Build up of str files in ScanDir

We have a build up of sevral thousand of these files in ScanDir files.
Looking at several places on groups i have found that two services need to
be running before these can take place.
The storer service and selector service. The selector service is not
present in the list when i do a listser. Present in the list are:-
1) Name = 'DBBackup Service'
serviceType = 'User' (0)
state = 'Stopped' (0)
2) Name = 'Server Configuration Service'
serviceType = 'System' (1)
state = 'Running' (2)
3) Name = 'DBDelete Service'
serviceType = 'User' (0)
state = 'Stopped' (0)
4) Name = 'NDSLookupForDB Service'
serviceType = 'User' (0)
state = 'Stopped' (0)
5) Name = 'Receiver Service'
serviceType = 'User' (0)
state = 'Running' (2)
6) Name = 'Upgrade Service'
serviceType = 'User' (0)
state = 'Stopped' (0)
7) Name = 'Storer Service'
serviceType = 'System' (1)
state = 'Running' (2)
Number of services = 7
<Press any key to close screen>
When i try to manuall start the service with a 'startser selector service'
i get the following error:-
[1/19/05 14:42:22.914] Service Manager: Failed to start 'selector
service', exc
ption ServiceManagerException{string msg="Service \'selector service\' not
foun
in \'ZENWorksInvService\'
process.";}
exception ServiceManagerException{string msg="Service \'selector service\'
not
ound in \'ZENWorksInvService\'
process.";}
Any ideas ?, FYI workstation import is fine.

Julian,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Stuck .STR Files

    Occasionally, I'll find that several days of .str files are backing up in
    the \Scandir directory on different leaf servers. For some reason they are
    not getting copied to the \Scandir\EntMergeDir\. Sometimes, the
    utilization will go up on the server when this happens. If I stop the
    inventory service and delete the oldest .str file and restart the service,
    the remaining .str files will immediately start copying over. I'm assuming
    the last .str file may have been corrupt. Any idea why this keeps
    happening?

    On Mon, 28 Feb 2005 16:38:06 GMT, [email protected] wrote:
    > Any idea why this keeps
    > happening?
    Try enable debugging....
    http://www.novell.com/documentation/...rts/zdprts.pdf
    Marcus Breiden
    Please change -- to - to mail me.
    The content of this mail is my private and personal opinion.
    http://www.edu-magic.net

  • [svn] 3638: Changing the build order of swc file update with dita xml files .

    Revision: 3638
    Author: [email protected]
    Date: 2008-10-14 16:49:56 -0700 (Tue, 14 Oct 2008)
    Log Message:
    Changing the build order of swc file update with dita xml files.
    By default this would now happen during the checkintests target - so "ant clean main" shouldn't get affected.
    To opt out use -Dno.doc=true
    QA: No
    Doc: No
    Tests: checkintests
    Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/build.xml
    flex/sdk/trunk/frameworks/projects/airframework/build.xml
    flex/sdk/trunk/frameworks/projects/flash-integration/build.xml
    flex/sdk/trunk/frameworks/projects/flex/build.xml
    flex/sdk/trunk/frameworks/projects/flex4/build.xml
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/haloclassic/build.xml
    flex/sdk/trunk/frameworks/projects/rpc/build.xml
    flex/sdk/trunk/frameworks/projects/utilities/build.xml

    Revision: 3638
    Author: [email protected]
    Date: 2008-10-14 16:49:56 -0700 (Tue, 14 Oct 2008)
    Log Message:
    Changing the build order of swc file update with dita xml files.
    By default this would now happen during the checkintests target - so "ant clean main" shouldn't get affected.
    To opt out use -Dno.doc=true
    QA: No
    Doc: No
    Tests: checkintests
    Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/build.xml
    flex/sdk/trunk/frameworks/projects/airframework/build.xml
    flex/sdk/trunk/frameworks/projects/flash-integration/build.xml
    flex/sdk/trunk/frameworks/projects/flex/build.xml
    flex/sdk/trunk/frameworks/projects/flex4/build.xml
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/haloclassic/build.xml
    flex/sdk/trunk/frameworks/projects/rpc/build.xml
    flex/sdk/trunk/frameworks/projects/utilities/build.xml

  • NMAS Keeping .STR files from getting to inventory server

    I'm in the testing phases of setting up inventory. My inventory server is up and running great. I installed the latest Zen 7 SP1 IR4 on 12 PC's in a lab to see how things would go. 6 of the 13 would not properly upload their STR files.
    The minimal inventory gets updated and is listed as "scanned" in the status. The log file on the workstation may say "027: Unable to read the sequence number" or in one case I got "063: Transfer .STR file from the Workstation to the Inventory Server failed."
    I've combed the forums for information and answers. It makes no sense at all why some workstations work and some don't. They all have the same NetWare client and ZEN versions.
    After remembering how I couldn't complete the install to the ZEN Inventory server unless I uninstalled the NMAS client on the install workstation. I thought...hmmmm. What if I uninstall the NMAS client on one of the workstations that can't import? Sure enough, right after I uninstalled the NMAS client and rebooted, that workstation started working!
    I went and checked on the client's that were working before and they all have NMAS installed as well. As far as I know we don't use NMAS for anything. The configurations looked the same to me.
    Why would removing the NMAS client fix this issue and why don't I have this issue for all of the PC's? Any ideas?

    Hi,
    casutton wrote:
    >
    > Why would removing the NMAS client fix this issue and why don't I have
    > this issue for all of the PC's? Any ideas?
    Apparently because NMAS in general is failing on parts of your servers.
    NMAS is always used to login, as soon as it exist and is enabled on the
    client. It is pretty much random which server is used (if you have
    multiple), and obviously some of yours have a problem with NMAS. I
    suggest to ask in the mathing eDir or OS forums. It almost certainly has
    nothing to do with Zenworks.
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    http://www.cfc-it.de

  • Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager.  Why ?

    http://helpx.adobe.com/creative-cloud/packager.html
    http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  • A problem happened when building dimensions with Rule File

    Hi All,
    I was trying to build dimensions with the rule file. But it showed the error 1030100, which means "cannot open file".
    I can load data with a data source (.txt). Thus, I assumed that it's a problem to open a rule file.
    I don't think it's the problem about the rule files I wrote since I cannot even build dimensions with rule files in the Sample/Basic database.
    Anyone knows how to solve the problem? Thanks for the help.
    Best Regards,
    Anderson

    854285 wrote:
    Hi Prebhas,
    Here are the error messages:
    Object [Basic] is locked by user [admin]
    Building Dimensions Elapsed Time: [0.016] seconds
    Cannot open file: [E:\Hyperion\products\Essbase\eas\Client\dataload.err]
    Unexpected Essbase error 1030100
    Object [Basic] is unlocked by user [admin]
    p.s. Even I re-install my system is English, the word "Client" is shown in Chinese. Is it possible this is the reason? If so, how I change the folder?
    After I saw this message, I checked the folder and there is no such file. I tried to created one, but it disappear after I tried to build dimensions.
    Best Regards,
    Anderson
    Edited by: 854285 on 2011/4/25 上午 3:27HI,
    E:\Hyperion\products\Essbase\eas\Client\dataload.err
    This path is referred to error message .... it will show the errors in that file...
    and one more thing...
    while adding data source to rule file it will ask you provide a path for the error message...there you can see this path...
    Just check dataload.err file after running the rule file...
    have you associated the out line to the rule file ???
    is that rule file validate fine?
    if not associate it and try...
    Regards,
    Prabhas
    Edited by: P on Apr 25, 2011 4:43 PM

  • .str files

    I have a Windows XPSP2 pc that is constantly causing login errors on a
    server. The only physical sign that I can see that something is trying to
    connect to the server are the massive amounts of .str files being created
    by this workstation.
    We are running 6.5.1 (i know I am behind, but ran into massive problems
    when trying to upgrade zen that is another issue.)
    I have other XP machines but none has caused this problem.
    The amoung of .str files are causing numerous error messages on the server.
    Thanks:
    George

    Gwsorrellls,
    It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
    - You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
    If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Report Builder 1.0 .RDL Files on Report Builder 3.0

    My group has developed a lot of .rdl files using Report Builder 1.0 over the years and we're finally upgrading to Report Builder 3.0 with SQL Server 2014.  Will our old .rdl files still work on the new version?

    Hi ericvanburen,
    According to your description, you want to know if the .rdl file created in Report Builder 1.0 can be available in Report Builder 3.0. Right?
    Report Builder 3.0 is used to create reports in a familiar, Microsoft Office-like authoring environment. It has backward compatibility. You can customize and update all existing reports, regardless of whether they were created in Report Designer or in the
    previous versions of Report Builder.
    Reference:
    What's New in Report Builder 3.0
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Build daily Big flat file using SAP R/3 material master data

    Hi all,
    I must build an interface between SAP R/3 4.7 and an external application
    Daily a flat file must be generated contaning Material data in full exchange mode
    (volume 100 000 materials, <10 fields => ~ File of 30Mo)
    No complex mapping, only format mapping (Ex : Price quantity...)
    I don't know yet if I will use Idocs or BAPI to extract data. However, I'm sure I must use multiple inbound messages because of volume
    After reading documentation, I consider the both following solutions to manage it :
    1) A simple asynchronous interface with a file adapter in construction mode APPEND to build flat file progressively with arrival of SAP messages
    =>
    viable solution ?
    Is there problem of concurrent access to file in such a solution  ?
    (idocs or bapi data will be processed ones following the others )
    2) BPM Collecting and Bundling Messages - One Interface
    (Unlimited Loop with Deadline trigger correspondint to time I must build flat file)
    =>
    Each SAP message is a small message but the outbound XML will represent a 30 Mo flat file => Is it a problem ??
    Which solution do you advise ?
    Is there another ?
    Last question : (more general one)
    In such scenario, I can't see XI-value added comparing a creation of flat file directly with R/3.
    I will generate a big number of idocs, use a big part of XI memory ...
    Can you give me your opinion about it ?
    Thanks a lot
    Best regards
    Jean-Charles
    Message was edited by:
            Jean-Charles
    Message was edited by:
            Jean-Charles

    Hi Jean-Charles,
    >>>volume 100 000 materials, <10 fields => ~ File of 30Mo
    You have a performance task...
    >>>Is there problem of concurrent access to file in such a solution ?
    No, the adapter framework has its own queueing, the message would be stored and executed later. If sequence is important, you can use EOIO as well.
    >>>BPM Collecting and Bundling Messages - One Interface
    BPM is not required in your case, you should avoid becoz of performance task. You can append at file adapter, no problem. Bundling and splitting is even possible at Integration Server without BPM.
    >>>Each SAP message is a small message but the outbound XML will represent a 30 Mo flat file => Is it a problem ??
    Avoid using BAD words
    >>>Each SAP message is a small message but the outbound XML will represent a 30 Mo flat file => Is it a problem ??
    Use the <a href="https://websmp110.sap-ag.de/quicksizing">Quick Sizer</a> for sizing the hardware.
    Regards,
    Udo

  • Can't open Flash Builder - "See the log file" error.

    I have been using Flash Builder 4.5 and for some reason it has stopped opening correctly - I get the following error then it just shuts down.... :
    "An error has occured. See the log file."
    and if i check the log file it refers to then i see the following text:
    !SESSION 2011-06-22 13:53:43.658 -----------------------------------------------
    eclipse.buildId=M20100909-0800
    java.version=1.6.0_16
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments:  -os win32 -ws win32 -arch x86
    !ENTRY org.eclipse.osgi 4 0 2011-06-22 13:53:59.598
    !MESSAGE Application error
    !STACK 1
    org.eclipse.swt.SWTError: No more handles
        at org.eclipse.swt.SWT.error(SWT.java:4109)
        at org.eclipse.swt.SWT.error(SWT.java:3998)
        at org.eclipse.swt.SWT.error(SWT.java:3969)
        at org.eclipse.swt.widgets.Widget.error(Widget.java:468)
        at org.eclipse.swt.widgets.Control.createHandle(Control.java:633)
        at org.eclipse.swt.widgets.Composite.createHandle(Composite.java:305)
        at org.eclipse.swt.widgets.Control.createWidget(Control.java:649)
        at org.eclipse.swt.widgets.Scrollable.createWidget(Scrollable.java:134)
        at org.eclipse.swt.widgets.Control.<init>(Control.java:110)
        at org.eclipse.swt.widgets.Scrollable.<init>(Scrollable.java:75)
        at org.eclipse.swt.widgets.Composite.<init>(Composite.java:95)
        at org.eclipse.ui.splash.BasicSplashHandler.getBundleProgressMonitor(BasicSplashHandler.java :159)
        at org.eclipse.ui.splash.BasicSplashHandler.getContent(BasicSplashHandler.java:265)
        at org.eclipse.ui.internal.splash.EclipseSplashHandler.init(EclipseSplashHandler.java:86)
        at org.eclipse.ui.internal.Workbench$8.run(Workbench.java:782)
        at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
        at org.eclipse.ui.internal.Workbench.createSplashWrapper(Workbench.java:798)
        at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2467)
        at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
        at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
        at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
        at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
        at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
        at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
        at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
        at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
        at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
        at java.lang.reflect.Method.invoke(Unknown Source)
        at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
        at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
        at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
    This is incredably frustrating as you can imagine as it effectively means i cant work anymore, it is clearly some kind of problem with eclipse but i have no idea what.
    I have tried re-installing Flash Builder twice and no luck.
    Can anyone help with this???
    Thanks !!!!
    Elliot.

    There is a similar thread with exact same stackstrace and problmes reported with earlier verison of FB. You can check it here http://forums.adobe.com/thread/832073. Thre is also representation of Adobe engineers on this thread. Aprarenlty there are certain updates(Eclipse / java) that FB doen't encourage, post FB is installed in stanadlone mode and workarounds are suggested on this thread to overcome this problem. If you are workign in plugin environment with FB, I guess updates are not affecting FB installtion. Please try out the solutions presented on this thread and let us know.

  • ColdFusion Builder with case sensitive file system on Mac?

    Hi there,
    I tried to install CF Builder on my MacBook Pro (Intel), OS-X 10.5.7 with case sensitive file system. Installation went smoothly, but, when I try to launch CF Builder, I get an error saying that the "architecture is not supported". Is it just nor possible to have CF Builder on a case sensitive fs?
    Thank you
    Chris

    I am having the same issue and logged in here to see what the deal is.
    After I installed cfbuilder my flex builder crapped out as well.
    The cfbuilder logs (which were conveniently scattered throughout my system for no reason) report that I am running:
    java.vm.version               == 1.5.0_19-137
    But if I run "java -version" in terminal I get:
    daves-macbook-pro-2:~ Dave$ java -version
    java version "1.6.0_13"
    Java(TM) SE Runtime Environment (build 1.6.0_13-b03-211)
    Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02-83, mixed mode)
    "Is JDK 1.5 available in the system"
    Definale "available"...
    Does it exist? yes
    Is it set to default? no

  • Can Document Builder parse an XML file from a URL?

    Warning: Java newbie here...
    My problem is that I am able to parse an XML file if it is copied into my project, but not if it is a full URL. Here is what I got so far, that works.
    import java.io.*;
    import java.net.*;
    import javax.xml.parsers.DocumentBuilder;
    import javax.xml.parsers.DocumentBuilderFactory;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    import org.w3c.dom.Node;
    import org.w3c.dom.NodeList;
    try {
        File file = new File("path/to/file.xml");
        DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
        DocumentBuilder db = dbf.newDocumentBuilder();
        Document doc = db.parse(file);
        doc.getDocumentElement().normalize();
        NodeList nodeLst = doc.getElementsByTagName("Names");
        for (int s = 0; s < nodeLst.getLength(); s++) {
            Node parentNode = nodeLst.item(s);
            if (parentNode.getNodeType() == Node.ELEMENT_NODE) {
                Element parentElmnt = (Element) parentNode;
                NodeList nameElmntLst = parentElmnt.getElementsByTagName("Name");
                //etc.
    } catch (Exception e){
        e.printStackTrace();
    }So building off of this I have tried to parse an input stream like this:
    URL url = new URL("http://example.com/file.xml");
    InputStream is = url.getInputStream();
    DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
    DocumentBuilder db = dbf.newDocumentBuilder();
    Document doc = db.parse(is);which gives me the following error
    [Fatal Error] :-1:-1: Premature end of file.
    LOG: HME receiver connected
    org.xml.sax.SAXParseException: Premature end of file.
    I also even tried to write the file locally like this:
    URL url = new URL("http://example.com/file.xml");
    HttpURLConnection urlcon = (HttpURLConnection) url.openConnection();
    urlcon.connect();
    InputStream is = urlcon.getInputStream();
    File file = new File("path/to/file.xml");
    OutputStream out = new FileOutputStream(file);
    byte buf[] = new byte[1024];
    int len;
    while((len=is.read(buf))>0)
        out.write(buf,0,len);
    out.close();
    is.close();
    DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
    DocumentBuilder db = dbf.newDocumentBuilder();
    Document doc = db.parse(file);This gives the same error.
    If anyone can point me in the right direction I would forever thankful. I've tried search Google and the Sun forums, but haven't quite found the solution. I think it is because I need to try something else completely. Thank you for reading.
    ~~~~ Jeremy

    jmose wrote:
    If I copy the page, it works as shown in the first code block. In the third codeblock the file is never even created, so I cannot tell if that works or not.So: having the parser access the URL fails, and having some other Java code access the URL also fails in the identical way? That suggests the problem is simply accessing the URL via Java code. Presumably when you downloaded the data from the URL, you used a browser to do it and not wget or something like that?

  • Flash Builder won't replace file in script

    So I'm trying to build an application using augmented reality but I keep running in to a problem.  I want to be able to swap out the marker, but when I change the file path it doesn't take effect. In other words, the original file is "pattern1.pat" and I want to exchange it with "pattern2.pat" within the line [Embed(source="pattern1.pat", mimeType="application/octet-stream")].  But when I make the change and run it, it won't change the marker, it just keeps referencing the previous file (pattern1.pat) when I test. Why!?
    I am using Flash Builder 4. Could it simply be a problem with FB4? I'm tempted to revert back to CS3 and simply build my script using Flash, but I would really like to be using new software instead of old.

    Now I am getting the error code of 16 and to reinstall the product.  I reinstalled FB 4.5 and it still won't launch.  I do not know what to do and cannot get through to anyone in support and I'm not given the option to chat to anyone at Adobe through the support portal.
    Can anyone help me so that Flash Builder will launch again?

  • Can I use conditional build tags in CSS files?

    I am using RoboHelp X5.0.2 and building CHM files.
    I use conditional build tags to output different Help files
    for the different products we have that all have similarities.
    In the past I have setup the CSS file to show headers, links
    etc in the color scheme we use to keep the look and feel of our
    branding. One of the new products uses a different branding color
    scheme.
    I was wondering if there is a way I can use conditional build
    tags in the CSS file so that when I build one type of help it uses
    header in one color and when I build another help it uses a
    different header color. Does anyone know how to do this? If it is
    not possible in my current version, is it possible in the latest
    version of Robohelp?

    [WORKAROUND ALERT IN X502]
    For .chm output, you could:
    1. In the Topics pane, select all the topics (click on one
    topic and press Ctrl+A).
    2. Right click in the highlighted area and select Properties.
    3. In the Appearance tab, select the different style sheet.
    4. Click Save.
    5. Generate the .chm file.
    6. (optional) Repeat steps 1-4 to revert to previous style
    sheet setting.
    Good luck,
    Leon

  • "build" section in PKGBUILD files.

    I've noticed that the build section for some programs are different from others, I assume this means that without that proper distinctive build part, the file won't compile and a package won't be made.  So my question is how do you tell if a program needs an irregular build section?  For instance,
    # $Id: PKGBUILD,v 1.80 2005/07/10 19:53:19 jgc Exp $
    # Contributor: Lucien Immink <[email protected]>
    # Maintainer: dorphell <[email protected]>
    pkgname=gaim
    pkgver=1.4.0
    pkgrel=1
    pkgdesc="A GTK+-based messaging client"
    url="http://gaim.sourceforge.net"
    depends=('startup-notification' 'libao' 'gnutls>=1.2.0' 'tk' 'gtkspell')
    source=(http://dl.sourceforge.net/sourceforge/gaim/gaim-$pkgver.tar.bz2)
    md5sums=('d7717cb771e556012ecd5b7f3bdb02ba')
    build() {
    cd $startdir/src/$pkgname-$pkgver
    ./configure --prefix=/usr --enable-gtkspell --enable-gnutls=yes --enable-nss=no --disable-gevolution
    make || return 1
    make DESTDIR=$startdir/pkg install
    rm $startdir/pkg/usr/lib/perl5/*/$CARCH-linux-thread-multi/perllocal.pod
    mv $startdir/pkg/usr/lib/perl5/?.?.? $startdir/pkg/usr/lib/perl5/current
    would be an irregular entry
    I know there's some kind of regular build entry, but I can't find it.
    reid

    hotsock wrote:I know there's some kind of regular build entry, but I can't find it.
    If you run
    # abs
    as root, you'll get a template PKGBUILD:
    /var/abs/PKGBUILD.proto
    It has what could be called a regular build entry.

Maybe you are looking for

  • Any idea to develop simple project in oracle forms

    Hi every one I have just learned Oracle forms now I want to make a project in oracle forms i am using forms 10g Any help what can i make or any links where can i get idea to create a project which can look like as a live project

  • Component and Application Configuration not working

    Dear Friends,   I want to disable the reject button in HCM Processes and Forms Webdynpro component HRASR00_PROCESS_EXECUTE and in application asr_process_execute only for some specific roles in Portal. So I tried to use the component configuration fo

  • Folio producer tools

    I have a standard acrobat accout and have been adding to a single folio which is now at a fair size and I could do with re-ordering and changing some scrolling/ swiping actions. But am unable to change the folio at dp.acrobat because my account is no

  • Dreamweaver CS 6.  CSS Styles Greyed Out

    When I view the ALL drop down menu in the CSS Styles panel I do not see any casading CSS styles.  I have just brought a new defined CCS layout in and can view the Current drop down menu but when I got to the All style option it appears grayed out and

  • OLE Automation with Excel

    Hi All, Does anyone know of any reference/help/material on how to use OLE automation to download and format data from ABAP to Excel. I need to know what the available methods and properties are so I could format the data the way I want. Any help will