Build the equivalent of a "Microsoft service" but in Java.
Hi,
I need to find the best design ( architecture ) to build the equivalent of a Microsoft Service but in Java.
I do have a database table that need to be scan by a "Service" and if the "service" find any message in this table an email need to be send.
I already have the aside stuff ready to go ( javamail, database, etc. )
Now I need the design to build something which will do :
- automatically starts when computer turn on.
- run in "background" as a service and scan every X given secondes the database to find out new email to send.
I don't think web services are the right design for me, but if I'm wrong just tell me.
Every suggestion are welcome! ( Any technology )
thank you!
you might look into how these guys are doing it
http://wrapper.tanukisoftware.org/doc/english/introduction.html
http://www.alexandriasc.com/software/JavaService/documentation.html
http://www.eworksmart.com/JNT/QuickDocumentation.htm
and check out the notes here
http://www.swtech.com/java/ntsvc/
Good luck
Lee
Similar Messages
-
Why does my status in the upper left say no service but I am connected to my wi-fi
Why does my status in the upper left say no service but I am connected to my wi-fi
No service refers to the availability of cellular service. If there was no Wi-Fi signal you would see only a dot instead of the Wi-Fi fan symbol.
-
Error while building the DC for CAF entity services
Hi all,
I am trying to create entity services in CAS and following the following help document from help.
http://help.sap.com/saphelp_nw04s/helpdata/en/05/3a0741b5b7ee6fe10000000a1550b0/frameset.htm
But While building I am getting following imports errors:
Error:
com.sap.caf.rt.bol.IPersistentBusinessObject cannot be resolved or is not a valid superinterface
com.sap.caf.rt.services.eventing cannot be resolved (or is not a valid type) for the field CarJDO
com.sap.caf.rt.bol.da.jdo.JDODADataAccessService cannot be resolved or is not a type
changedData cannot be resolved ,CarJDO.java
com.sap.caf.rt.bol.da.DataAccessFactory.DATASOURCE_LOCAL_DA cannot be resolved CarJDO.java
The method removeACL(String, String) is undefined for the type CAFPermission CarServiceBean.java
loadByCustomKeys(Car) is undefined for the type IDataAccessService CarServiceBean.java
Can anyone help.Hi all,
I am trying to create entity services in CAS and following the following help document from help.
http://help.sap.com/saphelp_nw04s/helpdata/en/05/3a0741b5b7ee6fe10000000a1550b0/frameset.htm
But While building I am getting following imports errors:
Error:
com.sap.caf.rt.bol.IPersistentBusinessObject cannot be resolved or is not a valid superinterface
com.sap.caf.rt.services.eventing cannot be resolved (or is not a valid type) for the field CarJDO
com.sap.caf.rt.bol.da.jdo.JDODADataAccessService cannot be resolved or is not a type
changedData cannot be resolved ,CarJDO.java
com.sap.caf.rt.bol.da.DataAccessFactory.DATASOURCE_LOCAL_DA cannot be resolved CarJDO.java
The method removeACL(String, String) is undefined for the type CAFPermission CarServiceBean.java
loadByCustomKeys(Car) is undefined for the type IDataAccessService CarServiceBean.java
Can anyone help. -
Can anyone help me with this? I feel like Adobe has totally abandoned its old paying customers. Afterall, this is the ONLY WAY I can get info on the product. They've stopped even supporting direct customer service, leaving it up to "volunteer" customers to do it.
Are there any apps that will give me the same capabilities I've already paid for without paying for them yet again? !Hey jonr26897887,
We are really sorry for the inconvenience that is caused to you.
Please let me know what version of Acrobat have you been using.
Have you deactivated the software from the old computer before installing and activating on the new one?
What exactly is the trouble that you are facing?
Please specify some more details so that we can help you out.
Regards,
Anubha -
I purchased the PDF to Word export service.I got a word download of my PDF-but can't edit it
I bought the pdf to word export service but got no instructions. I was able to down load a word doc x version of my pdf from Adobe, but have no instructions on how to edit it, or how to save the document to my computer. Help please!!!.
Hi Joe,
I have some great documents that will assist you:
'Getting started' guide
FAQ
Let me know if you have further questions!
Regards, Stacy -
I can't start listener in the Control Painel/Admin Tools/ Services
Windows XP - Home Edition (I know it´s not the better but came with my laptop)
I installed the Oracle 10g and I don't know why I have 3 listener as services. Its services showed me different messages when I tried start it:
1. OracleOraDb10g_home1TNSListener: Could not start the 2. OracleOraDb10g_home1TNSListener service on Local Computer
2. OracleOraDb10g_home1TNSListenerORCL: The OracleOraDb10g_home1TNSListenerORCL service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performace Logs and Alerts service
3. OracleOraDb10g_home1TNSListenerSID_LIST_LISTENER: The OracleOraDb10g_home1TNSListenerSID_LIST_LISTENER service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performace Logs and Alerts service
====PATH======
Path=C:\oracle\product\10.1.0\Db_3\bin;C:\Program Files\oracle 8i\bin;C:\oracle\
product\10.1.0\Db_3\jdk\jre\bin;C:\oracle\product\10.1.0\Db_3\jdk\jre\bin\classi
c;C:\oracle\product\10.1.0\Db_3\jdk\jre\bin\classic;C:\oracle\product\10.1.0\Db_
3\jlib;C:\oracle\product\10.1.0\Db_3\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C
:\oracle\product\10.1.0\Db_3\jre\1.4.2\bin\client;C:\oracle\product\10.1.0\Db_3\
jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\ATI Technologies\ATI Control Panel;%java_home%\bin;C:\Program Files\Commo
n Files\Ulead Systems\MPEG;C:\WINDOWS\system32\gs\gs8.13\bin
====REGISTRY======
TNS_ADMIN I set as Binary Data in the HKEY_CURRENT_USER\Environment with the path C:\oracle\product\10.1.0\Db_3\NETWORK\ADMIN
====LISTENER.ORA======
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.17)(PORT = 1521))
====TNSNAMES.ORA========
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.17)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
====SQL.ORA========
NAMES.DEFAULT_DOMAIN = 192.168.0.17
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
=======OS CONFIGURATION================
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 23-MAR-2006 08:23
:44
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.17)(PORT=1521)
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Ethernet adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . : myhome.westell.com
IP Address. . . . . . . . . . . . : 192.168.0.17
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
C:\>
Please, if somebody knows this problem I need a very urgent help. Thank you very much.Thanks ALL, I GOT IT, but I used other solution.
Since I installed and uninstalled the Oracle several times, it keeps also many different Services for the listener. I don't know why, it didn't create a Service for my actual instalation with its path. In other words, all the services remained in the services.msc panel, had the path that was already removed from the Windows folder.
Then what I did, was that I picked one service, took its name (OracleOraDb10g_home1TNSListener), went to regedit to [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\OracleOraDb10g_home1TNSListener] and simply changed the image path that was setted for the one that was removed (C:\oracle\product\10.1.0\Db_2\BIN\TNSLSNR ) for mine that is installed right now
(C:\oracle\product\10.1.0\Db_1\BIN\TNSLSNR). Nothing more and finally works.
I have tried something in the services.msc panel before, as you can see in this forum at the thread "I can't start listener in the Control Painel/Admin Tools/ Services", but I never got
success.
Appreciate your time!! -
Can't build the package: ideviceinstaller-git 20120913-1
Hello,
I'm trying to build the package ideviceinstaller-git 20120913-1 but I get the following error:
patching file src/ideviceinstaller.c
Hunk #1 FAILED at 698.
1 out of 1 hunk FAILED -- saving rejects to file src/ideviceinstaller.c.rej
==> ERROR: A failure occurred in build().
Aborting...
there is a similar error reported in the comments of the package in the AUR but it should be solved.
I'm using a fresh installed archlinux with all the packages up-to-date
any idea?That's the danger of using patches with vcs pkgbuilds. The code has changed so the patch is no longer valid. The maintainer will need to update the patch.
-
Microsoft Service Pack 2 - not all versions are equal; how to update to the latest one "safe
I posted this under another topic where it was relevant, but thought the instructions I got from Microsoft were useful (as was my experience in using them as I sent back a reply to them with the problems I encountered [none of which were particularly bad]):
One important point to note is that not all Windows XP SP2 upgrades are equal.
I had a different issue and spoke to Microsoft, who advised me to uninstall the version of SP2 I had and reinstall the newest version (the old version was about 70mb, the new one nearly 250mb).
Apparently the old SP2 had quite a few problems with it; I've found the new one to be "simply stress free" since installing...
The SP2 file name I installed (ie the newest at the time I did it) was "windowsxp-kb835935-sp2-enu".
Here's their instructions - I disagree with the way round that they suggested downloading the update (ie I would strongly advise downloading the update and having it sitting on your desktop before doing anything!!! - please see my feedback email to them that follows (you will note that I had problems connecting to the internet after uninstalling the earlier version; this, combined with the fact that I could barely read what was on the screen would have given me a major inconvenience had I not done this)!!! (and don't blame me if it goes horribly wrong - it's also worth double-checking that the version of SP2 the email links to is the most up to date. I've had a quick check myself, and it does indeed appear to still be the most up to date):
MICROSOFT'S EMAIL (make sure you also read my reply below):
MESSAGE:****************************************** ****************************This is an email from Microsoft about your support incident.When replying to this address: + It helps us if you do not include the original message + Please keep the case number (SRxxxx) in the subject lineThank youMicrosoft Product Support Services ******************* The message from Microsoft follows ****************Hi Gregory,Firstly uninstall SP2 by going to Start>Control Panel>Add/Remove Programs and then reinstall it in a clean boot.. Click Start >> Run >> In the run dialog box type msconfig and then click ok 2. Put a dot in selecti've startup 3. Uncheck all of the check boxes that become available except Process System.ini file and Load system services 4. Go to the Services tab along the top, click Hide all Microsoft Services 5. Then disable any remaining services 6. Click apply and then close 7. Finally select yes, this will start in a clean boot. 8. Then go to (http://www.microsoft.com/downloads/d...DisplayLang=en) and download and install Service Pack 29. To return your PC to normal, open the System Configuration Utility, click "Normal Startup", click OK and restart. Then restart your computer and try accessing updates againPlease let me know the results of these methods, particularly if there were any steps that you were unable to complete successfully.
MY REPLY:
HiI successfully carried out the installation on Saturday.A few minor problems ensued (the second one may have cause a novice user real problems! Certainly caused me some concern whilst working through it!). I had to reinstall ATI drivers from scratch (for Radeon 9800 Pro); this was however the only set of drivers that appeared to "detach" itself. The main problem here was that instead of using the usual standard VGA driver (which it does when I uninstall it once a month to install updated drivers), it used some other driver that made the screen very difficult to see (especially on blue backgrounds!). Running ATI's total uninstall program sorted this out however, and fortunately I had the last update package from ATI still on my system. After uninstalling and reinstalling there appeared to be no further video problems.2. After installing SP2 (and before installing above), whilst I was in the process of getting everything up and running (eg installing the security updates) the system randomly froze about 4 or 5 times; the only way to sort this out was to use the power button. I traced this problem to Windows changing my wireless networking settings so that it handled everything; I have a Netgear adaptor the software for which usually controls this (Netgear Smart Wizard). Basically the two were trying to do the same task and causing crashes; on switching Windows management off, things settled down (the Netgear driver did not need to be reinstalled).3. As a minor point, after the upgrade and installing all other updates, I noted that Microsoft Update was no longer running; I had to reinstall it from Windows Update and the messages I got whilst installing suggested that it was still partially installed but that there were problems with it. It now works.4. As a final minor point, I attach the Scan log from Registry Mechanic which I ran after everything was up and running; it fixed various problems within the registry. I note that the majority of errors are inconsequential, but note that a few do relate to the various Microsoft installs; maybe the installer program for SP2/ Media Player 0 need to sort these out in future releases? Don't think they're a real problem though!The instructions supplied worked fine; one thing I would suggest is that users are instructed to download the SP2 upgrade pack to their desktop prior to uninstalling the original SP2; I believe that my internet connection problems started after I had uninstalled the original SP2 which may have caused problems downloading the new SP2. It also ensures that the download is successful (eg if the site was down for maintenance); I was advised whilst uninstalling SP2 that about 20 programs/drivers would not work properly after the uninstall and so the immediate reinstall was vital!One thing that seemed to fix after reinstalling was a problem I was having installing Media Player 0; after installing it previously, every time I checked for updates on it the whole program would reinstall. Now however this has fixed. I will let you know if I encounter any further problems, but things all seem to be fine now, touch wood.....!
Hope this helps!Message Edited by gjc26 on 0-27-2006 02:50 AMOne small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G -
When I installed the recent updates for Microsoft Office 2011 for Mac, my iCal calendar was wiped out, as was the calendar on my iPhone. I'd rather use iCal than Office and was attempting to phase Office out altogether. Now, all of my information is on the Office calendar but not iCal. The iCloud version of my iCal calendar is not up to date. In any event, I couldn't figure out how to send that info to the iCal on my mac or my phone. How can I sync my Office calendar info to iCal? If that's not possible, how can I get my Office calendar to sync with my iPhone? All of my sync services are set up in iTunes and on my phone. This happened to me once before and I spent hours on the phone with Apple and on the web trying to work it out. I NEED MY CALENDAR!!!! PLEASE HELP!!!!!
As that's not an Apple product, you may get more help by using Microsoft's Office for Mac forums:
Office for Mac forums
The other concern I have is that Office 2011 requires an Intel-based Mac and you posted in the older iMac (pre-Intel or "PPC") forums. If you have an Intel-based iMac (Apple menu > About this Mac..." will say "Intel" if you do) then I think you'll get faster and more accurate ansers to other questiosn in the Apple forums for newer iMacs here:
iMac (Intel) -
SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu -
Problem building the service with jwsc task on bea 9.2
i am trying to build a web service from a wsdl file,
Firstly i generate the proper artifacts with the wsdlc task as described on bea 9.2 docs,then i run the wsdl task trying to build the service from the artifacts previously generated,
here is the wsdl file,and after there are the error i get trying to build the service.
<?xml version="1.0" encoding="utf-8" ?>
<wsdl:definitions xmlns:types="http://emcs.dgtaxud.ec/webservice/types"
xmlns:ref="http://ws-i.org/profiles/basic/1.1/xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
targetNamespace="http://emcs.dgtaxud.ec/webservice"
xmlns:ws="http://emcs.dgtaxud.ec/webservice"
xmlns:conv="http://www.openuri.org/2002/04/soap/conversation/">
<wsdl:types>
<xsd:schema elementFormDefault="qualified" targetNamespace="http://emcs.dgtaxud.ec/webservice/types"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="startEntityAction">
<xsd:complexType>
<xsd:sequence/>
</xsd:complexType>
</xsd:element>
<xsd:element name="startEntityActionResponse">
<xsd:complexType>
<xsd:sequence/>
</xsd:complexType>
</xsd:element>
<xsd:element name="getEntityActionResult">
<xsd:complexType>
<xsd:sequence/>
</xsd:complexType>
</xsd:element>
<xsd:element name="getEntityActionResultResponse">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ActionSucceeded" type="xsd:boolean"/>
<xsd:element name="ActionResult" minOccurs="0" >
<xsd:simpleType>
<xsd:restriction base="xsd:token">
<xsd:enumeration value="Success" />
<xsd:enumeration value="Error" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="stopEntityAction">
<xsd:complexType>
<xsd:sequence/>
</xsd:complexType>
</xsd:element>
<xsd:element name="stopEntityActionResponse">
<xsd:complexType>
<xsd:sequence/>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<xsd:schema elementFormDefault="qualified"
targetNamespace="http://www.openuri.org/2002/04/soap/conversation/">
<xsd:element name="StartHeader" type="conv:StartHeader"/>
<xsd:element name="ContinueHeader" type="conv:ContinueHeader"/>
<xsd:element name="CallbackHeader" type="conv:CallbackHeader"/>
<xsd:complexType name="StartHeader">
<xsd:sequence>
<xsd:element name="conversationID" type="xsd:string" minOccurs="0"/>
<xsd:element name="callbackLocation" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ContinueHeader">
<xsd:sequence>
<xsd:element name="conversationID" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="CallbackHeader">
<xsd:sequence>
<xsd:element name="conversationID" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="StartHeader_literal">
<wsdl:part name="StartHeader" element="conv:StartHeader"/>
</wsdl:message>
<wsdl:message name="ContinueHeader_literal">
<wsdl:part name="ContinueHeader" element="conv:ContinueHeader"/>
</wsdl:message>
<wsdl:message name="startEntityActionSoapIn">
<wsdl:part name="startEntityActionParameters" element="types:startEntityAction"/>
<wsdl:part name="entities" type="xsd:base64Binary"/>
</wsdl:message>
<wsdl:message name="startEntityActionSoapOut">
<wsdl:part name="startEntityActionResponseParameters" element="types:startEntityActionResponse"/>
</wsdl:message>
<wsdl:message name="getEntityActionResultSoapIn">
<wsdl:part name="getEntityActionResultParameters" element="types:getEntityActionResult"/>
</wsdl:message>
<wsdl:message name="getEntityActionResultSoapOut">
<wsdl:part name="getEntityActionResultResponseParameters" element="types:getEntityActionResultResponse"/>
<wsdl:part name="report" type="xsd:base64Binary"/>
</wsdl:message>
<wsdl:message name="stopEntityActionSoapIn">
<wsdl:part name="stopEntityActionParameters" element="types:stopEntityAction"/>
</wsdl:message>
<wsdl:message name="stopEntityActionSoapOut">
<wsdl:part name="stopEntityActionResponseParameters" element="types:stopEntityActionResponse"/>
</wsdl:message>
<wsdl:portType name="MaintainEntitySoap">
<wsdl:operation name="startEntityAction">
<wsdl:input message="ws:startEntityActionSoapIn"/>
<wsdl:output message="ws:startEntityActionSoapOut"/>
</wsdl:operation>
<wsdl:operation name="getEntityActionResult">
<wsdl:input message="ws:getEntityActionResultSoapIn"/>
<wsdl:output message="ws:getEntityActionResultSoapOut"/>
</wsdl:operation>
<wsdl:operation name="stopEntityAction">
<wsdl:input message="ws:stopEntityActionSoapIn" />
<wsdl:output message="ws:stopEntityActionSoapOut" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="MaintainEntitySoap" type="ws:MaintainEntitySoap">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="startEntityAction">
<soap:operation soapAction="http://emcs.dgtaxud.ec/startEntityAction"/>
<conv:transition phase="start"/>
<wsdl:input>
<mime:multipartRelated>
<mime:part>
<soap:body parts="startEntityActionParameters" use="literal"/>
<soap:header wsdl:required="true" message="ws:StartHeader_literal"
part="StartHeader" use="literal" />
</mime:part>
<mime:part>
<mime:content part="entities" type="application/octet-stream"/>
</mime:part>
</mime:multipartRelated>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getEntityActionResult">
<soap:operation soapAction="http://emcs.dgtaxud.ec/getEntityActionResult"/>
<conv:transition phase="continue"/>
<wsdl:input>
<soap:body use="literal"/>
<soap:header wsdl:required="true" message="ws:ContinueHeader_literal"
part="ContinueHeader" use="literal" />
</wsdl:input>
<wsdl:output>
<mime:multipartRelated>
<mime:part>
<soap:body parts="getEntityActionResultResponseParameters" use="literal"/>
</mime:part>
<mime:part>
<mime:content part="report" type="application/octet-stream"/>
</mime:part>
</mime:multipartRelated>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="stopEntityAction">
<soap:operation soapAction="http://emcs.dgtaxud.ec/stopEntityAction" style="document" />
<conv:transition phase="finish" />
<wsdl:input>
<soap:body use="literal" />
<soap:header wsdl:required="true" message="ws:ContinueHeader_literal"
part="ContinueHeader" use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="MaintainEntity">
<wsdl:documentation>Asynchronous web service for maintaining entities.</wsdl:documentation>
<wsdl:port name="MaintainEntitySoap" binding="ws:MaintainEntitySoap">
<soap:address location="https://seed.dgtaxud.ec:8443/SEEDWS/entity/MaintainEntity.jws"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
the errors i get:
build-service:
[jwsc] JWS: processing module /MaintainEntitySoapImpl
[jwsc] Parsing source files
[jwsc] Parsing source files
[jwsc] 1 JWS files being processed for module /MaintainEntitySoapImpl
[jwsc] C:\DOCUME~1\PAPAGE~1\LOCALS~1\Temp\_1mu7ug\seed\webservices\maintainecontract\MaintainEntitySoap.java 31:69
[jwsc] [ERROR] - A Document Bare style operation must have exactly one non header IN Parameter.
[jwsc] C:\DOCUME~1\PAPAGE~1\LOCALS~1\Temp\_1mu7ug\seed\webservices\maintainecontract\MaintainEntitySoap.java 41:15
[jwsc] [ERROR] - A Document Bare style operation must be declared Oneway if it returns void.
[jwsc] C:\Documents and Settings\papageorgopoulos\Desktop\emcs latest\MaintainEntityContractServ\webservicefiles\MaintainEntitySoa
pImpl.java 28:21
[jwsc] [ERROR] - A document style operation must not have a non header INOUT or OUT Parameter.
[jwsc] C:\DOCUME~1\PAPAGE~1\LOCALS~1\Temp\_1mu7ug\seed\webservices\maintainecontract\MaintainEntitySoap.java 41:15
[jwsc] [ERROR] - A Document Bare style operation must have exactly one non header IN Parameter.
[jwsc] C:\Documents and Settings\papageorgopoulos\Desktop\emcs latest\MaintainEntityContractServ\webservicefiles\MaintainEntitySoa
pImpl.java 13:8
[jwsc] [ERROR] - javax.jws.WebService.endpointInterface seed.webservices.maintainecontract.MaintainEntitySoap is invalid.
[AntUtil.deleteDir] Deleting directory C:\DOCUME~1\PAPAGE~1\LOCALS~1\Temp\_1mu7ug
for any ideas i would be gratefulOk, thanks Shay. It is ok when I use ' instead of " in my rendering condition, but the page also crashes when there is an ADF table with Empty text attribute value for example: #{bindings.TmetaformatMprogramView1.viewable ? 'No rows yet.' : 'Access Denied.'}. It crashes, says it cannot parse ? same as \ before.
Edited by: nermin on Oct 31, 2008 10:20 AM -
I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.
wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003 -
I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign. How can I fix this problem?
Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.
Maybe you are looking for
-
QSUF (Query string url filter) and SQL Server reporting services report viewer parameters
Hi, this is my issue: I have a SQL Server reporting services web part on a page with a report with 1 parameter, lets say it's a client list Then i have a QSUF that will be used to filter the clients list through the URL However, once i connect the fi
-
How to hide fields in product master data
Hi gurus, could you please tell if it's possible to hide fields in Product maintenance (tr. COMMPR01). It's necessary to hide some fields in a standard Set type. Thanks in advance, Sunny.
-
IT WAS CLEARLY VISIBLE WHEN EVER YOUR COMPUTER CRASHED OR WENT DOWN AND YOU COULD RECOVER ALL YOUR TABS AND THE COMPLETE SET UP THAT YOU HAD WHEN IT WENT BYE BYE.IF IT IS AVAILABLE I CANNOT EASILY FIND IT OR DISCOVER WHERE IT MIGHT BE LIKE IN THE OLD
-
Gray border box around row & column
Cant seem to find in the code or css where to change the default gray border box that appear when inserting a new column or row in my template (dreamweaver html template)...
-
How to enable mouse wheel in arch?? I have a PS/2 mouse with 2 buttons and a mouse wheel used as 3-rd button.