Flash Builder doesn't rebuild the project everytime I modify the code

Hi,
Flash Builder doesn't rebuild the project everytime I modify the code.
I find myself chasing ghosts when trying to debug my project. Flash Builder 4.0 doesn't rebuild my project after every change I make.
The "Project - Build Automatically" is of course selected. To make sure the problem is real I ran "Project - Build All" several times. Nothing helped.
For example, I am using a boolean constant to select different code in an if block. Even if I change the value of the boolean, When I debug the code, I see that the constant's value doesn't change. Only If I log out login again, FB will rebuild my code.
This happens too many times and it is very confusing to debug, when you don't know if the result now is with or without your changes.
It also affects the following:
- breakpoints that are set or disabled are not taken into account and the debugger will skip them even if they are set or stop on them if they are disabled.
- the debugger stops the debug on empty lines, if those lines previously contained code.
- When I comment out the declaration of variables. Eclipse doesn't recognize them and doesn't show any hint on them when you hold the CTRL key and hover over, but while in debug mode, when you hover over the variable instance, its shows a value for it.
Thanks for your help.
Bye,
RaamEE-IL

The problem is with the SDK settings selected for the Compiler.
Try going to 'Project' > 'Properties' > 'ActionScript Compiler'.
Now, in the 'Flex SDK section', try changing the SDK. Click on 'Apply'.
This will force FB to rebuild all settings for the project.
You can try again. FB should now have started compiling with latest code changes again.
Please Note: This is not a permanent fix though!
In case the problem re-occurs, you'll need to again perform the steps mentioned above to get FB back on track.

Similar Messages

Flash Builder doesn't recognize instances from Flash CS.

I've currently started working with Flash CS 5.5 and I use Flash Builder 4.6 to work with AS3 files.
A problem arrised when I try to access an instance of a symbol placed on the stage or inside of another symbol.
Flash Builder doesn't recognize the existance of said instance and shows this as an error. (The code compiles fine though.)
Is there any way of bringing instances placed using the Flash CS Editor to Flash Builder's attention?
(I've also noticed that even the code editor of Flash CS doesn't recognize these instances.)
Thanks in advance.

After I hit run the URL that is shown on Firefox is the last page that I was on, so in this case, 'this' pages url; therefore, has nothing to do with what I'm trying to run. So in this case it would be "http://forums.adobe.com/post!reply.jspa?message=3625965"
Now as for which version:
Flash Player version: MAC 10,2,153,1 debugger version
Mac OS: 10.6.7
Update: Alright, it seems to have been some Firefox bug. I upgraded to Firefox 4.x on a haunch and somehow it must of reset whatever that was causing the problem and it now works as nornal. Thanks for the help though, appreciated.

Flash Builder no longer compiles a project

After my last edit - no syntax errors - of a given project, Flash Builder no longer builds my project.
Restarted Flash Builder. Created a new project and copied all sources. Nothing helps. It just doesn't create the binary.
I see two problem reports.
Most of the time this one:
    An internal build error happened. See the error log for further details.
Then, sometimes, this one appears:
   Classes aren't allowed to be defined inside other classes.
The project is syntactically free of errors.
As soon as I remove the main component from the App.mxml, the build finishes orderly and the app starts up. In this case - as expected - with a blank window.
Does a workaround solution exist? Does certain size restrictions make the build fail?
OS:
   Mac OS X Lion.
Bug-Report:
   http://bugs.adobe.com/jira/browse/FB-32216

Unbelieveable. After 2 day, I found the problem right now:
I wrote
private var baseNiceText = String = '';
instead of
private var baseNiceText : String = '';
After I changed the source and recompiled, the app builds.
Anyway, it's a problem inside of compiler.

I uninstalled Flash Builder 4.7 using the uninstall app. I'd like to re-install the app, but Creative Cloud says it's up-to-date, even though it does not exist anymore on my computer. How can I re-dowload it?

I uninstalled Flash Builder 4.7 using the uninstall app. I'd like to re-install the app, but Creative Cloud says it's up-to-date, even though it does not exist anymore on my computer. How can I re-dowload it?

CC desktop lists applications as "Up to Date" when not installed
http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5

I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5
Please help

Kind of. I never actually solved the bug, but I did make it past the install.
Upon running Adobe Flash Builder 4.7 Plug-in Installer it appeared to crash and only load a blank screen with a single unclickable button. It wasn't actually "hanging", and would react when I clicked on the program menu and moused over "Services". This would allow my clicks and keystrokes to register with the program, but only after I mouse over the "Services" menu item. For example, you need to click "okay", then mouse over "Services". When you want to enter text you need to click in the text box, and mouse over "Services". Then you need to type the text you want, and mouse over "Services" to see the text appear. It's a PITA, but you can get through the install by doing this.
After installing the FB plug-in starting eclipse with editors open appeared to cause errors. If this happens, this is because it seems that FB attempts to load when eclipse starts up. Close all editors and restart eclipse. The Welcome page for FB may pop open up. At the bottom there is a check box that will keep that form loading - check it. If the page does not open when eclipse starts, then open up an MXML file. The Welcome page should load, and you can check the box.
I hope this helps you move forward. Also, if you find an actual solution please let me know.

My Nokia N95 doesn't show the codes like *#0000# a...

My Nokia N95 doesn't show the codes like *#0000# and *#06# anymore. Actually all the codes , even those for restoring to the factory settings don't work anymore. Now when i type them in , the phone only bips once and that's all. They worked before , but i don't know exactly what may have caused this error. Maybe some application i installed on it or what else!? Please help. Thank you.

>
Thanks to john3136 . That�s what i neededHELLOOOOO! Where's john3136's Dukes then????

Random errors on Flash Builder 4.5.1 mobile project: FXG elements

I'm kind of frustrated because Flash Builder is starting to report random errors on some mxml components that include FXGs. It's reporting the following errors:
1. 'MyFXG' declaration must be contained within the <Declarations> tag, since it is not assignable to the default
property's element type 'mx.core.IVisualElement'.
2. In initializer for 'mxmlContent', type es.domain.application.skin.assets.fxg.MyFXG is not assignable to target Array
element type mx.core.IVisualElement.
Code example:
<s:Group height="100%"
left="10" right="10" top="40" bottom="10">
<fxg:MyFXG width="100%" height="{content.height+20}"/>
</s:Group>
The curious thing (and frustrated one): these fxgs are included on others components and are working fine. There's no problem with the FXG themselves. If I comment all lines where I get an error, my project starts to compile fine (remember that I got included those very same fxgs in other components in the same project).
Even more curious: if I uncomment those lines my project continues to compile fine! But If I make a clean, It starts to complain again on the very same lines and fxgs.
It is driving me crazy!
Anyone could give me a clue? Has anybody experienced something like this?
Thanks in advance.

Well, finally I've managed to solve the issue:
I've deleted one of the mxml components that contained false fxg errors.
I've created another mxml component with a different name.
I've copied&pasted the content of the first mxml into the new one.
et voila, everything has started to compile again, even if I clean the project.
Really weird and strange issue :S

Flash builder doesn't load on flash player 11,only version 13

Hi everyone
I developed a swf player on flex builder 4.5, over flex sdk 4.6, using the minimum version required by the sdk(11.1)
But for some reason, the script code only works fine on flash player 13.
What am i missing?
On the flash player 11 this is written by swfobject.js
<object id="CorePlayer" name="CorePlayer" width="0" height="0" type="application/x-shockwave-flash" data="assets/CorePlayer.swf"><param name="allowscriptaccess" value="*"><param name="allowfullscreen" value="true"><param name="wmode" value="transparent"><param name="flashvars" value="endpoint=&hash="></object>
And this is the javascript code using swfobject.js way:
var swfVersionStr = "11.1.0";
                var xiSwfUrlStr = "playerProductInstall.swf";
                var flashvars = {
                    endpoint: "",
                    hash: ""
                var params = {
                    allowscriptaccess: "*",
                    allowfullscreen: true,
                    wmode: 'transparent'
                var attributes = {
                    id: "CorePlayer",
                    name: "CorePlayer"
                swfobject.embedSWF("assets/CorePlayer.swf", "flashContent", "0%", "0%", swfVersionStr, xiSwfUrlStr, flashvars, params, attributes);
                swfobject.createCSS("#flashContent");
But doesn't load corePlayer.swf on the networks resources from chrome.
Any ideia about this issue please thanks for your attention!!
Also some others tecnichals settings

From: Bill Boggs
Sent: 01/04/2014 1:13 PM
To: [email protected]
Subject: Re: Flash player doesn't load on PBS sites
Hey Mike,
Those folders do exist. I did a clean install, checked to make sure those folders were there, but still get the same results with video on PBS sites. Seems to work everywhere else though. When I right click on the player space, besides the flash player settings and “about” links, there is also an “about JW player” link, if that means anything.
Bill

Flash Builder doesn't launch my app nor debugger

Hi, very odd.
Flash Builder all of a sudden stopped launching my app or the debugger.
When I press run Flash Builder switches to my browser (Firefox 3.x) then nothing.
Doesn't open a new tab, no error messages, nothing.
Exact same thing when I try to debug, except I get an error saying it failed to connect, session timed out.
It also says to make sure it was compiled with debugger on (huh?) and that I'm running a debugger version of Flash which I am.
Not sure what to do now. There is no real error message, and no odd behavior other than it just not doing anything.
Any idea?

After I hit run the URL that is shown on Firefox is the last page that I was on, so in this case, 'this' pages url; therefore, has nothing to do with what I'm trying to run. So in this case it would be "http://forums.adobe.com/post!reply.jspa?message=3625965"
Now as for which version:
Flash Player version: MAC 10,2,153,1 debugger version
Mac OS: 10.6.7
Update: Alright, it seems to have been some Firefox bug. I upgraded to Firefox 4.x on a haunch and somehow it must of reset whatever that was causing the problem and it now works as nornal. Thanks for the help though, appreciated.

Eclipse with flash builder 4 plugin consume the whole memory after several builds

Hi,
we have installed eclipse flash builder 4 plugin on eclipse 3.5.2 on Mac OS 10.6.
We experience problem with memory leak using flash builder plugin 4.
When we build flash project several times, then we see that eclipse consume more and more in time and at the end it looks like that eclipse consume all available memory. When there is no free memory, then system start to swap and we need to restart, because everything is going to be slow when swaping starts.
Any suggestions how to solve this problem?
I suppose that other people also have this problem. I will be realy happy if someone share his experience to fix this.
We uses java 1.5.
Thanks in advanced!

Ok, problem solved.
First I uninstalled the flash builder plugin, and eclipse galileo was still not starting.
Then I uninstalled java (both jre/jdk, v6.20).
Crossing my fingers, I reinstalled jdk and then jre (latest downloaded); and eclipse ran again (pheeeew!).
Finally, I installed flash builder 4 plugin again, it works too (!), and aptana works, ... all is working back again, fine!

Native Process running from Flash Builder but not from the installed exe

I have created an AIR application to launch a native process. The application works fine when tested in Flash Builder but doesn't runs when I create and AIR installer and run the installed exe. Any idea what might be wrong?

Have you created a native installer instead of just an AIR file.
-ted

Creating Portfolios with Flash Builder 4.6 and the 4.1a SDK

I've been following the instructions and tutorials on the creation of Navigators for Acrobat with Flash Builder but it seems to be missing a few steps along the way.
http://blogs.adobe.com/pdfdevjunkie/ax-portfoliosdk_intro/ax-portfoliosdk1
Symptoms:
- When I run the navigator (run as navigator) I get an error "Error: Error #2067: The ExternalInterface is not available in this container. ExternalInterface requires Internet Explorer ActiveX, Firefox, Mozilla 1.7.5 and greater, or other browsers that support NPRuntime."
- Once dismissed the "for the best experience" message is displayed with a prompt to download the latest Reader.
Correct SDK's are being used.

Solved it. Just added the following in the <InfoAdditions> tag for iPhone in my app descriptor XML file:
<key>UIRequiredDeviceCapabilities</key>
<array>
<string>wifi</string>
<string>armv6</string>
<string>armv7</string>
</array>

Flash builder doesn't start !

Hi,
I have a cloud version of flash builder and resently I try to start like usual and nothing append !
I try to reinstall it burt no changes !
any help ?
sorry the solution is here http://forums.adobe.com/message/5202497#5202497

Ok, problem solved.
First I uninstalled the flash builder plugin, and eclipse galileo was still not starting.
Then I uninstalled java (both jre/jdk, v6.20).
Crossing my fingers, I reinstalled jdk and then jre (latest downloaded); and eclipse ran again (pheeeew!).
Finally, I installed flash builder 4 plugin again, it works too (!), and aptana works, ... all is working back again, fine!

How to sign with Flash Builder created APK for the Goole Play Store?

Hello,
i have big problems signing the apk for the GooglePlayStore..
I tried this from the android dev page
jarsigner -verbose -sigalg MD5withRSA -digestalg SHA1 -keystore my-release-key.keystore
my_application.apk alias_name
but i am getting this error:
jarsigner: unable to sign jar: java.util.zip.
sed size (expected 1504 but got 1513 bytes)
I created a p12 with Flash Builder and thought thats all i need but the playstore says its unsinged so how to sign it corretcly?
Please help

i works with this error, strange

Flash Builder doesn't see my ios8 devices

My dev environment was working fine a couple months back, hadn't made any changes and came back to work on a mobile app. Now Flash builder cannot see my ios 8 devices. I think the problem is ios8 and related to provisioning profiles not being installed. Which of course I can't verify because apple has conveniently removed the ability to see the installed profiles... I have regenerated the provisioning profile and know that the device I am attempting to use is listed. Honestly this should have even been needed since it was working fine before.
Also I can manually install the app on the device using itunes, however the device will not open, again implying that the profile is missing which is causing the issue.
If anyone has any suggestions please let me know. This has been very frustrating-- apple always seems to be making things more difficult for those who don't follow their dotted line.
Also updated my sdk to 4.14.1.
Thank-you,
Jonathan

After I hit run the URL that is shown on Firefox is the last page that I was on, so in this case, 'this' pages url; therefore, has nothing to do with what I'm trying to run. So in this case it would be "http://forums.adobe.com/post!reply.jspa?message=3625965"
Now as for which version:
Flash Player version: MAC 10,2,153,1 debugger version
Mac OS: 10.6.7
Update: Alright, it seems to have been some Firefox bug. I upgraded to Firefox 4.x on a haunch and somehow it must of reset whatever that was causing the problem and it now works as nornal. Thanks for the help though, appreciated.

Flash Builder doesn't rebuild the project everytime I modify the code

Similar Messages

Maybe you are looking for