Building a CASA or bpel project

In Java CAPS 5.1.X(classic repository), building resulted creation of a '.ear' file but is it the same when we build a casa or a bpel project in Java CAPS 6 (JBI module)? If yes, then where (folder location) is the .ear generated? If no, then what file is generated eg. - .jar or .zip or else?

Thanks a lot. It helped me a lot. It seems this is the problem with the BPEL Console. I tried to create another BPEL Project to invoke the other service/operations. It worked perfectly fine. I had even tested with SoapUI. It worked fine. Thanks for the right pointer.

Similar Messages

Can not see Oracle BPEL Project option in Eclipse

Hi,
I have followed the Test Drive document to install the Oracle BPEL Process Manager 2.0 e.g:
1. Installed Eclipse 3.0 GA (eclipse30GA.zip)
2. Installed BPEL Process Manager 2.0RC9 (orabpel_2.0rc9_OC4J_win32.exe)
3. Installed BPEL Designer Plugin for Eclipse (bpelz_0.9.1_win32.exe)
When I open Eclipse to build a new Oracle BPEL Project I don't get the option to do that. It seems that the plugin isn't loaded or so ?
I am very sure that I answered the install questions correctly (tried multiple times).
Any ideas on what could be wrong ?
Thanks
Andy

Further information - it now seems that the missing 'bat' file is due to the order of installation of server and designer. However, the 'bpelz.bat' file looks for the 'obsetenv.bat' in the wrong directory. Should be 'call ..\..\bin\obsetenv.bat' (on my install at least). Eclipse 3.0 also has a bug I now discover that does not load plugins correctly. Delete the 'configuration' directory, restart and the plugin becomes available

How to run JDev's generated build.xml file(BPEL project) from command win.?

hi all
When I execute build.xml file of simple BPEL project from JDev it runs properly. But when I try to execute it from normal command window It gives me an following error.
...........droping jar file xyz.jar from path as i doesn't exists.
While all jar files are exist there.But Ant drops it from Classpath variable.
So JDev sets some environment before executing such build.xml file.Like {oracle.home} variable u need to set while runnig build.xml from command window.
Any suggestions...???
/mishit

you cant run a .war file from command prompt
.war files should be executed in a server
how to execute a single servlet class
do you mean to run the servlet or compile the servlet?
any way you need a server and if you are a beginner Apache tocat will be the best server to start with you can down load it from
http://tomcat.apache.org/

Error in deploying BPEL project from Jdeveloper

Hi all,
I am using Jdeveloper 10.1.3.4.0.
For the first time BPEL project deployed successfully, but when i am trying to deploy second time it's giving the below error.
BUILD FAILED
D:\jdevstudio10134\jdev\mywork\AIA_POC_Application\AIABPELProcess1\build.xml:77: A problem occured while connecting to server "172.16.122.234" using port "80": bpel_AIABPELProcess1_1.0.jar failed to deploy. Exception message is: Error deploying BPEL suitcase.
An error occurred while attempting to deploy the BPEL suitcase file "D:\SOA10.1.3.5\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\bpel_10514847.tmp"; the exception reported is: archive cannot rename D:\SOA10.1.3.5\10.1.3.1\OracleAS_1\bpel\domains\default\tmp\.bpel_AIABPELProcess1_1.0_a5bf50a13f9cba731b8f263f2431a17c.tmp
pls help me.
thanks
mani

Can you check these things :
1) is this issue with only this project ? Try deploying some other project
2) try deploying this project using ant (change values in build.properties and right click on project -> run ant or something like that, use default deploy target)
3) try undeploying project from server and then redeploying it again
also, why is it connecting to port 80? normally it is 8888 or 7777 right?
regards,
Ketan

Flash Builder no longer compiles a project

After my last edit - no syntax errors - of a given project, Flash Builder no longer builds my project.
Restarted Flash Builder. Created a new project and copied all sources. Nothing helps. It just doesn't create the binary.
I see two problem reports.
Most of the time this one:
    An internal build error happened. See the error log for further details.
Then, sometimes, this one appears:
   Classes aren't allowed to be defined inside other classes.
The project is syntactically free of errors.
As soon as I remove the main component from the App.mxml, the build finishes orderly and the app starts up. In this case - as expected - with a blank window.
Does a workaround solution exist? Does certain size restrictions make the build fail?
OS:
   Mac OS X Lion.
Bug-Report:
   http://bugs.adobe.com/jira/browse/FB-32216

Unbelieveable. After 2 day, I found the problem right now:
I wrote
private var baseNiceText = String = '';
instead of
private var baseNiceText : String = '';
After I changed the source and recompiled, the app builds.
Anyway, it's a problem inside of compiler.

ORABPEL-09903 when deploying BPEL project

Hi,
When I am deploy a BPEL project, below error is reported:
C:\jdevstudio10133\jdev\AppsCreateOrder\AppsCreateOrder\build.xml:79: A problem occured while connecting to server "col-hydra2" using port "7777":
bpel_AppsCreateOrder_1.0.jar failed to deploy. Exception message is:
ORABPEL-09903
Could not initialize activation agent.
Any help is greatly appreciated in helping resolve this issue.
Regards,
Balu

Hi everyone,
I have posted this under BPEL forum also where solution for this ORABPEL error is provided.
URL:
Urgent help needed for ORABPEL-09903
But looking at the solution I am not understanding one thing.
If we remove activationAgents from bpel.xml, then how our BPEL process gets initialized.
Removing that xml fragment from the bpel.xml file will essentially render the adapter unserviceable because you have removed the activation agent linked with the adapter. Thus, despite the process getting deployed successfully, the adapter will not work and you will get a run-time error.
Any opinions on this?
Cheers,
Abhi...

Flash Builder doesn't rebuild the project everytime I modify the code

Hi,
Flash Builder doesn't rebuild the project everytime I modify the code.
I find myself chasing ghosts when trying to debug my project. Flash Builder 4.0 doesn't rebuild my project after every change I make.
The "Project - Build Automatically" is of course selected. To make sure the problem is real I ran "Project - Build All" several times. Nothing helped.
For example, I am using a boolean constant to select different code in an if block. Even if I change the value of the boolean, When I debug the code, I see that the constant's value doesn't change. Only If I log out login again, FB will rebuild my code.
This happens too many times and it is very confusing to debug, when you don't know if the result now is with or without your changes.
It also affects the following:
- breakpoints that are set or disabled are not taken into account and the debugger will skip them even if they are set or stop on them if they are disabled.
- the debugger stops the debug on empty lines, if those lines previously contained code.
- When I comment out the declaration of variables. Eclipse doesn't recognize them and doesn't show any hint on them when you hold the CTRL key and hover over, but while in debug mode, when you hover over the variable instance, its shows a value for it.
Thanks for your help.
Bye,
RaamEE-IL

The problem is with the SDK settings selected for the Compiler.
Try going to 'Project' > 'Properties' > 'ActionScript Compiler'.
Now, in the 'Flex SDK section', try changing the SDK. Click on 'Apply'.
This will force FB to rebuild all settings for the project.
You can try again. FB should now have started compiling with latest code changes again.
Please Note: This is not a permanent fix though!
In case the problem re-occurs, you'll need to again perform the steps mentioned above to get FB back on track.

Deploy bpel project using ant

Hi,
I am try to create the build.xml to deploy the bpel project with ant.
The build.xml and build.properties work fine with Jdev now, but when I use the command line 'ant deploy' to test it, it got following error:
Buildfile: build.xml
[echo]
[echo] oracle.home = "D:/jdevstudio10134"
[echo] bpel.home = "D:/jdevstudio10134/integration/bpel"
[echo]
[java] Java Result: 1
[taskdef] Could not load definitions from resource com/collaxa/cube/ant/orabpe
l-antlib.xml. It could not be found.
pre-build:
validateTask:
[echo]
[echo] --------------------------------------------------------------
[echo] | Validating workflow
[echo] --------------------------------------------------------------
[echo]
BUILD FAILED
D:\Projects\NetApp\SVN\Integration\Item\SourceCode\UpdateItemEbizReqABCSImpl\bui
ld.xml:72: Could not create task or type of type: validateTask.
Ant could not find the task or a class this task relies upon.
This is common and has a number of causes; the usual
solutions are to read the manual pages then download and
install needed JAR files, or fix the build file:
- You have misspelt 'validateTask'.
Fix: check your spelling.
- The task needs an external JAR file to execute
and this is not found at the right place in the classpath.
Fix: check the documentation for dependencies.
Fix: declare the task.
- The task is an Ant optional task and the JAR file and/or libraries
implementing the functionality were not found at the time you
yourself built your installation of Ant from the Ant sources.
Fix: Look in the ANT_HOME/lib for the 'ant-' JAR corresponding to the
task and make sure it contains more than merely a META-INF/MANIFEST.MF.
If all it contains is the manifest, then rebuild Ant with the needed
libraries present in ${ant.home}/lib/optional/ , or alternatively,
download a pre-built release version from apache.org
- The build file was written for a later version of Ant
Fix: upgrade to at least the latest release version of Ant
- The task is not an Ant core or optional task
and needs to be declared using <taskdef>.
- You are attempting to use a task defined using
<presetdef> or <macrodef> but have spelt wrong or not
defined it at the point of use
Remember that for JAR files to be visible to Ant tasks implemented
in ANT_HOME/lib, the files must be in the same directory or on the
classpath
Please neither file bug reports on this problem, nor email the
Ant mailing lists, until all of these causes have been explored,
as this is not an Ant bug.
Total time: 0 seconds.
Any hint on it?
Thanks!

you need to set environment variables (at least $ORACLE_HOME and $JAVA_HOME), for ant tasks to work from command line.
If you are trying this on the SOA Suite server, open a devprompt.sh from $ORACLE_HOME/bpel/bin, and it would work from there.
Regards,
Shanmu.
http://www.prshanmu.com/articles/

New BPEL project with CLI?

Hi,
for building java webservices i can use the Wizard from JDev or as CLI the wsa.jar.
Is there a way to build new BPEL projects via command line?
Thanks

Hi again,
It seems that if you delete the configuration folder in the installation folder (C:\eclipse) and restart the Designer, the option becomes available...
Regards,
Marinel

Error while creating a new BPEL project

Hello!
When I create a new BPEL project, I get this message: "Object expected", and on the footnotes, the following message is printed: "event://LogErrorEvent?bpelz.html trapped at 62: object expected"...
Does anybody knows what is happening?
Thanks in advance,
Pedro Catoira

hello Pedro,
Try to see this link in the forum:
BPEL Designer Process problem
It seem the same problem but I'm not sure...
byebye
Andrea

Exception While importing or unable to browse the xsd to a BPEL Project

Dear All..,
I am having an issue wjile importing the schema to a BPEL project. It says that unable to load the schema.
Even When I try to choose the schema through edit variable option, and to mention the URI of schema location, on click of the search button, the Jdev hangs for ever. Why this scenario is happening.
I replaced the JDEV copy i have, still its shows the same issue. Is it a problem from the OS. The Jdev Version is 1.3.4.1
Please update...
Many Thanks in advance...
Edited by: santark on May 7, 2009 12:38 PM

Thank you for your immediate resposne...
Please find the xsd below:
<?xml version="1.0" encoding="Windows-1252"?>
<xsd:schema xmlns="http://xmlns.hdnl.com/EnterpriseObject/Core/DiaryCancellation"
elementFormDefault="qualified"
targetNamespace="http://xmlns.hdnl.com/EnterpriseObject/Core/DiaryCancellation"
xmlns:types="http://xmlns.hdnl.com/EnterpriseObject/Core/Types"
xmlns:comm="http://xmlns.hdnl.com/EnterpriseObject/Core/CommonTypes"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:import schemaLocation="DataTypes.xsd"
namespace="http://xmlns.hdnl.com/EnterpriseObject/Core/CommonTypes"/>
<xsd:import schemaLocation="CommonTypes.xsd"
namespace="http://xmlns.hdnl.com/EnterpriseObject/Core/Types"/>
<xsd:complexType name="DiaryCancellationRequestType">
<xsd:sequence>
<xsd:element name="BookingId" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="types:StringType">
<xsd:maxLength value="32"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="UserId" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="types:StringType">
<xsd:maxLength value="32"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="DiaryCancellationResponseType">
<xsd:sequence>
<xsd:element name="BookingId" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="types:StringType">
<xsd:maxLength value="32"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element minOccurs="0" name="ErrorInfo" type="comm:ErrorType"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="DiaryCancellationRequest" type="DiaryCancellationRequestType"/>
<xsd:element name="DiaryCancellationResponse"
type="DiaryCancellationResponseType"/>
</xsd:schema>
I have the DataTypes.xsd and CommonTypes.xsd are there in the same location
Please update...

How to create a .jar file for the BPEL project

hi all,
how can i create a .jar file for my BPEL project, i am trying to deploy the project but getting an error :
"Error: [Error ORABPEL-10902]: compilation failed [Description]: in "C:\OraBPELPM\integration\jdev\jdev\mywork\Workspace_BPELDemo\BPEL_Report\BPEL_Report.bpel", XML parsing failed because "". [Potential fix]: n/a. "
and when doubel cliking on this error Jdev take me to the beginning of the ".bpel" file.
I 'm really stuck in here i am not able to deploy the process!
Thanks,
Rana

Rana:
If you haven't already, I would post this question in the BPEL forum. I would expect a much better turnaround there.
Johnny Lee

Unable to call a web service from BPEL Project

I am running my BPEL PM on Windows XP SP3. The platform is weblogic 9.2, SOA 10.1.3.1.
I created a simple BPEL project to call a web service and when I run the project from BPELConsole I getting the following error:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. )
I am able to call this web service from soapUI client.
Any help or hint is appreciated.
Thanks

I have had this issue before when calling a .NET service, it was firewall related. I didn't actually make the fix so I can't tell you exactly how it was fixed on the server. I hope this info makes sense as this this the info I got from the IT boys
I’ve install this tool on your computer:
http://www.microsoft.com/downloads/details.aspx?FamilyID=05C2C932-B15A-4990-B525-66380743DA89&displaylang=en
which does that:
Firewall Client for ISA Server can be optionally installed on client computers protected by Microsoft ISA Server. Firewall Client for ISA Server provides enhanced security, application support, and access control for client computers. It provides authentication for Winsock applications that use TCP and UDP, supports complex secondary protocols, and supplies user and application information to the ISA Server logs.
When a client computer running Firewall Client for ISA Server makes a request, the destination is evaluated by the Firewall Client software, and external requests are directed to the ISA Server computer for handling. No specific routing infrastructure is required. Firewall Client sends user information transparently with each request, enabling you to create a firewall policy on the ISA Server computer with rules that use the authentication credentials presented by the client. ISA Server allows you to configure automatic discovery for Firewall client computers, using a WPAD entry in DNS or DHCP to obtain correct Web proxy settings for clients, depending on their location.
and I’ve added a exception in IE to the tools-lan settings-advanced-exceptions to be creditworks.* Did this by modifying the GPO that applies to your account, so all the users in National Office should have that exception.
hope you can use this.
cheers
James

Error while creating an asynchronous BPEL project

In BPEL Project Creation Wizard-> while selecting the Input and Output Schema element, Instead of getting the complete namespace in "Type",
I get "{}PODesc".
Why is it not picking the complete namespace???

User,
The people on the [url http://forums.oracle.com/forums/forum.jspa?forumID=320]SOA Suite Forum or [url http://forums.oracle.com/forums/forum.jspa?forumID=212]BPEL Forum can probably better help (a copy-and-paste from another reply just an hour or so ago)
John

How to copy test cases from one project to another?

Currently we have several projects withing the oracle test manager suite with test cases in each of them. I need to be able to copy some of the test cases to other projects or atleast select them to run under a new project instead of retyping them everytime. Is there a way to do this? I see that I can copy within a project and paste but have not be able to find way to do it outside of a project. Maybe there is a way to export and then import? Any ideas would be helpful?
Thanks

Hi
You can always export a test Summary table Report in XLS and import it in the new project, however that will not give you results or test steps but at least is a start.
Also there is something called Data Links have a look at the help file you may be able to use that when creating test cases, you could create the test case in CSV first and then upload it to multiple projects using the data link.
Hope this helps
Alex

Building a CASA or bpel project

Similar Messages

Maybe you are looking for