Bug in Flash? Mono sounds can't seek past first half (and report sound.length wrong)

I'm working on an mp3 player in AS3 and I just discovered
what appears to be a bug in the Sound class when loading mono
mp3's. The "length" property is reported as twice the actual length
while the file loads. The moment it's complete, the length property
snaps to the correct value.
Also, even after the file is completely loaded, it is
impossible to seek to anywhere past the halfway point of the audio.
This means that if a user "pauses" the audio and then hits the play
button again (anywhere in the second half of the file), it won't
actually play.
I found a post about this from someone on this forum back in
2005, but it doesn't seem to be resolved. I've been specifically
testing 22khz mono mp3's. 44khz stereo ones work fine, so my guess
is that it has something to do with Mono.
Can anyone help? I can post examples and source code if
necessary. Thank you! --Ben

I'm banging my head because I can't find a solution to make my arch-install detect an audio CD
I assume that you mean the optical drive. I don't see a /dev/sr0 in /dev
Does it show up with lsblk or parted -l?
Looks like it's a LiteOn drive.
You can play an audio CD.
mplayer cdda://
mpv cdda://track[−endtrack][:speed][/device] −−cdrom−device=PATH
An audio CD doesn't have a mountable file system on it.

Similar Messages

HT4623 I am in the process of updating my iphone4 to ios7 it seems to have updated but i can't go past the terms and conditions page even though I have agreed to them can anyone help

I am in the process of updating my iphone4 to ios 7, it has completed the process but i can"t get past the terms and conditons page although I have agreed to them both - can anyone help?

*** I HAVE THE ANSWER ***
You must goto Settings > General > Reset > Reset All Settings ... this worked 100% for me and once that is compelte go back and try to pass the terms and conditions, you will see the "agree" button in the bottom right hand corner

How can I get the second group and report totals in Matrix report?

Hi,
I have created a matrix report with 2 break Groups.
Iam getting columns totals for the first group, but not for the second group and the report totals.
How can I get the second group and report totals for each month?
Thanks.
Ram.

Hi Ram,
If you want a total at any group-level, go to the particular group in the data model, insert a summary column in the group, and select
Reset At > appropriate Group Name
For report level summaries, you must create the summary column outside of all groups.
Navneet.

How i can make forms read form nls and reports read from anather

hi evrey one
how i can make forms read form nls_lang and reports read from anather nls_lang ,
I think that this property is found in the file format .ini,
I forgot his name,
Is there one has found this information,
pleez share.
thanks.

At a minimum, the creation of the TcpClient will need to change its parameter to the name of server you want to use:
TcpClient tClient = new TcpClient("gmail-smtp-in.l.google.com", 25);

How can I save my iMovie Project to a DVD or Flash Drive which can be played on a PC and any DVD player

I have an iMac, purchased in January 2011. How can I save an iMovie project to a DVD or Flash Drive which can be played on a PC or any DVD player

I will give you a basic primer, not going to get to in depth, as far as parameters, size of project, or the storage size of your usb flash drive, etc.
1. you have your finished iMovie project. Under iMovie>Share menu. Choose export using quicktime.
2. make Movie self contained. This way your Mov, Mvi, etc files will be part of the movie and it can play without having to reference the events, because it is actually there.
3. so, now on your desktop ( or any where else set up quicktime to save your file) you will see a quicktime file.
Drag & Drop that file on to the icon of your USB Flash Drive, etc.
4. Details that I omitted because I admit I am not well versed. Most Likely that quicktime file is larger than your USB Flash Drive. You have to use one of quicktime compression work flows, also if you open the just created quicktime file. It will open quicktime player and under the File>Export you have to options. I have a Movie that was 42GB 1080P, I exported it as a 720P, so it would still be playable on a large screen and now the new file was less than 2.5GB.
5. Oh, no i just realized that the file should be playable on a PC, as long as the PC has quicktime for windows installled and you left that USB formated at MS DOS as it came originally, or a PC will not recognize it. Will it open up on your Blu-Ray Player that has a USB port, not sure. Since there is no menu. but, perhaps just pushing play will start movie.
Hope this is of some help.

Does the iPad2 come with a flash drive? I have the iPad first one and it won't let me play games on facebook, Does the iPad2 come with a flash drive? I have the iPad first one and it won't let me play games on facebook

Does the ipad2 come with a flash drive? I have the first iPad and can't play games on facebook because apple doesn't support a flash drive

You are talking about Flash Player, not Flash Drive.
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
 Cheers, Tom

On OSX 10.5.8 and I can't cut & paste or click and drag, HELP!

Hi all,
Please help! I can no longer click and drag icons or cut and paste. I'm running OSX 10.5.8 on an '07 macbook, and I really do not want to loose everything, is there a solution??? At the same time I have had a little trouble with the net and downloading files.
Is there a fix?? I'm desparate

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Can't get past login screen and accidentally added a Firmware password?

Hi, please can you help me.
Up until about a week ago my Mac Mini Server (running snow leopard server) was working fine, but when I re-started my user name and password stopped working (the panel shakes).
I booted the computer from the Install DVD and changed the password. When I restarted this still didn't work. I booted again from the DVD and changed the password again, it came up with a warning about the password also needed to be changed elsewhere.
I had a look round the utilities on the DVD and saw the Change Firmware Password (I know now this was a massive mistake!), so I changed that and clicked add!
Now I cant boot from the DVD as all the Keyboard start-up commands don't work.
I have tried starting up, holding down Command-Option-O-F. This didn't work.
Checked to make sure the Keyboard is working.
I also tried removing all RAM and holding down Command-Option-P-R and waited for this to chime 3 times.
I cant find any thing else to try on the internet.
I think to solve my initial problem, I need to Boot from the DVD and change the ROOT password, somehow login as the ROOT account then change the passwords. Is this right?
Any help would be greatly appreciated,
Thanks,
Regards Andy

If you can remember the firmware password you set:
Boot the computer with the install DVD in the drive (I'm assuming you have the external optical drive, based on your previous post) and hold down the OPTION key. You will see a screen with an input field. Enter your firmware password here, then press enter. The boot manager will load, showing you the internal HD as well as the DVD. Boot from the DVD, and go back into the firmware password utility. Enter the password in the old password field, and leave the new password fields blank. This will remove the firmware password.
If you *can not* remember the firmware password you set:
Open up the computer and remove only 1 of the 2 installed RAM sticks. Boot the computer holding COMMAND + OPTION + P +R and wait for 3 startup chimes. This will remove the firmware password.
Once you have removed the password and are booted to the DVD:
See this article: http://support.apple.com/kb/ht1274
You want the section labeled "Resetting the original administrator account password."
Message was edited by: John.Kitzmiller to fix spelling mistakes.

How can I disable the 'First Run' and 'Whats New' pages from showing after updating Firefox for all users that log onto a system.

I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.

Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
*http://kb.mozillazine.org/browser.startup.homepage_override.mstone

The person who stole my phone is using data on my account--can I find him or her and report to police?

Yea, I left my phone on the Amtrak train when I got off at Birmingham Michigan, realized it within minutes, raced the train up the tracks to the next stop Pontiac it had already been cleaned and the phone was stolen. Since then, though I erased the phone because of confidential information, but the thief is still having internet use. can it be found or its position located by GPS?

You can track your phone through Find my iPhone and then see if the police will find that person from what you find through the application.. I'd suggest you call your cell phone carrier so you can suspend your phone and put it on the stolen list so they don't use your data

Can install APEX in OAS Forms and Reports Services?

Hi, I need to know: Can install APEX in OAS Forms & Reports?, thanks a lot....

Hi,
1. OAS Forms and Repors Services run on Oracle HTTP Server (OHS). You can use OHS to connect to Apex
2. Apex is not installed in the OS, its installed inthe Oracle Database. In other words, you install is by connecting to sqlplus as sys as sysdba
3. Install Apex in the instance that is holding the tables and views that are being used in the Oracle Forms/Reports.
Hope that answers.
Make sure you read the installation guide and follow it verbatim.
Regards,

Just installed iPhoto 09 Can't get past first screen

I just installed iPhoto 09. When I first opened the program after installation, I was prompted to upgrade my photo library, I did so. On the next screen ("Look up photo locations"), I am prompted to click yes or no, but all I get is the spinning ball -- the program doesn't respond. I have tried rebooting the computer; I have tried deleting the com.apple.iphoto.plist Can't get beyond "Look up photo locations" no matter what I do -- and I don't even care about the locations!
Any other ideas? I have a Time machine backup (I hope!) I've never had to restore from it before, so may need guidance wit that too!
THanks in advance for your help. I'm beginning to regret my purchase...

Log into another account on your Mac and see if iPhoto will open and run there. If not then a reinstall of iPhoto is indicated. To do so you'll have to first delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder, reinstall iPhoto from the disk it came on and reapply the latest updaters.
If it does run OK in the other account then there's something in your main account that's the culprit. It could be a preference file other than iPhoto's. Here's how to see if that's the case:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
4 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button.
Click to view full size
5 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.

Can't get past the time and date intial set up screen can anyone please help?

We purchased Apple TV last night, hooked everything up according to the directions, until we get to the Setting Time and Date Screen, which Apple TV- for more than 12 hours now, has been trying to establish. We've set the time zone both manually and automatically, I have emailed and tweeted Apple Support but no help so far, this is my last plea before I return it.
Any help would be appreciated.
Thanks

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Can't get past first step of downloading firefox itself

I click on the link to download firefox and it says it copies the files in the first step but then never proceeds to step 2. Why?

The best way to download Firefox is here
* getfirefox.com

Can someone read this crash log and tell me whats wrong please

Anonymous UUID:       7F4336E4-C6DA-0238-7240-8EEE20983BFD
Thu Aug 7 16:08:47 2014
panic(cpu 1 caller 0xffffff80082dc24e): Kernel trap at 0xffffff7f8a16f9f1, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef811ed3bf00, CR3: 0x000000000af8f000, CR4: 0x0000000000000660
RAX: 0xffffff801a37e000, RBX: 0x0000000000000000, RCX: 0xffffff801a37e000, RDX: 0xfffffffffffffffe
RSP: 0xffffff811ed3be80, RBP: 0xffffef811ed3bf30, RSI: 0x000000000001e558, RDI: 0x0000000000000000
R8: 0x00000000e0000000, R9: 0x0000000000000005, R10: 0x0000000000000920, R11: 0xffffffffffffffff
R12: 0x0000098becc6e2c0, R13: 0xffffff8103ea5148, R14: 0x0000000000000000, R15: 0x000000000001e558
RFL: 0x0000000000010097, RIP: 0xffffff7f8a16f9f1, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef811ed3bf00, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff811ed3bb10 : 0xffffff8008222f79
0xffffff811ed3bb90 : 0xffffff80082dc24e
0xffffff811ed3bd60 : 0xffffff80082f3746
0xffffff811ed3bd80 : 0xffffff7f8a16f9f1
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xffffef811ed3bf30
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelCPUPowerManagement(217.92.1)[CF28958D-CA8A-3A79-911C -78217F5DDAF2]@0xffffff7f8a16d000->0xffffff7f8a197fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x0000000008000000
Kernel text base: 0xffffff8008200000
System model name: MacBook5,1 (Mac-F42D89C8)
System uptime in nanoseconds: 10496577769475
last loaded kext at 10313995154133: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8a5ad000, size 49152)
last unloaded kext at 10380528075061: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f8a5ad000, size 32768)
loaded kexts:
com.apple.filesystems.smbfs 2.0.2
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AGPM 100.14.28
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.XsanFilter 4
Model: MacBook5,1, BootROM MB51.007D.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.32f8
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x01BA, 0x202020202020202020202020202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2553GSX, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS21N
USB Device: Built-in iSight
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:

You, or someone, has installed the incorrect spec ram. Your MacBook 5,1 requires
RAM Type:
PC3-8500 DDR3
Min. RAM Speed:
1066 MHz
You should replace it with the correct ram. I'd recommend ram from either OWC http://eshop.macsales.com or Crucial http://www.crucial.com

Bug in Flash? Mono sounds can't seek past first half (and report sound.length wrong)

Similar Messages

Maybe you are looking for