Building coherence rpm fails because of Unix flat file permission.

Hi - New to coherence but have large implementation ahead. Trying to rpm it. Refer bug - https://bugzilla.redhat.com/show_bug.cgi?id=250295.
lot of files in coherence.jar have flat unix file permission which makes building rpm fail. Solution is to unjar.. change permission and then do rpmbuild, but think this should be fixed on oracle side as well.
BTW - do we have coherence.rpm ? i hope am not re-inventing wheel :).
please point me if its available.
Thanks.
-R.
Central directory entry #5:
coherence-cache-config.xml
offset of local header from start of archive: 16968 (00004248h) bytes
file system or operating system of origin: Unix
version of encoding software: 2.0
minimum file system compatibility required: MS-DOS, OS/2 or NT FAT
minimum software version required to extract: 1.0
compression method: deflated
compression sub-type (deflation): normal
file security status: not encrypted
extended local header: no
file last modified on (DOS date/time): 2010 Jan 14 13:06:08
32-bit CRC value (hex): a472a7f0
compressed size: 1745 bytes
uncompressed size: 8129 bytes
length of filename: 26 characters
length of extra field: 0 bytes
length of file comment: 0 characters
disk number on which file begins: disk 1
apparent file type: binary
Unix file attributes (000000 octal): ?---------
MS-DOS file attributes (01 hex): read-only
There is no file comment.

Hi
As suggestion test the file path (specially the system separator character). If the cause is a security issue the problem must appear in both systems (i suposse that the process can write files in both systems, so you can check if true).
Hope this helps

Similar Messages

Job scheduling failed because the user has no permission to access this rep

Hi. I've OBIP 10.1.3.4.1.
When I launch a print with the scheduler I see this error:
oracle.apps.xdo.servlet.scheduler.ProcessingException: Job scheduling failed because the user has no permission to access this report. [REPORT_URL]=[folderreport/report/report.xdo], [USERNAME]=[administrator]
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1140)
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:295)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:100)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
In this env. I've a LDAP Security Model and all the report and all the users work.

Please check whether you have assigned below responsibility to the user trying to schedule report.
XMLP_SCHEDULER

Wind Vista SP2. iTunes 10.6.3.25. I'm trying to Consildate my Music Library on this PC, and get the error: "Copying files failed, because you don't have permission to change your iTunes Media folder or a folder within it." My admin user has Full Control

Any suggestions would be greatly appreciated!

I did what you suggested on all three folders: The main Music folder on the Mac hard disk, on the iTunes folder on the external 160GB Hard drive which contains the current media content and on the new 2TB hard disk on which I created a new media folder. I selected permission for myself which were already read+write and chose the apply to enclosed items on all three folders. I then changed the permission for others to read+write and applied to enclose items also an all three folders.
But it didn't solve anything.
Here's what happens: I choose the new directory in iTunes preferences (the media folder on the 2TB disk) I then go to File > Library > Organize Library and then choose Consolidate files. A window pops up and says copying "filename" with a progression bar underneath but the filename never changes. Instead the beachball appears when the mouse pointer hoovers over iTunes. Upon pressing the iTunes icon in the Dock it says that iTunes is not responding. At this point there's 2 different ways:
A - If I then force quit iTunes the iTunes window disappears but the application does not close. When I want to eject the 2TB disk it says it's being used by another application. Only when I cut the power to the 2TB disk does iTunes fully close. A window then pops up and says that the drive was not put away properly etc.
B - if I cut the power to the drive without force quitting iTunes, a window appears with the said: "Copying failed because you don't have permissions to change iTunes media folders etc." iTunes remains open and fully functional.

Unix Flat File: Remove header and trailer and put in another file.

Hi,
I have Source Flat File placed on Unix Box with header and trailer.
I want to remove Header and Trailer and put in some other file and Data in another file.
I tried following command in unix its working.But not getting Header and Trailer in another file.
sed '1d;$d' input_source.txt > output_data.txt
also How will i use OS command for it in ODI.
Guide me.
Thanks
Ashwini

Hi Ashwini,
You can run OS commands in a package using an ODI Tool: OdiOSCommand.
It is also possible to execute OS commands in an ODI procedure using the Operating System or Jython technologies.
There should be some articles about this on metalink (http://metalink.oracle.com).
Thanks,
Julien

Retry of unsuccessful installation of Photoshop Elements fails because it cannot find files which it believes to be present in order to remove them first.

W7 CD of both Photoshop Element and Premiere Elements 12: Could get the Organizer of Photoshop installed and working but could not install the editor completely; Premiere Elements seemed to install OK but I was at the time only interested in using Photoshop so did not verify this. Read instructions in Troubleshoot Installation, and for convenience dragged the CD files to the C Drive. I then re-ran the installation process, which initially tries to uninstall the existing installation but this failed as it stated that some files were in use. I ended up uninstalling Premiere Elements because of the shared components but this made no difference. I used Windows Remove Programs tool but it stated that some files were in use so could not be removed. I used autoruns to search for and prevent from launching at Startup, all Adobe s/w, then searched for and tried to remove all Photoshop files but got the same message. I have subsequently discovered that I need to remove them in a specific order, next I ran CCleaner to clear the registry. Still the same problem, so tried the install from a Clean Boot. Same problem, the wording is currently Error 2343 Specified Path is empty. I re-installed Premiere Elements which appears again to be OK before try to re-install Photoshop Elements - the same error message appears. The Start search box finds 3 register entries for Photoshop but no files. The register entries date are from earlier installation attempts on different dates: cc_20141016_211910.reg ......_141008.reg .........._213127 Should these be manually deleted? Any other suggestions?

Thank you very much.
I did uninstall Adobe Air, Adobe Reader XI and another Adobe product, rebooted, and after this the installation was possible with no problems!

PDF Export fails because of "bad" TIF files

I'm having this problem with InDesign CS3 on MacBook Pro, OS 10.5
PDF export fails occasionally, becasue of some "bad" TIF files. The weird part is that those files are completely good TIF files, which are perfectly readable by any other program! After I resave the supposedly bad file again, it helps, and the PDF export works fine. BUT - imagine me working with a project with 800 images?!! Thanks to some good scripting and forum people, I have found a way to locate the bad images quite fast by using a script that exports each page as a separate PDF, then at least I know at which page it fails. But it's a hassle to do that every time!
Last time I found about 60 "bad" files out of 862.
Why the heck InDesign treats some TIF files as bad? Even if it does, it could at least create a log file, that will tell me at which page the export failed! this could be a real help!
I've asked this question in Photoshop forums, but one of the employees replied that Photoshop doesn't produce bad files. Well, I'm not sure I can belevie that, but that's what they say.

What settings do you use when you save as TIFF ?
On PC platform sometimes InDesign treat TIFFs as "bad" when they are exported with "for Mac" settings.
Or maybe you should switch do PSD format ?
robin
www.adobescripts.co.uk

Unzip flat file in pipeline

Hello All,
One of my requirement is to unzip the flatfile in pipeline and process it and convert it in XML.
Can some one give me reference link or article... ???
Thanks and Regards, Nitin.

Hi Nitin,
In your case you have to build two pipeline components:
1) UnzipDisassembler
2) Flat file disassembler
For Unzip Disassembler you can refer to some good links below (Decode Stage):
UnzipDisassembler - A custom
pipeline component for BizTalk Server
Unzip
Files in a Custom Pipeline Component
For Flat File Disassembler you can refer to the below article (Disassemble Stage):
BizTalk
Server: Transform Text Files (Flat Files) into XML
Note: Ensure you do not place both of these components in the disassemble stage of receive pipeline. Refer to this article to
understand how pipeline component get executed. Pay attention to following point.
If this stage contains more than one component, only the first component that recognizes the message format is run. If none of the components
within the stage recognize the message format, the message processing fails.
Rachit
Please mark as answer or vote as helpful if my reply does

Errors in flat file records? how can i handle them?

Hi All,
I am new for BDC. I am uploading customer(XD01) records using BDC caltransaction method.my problem is when i am running the program, some times my program is not updating the records because of my flat file errors. after i correcting the error records and if i run the same program already updated records not processing. my program not running. what i need to do? how can i handle the flat file for reprocessing the error records?
i have around 50,000 records in my flat file.

your program accepts a flat file say the structure of it is structure_load and you create another structure similar to structure_load and name it structure_error.
loop at itab_load.
call transactions...
if success..
commit work and wait X sec.
else.
move-corresponding field to structure_error
append structure_error.
endif.
endloop.
write the file stru_error to PC or app server and make the changes to the data and use the str_error as input to your code again..

Using DTS Wizard to Import a Flat File containing data like "4124, rue Champenois"

THE BELOW DATA SHOULD BE ONE FIELD, but the COMMA causes it to separate into two fields. The FLAT FILE is a comma-delimited CSV file. The data in the CSV file for this one field actually uses double quotes at each end of the street number and street name.
"2144, rue Champenois"
"340, rue Champs Elysees"
What happens during the conversion process when using the DTS Wizard is that the street number and street name are split apart into two separate fields. This messes up the output and causes the SSIS package to fail, so that the FLAT FILE Source's data never
makes it into a SQL Server Database Table. I saw a box called TEXT QUALIFIER, so I put the DOUBLE QUOTE in there, thinking that this would keep the one field together which contains the STREET NUMBER and STREET NAME. No, that didn't work.
When using this import wizard with a FLAT FILE SOURCE, how do you keep a string that has double quotes at each end and a comma in the middle, together as one field?
Now, I went back later and started all over and put the " (Double Quote one time) in thr TEXT QUALIFIER block, and this did work. Why sometimes and not others?

Hi Champenois,
I have tried your problem.
1) Exported "DimCustomer" table in "AdventureWorksDW" to filat file with bellow query.
Query: select top 10 CustomerKey,AddressLine1 from DimCustomer where AddressLine1 like '%,%'
2) Data comes to flat file like this.
3) Then i have taken flat file source and configured like this.
4) Now went to "Columns" tab and check the data. I am getting only two columns like above.
So, Please check your flat file connection manager with above flat file connection screen shot.
Please make this as answer if, you are able to solve your problem.

Ssis - import data from flat file to table (sql server 2012)

i have create a ssis for importing data from flat file to table in sql server 2012.
but i got the below error for some column in data flow task.
error: cannot processed because than one code page (950 and 1252)
anyone helps~

Hi,
The issue occurs because the source flat file uses ANSI/OEM – Tranditional Chinese Big5 encoding. When processing the source file, the flat file connection manager uses code page 950 for the columns. Because SQL Server uses code page to perform conversions
between non-Unicode data and Unicode data, the data in the code page 950 based input columns cannot be loaded to code page 1252 based destination columns. To resolve the issue, you need to load the data into a SQL Server destination table that includes Unicode
columns (nchar or nvarchar), and convert the input columns to Unicode columns via Data Conversion or the Advanced Editor for the Flat File Source at the same time.
Another option that may not be that practical is to create a new database based on the Chinese_Taiwan_Stroke_BIN collation, and load the data to non-Unicode columns directly.
Reference:
http://social.technet.microsoft.com/Forums/windows/en-US/f939e3ba-a47e-43b9-88c3-c94bdfb7da58/forum-faq-how-to-fix-the-error-the-column-xx-cannot-be-processed-because-more-than-one-code-page?forum=sqlintegrationservices
Regards,
Mike Yin
TechNet Community Support

Uregnt - How to Load Flat File into BW-BPS using Web Browser

Hello,
We have followed the 'How to Load Flat File into BW-BPS using Web Browser' guide to build BSP web front-end to upload flat file. Everything works great but we have a requirement to populate the Planning Area Variables based on BSP drop down list with values. Does anyone know how to do this? We have the BSP coded with drop down list all we need to do now is populate variables. We can populate the variables through the planning level (hardcoded) but we need to populate them through the web interface.
Thanks,
Gary

Hello Gary,
We have acheived the desired result by not too a clean method but it works for us.
What we have done is, we have the link to load file in a page where the variables can be input. The user would then have the option to choose the link to load a file for the layout in that page.
By entering the variable values in the page, we are able to read the variables for the file input directly in the load program.
Maybe this approach might help.
Sunil

Flat File Into DW

Hi All,
I have many flat files in xls, access, csv format to be brought into the OBIDW. I have a EBS Financials, OM and SCM modules which also has some flat file data as sources.
1. whats is the general approach to bring in the flat file data to the OBIDW (I have DAC 7.9.5 and INFA 8.1.1).
---is the approach like - just build a fully customized INFA mappings with flat file as source?
OR
--first bring in the flat file data into a local staging DB without any business logic (just Data migration) and then use them as additional
tables in the pre-built INFA mappings? how are the relations between new OLTP tables built?
OR
--what is the best practice? (ppl having experience of having done this pls answer, its very critical!)
2.what is the industry standard. PLs let me know ASAP!
3. In OOTB DAC 7.9.5 I see some execution plans/ subject areas called 'Flat File' what are they used for? Any relation to the above question.??
4. any documents/ links are appreciated.
5. How is the Change Capture Mechanism realized for BI Apps as EBS as source. In Siebel I am used to Image tables. But i do not see any image table concept here in EBS. Pls help me in this regard also.
Thanks You Very much.

Hi Anitha,
You should use File content conversion to convert flat file into XML file.
Please check the below link, which help you to know how to do it.
http://saptechnical .com/Tutorials/XI/Contentconversion/page2.htm
Please check the weblink given below for converting the file content:
http://help.sap.com/saphelp_srm40/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Thanks,

HR Execution plan failing because target table needs to be extended?

I'm going a fresh install of OBIEE 10.1.3.4.1 with Dac Build AN 10.1.3.4.1.20090415.0146. This is first one so is it common to have this issue or is something else going on that I just can't see? Should I just enable auto extend on this one table or could there be corruption causing this error?
Thanks
In DAC I can validate Informatic and physical servers all connect and are OK and iunder execute, I've ran analyze repository tables and it reporting OK, ran create repository report and no errors or mission objects reports. When I run Execution plan for Human Resources - Oracle R1211 - Flexfield, it failed 5 of the 6 phases wherne 3 are stopped (never ran) and two failed (SDE_ORA_Flx_EBSSegDataTmpLoad, SDE_ORA_Flx_EBSValidationTableDataTmpLoad).
When I review the logs on the unix server under the /u02/BIAPPS_SUITE/INFR/server/infa_shared/SessLogs/ORA_R1211.DATAWAREHOUSE.SDE_ORAR1211_Adaptor.SDE_ORA_Flx_EBSSegDataTmpLoad.log, I see that it is failing because it has a problem with the target table W_ORA_FLX_EBS_SEG_DATA_TMP
READER_1_1_1> RR_4049 SQL Query issued to database : (Fri May 28 23:04:22 2010)
READER_1_1_1> RR_4050 First row returned from database to reader : (Fri May 28 23:04:22 2010)
WRITER_1_*_1> WRT_8167 Start loading table [W_ORA_FLX_EBS_SEG_DATA_TMP] at: Fri May 28 23:04:21 2010
WRITER_1_*_1> CMN_1761 Timestamp Event: [Fri May 28 23:04:22 2010]
WRITER_1_*_1> WRT_8229 Database errors occurred:
**************ORA-01652: unable to extend temp segment by 128 in tablespace BIA_DW_TBS*
When I review the ORA_R1211.DATAWAREHOUSE.SDE_ORAR1211_Adaptor.SDE_ORA_Flx_EBSValidationTableDataTmpLoad.log i found the following errors:
INSERT INTO
W_ORA_FLX_EBS_VALID_TAB_TMP(FLEX_VALUE_SET_ID,APPLICATION_TABLE_NAME,VALUE_COLUMN_NAME,ID_COLUMN_NAME,VALUE_SET_WHERE_CLAUSE, DATASOURCE_NUM_ID,VALUE_SET_SQL) VALUES ( ?, ?, ?, ?, ?, ?, ?) WRITER_1_*_1> WRT_8020
************ No column marked as primary key for table[W_ORA_FLX_EBS_VALID_TAB_TMP]. UPDATEs Not Supported.
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_ORA_FLX_EBS_VALID_TAB_TMP]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158 And then again the can't extend error WRT_8036 Target: W_ORA_FLX_EBS_VALID_TAB_TMP (Instance Name: [W_ORA_FLX_EBS_VALID_TAB_TMP])
WRT_8038 Inserted rows - Requested: 10080 Applied: 10080 Rejected: 0 Affected: 10080
READER_1_1_1> BLKR_16019 Read [13892] rows, read [0] error rows for source table [FND_FLEX_VALIDATION_TABLES]
instance name [FND_FLEX_VALIDATION_TABLES]
READER_1_1_1> BLKR_16008 Reader run completed.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Fri May 28 23:04:21 2010]
WRITER_1_*_1> WRT_8229 Database errors occurred:
***** ORA-01652: unable to extend temp segment by 128 in tablespace BIA_DW_TBS

Worked with DBA and though source tables were not huge, we extended manually and proccess completed once we re-ran.
Thanks all.

Build daily Big flat file using SAP R/3 material master data

Hi all,
I must build an interface between SAP R/3 4.7 and an external application
Daily a flat file must be generated contaning Material data in full exchange mode
(volume 100 000 materials, <10 fields => ~ File of 30Mo)
No complex mapping, only format mapping (Ex : Price quantity...)
I don't know yet if I will use Idocs or BAPI to extract data. However, I'm sure I must use multiple inbound messages because of volume
After reading documentation, I consider the both following solutions to manage it :
1) A simple asynchronous interface with a file adapter in construction mode APPEND to build flat file progressively with arrival of SAP messages
=>
viable solution ?
Is there problem of concurrent access to file in such a solution ?
(idocs or bapi data will be processed ones following the others )
2) BPM Collecting and Bundling Messages - One Interface
(Unlimited Loop with Deadline trigger correspondint to time I must build flat file)
=>
Each SAP message is a small message but the outbound XML will represent a 30 Mo flat file => Is it a problem ??
Which solution do you advise ?
Is there another ?
Last question : (more general one)
In such scenario, I can't see XI-value added comparing a creation of flat file directly with R/3.
I will generate a big number of idocs, use a big part of XI memory ...
Can you give me your opinion about it ?
Thanks a lot
Best regards
Jean-Charles
Message was edited by:
Jean-Charles
Message was edited by:
Jean-Charles

Hi Jean-Charles,
>>>volume 100 000 materials, <10 fields => ~ File of 30Mo
You have a performance task...
>>>Is there problem of concurrent access to file in such a solution ?
No, the adapter framework has its own queueing, the message would be stored and executed later. If sequence is important, you can use EOIO as well.
>>>BPM Collecting and Bundling Messages - One Interface
BPM is not required in your case, you should avoid becoz of performance task. You can append at file adapter, no problem. Bundling and splitting is even possible at Integration Server without BPM.
>>>Each SAP message is a small message but the outbound XML will represent a 30 Mo flat file => Is it a problem ??
Avoid using BAD words
>>>Each SAP message is a small message but the outbound XML will represent a 30 Mo flat file => Is it a problem ??
Use the <a href="https://websmp110.sap-ag.de/quicksizing">Quick Sizer</a> for sizing the hardware.
Regards,
Udo

XML parsing failed because ""

Hi ,
     I am facing issue while building composite in jdeveloper.It is showing below error.Please Suggest how to proceed further.
Error: XML parsing failed because ""
Buildfile: C:\Oracle\Middleware\jdeveloper\bin\ant-sca-compile.xml
scac:
     [scac] Validating composite "C:\MR96\BPEL Services\MOOA_businesservices\AddComponent\composite.xml"
     [scac] Setting BPELC option 'classpath' to C:\Oracle\Middleware\modules\com.oracle.toplink_1.0.0.0_11-1-1-5-0.jar;C:\Oracle\Middleware\modules\org.eclipse.persistence_1.1.0.0_2-1.jar;C:\Oracle\Middleware\modules\com.bea.core.antlr.runtime_2.7.7.jar;C:\Oracle\Middleware\modules\javax.persistence_1.0.0.0_2-0-0.jar;C:\Oracle\Middleware\oracle_common\modules\oracle.xdk_11.1.0\xmlparserv2.jar;C:\Oracle\Middleware\oracle_common\modules\oracle.xdk_11.1.0\xml.jar;C:\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.sca.modeler.jar;C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\fabric-runtime.jar;C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\Oracle\Middleware\oracle_common\modules\oracle.fabriccommon_11.1.1\fabric-common.jar;C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.bpel_11.1.1\orabpel.jar;C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.mediator_11.1.1\mediator_client.jar;C:\Oracle\Middleware\oracle_common\modules\oracle.mds_11.1.1\mdsrt.jar;;C:\MR96\BPEL Services\MOOA_businesservices\AddComponent\SCA-INF\classes
     [scac] java.lang.NullPointerException
     [scac] at com.collaxa.cube.lang.compiler.map.bpel.BPELProcess.lookupInitiationInfo(BPELProcess.java:1010)
     [scac] at com.collaxa.cube.lang.compiler.map.bpel.BPELProcess.addOnMessage(BPELProcess.java:903)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseOnMessage(BpelParser.java:1597)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.startElement(BpelParser.java:587)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:492)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parseElement(BpelParser.java:499)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parse(BpelParser.java:455)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BpelParser.parse(BpelParser.java:402)
     [scac] at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validate(BPELValidator.java:65)
     [scac] at com.collaxa.cube.lang.compiler.BPEL1Processor.validate(BPEL1Processor.java:329)
     [scac] at com.collaxa.cube.lang.compiler.BPEL1Processor.process(BPEL1Processor.java:153)
     [scac] at com.collaxa.cube.lang.compiler.CubeParserHelper.compile(CubeParserHelper.java:47)
     [scac] at oracle.fabric.bpel.bpelc.BPELComponentValidator.validate(BPELComponentValidator.java:40)
     [scac] at oracle.soa.scac.ValidateComposite.validateComponentTypeServicesReferences(ValidateComposite.java:1051)
     [scac] at oracle.soa.scac.ValidateComposite.doValidation0(ValidateComposite.java:502)
     [scac] at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:481)
     [scac] at oracle.soa.scac.ValidateComposite.run0(ValidateComposite.java:206)
     [scac] at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:187)
     [scac] at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:179)
     [scac] AddComponentProcess.bpel: error: XML parsing failed because ""
BUILD FAILED
C:\Oracle\Middleware\jdeveloper\bin\ant-sca-compile.xml:278: Java returned: 1 Check log file : C:\MR96\BPEL Services\MOOA_businesservices\AddComponent\SCA-INF\classes\scac.log for errors
Total time: 1 minute 27 seconds
Thanks

Hi,
Please give a try to this:(Take back up before doing this)
1. Download PATCH 11066656 .
2. Go to your JDEV_HOME/jdeveloper/soa/modules/oracle.soa.bpel_11.1.1/
and make a backup copy of orabpel.jar.
3. Copy the file orabpel.jar from patch 11066656 to JDEV_HOME/jdeveloper/soa/modules/oracle.soa.bpel_11.1.1/.
4. Restart JDeveloper.
5. Now the project should compile without the SCAC error.
This was fixed in 11.7 but since you are getting SCAC so asked the above action plan.
If it did not resolves see below steps:
=============================================================
File will be there but a class is missing which might cause this.
If you have same soa version 11.1.1.7.0 can you check that fabricruntime.jar from soa home and jdev home size is same?
In soa home it will be under Oracle_SOA/soa/modules directory.
If size is not same replace jdev fabricruntime.jar from soa home.
Also can you confirm on:
Please let me know whether you are able to deploy from EM or getting same error during deployment also? or from ant script.

Building coherence rpm fails because of Unix flat file permission.

Similar Messages

Maybe you are looking for