I have replicated the problem, and MIGHT know the source of it. Or at least one. If someone wants to try this and confirm this? I'm running OSX 10.7 and FCPX 10.0 (obviously), however I encourage someone with 10.6 to try it too.
I noticed the "undo bug" (and thus the auto-save bug) happens when I took one of the "fader handles" (I don't know the actual name, but its the little marker-like icon found at the start and end of audio tracks, which when dragged, let you easily make a fade in or out. If you take a fader-handle, an drag it ALL the way BEYOND the length of the clip, it should get stuck. Youll notice you cant easily make a change to it again, and you can't undo it. I think this is what causes the problem, as I think this happened twice to me.
If this is it, I hope I can find a way to flag this for Apple so it can get fixed! At the very least we can be concious of it.

I have just purchased Aperture 3.4.5 and notice that the Inspector pane and Toolbar are in greytones. No Colour !! any ideas?

I have just purchased Aperture 3.4.5 and notice that the Inspector pane and Toolbar are in greytones. No Colour !! any ideas?

It has been this way since Aperture 3.3. It is not bug, but a feature. New designed icons to fit in with the grey design of Lion and Mt. Lion.
And sorry, there is no built-in option to restore the colorful look of previous Aperture version.
See this thread: https://discussions.apple.com/message/18648069?ac_cid=tw123456#18648069
Regards
Léonie

I went to "view" and "toolbars" and mistakenly unchecked the menu toolbar on Firefox how do I get it back?

I was trying to turn off some of the unused toolbars on Firefox on my husband's Windows laptop. I mistakenly unchecked the menu tool bar under "view" and "toolbars" Now I can't figure out how to get it back.

If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear
Go to "View > Toolbars" and check-mark "Menu Bar" with a click if you want to make that permanent
See [[Menu bar is missing]])

BUGS and FEATURES REQUESTED. Please add to it.

I've been using the z10 for the past couple weeks and wanted to start a thread of comprehensive Bugs and Features Requested.
I've labeled Bugs by letters (A,B,C...) and Features Requested by numbers (1, 2, 3...) so that others can add sequentially.
BUGS
(Not listed in any particular order)
(A.) Contact App adds current date as birthday. When I edit my contact, the current date gets listed as the birthday in local contact.
(B.) Duplicate telephone numbers listed. Telephone numbers show up twice in my Contacts (e.g.., if I have the contact's cell saved in (000) 123-4567 format and the person has the number listed in Facebook, I get a duplicate entry of +10001234567).
(C.) Telephone numbers and emails are not actionable in Web pages. In webpages, I can't click on telephone number to call (e.g., I look up a phone number for a restaurant). I should be able to easily call or copy into the Phone App or E-mail App.
(D.) Auto capitulation for words on the word substitution list is wrong. For example, when the word substitution contains more than one word. I have "ru" change to "are you" but if the first letter is capitalized (R) then both words become capitalized words (Are You). I used to have shortcuts like "mysig" to create email signatures with legal disclaimers but I can't do that now.
(E.) Backspace delete doesn't work consistently. The Shift+Delete function seems only to work after moving the cursor. This feature is the Alt+Del action to delete words after the cursor.
(F.) All Emoticons do not list. Emoticons do not all fit on the the two screens (lists) of emoticons. I.e., two columns are missing from view and can be seen when sliding (swiping) between the lists. Also, sometimes when I select an emoticon, it doesn't correspond with the picture of the one I intended. I believe this error is related. As a separate note, there should be a way to see the underlying symbols of the emoticon. (Often times, other people don't have BlackBerrys so I'd like to know what symbols would be sent--my prior 9800 would show the characters as i scrolled through them).
(G.) BlackBerry keyboard doesn't always work in input fields. E.g., certain Web pages. (I found a work around; two finger swipe up from the bottom makes the keyboard appear)
(H.) Sent messages stay unread. This seems to be an issue when an app sends an email (e.g., share article). The email with the sent indicator (checkmark) stays bold and I have listed 1 unread email. I can't mark as read/unread but if I delete the sent email, my unread message gets cleared.
(I.) Contact already added but I get the option to add instead of view contact. For some contacts, I get the option to add to contacts in the action menu cascade when that person is already in my address book. This bug is for emails and text messages.
(J.) Cannot call from text message. When I hold a text message and select call under the action menu cascade, the OS opens up the phone app but doesn't call.
(K.) Composing messages by name. When composting messages, the input must be by first, middle and last name. It should be, instead, by string and include nickname. E.g., if the person's name is "Andrew B. Cameron" I must type the name in as such. I can't type in "Andrew Cameron" or "Andy Cameron."
Features Requested and Suggestions for Improved User Experience
(In no particular order)
1)      Option to reply in different ways from the Call List. Be able to select a name in a call list and have options to call, text or email the person. The action menu allows calls to other numbers but I can't choose to text or email the contact instead. Sometimes, I missed a call and want to reply via text because I’m not able to talk. (Long hold on the Torch 9800 trackpad button brought up the action menu allowing me to call, text, view history, add to speed dial, e-mail, delete, etc.)
2)      Option to reply in different ways from the Hub. Related to above, when selecting an item in the hub, have the option to contact the sender or caller with multiple different ways.
3)      Only show number once in contacts application. Tap on the number to bring up the "action" cascade menu with options to call or text the number. Why is the same number listed twice (once to call and below again to text it)?
4)      Timestamps for individual text messages. I can't tell exact time on individual text message if it comes in near the time of another text. All messages are in one "bubble."
5)      Ability to select MMS or text for a message. Sometimes I write a text longer than 160 characters and I prefer it to be sent in one message (i.e., MMS mode) rather than being broken into one or more standard text messages. I had this ability with my 9800.
6)      Send button should be moved for text messages!!! Why the heck is it right underneath the delete button?!? Or next to the period button? I often times have accidentally hit send when composing text. It's very annoying and embarrassing. (Also, what happened to the ability to hit enter for a return carriage to next line?)
7)      Bigger magnifying glass. My finger is often over the area I need to place the cursor. I find it difficult and erratic to place the cursor.
8)      Select all option. Add the option to select all text in action menu cascade.
9)      E-mail recipients and message headers. Difficult to tell if you are one of many email recipients. Can we have a way to pull the email down to see the list of recipients rather than have to click to expand the header info? I know this request is a little picky, but that's how it was done in the previous BlackBerry OS which I preferred; it is easier and faster to pull the e-mail down and 'peek' to see which e-mail box received the message, message status, from and to fields. This change would be consistent with BB's flow/peek rather than click.
10)   Browser navigation. Hold down back arrow to get a list of recently visited websites similar to a desktop browser.
11)   Dark/Night mode. A night mode (maybe in the drop down menu) to change all the white and bright backgrounds to black or dark which would be helpful when reading/viewing things at night in bed/etc.
12)   Number of contacts. Ability to see how many contacts I have.
13)   What happened to groups or categories? I'd like to have back the ability to filter or see categories and also a way to contact everyone in a category. E.g., family or friends or coworkers, etc.
14)   Shutter sound mute. I was at a wedding and wanted to take pictures during the ceremony but the shutter would was too loud.
15)   East Asian Language Input. I bought my parents two Samsung Galaxy S3 phones over the weekend because they need Korean input (and the Kakao talk app). (BTW, S3 is a great phone but I prefer the Z10 after having the weekend to use the Android phones).
16)   Ability to freely place icons on the homesreen. Currently, icons are forced top left-right-to-bottom. I prefer to space my icons out.
17)   Add a contact to the homescreen. I'd like to place a shortcut (similar to a Webpage) to the homescreen for a contact which will open up the contact. Android allows this feature and so did my previous 9800.
18)   Search Contacts by nickname. The contacts app doesn't allow me to search by, e.g., Andy, even if I have that as my contact's nickname. The previous OS allowed this type of search which was very helpful.
Finally, as a note, I've been using the BlackBerry Z10 for the past 2 weeks and it's a great platform. I just bought two Samsung Galaxy S3 phones over the weekend for my parents so they could use the Korean language input and related features so I spent a lot of time with the Android platform, setting it up and teaching them how to use it. The S3 is a great phone too.
I prefer, however, the way BlackBerry has done their OS 10 and the integrated management of messages.
It's too bad that BB doesn't have Korean input and apps like Kakao Talk or I would have considered it for them.
The BlackBerry 10 is a great platform and I look forward to the continual improvements that will only make the experience better.

This is a great post.
I couldn't have written it myself better.
I'm also in dying need of Korean input as I can't communicate with my Korean friends.
But I second every point.
I hope the tech teams are reading this.

Changing the size of fonts in InDesign's menus and toolbars?

Is it possible to change the size of fonts in InDesign's menus and toolbars? I'd love for the Control Panel at the top to be a bit easier to read.

Thanks Bob, didn't see it anywhere but figured it was worth asking. I think the size is a little biased toward people with better vision than me but I guess I'll have to live with that.
Jon

When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data. This problem does not occur when I manually sync music to my phone. Is this a common bug, and if so; is there a fix?

When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data on the phone. This problem does not occur when I manually sync music to my phone only when I access imatch. Is this a common bug, and if so; is there a fix?

yes it is. you can sign out of itunes account then sign back in. use http://support.apple.com/kb/ht1311 to sign out.

Java PDK Bugs and Issues

Here are some bugs and issues I've run across using the JPDK that I thought other
developers should be aware of. The following information comes from using JPDK
1.1 with Oracle Portal Version 3.0.6.3.3 Early Adopter on Windows 2000.
1) Do not use a colon character (':') in the String value returned by the method getTitle( Locale l ) in the class Portlet. Registering the provider will appear to succeed, but when you view the Portlet Repository you will get the following error message:
An Unhandled Exception has occurred. ORA-06502: PL/SQL: numeric or value error:
character to number conversion error
Your provider and its portlets will not appear in the Portlet Repository when this error occurs.
Perhaps other characters will cause this error as well.
2) The Provider class method initSession() is supposed to propagate the array of returned Cookies back to the browser. The Cookies are never propagated to the browser. This is a huge road-block for our application and we need to have this problem fixed as there is no workaround.
3) There is a limit to the number of portlets you can have per provider. I initially wrote a provider class that managed 19 portlet classes. However, after registering the provider only 17 portlet classes were loaded by the provider and/or displayed by the Portlet Repository. I had to create a second provider to manage additional portlets. The second provider worked out fine for me because I have 5 portlets that are for "administrator" users only. Moving these portlets left 14 portlets for the first provider to manage.
Note: I don't know if this error occurs using the provider.xml method of implementing a provider and its portlets. My provider and portlets are implemented directly using the Java class API's.
4) Sometimes I will receive the error "Meta data missing for portlet ID=<number>" when a portlet is rendered for the first time. This error does not occur often but when the error happens two conditions are met:
a) The portlet is being rendered for the first time
b) The HTTP and Web Assistant NT services have recently been started.
This error is obviously caused by some timeout but increasing the timeout values
for both the provider and the portlet has no effect. This error may be restricted to the NT platform.
The following notes are not bugs but issues to be aware of:
1) Make sure you have the "sessiontimeout" parameter defined when declaring the initArgs of a servlet in the zone.properties file and you intend to register your provider with a "Login Frequency" of "Once per User Session". For example:
servlet.urlservlet.initArgs=debuglevel=1,sessiontimeout=1800000
If you leave off the session timeout, Oracle Portal will call your provider's initSession() method for every request constantly generating new a session ID.
2) Currently there is no means to check whether a ProviderUser has administrative
privileges. This feature would be extremely helpful for restricting which portlets a user has access to when the provider's getPortlets() method is called.
3) Currently there is no Java API for storing user and global preferences in the
Oracle database. The JPDK provides a PersonalizationManager class but the method
of storing the preferences needs to be implemented by the developer.
The default Personalization Manager persists user preferences as a file
to disk. However, this method opens up security holes and hinders scaleability.
We got around the security and scalability issues by using Oracle's JDBC
driver to persist user and global preferences to custom tables in the underlying Oracle database.
I would appreciate hearing from anyone who has run across the cookie propagation issue and has any further insights.
Thanks...
Dave White
null

David,
Thank you for your feedback on the JPDK. The information you provide helps us understand how customers are using 9iAS
Portal and its development kits. I apologize for the delay in getting back with you. Since you are using the Early Adopters
release, we wanted to test a few of the bugs and issues on the production release of 9iAS Portal.
1) Using a colon character (:) in the String value returned by the method getTitle(Locale l) returned the ORA-06502 error is a
known issue. This issue actually occurs within 9iAS Portal and should be resolved in the first maintenance release scheduled
for 9iAS Portal.
Waiting on reply from Nilay on #1
2) The Provider class method initSession() not propagating the array of returned cookies back to the browser is an issue that we are currently working on. This bug has been fixed for most cases in the first maintenance release. A 100% fix of this issue is still being worked on.
3) The limit to the number of portlets you can have per provider was an issue in the Early Adopter release, but is no longer an issue with 9iAS Portal production. Upgrade to the production release and you should no longer see this problem.
4) The error "Meta data missing for portlet ID=<number>". I have not seen or heard about others receiving this same message. For this error, can you upgrade to the production version and let me know if you still receive this error message. At that time we can check for differences within the configuration.
Not bug, but issues......
1) You have made a good point with the sessiontimeout parameter. The JPDK uses servlet 2.0 APIs which does not provide access to the sessiontimeout. Currently, you will need to specify the sessiontimeout parameter in the zone.properties file.
2) This is true. Currently there is no means to check whether a ProviderUser has administrative privileges. This is on our features list for future enhancements.
3) This is also true. The DefaultPortletPersonalizationManager was created as a default runtime for developers not used to writing portlet code. It allows developers to write portlet code without concentrating on the underlying framework. Once a developer becomes more experienced with the JPDK and portlet environment, we encourage them to create their own
customization manager. This includes changing how the portlet repository is stored or changing how the user customization is
handled and where it is stored. You have no limitations as long as you follow the guidelines of the PortletPersonalizationManager interface.
I hope this information helped. Again, we appreciate and welcome this type of feedback, it helps us not only locate bugs and issues, but also helps prioritize our enhancement list.
Sue

Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

Please report via Apple Feedback. These are user forums. You aren't speaking to Apple here.

Crystal reports not rendering properly and toolbar is also not visible in firefox 21.0

my application works fine in chrome and internet explorer when it comes to crystal reports but Firefox is not rendering them properly. they are disturbed and toolbar is also not visible. i am using visual studio 2008 for development and the crystal reports that come with it. it works fine on local system but have issues when deployed on online server. all my clients are facing the same problem. they have to use alternate browser for printing reports. But i would be happy if Firefox renders them correctly. Anyone can help?

i made this change in my code using Visual studio 2005 VB
rpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response,
False, "Title you want")
it make me a PDF and i dont need the cristal report bar to print it
i hope you help you

N80: Feeds Client bug and possible solution

Hi everyone,
I've found what appears to be a bug in Feeds Client V. 3.0(0529) in my Nokia N80 Internet Edition.
I've added a couple of feeds when connecting to a WLAN, but when I tried to read those feeds again, this time away from that WLAN range, it didn't even gave me the choice of network connection: it just tried to go back to the same connection without asking.
I deleted that network's entry in Tools->Network->Access points. Because I only had two feed address saved, I've also deleted them.
But this time the phone didn't even allow me to go into the Feeds folder!
What appeared to solve the bug was something like this.
1) Create a new bookmark with the feed address (e.g. Google News). You can delete it later.
2) Start browsing the feed. Your browser should ask what is the network to use, if you've configured that way.
3) You get the feed list, hopefully. If you choose Back, the mobile will show the feed list you've saved (in my case, only the feed I'm reading because I've previously deleted all of them).
This seemed to do it. If you want to be sure, save the new feed in the Feeds folder again, and delete the previous feed.
Hopefully this will allow you to go around the bug and let the Feeds Client think it should access the network connection you want. The problem is, it still only lets you read the feeds through the network connection you've selected!
Regards,
J.B.

A better test would be to move one at a time (Desktop folder) until you find the codec causing the trouble.
Two of my guesses:
Out of date DivX
VLC plug-in

Scripting bugs and anomalies in Acrobat Pro XI

I've downloaded the trial version of Acrobat Pro XI and starting testing it out with various scripts and actions. The results are far from good, I'm afraid.
Here are some of my findings, so far:
1. The Action Wizard is very cumbersome and un-intuitive. It took me several minutes to figure out how to change the default setting to a specific folder, and I still can't find where to select the input file types to be processed. Also, what's the relation between the "Default option" and the Add File and Add Folder buttons? Very strange UI decisions there. I don't care about panels and dividers, but I do want the actual commands to make sense*.
2. Another very bad decision is moving the Save command to a different section. What's the point of making it just another "tool" in the list? If you want to use it, you'll want to use it at the end of the process, not somewhere in the middle... And as it stands now, if you don't add it explictly, the changes are not saved at all.
3. After running an Action, some of the files remain open in the window. I was looking for a Close File command, but couldn't find any such thing. Is this a bug?
4. I'm running a script that processes some files. After finishing, the files are automatically saved and overwritten, even though I haven't added that command yet to my script. Very serious bug!
5. After running some scripts and actions, working with hidden files, I've tried to access app.activeDocs. The result was an infinite loop of this error message:
After a while I had to close down Acrobat from the Task Manager.
I must say I'm very disappointed with this release, so far, and would not recommend anyone to upgrade to it.
* Speaking of commands that don't make sense, what's the point of the Document JavaScripts command in the Action Wizard? All it does is open that window... This doesn't make sense at all in an automated action. It should have given you the option to automatically embed a piece of code in a file, not let you do it manually.

Hi there,
Your feedback is interesting as this is the very first time we receive some negative feedback about Actions in Acrobat XI.
First of all what do you mean by "what's the relation between the "Default option" and the Add File and Add Folder buttons" ?
If don't have the time to go through the help nor documentation here a brief answer:
- Default option allows the author of an action to specify the behavior and settings for the command. In the case of Add File and Add Folder it will drive user running the action about the type of location the file(s) should be retrieved from: a scanner, cloud repository, a specific folder, etc. This is a bit of improvement over Acrobat X, but not a significant change in the behavior.
I hope this is what you were questionning about.
"Another very bad decision is moving the Save command to a different section"
While this may not be convenient for you, I don't think it's enough to state that it's been a very bad decision since most users like it. It's also more flexible and more powerful. It makes it possible for instance, to save a document with a different naming convention at different points of the action which is an important improvement for some users. I am sure that after you've played with it a little bit more you will agree with that.
"After running an Action, some of the files remain open in the window"
Files that have been loaded by the Action playback should be closed, unless that have something special. Otherwise it could be a bug.
" I'm running a script that processes some files. After finishing, the files are automatically saved and overwritten"
It can only be because the JavaScript contains instructions to save the files, or the Action does. Otherwise it would be a bug and I'd be curious to know more about it as Acrobat is VERY robust about this.
Please provide the files in question I'll be happy to spend time debugging the case.
"After running some scripts and actions, working with hidden files, I've tried to access app.activeDocs. The result was an infinite loop of this error message:"
This is out of my scope and will ask around me how it's supposed to work. Hopefully we'll get an answer from the script folks quickly.
Please share files and way to reproduce the issues you meet, considering that you are the first person to provide such negative feedback there might be some misunderstanding somewhere.
Best,
Luc Leroy

Captivate 7 - The Exit Bug and a Solution

Hey Everyone,
I wanted to take a second and share some good information I found in regards to SCORM and the Exit functionality in Captivate 7. Below is the blog post that shows how to make the Adobe Exit functionality "SCORM Compliant" and solved my issues when uploading my project and getting them to exit. Hope this helps
Captivate 7, Exit Bug and a Solution
Several of our Inquisiq R3 users have alerted us to the fact that courses developed with Captivate 7 published to HTML5 and SWF do not close properly when using the “Exit” button, forcing the user instead to manually close the browser window by clicking the “X” in the upper-right corner of the browser window.
Through our investigation into this issue, it appears that the process that Adobe has implemented when clicking the “Exit” button is to simply attempt to close the content window and rely on the LMS to capture and commit the session data. Nowhere did we see that the content was actually calling the “LMSFinish()” [SCORM 1.2] or “Terminate()” [SCORM 2004] methods in the LMS’s SCORM API to commit the lesson data to the LMS as required by the SCORM specification.
Adobe uses their own defined function, “DoCPExit,” to close a lesson window. This method contains a “window.close()” call and additional logic to “bubble up” the command through the frame parents (if they exist and also contain the “DoCPExit” method - presumably because they would also be Adobe-published content files within your package).
There are several flaws to this approach.
By not calling “LMSFinish()” or “Terminate(),” the content is, by definition, not SCORM conformant. Part of the minimum requirements for conformance are that the content calls the initialization method “LMSInitialize()” in SCORM 1.2 or “Initialize()” in SCORM 2004 and the termination method “LMSFinish()” in SCORM 1.2 or “Terminate()” in SCORM 2004. The LMS is not required to clean up the data left behind when the content fails to make this call. So if your LMS doesn’t take this additional step (of setting ‘LMSFinish’ or ‘Terminate’ if the lesson does not), your data will be completely lost…i.e. no record of you taking the lesson will be recorded.
The call to close the browser window will fail if the LMS is running the content within a frame or iframe. Since the SCORM specification allows content to be launched in frames or iframes (in addition to new browser windows), lessons need to be able to accommodate this scenario. Even with the “bubble up” logic, once the call reaches the top most content window, and the next parent window in line is the LMS container page, the call will no longer be passed and a “window.close()” call will be fired within the framed page. When this call is made, nothing will happen as a framed page cannot close the browser window using this command. Through our investigation, we’ve learned that at least 4 other well-known LMSs have experienced this particular issue.
Ironically, the solution that we’ve discovered is not only SCORM conformant, but also very simple and follows what we would consider to be SCORM “best practices”. The foundation and logic for the solution is already contained within the published Captivate files (and it is the same solution whether you publish to SCORM 1.2 or SCORM 2004).
We simply modify the “DoCPExit” method that is contained within the “Utilities.js” file to call the “Finish()” method. Just replace all the code appearing between the “{“and the “}” as you see here:
function DoCPExit(){ Finish();
The “Finish()” method that we have inserted is, as mentioned, already contained within the published Captivate files and contains the logic to properly set the exit parameters and correctly identify whether the content is SCORM 1.2 or SCORM 2004; it will therefore make a call to the correct close method (“LMSFinish()” or “Terminate()”) accordingly. Once the LMS has received this command, it should take care of removing the content properly, leaving no need for any “bubble-up” logic or window close calls within the content code.
Overall, if the lessons you develop with Captivate 7 work as expected and required in your LMS, there is no need to implement this change. However, if your lesson’s Exit button is not working as it should, and/or you are losing progress and status data when closing the lesson, the fix described here should resolve all those issues.
The biggest issue here is that since we’re changing published code, the next time you update and publish that same Captivate project, you have to remember to change that published function code AGAIN, as Captivate will simply publish the default code.
We have been in touch with the Captivate team to discuss this problem and they are investigating. We would hope a patch to address this flaw would be released in the near future
All credit of this fix goes to http://blog.icslearninggroup.com/2013/10/captivate-7-exit-bug-and-solution.html

Try clearing out your project cache (Preferences > General > Clear Cache) then republish using the option to Force Republish All Slides.
If that doesn't resolve the issue, you may be seeing the early stages of project file corruption. Check the suggestions in this post about troubleshooting issues where you may need to copy all slides to a new blank project shell to try and strip out corruption:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques

When links are clicked, they do not fully display the NEW page until the mouse is moved.I know it is a current bug, and appears in no other browsers that I know of.

It was pointed out that my links do not function correctly on Firefox on a Windows platform. When links are clicked, they do not fully display the NEW page until the mouse is moved! I have now observed it for myself on my fathers PC running Windows XP on Firefox.My PC is on Windows7
It is the 5 version of Firefox, so I know it is a current bug, and appears in no other browsers that I know of.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4+ you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

IOS 8 bugs and fails

hello, I got the iPhone 6 Plus 128GB and plugget it to iTunes and restored from backup of my previous iphone 5s...
the first 3 months it was okay bit when my iPhone started filling the bugs started to appear and one after one until they became
a big number :
-while scrolling in a web page you accidentally tap on text or maybe even you want to copy... the selection of the txt gets stuck and the options baths gong there and it doesn't go away no matter what you do.
-i tap on app to open it, the icon of the app (it can be any app you choose) before the app launches the icon of the app fills the screen for three seconds and then the app opens.
--random restars
-Notification Center sometimes doesn't slide down its just as if it's not there..and also the pref pane doesn't slide up. You have to reset to fix it.
-facetime hangs after call, doesn't hang up nor does anything else until you reset your iPhone
-60FPS setting on iPhone 6 plus when enabled it causes the camera to freeze while switching between shooting modes.
-ramdom apps crash randomly
-i change the wallpaper (lock screen) and go there and fin the lock screen is black
-icons get mixed up in a chaotic way after downloading new apps
and the list goes on i'lol post the rest when I remember them, iOS 8 full of bugs and I've been thinking to do a clean instal of iOS but I can't because I have to renter my mass words and I have 128gb of contents to restore back... And it's too much work and tooIchya time and it's not guaranteed that is s will work...
was was

I followed these instructions to do the downgrade to 8.2 - worked fine, and restored my ability to use the iPad. Of course, it still keeps asking me to upgrade, so the real problem isn't solved:
http://www.gottabemobile.com/2015/04/08/how-to-downgrade-to-ios-8-2-from-ios-8-3 /

Bug and toolbar

Similar Messages

Maybe you are looking for