BUG ? - Problems with debugger

Hi,
I am trying to debug my application and put a break-point in one class that belongs to a different package and is filed in an directory that does not belong to this application. The fact is that this breakpoint is being ignored. It seems to be a bug.
Regards.
Fabio

I've a problem similar to this that solved using ojvm instead client.
To configure this Rigth Click i you project -> Project Properties -> Runner -> Choose ojvm in Virtual Machine list.
Best regards

Similar Messages

Bug: problems with the Escape key

Hi all,
In an attempt to get around real estate problems, I set my Dell 24" monitor in portrait mode. Logic 8 behaves as it should most of the time. However, there appears to be a problem with the Escape key. Most of the time, the Tools menu doesn't appear until you mouse out of the editing areas (eg into the menu area above the piano roll).
Clearly, Logic should just take its resolution and screen dimensions from the OS but there appears to be a problem in extreme portrait mode.
I'll report this but wanted to check that I'm not being an absolute and total plonker first. Anybody confirm this behaviour?
Thanks!
Pete

that sounds like a memory issue. have you tried reorganizing memory?

Spark DataGrid scrolling performance problems with debugger

So, i have a DataGrid using the latest SDK (4.5.1) with 500 rows of data and 14 columns. I'm not using any custom ItemRenderers at all; the data is just string and number properties of each data object in an ArrayCollection. When I try to scroll vertically, either by clicking on the scrollbar handle and dragging or by using the arrow buttons, the performance degrades so badly that the application appears to freeze up completely for a few seconds. (I'm on OS X, and I see the spinning beachball icon.) The app then remains so unresponsive as to be pretty much unusable.
The exception to this is when, rather than launching the app as a debug configuration, I just refresh the page so the swf can run without the debugger attached. Detached from the debugger, the performance is great, every time. This is, BTW, using the very latest build of Flash Builder 4.5 Pro; I just installed it last week.
I've tried eliminating various possible causes, and haven't had any luck. I made the data non-bindable, removed all the custom skins and css styling, and even removed event listeners from the DataGrid; none if it seems to make a difference.
Has anyone else noticed this issue? Is there a workaround? If the debugger is to blame (which seems likely), is there some setting that I can turn on or off that will help?
Thanks!
Michael

Hi Michael!
Few days ago I've had the same issue.
My configuration:
Windows 2008 server (i'm working on remote desktop)
Flex SDK 4.5.1
Firefox 8.0 (on Explorer was ok).
Flashplayer version 10.2.153.1
It happened to me only that day (run without debugger, restart application didn't work), but it seems that when I log out from Windows and log in again the problem disappeared.
Best regards
Tom

Any Known Issues/bugs/problems with Essbase 6.5.3

Hi,I would like to know if there are any issues/problems/bugs with Essbase XTD Analytic Services 6.5.3 running on windows 2000 server.Thank you

I'm on NT 4.0. We upgraded last Friday, April 11. Thursday morning April 17 the service Froze. Not sure what caused it but during the evening, one db was disabled because it could not open the pag file after a L0 export. We're investigating.Wayne Bates 913-762-7966

[BUG] Problem with Error message handling in JDeveloper 11.2.1.0

Hello!
I'm Daniel from Brazil.
I have been facing a problem recently to which I see no solution. I need to use a specific component called 'Panel Label and Message' in order to nest three other components which need to be grouped together to work properly (an input text box, a LOV calling 'search button', which searchs and populates the input box, and an output text box which displays text depending on the input field). This works fine!!
The problem comes when I try to place an Access Key that should focus on the input text box part of the group component. In order to do that, I put it on the 'Panel Label and Message' component, and set the 'for' property to the input text box. This too works fine, as when I access it the component redirect the focus to the right place.
Problem is, when the user decides to this specific field (which is required) blank, JDev has problems handling the actual name of the component, and just calls it 'Component', as the screenshots below show. Apparently, for the other error messages that are handled by myself or generated by other means, it deals with the component's actual name just fine. Is there any way around this? Thanks!
'Panel Label and Message' component properties. it9 is the id of the 'Input Text' field component. Access Key set to F.
http://img.photobucket.com/albums/v82/myfireburnsblack/PropertiesErrorBug.png
Error message I get (it's in portuguese). Field has been left blank, and JDev says I have to put something in, but refers to the field as 'Component'. Any other error is handled correctly, as far as I've tested.
http://img.photobucket.com/albums/v82/myfireburnsblack/jdevError.png

Hi Daniel,
You're not the only one who has seen this: {message:id=9938606}
As mentioned in that other thread - I had tested similar use cases and it works for me.
Do you have access to https://support.oracle.com to file an SR?
John

Bug: Problems with attatching with dbx

If you attatch do a process with dbx, another program with the same name as the
one you attach to is before it in the path, than dbx will become very confused.
If no program with that name is in the path it works.
Irritating. Should be fixed.
Took a while before I found out.

Can you please tell what compiler version were you
using?
- RoseSun Studio dbx 7,8,9. All have this problem. 6u2 seems to work.
What c compiler version I use to compile does not matter.
/tmp/A/A.c :
#include <unistd.h>
int f(int x) { return x; }
int main(int argc) { sleep(99); return f(argc) ; }
/tmp/B/B.c
#include <unistd.h>
#include <stdlib.h>
int main(int argc, char **argv)
sleep(99);
return atoi(argv[argc-1]);
( . is in path)
% ( set path= ( /developtools/9/SUNWspro/bin/ $path ) ; cc B/B.c -o B/a.out -g ; cc A/A.c -o A/a.out -g ; )
%cd A
% a.out &
[1] 28966
% cd ../B
% dbx9 -q - 28966
(dbx) where
=>[1] _sigsuspend(0xffbef738, 0x63, 0xffbef748, 0xffbef768, 0x21734, 0xff2cef7c), at 0xff31ec58
[2] libcsleep(0x0, 0x0, 0x0, 0x0, 0x63, 0x10c74), at 0xff2cef84
[3] 0x10c74(0x1, 0xffbef874, 0xffbef87c, 0x20c00, 0x0, 0x0), at 0x10c73
(dbx) list
dbx: warning: No source file
(dbx) quit
detaching from process 28966
Same for all compiler version. Same for all dbx except 6u2.

Problem with watchpoints in new abap debugger

Hello,
when using the new debugger to watch a value-parameter in a form, the debugger stops every time the value of the variable in the watchpoint is changed.
Even when there is an extra condition entered.
Is this a bug, or is it supposed to happen that way because the parameter is passed as a value rather than a reference?
This is a bit hard to explain, so here is a simple code sample demonstrating the behaviour :
REPORT ztestndeb.
data : test type string.
do 5 times.
concatenate test 'A' into test.
write : / test.
perform valueparamform using test.
enddo.
*&      Form valueparamform
*       text
*      -->P_TEST text
form valueparamform using    value(p_test).
* watchpoint for field p_TEST with condition p_TEST eq 'AAA' stops every time value of p_test changes
write : 'Valueparameter : ', p_test.
endform.                    " valueparamform
Our sap version is :
sap version : SAP ECC 6.0
SAP_ABA        700       0011 SAPKA70011
SAP_BASIS      700       0011 SAPKB70011

I am having the same problems with the additional conditions - does anyone know how to get this to work?

Problem with 2 View Objects based on One Entity -Probably a Bug in ADF BC

Hi
I am using JDeveloper 10.1.3(SU5) and adf faces and ADF BC and to explain my problem I use HR schema.
First, I created 2 view objects based on countries table named as TestView1 and TestView2. I set TestView1 query where clause to region_id=1 and TestView2 query where clause to region_id!=1 in the view object editor and then I created 2 separated form on these 2 view objects by dragging and dropping from data control palette.
Now when I insert a record in the form based on TestView1 with region_id set to 1 and commit the record and go to the next form I can see the record in the second form which is completely wrong since it is against the where clause statement of the second form.
I am really confused and the situation is very wired and it seems to me something like bug in adf bc.Am I right.Is there any work around or solution for solving this problem.
Any help would be highly appreciated.
Best Regards,
Navid

Dear Frank,
Thank you very much for your quick response.
Reading your helpful comments now I have some questions:
1- I have commited the record in the database so shouldn't the query of view objects be re-queried?
2- We try to use ClearVOCaches (entity_name,false) in afterCommit of the base entity object but unfortunately it does not work correctly. after that,We got root app module and used findViewObject method to find all the view of that entity (we have found them by using name not automaticlly) and called executeQuery of all views. From my point of view it has 2 big disadvantages. First suppose that this entity is an important entity and 4 or 5 viow objects are based on it. Now, For inserting one record we should re-execute 4 or 5 view which I think makes some performance issues. Besides, If during the development one programmer add a new view object based on this entity and don't add the executeQuery in the afterCommit for this view, again we have the same problem. Isn't there at least a way that automatically refresh all related view objects however the performance issue still exists.
3- You mentioned that this issue is handled in the developer guide. Could you kindly give me a refrence which developer guide you mean and which section I should read to overcome this problem.(I have ADF Developer's Guide for Forms/4GL Developer's Guide , however I search for clearVOCaches and surprisingly nothing was found!!!)
4- Could you please give me some hints that from your point of view what is the best method to solve this problem with minimum performance effect.
Any comment would be of some great help.
Thanks in advance,
Navid

DateTimeAxis min/max bug? Problems with consistent padding. Date Wrapping.

I have been working on a problem with a BarChart object that I've created using dynamic data.
My primary issue is that I can't seem to get the proper min/max values to set for the chart.
To solve this I manually found the min and max of the data set of Dates and set the min and max of the chart. This allowed me to finally see all the floating custom bars (each bar is rendered with a user set fill), however now if I have a bar that extends over a year change the horizontal axis labels do not wrap the date properly, so instead of 2/10 (feb 2010) being the last date, 12/09 (dec 2009) is the last date.
I've been trying to dynamically adjust the padding based upon a change event, but so far to no avail. Partially I think because I'm not sure which event for the function to fire on.
private function dateAxisGen(r:Array):void {
                var min:Number = r[0].startTime.time;
                var max:Number = r[0].endTime.time;
                const PAD:Number = 2;
                const MILLISEC_IN_MONTH:Number = 2629743830;
                const MILLISEC_IN_WEEK:Number = 604800000;
                const MILLISEC_IN_DAY:Number = 864;
                for (var i:int = 1; i < r.length; i++) {
                    var o:OperationXT = OperationXT(r[i]);
                    min = Math.min(o.startTime.time, min);
                    max = Math.max(o.endTime.time, max);
                // Calculates the maximum range, then adds an appropriate
                // padding to the chart via extra time. TODO
                /* var range:Number = max - min;
                if(range >= MILLISEC_IN_MONTH) {
                    dAxis.padding = (MILLISEC_IN_WEEK/1000000)/PAD;
                    dAxis.padding = (MILLISEC_IN_WEEK/1000000)/PAD;
                } else if(range >= MILLISEC_IN_WEEK) {
                    dAxis.padding = (MILLISEC_IN_DAY)/PAD;
                    dAxis.padding = (MILLISEC_IN_DAY)/PAD;
                } else {
                    dAxis.padding = PAD;
                dAxis.minimum = new Date(min);
                dAxis.maximum = new Date(max);
this, however, does not adjust the padding properly when an operation is removed from the list. Not to mention I still have the date wrapping error. It gives me the following error:
Cannot access a property or method of a null object reference.
    at mx.charts::AxisRenderer/measureHorizontalGutters()[C:\work\flex\dmv_automation\projects\d atavisualisation\src\mx\charts\AxisRenderer.as:2244]
    at mx.charts::AxisRenderer/calcRotationAndSpacing()[C:\work\flex\dmv_automation\projects\dat avisualisation\src\mx\charts\AxisRenderer.as:1858]
    at mx.charts::AxisRenderer/adjustGutters()[C:\work\flex\dmv_automation\projects\datavisualis ation\src\mx\charts\AxisRenderer.as:1534]
    at mx.charts.chartClasses::CartesianChart/updateAxisLayout()[C:\work\flex\dmv_automation\pro jects\datavisualisation\src\mx\charts\chartClasses\CartesianChart.as:2239]
    at mx.charts.chartClasses::CartesianChart/updateDisplayList()[C:\work\flex\dmv_automation\pr ojects\datavisualisation\src\mx\charts\chartClasses\CartesianChart.as:1366]
    at mx.core::UIComponent/validateDisplayList()[E:\dev\gumbo_beta2\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8065]
    at mx.managers::LayoutManager/validateDisplayList()[E:\dev\gumbo_beta2\frameworks\projects\f ramework\src\mx\managers\LayoutManager.as:663]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\gumbo_beta2\frameworks\projects \framework\src\mx\managers\LayoutManager.as:736]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\gumbo_beta2\frameworks\ projects\framework\src\mx\managers\LayoutManager.as:1069]
Any help with my problem would be greatly appreciated.
ADDITIONAL INFO:
Alright, so I've discovered that the ONLY time the date wrapping error occurs is when the axis labels contain only the month and year, any other time it places it properly.
Does anyone know where I can report this bug?

Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf.

Problem with JMenus that Persist - Is this a Java bug?

I am having a problem with JMenus that persist. By this I mean
that my drop down menus persist on the screen even after they have
been selected.
I've checked the Java bug database, and the following seems
to come closest to my problem:
Bug ID: 4235188
JPopupMenus and JMenus persist when their JFrame becomes visible
State: Closed, not a bug
http://developer.java.sun.com/developer/bugParade/bugs/4235188.html
This page says that the matter is closed and is not a bug. The
resolution of this matter printed at the bottom of the page
is completely abstruse to me and I would appreciate any
comments to understand what they are talking about.
The code at the end of my message illustrates my problem.
1. Why should paintComponent() make any difference to
Menu behavior?
2. Is this a bug?
3. What's the workaround if I have to paint() or repaint()?
Thanks
Tony Lin
// Example of Menu Persistence Problem
// Try running this with line 41, paintComponent(), and without line 41
// Menus behave normally if line 41 is commented out
// If line 41 exists, menus will persist after they have been selected
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class P2 extends JPanel {
JMenuItem[] mi;
public P2() {
JFrame thisFrame = new JFrame();
thisFrame.getContentPane().add(this);
JMenu menu = new JMenu("My Menu");
JMenuBar mb = new JMenuBar();
mi = new JMenuItem[4];
for (int i=0; i<mi.length; i++) {
mi[i] = new JMenuItem("Menu Item " + String.valueOf(i));
menu.add(mi);
mb.add(menu);
thisFrame.setJMenuBar(mb);
thisFrame.setSize(400,200);
thisFrame.setLocation(150,200);
thisFrame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent we) {
System.exit(0);
thisFrame.setVisible(true);
public void paintComponent(Graphics g) {} //Affects menu behavior!
public static void main(String[] args) {
new P2();

Well, my understanding of the way painting works is that a component doesn't UNPAINT itself. Instead a message is sent to the component under the coordinates of the menu to REPAINT itself.
In your demo program the JFrame is the component under the JMenu. The paintComponent() method of JFrame is empty, so nothing gets repainted.
I added super.paintComponent(g); to the method and everything works fine.

Problem with lenght of text and footer elements displaced (bug?)

I have a problem with the footer of my pages. The footer is composed with elements of the master page and two elements that are page dependant so these elements are defined in each page. All the elements in the footer are marked as page footer elements so they should appear below the main content of the page and all in the same position relative to each other.
But the truth is the main content extends below the top of the footer overlapping it and the page dependant elements of the footer are displaced in the same amount and so these elements do not match in the space reserved for them in the footer.
I think the problem is caused by the text box in the main content being displayed with a bigger height than it appears in the editor. Even worse: every web browser shows the text with a different height so the footer elements all appear displaced differently. I have tried to define the height of the text in pixels (px) instead of percentage (%) but the result is the same. But even with this indetermination, the footer should always appear below the main content and not overlaping (or overlaped) by it, so either this is a bug or I am doing something wrong.
Here is how i see the page in the editor. The grayed out keywords and the "UK Photographers" link of the footer are in the current page. All other elements of the footer (horizontal line(rectangle of 1px height), "facebook - links - contact" links and Copyright notice) are in the master page:
This is how the page appears in Firefox 15 with the text zoom set to default. notice how the footer elements that are defined in the current page appear overlaping those defined in the master page (there should be a 27px space between the end of the text and the horizontal line) and moved down in the same amount than the main content exceeds the footer limit:

I am able to repro this on my end as well. Seems like a bug that we will be fixing in a future release.
Work around would be to make sure that the footer item on the individual pages are above the ones from the master page or put everything on the master page or the individual page.
- Abhishek Maurya

Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun fatha/damma etc. would reverse automatically. Is this a known bug?

Problem with Arabic font: In certain contexts, when writing Arabic with vowel signs (fatha, damma, kasra, sukun) a sequence of sukun + fatha/damma etc. would reverse automatically. Is this a known bug?
Example: عَيْنٌ
would automatically convert to عَيُنْ
Funnily, it doesn't seem to happen here, but it does when entering text in a web interface (using Firefox, font Bayan) and when using Text Edit.
Seems to be a problem of a specific font, as e.g. Arial MS Unicode works fine. Any hints?
Thank you!

Musaafir wrote:
I've no idea how i can even start using arabic vowels on Microsoft Word for Apple
You can't do Arabic on MS Word for Mac. This app has never supported RTL scripts, so you need to use something else. Mellel is best, but Pages 5, TextEdit, Nisus Writer, Open/LibreOffice should work OK.
You switch between languages by using the "flag" menu at the top right of the screen or by using the keyboard shortcuts apple/command plus space. Go to system prefs/keyboard/shortcuts to make sure that is activated.
To see which key does what, you use Keyboard Viewer.
http://support.apple.com/kb/PH13746
You place vowels on letters by typing the key for the vowel after the key for the letter. The vowels are on the option/alt keys, option/alt + a gives you َ

Bug or my setting problem with konsole fonts

I have problem with my konsole after update. It seems like font offset is wrong. Fonts are rendered too low.
http://www.dumpt.com/img/viewer.php?fil … jucjz4.png
Here you can see there should be text _qij on the konsole but as you can see the bottom rows of the font is missing. This happens in every font that I have tried. I wonder if i have some setting wrong or is there a bug?

Same problem here, but it's already reported.
https://bugs.archlinux.org/task/26624
The workaround to "Enable Bi-Directional text rendering" works for me in konsole.

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

As you are asking about it, looks like you do see a problem. So if googling does not provide a solution, you should describe the issue in detail so we can try to help out.

Problem with "date -d" function in bash script. Leopard bug?

I have this really nice rsync bash script that I use to make rotating snapshot backups of my different Ubuntu servers to a single backup server.
I am now trying to use this same script on my Leopard machine, but it seems to have a serious problem with the following lines of code:
lday=`date +'image-%Y-%m-%d-%H' -d '1 day ago'`
lweek=`date +'image-%Y-%m-%d-%H' -d '1 week ago'`
It generates the following error:
date: illegal time format
usage: date [-jnu] [-d dst] [-r seconds] [-t west] [-v[+|-]val[ymwdHMS]] ...
[-f fmt date | [[[mm]dd]HH]MM[[cc]yy][.ss]] [+format]
It's clear that it doesn't like the "-d '1 day ago'" part in my code.
Is there a different way in Leopard to get yesterday's or last week's date in a bash script? Or is this a Leopard bug?
Could someone please help me out? I've be trying to research this for the past 8 hours, but can't seem to find any solution to this problem.
Thanks in advance.

Is there a different way in Leopard to get yesterday's or last week's date in a bash script?
date -v-1d
date -v-7d

BUG ? - Problems with debugger

Similar Messages

Maybe you are looking for