BUG: NEXT BUTTON IN REPORT (PORTLET)

If I run a report as a portlet and pass a parameter to the page containing the portlet and press the next-button of the report, the parameter is not passed again to the page... My intention is to write my "own" provider implementation to adjust page_url of the portlet_runtime_record in the show_portlet method. Is there an easier workaround available?

Select customize and set the number of rows to 9999. I'm guessing that it's currently set to 10.

Similar Messages

NEXT button on report portlet shows 10 rows-maximum rows per page=9999

I created a report with the DB Provider portlet. I set the maximum rows per page to 9999 when displayed as a portlet and as a full page. I put the portlet on a page and it only shows 10 rows and then the next button.
If there are exactly 10 rows I get the next button. If I click it the next page loads with no data. If there are less than 10 rows there is no button.
If I create a new portlet it does not do this. I'm only having the problem with one portlet now but I've seen it in the past. I usually just build the portlet again but I would like to know how to fix it.
I can't customize the portlet because of bug #3467032.

Select customize and set the number of rows to 9999. I'm guessing that it's currently set to 10.

Next Button in Report gives error

We called Report as Application Component
in the content area. When click the NEXT
Button to see the next page, It gives the
Error Like:
Name "Report_Name" is longer than 30 chars.
But we have given the Report Name less than
30 chars.
Is it bug or anyother way to proceed.
Thanks,

Hi,
With the reports it is not possible. If you want to achieve something like this you should make of dynamic pages to develop the output and the buttons.
Thanks,
Sharmila

Position of 'Next' button in Report

Is there a way of adding a 'Next and 'Previous' button in a 'Report from a wizard' to the top of the resulting data records in addition to the ones below?
Cheers,
Arnt

Hi,
With the reports it is not possible. If you want to achieve something like this you should make of dynamic pages to develop the output and the buttons.
Thanks,
Sharmila

Report wrapped in Portlet: Crashes on Next Button

I have a application report based on a query that I published in a portal. When I run this report in the application creation page the report runs fine, even if I run it as a portlet. When I add the portlet to a page and navigate to the page it runs fine however when I press the 'Next' button to display the next set of records I am presented with the following error: java.lang.ArrayIndexOutOfBoundsException: 1024
at javax.servlet.ServletInputStream.readLine(ServletInputStream.java:69)
at oracle.webdb.page.PageBuilder.getMetaData(PageBuilder.java, Compiled Code)
at oracle.webdb.page.PageBuilder.process(PageBuilder.java, Compiled Code)
at oracle.webdb.page.ParallelServlet.doGet(ParallelServlet.java, Compiled Code)
at oracle.webdb.page.ParallelServlet.doPost(ParallelServlet.java:128)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Code)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Code)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java, Compiled Code)
at org.apache.jserv.JServConnection.run(JServConnection.java, Compiled Code)
at java.lang.Thread.run(Thread.java, Compiled Code)
Does anyone have any ideas why this is happening.
Thanks,
Ryan

Ryan,
Not sure about the actual reason or remedy for this but I was able to rectify this by running the "owaload.sql". If the "Portal" installation is for the first time in the machine then you need to run this script.
NOTE: If you run "Owaload.sql" then a lot of objects will become "Invalid" in your schema (e.g. in portal30, portal30_sso).
You will have to compile them.
But before trying this pls check the following:
a) Are there any "Invalid" objects in your installation.
b) Are you using the correct "Modplsql" and apache versions.
c) Apploader, Chartservlet & Parallel files are at proper place (apache_home/Jserv/servlets)
Thanx,
Chetan.
null

"Next" button error in Report portlet

I create a report from SQL query and publish it as a portlet then I add it to a page.
everything works fine until I click Next button on the bottom of the portlet. After I do it I get the following error:
Error: The servlet produced the following error stack.
java.lang.ArrayIndexOutOfBoundsException: 1024
at javax.servlet.ServletInputStream.readLine(ServletInputStream.java:69)
at oracle.webdb.page.PageBuilder.getMetaData(PageBuilder.java, Compiled Code)
at oracle.webdb.page.PageBuilder.process(PageBuilder.java, Compiled Code)
at oracle.webdb.page.ParallelServlet.doGet(ParallelServlet.java, Compiled Code)
at oracle.webdb.page.ParallelServlet.doPost(ParallelServlet.java:128)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Code)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Code)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java, Compiled Code)
at org.apache.jserv.JServConnection.run(JServConnection.java, Compiled Code)
at java.lang.Thread.run(Thread.java, Compiled Code)
Are there any workarounds for this problem?
null

Try putting a call to the procedure in a dynamic Html page. You can also search the support pages with the error code. A more detailed explaination is there.
According to Oracle this is fixed in the Portal Release 3.0.8.

Tabs Disappear when "Next" on a Report (shown as Portlet) on a tab page is displayed

Posting Again for attention - Please let me know if this is not the right forum for it.
I am working with the new Portal 3.0.8 version on NT.
I have a Page with tabs and on one of the tab-page is a report (displayed as a portlet) that has a "Next" button at the bottom to show the other rows of the report. In the earlier version (3.0.7), when we clicked on this Next, we would get some JSP errors (discussed in the thread http://technet.oracle.com:89/ubb/Forum81/HTML/000048.html )- this is fixed(?) in the new version (3.0.8).
But - now when I click on the "Next" button, the entire tab region is replaced by the next set of rows of the report and the tabs disappear. The only way to get access to the tabs now is to hit the Back button of the browser.
Has anybody else experienced this or is it me doing something wrong here ... would appreciate any/all response.
Thanks.
null

Are you sure? I still have that problem, and in their reply to
my TAR Oracle filed a bug 1842058. Other similar bug numbers
are: 1667269, 1799810, and 1747842.
Their last comment was:
"The bugs associated with this issue have been marked as fixed
in then next version of Portal (9.x). This also obliviates the
role of Support. If you would like to have this functionality in
your version of Portal, then Oracle Support will require the
following from you:
1) A new TAR with the request to backport the functionality.
2) A business justification for the backport request."

The "next" button of crystal report viewer does not work

hi
I use crystal report viewer control to show my crystal report on my aspx page.
like:
<CR:CrystalReportViewer id="CRViewer" runat="server" HasRefreshButton="False" PrintMode="ActiveX" DisplayGroupTree="False"
AutoDataBind="True"
SeparatePages="TRUE"
Height="520px"
Width="900px">
</CR:CrystalReportViewer>
however when I try to navigate to next page by click "Next" arrow button on the crystal report viewer toolbar, it only can navigate to the page 2, whatever I click the "Next" button, it still stay on page 2,
actually this report has 10 pages.
On the other hand, if I input the page number, such as 5 on the "goto" textbox, it will jump to page 5 correctly.
Could you give me any good advices to solve this problem?
Thanks.

There are a few threads discussing the issue in this forum. See if these provide some guidance:
"Next Page" wont go beyond page 2 in Html Viewer (Crystal.NET for VS 2008)
Re: Crystal Reports .NET Visual Studio 2005
Problem in CrystalReportViewer
Ludek

Bug when pressing the next button

After I upgraded to 8.0 when I press the next button the player stops and I have to press play again.

This is a simple solution, but this behavior also occurs if you happen to not have all the little boxes next to the songs checked. You can select all, and check them all with one fell swoop.

Problems with report portlet in a page

I have developed a report i Portal. When i run the report standalone it works fine. But when adding the the report as a portlet to a portal page, the next bottom does not work.
When I push the next button I get the error
Error: The servlet produced the following error stack.
java.lang.ArrayIndexOutOfBoundsException: 1024
at javax.servlet.ServletInputStream.readLine(ServletInputStream.java:69)
at oracle.webdb.page.PageBuilder.getMetaData(PageBuilder.java, Compiled Code)
at oracle.webdb.page.PageBuilder.process(PageBuilder.java, Compiled Code)
at oracle.webdb.page.ParallelServlet.doGet(ParallelServlet.java, Compiled Code)
at oracle.webdb.page.ParallelServlet.doPost(ParallelServlet.java:128)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Code)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, Compiled Code)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java, Compiled Code)
at org.apache.jserv.JServConnection.run(JServConnection.java, Compiled Code)
at java.lang.Thread.run(Thread.java, Compiled Code)
Does anyone know anything about this probelm?
Regards
Fredrik

This is a known bug which has been fixed in the 9iAS 1.0.2.1 (portal 3.0.8) release that went out at the beginning of the month. Upgrades to that release are due to go out within the next week or so.

Report portlets displays 10 rows whatever max row setting is applied

I have several reports in my 9.0.2.6 portal where the portlet settings are set to show max 20 rows pr page. When placed on a page these default to showing only 10 rows and then displays the 'next' button. Is there som bug or setting that I should know about?

This happens only when a page parameter is applied to the portlet.

Next button not working properly?

Hi,
I'm new to the user groups, and only an occasional user of Captivate. I'm building an e-learning course, and I have inserted next buttons on each page to let the user control navigation. However, the slides still auto play without clicking next. I've checked the slide properties to make sure that "On slide exit" is set to No Action, already, and have verified that the buttons appear at .1 second, and are active for the duration of the slide.
Any thoughts on why this might be happening?
Thanks!
Jen

Hi Jen
When you look at the properties of the button, is the pause enabled? (it's possible to turn it off and not allow it to pause the slide)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Problem with Next button !

Hi ,
I have done a Portal upgradation from 3.0.6.6.5 to 3.0.7 .
After this i am facing problem with reports where the "Next" button does'nt work on a page. It gives the error as below :
Error: The servlet produced the following error stack.
java.lang.ArrayIndexOutOfBoundsException: 1024
at javax.servlet.ServletInputStream.readLine(Compiled Code)
at oracle.webdb.page.PageBuilder.getMetaData(Compiled Code)
at oracle.webdb.page.PageBuilder.process(Compiled Code)
at oracle.webdb.page.ParallelServlet.doGet(Compiled Code)
at oracle.webdb.page.ParallelServlet.doPost(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at org.apache.jserv.JServConnection.processRequest(Compiled Code)
at org.apache.jserv.JServConnection.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
This problem was not there in ver.3.0.6 .
Thanks in advance .
Regards,
Vijaya
null

Vijayalaxmi,
I had this problem, it's a bug with 3.0.7.
This is my reply from Metalink..
07-FEB-01 10:19:02
<<< iTAR OUT >>> TAR Updated By Analyst!
It seems that you are running into bug 1548075 which produces the same error stack when using Next. This bug has been fixed in Portal version 3.0.8.8.4 and hence you would have to upgrade the portal version.
** Please use Metalink to further update this tar **
** For new issues please raise a new TAR via Metalink **
** Log onto Metalink at http://metalink.oracle.com **
Regards, Matt.
null

Next Button

Hi
I've make a report that show one only row,
when I run as portlet and I press the Next button it's OK, but when I'm running it in a page if I press Next button to show the next record it gives me the following error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 281
Could anybody help me?
Thanks in advance
Antonio

I have the buttons on my iTunes 11. Make sure that the song is not the only song in the album if you browsing in Albums view.

Software demo with next buttons and auto-mouse actions is confusing to viewers

Hi,
I created presentation tools for my co-workers to do a road show type thing of our software. On some slides, they must click a next button to advance, but not on others- this is intentional. However, we got the feedback that users find it confusing to see two cursors- the auto-play one and the one for the computer the presenter is using (if that makes sense?)
I suggested using a different cursor for the demos, but what they would really prefer is that they could advance the demo through a keyboard action instead of clicking that next button (but I assume the next button would still be there, right?)
Does anyone know if this is possible with Captivate 3?
Thanks,
Dee

Hi Dee
You are able to turn off the mouse cursor if you want. This would perhaps eliminate the confusion. You could use a Click Box instead of a Button if you wanted to pause the slide. You may also configure either a Click Box or a Button with a Keyboard shortcut the user would press to move on.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

BUG: NEXT BUTTON IN REPORT (PORTLET)

Similar Messages

Maybe you are looking for