Burned DVD Errors

Is it too much trouble, for a DVD to burn in DVD studio pro, and...I don't know....acctually play back on other DVD players without problems?
Sigh.....here we go again.
Ok, so I have a 23 minute movie, that I'm exporting from Final Cut Pro.....into DVD Studio Pro. I've allready built up the menus, and burned several DVD's of this project, which appear to load up fine on an external DVD player....at first glance anyway.
Its only after you play it, that you realize that its dropping frames, glitching out, and eventually freezing completly around the 18 minute mark.
So, I've been doing the old "bit rate shuffle", scaling back to around a 3.0 bit rate and a 5.0 max bit rate in DVD Studio Pro.....and that helped a little, but its still locking up.
So, instead of exporting a Quicktime movie directly out of Final Cut Pro, I tried going through Compressor (using the basic "DVD: 90 minutes, best quality" settings, only I dropped the average and maximum bit rate on the video to 4.0 & 7.0, respectivly).
I did that, and burned a new copy.....and now it won't even get out of the main menu without locking up.
So now, I'm completly stuck. I have no idea what I'm doing wrong.
Can please, someone....anyone.....tell me what I'm doing wrong?
(Is there a proper setting, of bit rate, max bit rate, etc.....that will result in a burned DVD that should be compatible with most DVD players, without sacrificing too much quality?)
Just in case its helps, I'm using:
* Verbatim DVD-R discs.
* Final Cut Pro 5.0.1
* DVD Studio Pro 4
Thanks in advance, guys.
- Fred

Hi Panic:
Wellcome to the forums !
Most probably your problem is related with your disc audio format. Uncompressed audio (AIFF/PCM) is one of the most common causes of playback issues of DVD-R in standalone players. The bitrate of the uncompressed audio it's too high for some players.
For a 23 min movie you can use the standard DVD: high quality 90 min settings aplying the MPEG2 and the Dolby 2 (AC3) presets. Encoding your movie inside DVDSP gives AIFF audio, and when you used Compressor you didn't mention encoding your audio to AC3.
You can duplicate the standard AC3 preset and change these settings to keep your original audio level:
- Dialig Normalization: -31
- Compression preset: None
If you want to try a second video encoding option, you can duplicate the standatd MPEG2 90 min preset and change it to CBR encoding:
A last point, you can control your burn speed building first your project and creating a Disc Image in your drive and burning the discs outside DVDSP. Read this tutorial: Creating Disc Image in DVDSP.
Hope that helps !
Alberto

Similar Messages

Will Not Burn DVD: Error code 0x8002006D

Hello
I have a 12" PowerBook G4 fitted with a SuperDrive running Tiger 10.4.11. My machine will still play & burn CD's it will still play DVD's but it will not burn DVD's.
When trying to burn a DVD it comes up with following message:
Sorry, the operation could not be completed because an unexpected error occurred
(Error code 0x8002006D).
I am trying to burn using Verbatim DVD-R, which I have successfully used in the past.
Any ideas what the problem is, and are there any possible solutions?
Thanks for any help.
Message was edited by: bob1144

Silly rabbit wrote:
...it has always been fixed by running Onyx (maintenance). Some of the other users will condemn the use of Onyx, but I have never had any issues with it in four years of using it.
I've never had any issues with it either, I still think it's a good utility.
For burners, an external would be easiest to use as it plugs into a port on the machine. The lacie burners are ok, overall decent software & firmware support. I tore my apart to use the drive in a G4 tower, software all still works!
Get one that can use firewire & usb. the PPC will boot from a firewire external DVD & it could also be used later, if needed, on a machine that doesn't have FW.
Another option is macsales.com here in the States sells the exact same slot drive apple does for about $90. They do ship internationally, about $25 USD to London. If you want an internal solution this would be the way to go.
http://eshop.macsales.com/item/Other%20World%20Computing/MCTDVDSDB8DL/

Unable to burn dvds Error code 0x8002006D

I can burn cds but not dvds. I get this error message: Error code 0x8002006D Any ideas?

Hello JoanneD
The iMac Super Drive's, are picky about the brand of dvd.
1. restart and try again
2. try cleaning the drive
3. try another brand of dvd
Google Search: [Error code 0x8002006D|http://www.google.com/custom?hl=en&client=pub-6263300333013957&cof=F ORID%3A1%3BGL%3A1%3BLBGC%3A336699%3BLC%3A%230000ff%3BVLC%3A%23663399%3BGFNT%3A%2 30000ff%3BGIMP%3A%230000ff%3BDIV%3A%23336699%3B&ie=ISO-8859-1&oe=ISO-8859-1&q=Er rorcode0x8002006D&btnG=Search]
Dennis

IDVD5 Burning DVD Error Code # 34506

Can anyone help me find this problem and how to solve it. I have tried every method possible to make a DVD from a 22 minute iMovie made from still shots and a variety of music pieces(including some purchased on iTunes). Tried making Quicktime movie also, but no luck.
Thanks
iMac G5 Mac OS X (10.4.2) Has iLife05
iMac G5 Mac OS X (10.4.2)

Well, there are no Apple Articles about that particular code, mostly, I believe, because it is a general error that may be caused by many things. I gave you the most common cause...but now it is time to check a couple of other things.
Have you tried trashing the iDVD preference files?
Quit iDVD.
Locate a file named com.apple.iDVD.plist and get rid of it. iDVD will create a new one the next time it runs. Empty the trash and run a permission repair using the Disk Utility.
The files you need to trash are found:
-->/Users/YourName**/Library/Preferences/com.apple.iDVD.plist
To read more abut this error:
Error #34506 Click Here
Sue

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

Error when burning DVD

I just bought a Mac a few weeks ago, and have had some trouble burning DVD's. I have a G5 running 10.3.9, with a Pioneer Superdrive. I try to burn an image in Disk Utility, but get the error message "The disc is reserved for exclusive use by another application". When I try just burning files using finder, it says "This disc cannot be used". I have tried DVD-R and DVD+R. Anyone have any ideas?
Thanks!

Hi macaboo
Welcome to apple discussions. Just to add to the already excellent advice kindly provided to you by Fred Shippey;
I too have one or two suggestions:
First is to delete the plist for iDvd (but first quit the app). The plist is located in your preferences folder and looks like this (assuming the app has been launched at least once):
com.apple.iDvd.plist
Now try your iDvd project again. But if that too fails then ...
Delete encoded assets from the Advanced menu tab and then try the burn again.
That procedure looks like this. Hope this helps but if not just come on back. Good luck.
Click Here
Message was edited by: SDMacuser

Error when burning dvd's

I have a satellite a305 with vista. I had been downloading torrents awhile back and got a nasty something because my computer went crazy. I managed to "fix" it except that the keyboard and mouse were nonresponsive. A usb mouse worked but no usb keyboard would install. Despite this, I was still able to burn dvd's.
Now, since it is unacceptable to NOT have a properly working keyboard I had to factory reset the computer. Now it all works great.
EXCEPT when I burn a dvd (dropping files to it....I haven't downloaded any 3rd party software) it starts to encode...gets to about 3.5% and then encodes super fast (usually burning a dvd takes 1 1/2 to 2 hours) and eject the disc after 30 seconds. A window pops up saying an error ocurred while burning the dvd. I am using memorex dvd-r discs. It did the same thing when I used my old disks (Sony dvd-r) but I assumed that since they were scratched a bit that must be causing an error.
I just want to make my DVD's. So frustrated!! I tried checking to see if Toshiba had a driver update I was missing since I did an out of the box reset, but they're screen to choose my laptop doesn't have my model available.
Any ideas for me?

Since Toast is not an Apple product, you should probably post your question on Roxio's discussion boards:
http://forums.support.roxio.com/

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

Error message when burning DVDs

Hi, I've been burning DVDs on my computer for over a year. However I'm now getting the following error message:
sense key = medium error
sense code = 0 x 57
Unable to recover table of contents.
I've tried documents and video and a couple of different blank DVD brands...Is it stuffed or fixable. FYI the cd burner is working fine and its reading DVDs Ok as well.
Thanks
Peter

Thanks for the suggestion.
I ran the Onyx on both my machines and still have the same problems.
The PB 1.25 whirls and spits the discs out (any disc).
The iMac 800 now has a new error code since running Onyx.
0x80020022 instead of 0x8002006e
The message reads "communication to the disc drive failed."
I'm going to try one last thing with the iMac. That is using those expensive Apple-made and approved DVD's. I'm using Maxell DVD-RW. Never had a problem with them on the PB, never used them on the iMac. I'm off to the dealer... I'm buying an external DVD burner for the PB- $200 vs. $600... it's a no brainer, just none of the convenience... best, Edward

Error occur when burning DVD

My macbook pro can't burn DVD, both DVD-r and DVD+R DL.
I tried to use a better media (eg. verbatim) and slower speed (1X)
but the problem comes again and again.
I suspect the error may relate to the failure of "laser component" in the DVD drive
Because when I was using LiquidCD ,whcih is a DVD buring software, to burn DVDs,
the error message said that the software cannot control the strength of the laser.
Does it mean the problem relates to the failure of "laser component" in the DVD drive?
Also, I tried Hardware Test, but it said everything is fine.
Any method can help to check or solve the problem?

Take it to an Apple Store or call Applecare assuming it is under warranty. Is this problem only with this software, which I have to admit I have never heard of.
Out of warranty I'd get an external burner vs. fix it since they perform better anyway.

Hardware Error when burning DVD's

I keep getting an error message when burning DVD's using Toast Titanium on my iMac..it reads:
"Drive Reported an error, Sense key = hardware error, sense code = 0 x 03."
Twice after getting that message I couldn't continue to burn and it stopped, once it did continue to burn and finished successfully. Any ideas, anyone?
17" iMac G5 w/ iSight Mac OS X (10.4.3) upgraded to 1GB RAM

I get the same message today when burning from Toast 7.02 on my iMac. It happened when I was trying to make an audio CD from my iTunes collection (not when Copying from CD to CD). The exact message I got in the middle of my burn was:
The drive reported an error:
Sense Key = hardware Error
Sense Code = 0x03, 0x01
I tryed again with another CD and got the same thing. I never had a problem with these CD's (TDK CD-R up to 48x).
I wonder if there has to be some sort of software upgrade fro Roxio Toast or is this a superdrive malfunction/etc. My Superdrive gets very loud during this burn as well. I may take it in to Apple Genius Bar. Any ideas?

Error when burning DVD RW (Error Code 0x8002006E)

Works with DVD +R, -R, CDR... but it wont burn DVD+RW for some reason
I had this problem 3 years ago when it refused to burn CDs, and I had my ODD replaced with one of these
MATSHITA DVD-R   UJ-857E:
Firmware Revision:          ZF1E
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, DVD-DAO
Media:          Insert media and refresh to show available burn speeds
So here I am again having the same problem - 'burning the disk failed because an unexpected error occured (Error Code 0x8002006E)
I tried both burning from Finder and disk utiilty. I tried quickly erasing the data on it, which was nothingnd when I tried to burn something it threw up this error - 'The disk can't be burned, because the devide failed to calibrate the laser power level for this media' (their bad grammer not mine)
So what is this a software problem or another faulty ODD?
I ran a hardware test recently and no problems were identified.

I just tried it again using a different account, same problem. I was burning DVD+Rs already today, then I went out and bought a packet of discs from tesco DVD+RW and they wont burn no matter which way I try it. I remember having this problem with Tesco CDRs 3 years ago when I sent my macbook in for repair, but I think I have used tesco discs since thren without problems. I've had trouble on two occasions reading music CDs as well + the drive is sluggish and noisy when inserting/ejecting discs.
Finding a lot of threads on this and not really much in the way of solutions. At best I've been able to ascertain that the problem is probably software related owing to the error code.
I don't know what else to try. I hope tesco take back this stack of discs that's probably got nothing wrong with them, I doubt Apple will refund me.
This computer has just turned out to be an endless source of problems and headaches.

I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT

ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
Thanks!
Home Brew Windows XP Pro

Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

Burned DVD Errors

Similar Messages

Maybe you are looking for