Burned DVD issues in DVD player not reading or music issues stop and start

I'm a PC converted to a MAC (less than a month) and love it so far. I have been able to create and burn a DVD. The problem I'm having is one DVD player will not read the DVD (Hitachi). The other DVD player will play it, but the music stops and starts when it transitions (twirl) to another picture (Panasonic DVD/VHS combo). I'm using a DVD R Memorex. Neither one of the player are new. Would love to use this to make the Grandparent's a DVD of the grandchildren from birth to present as Christmas present. What do I need to use or do to be able to watch on any DVD player as well as the computers?
Message was edited by: me01

Hi me01
Welcome to apple discussions. Try using 99 photos / less to avoid issues with audio fades / drops. Also do a search for Memorex on this forum and you'll see it's not the first choice of dvd's for most users. Instead try Verbatim, Maxell, or Taiyo Yuden and burn at 4x from a disc image for best results. Wish you luck and feel free to post back with results or any further questions.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Similar Messages

  • DVD will not stop and start in a Menue Mode

    Hello I am using DVD Studio Pro 4 for a school project and i am looking for some help with this problem.
    The DVD i have created plays and stops when i am watching one of my video tracks, i just can not start the DVD when i am previewing in any menue after i stop it.
    I have created my DVD with 16 menus and 2 video tracks. It burns and plays back fine but i can not stop and start the DVD when i am in a menu mode. The DVD will stop and play when i stop the DVD playing video from one of my video tracks but when i am in menu i push stop on my DVD controller and the DVD will not start back up. The DVD will look like it wants to play but it will not play. I have to open the DVD player tray open in order for it to start the DVD again.
    The DVD is a NTSC, SD, single layered 2.9GB
    Any help would be much appreciated, Thanks.
    Mike
    PowerBook G4 15 1.25 ghz   Mac OS X (10.3.9)  

    If only five months old it is still under warranty. Take it back.

  • Why ill the flash player not intialize even after disabling firewall and antivisurs software

    Why will the flash player not intialize even after disabling firewall and anitvirus software?

    Windows XP and internet exployer?  I can get the flash player to begin the
    download but stops at about 50% initalization
    Greenleaf Compaction, Inc.
    142 W. Main
    P.O. Box 265
    Hopkins, MI  49328
    Phone:  1-877-552-9369
    Fax:  (269) 793-7298
    New email address: [removed]

  • My optical drive will not read any music cds now or recognize a blank cd in the drive. it might read some data discs. what is wrong with it and how do i fix it?

    My optical drive will not read any music cds or recognize a blank cd. it might read some data cds. what is wrong with it and how can i fix it?

    The optics might be dirty. Try running a cleaning CD through it and see if that makes a difference.
    If not, it will have to be replace.
    Allan

  • APEX 4.2 aligning issue of Stop and Start Grid Layout item

    My APEX application application is in the process of moving from 4.0 to 4.2.  I am experiencing an issue with aligning (left margin justified) of Stop and Start Grid Layout items that have a border around them.  Earlier I had an issue with the border itself not showing up in the 4.2 application.  I was able to resolve that with a workaround by adding inline code in the CSS section of the page: #P23_OFFICE_START_TBL {width:682; border:1px solid #369; margin:5px;}. This created the border which I needed, but there are 2 Stop and Start Grid Layout items that are indented and not aligning with the border of the previous line.  I have tried a number of different things but none of them have worked.  This seems like a very simple issue to fix but I am having a tough time resolving it.
    I tried to put the item in question in a different grid, which corrected the indention but then I lost the border around the item.  It seems that the above CSS code does not work on the new grid.  I also tried to put attributes such as margin-left:5px; float: left; clear: left; float: left, in the CSS code but that did not work, too.
    Any suggestions?
    Thanks
    Ajay K

    I deleted and added back the Stop and Start Grid Layout items not aligning properly.  This worked.  Apparently, the 4.0 to 4.2 upgrade did not handle/convert these items properly.  Deleting and adding them back resolved the issue.

  • Task created to stop and start Health service not working.

    We have multiple servers being grayed out so we created a task to stop and start the health service on SCOM 2007 R2. We have created two tasks one to stop and another task to start. The STOP task works but the START tasks keeps running but there is no result
    as well as when i check in Services.msc it is still stopped. Below are the screen shots .
    Task created to STOP the health service which is running.
    Screen shot of service start task creation which is NOT working
    The same was created for another service windows audio. Which worked for both stop and stop (Created separate tasks).
    We also tried the recycle health service and chche which is also failing.
    Can any one please help. The issue is on both SCOM 2007R2 and 2012 R2 both. Is there any other way to touch the health service.
    We are facing the issue only with Healthservice.

    Hi All,
    Thank you for all your answers.
    @ dktoa -
    You are right we have to concentrate on the servers to determine why do they go grey (all in one site). But before we do that i felt i find a temporary solution. Then go deep investigation to solve the issue.
    @Yan LI: As per the likn provided above you. I overrided the servers but still the health services were not starting or restarting. When i created a custom group and added the servers to that  group in that site and then  enabled the override on Restart
    Health Service for a specific group and pointed towards that group then it worked.
    Thanks All.

  • Flash player stops and starts intermittently

    Does anyone know why videos stop and start intermittently. It becomes frustrating to watch and I eventually give up.

    op sys win 7 adobe flash player 10
    I have the same problem.  it seems related to bandwidth.
    i am limited in my data plan to 256 kb/sec
    i did not have this problem a year ago.  but had it when i used win xp as well.  Today noticed a site where i could choose low speed, medium speed or high speed bandwith. i chose the low speed 265 kb and the video played flawlessly without stopping and starting
    I claim no expertise and eagerly await some informed advice on whether it is possible change a setting within flash player to accomadate us low bandwith users.

  • Adobeflash player ver. 11.8.800.94.0 keeps stopping and starting during video. How do I correct this

    The newly downloaded version of Adobe Flash player 11.8.800.94.0 keeps stopping and starting during video presentation.  I have to keep mouse cusor moving on the screen to prevent the video stopping. The previous version I had did not have this problem. Nothing else has changed on my system.  What is wrong here and how do I correct it?

    Uninstall your Shockwave plugin (from the Control Panel)
    Download and reinstall it: http://get.adobe.com/shockwave/

  • Player stops and starts intermitently

    My player just suddenly started stopping and starting unwantedly. Player lives in a hard case with rubber coating. Never dropped, or any issue of the
    sort. I have alot invested in this device, help needed please.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • Adobe flash player stopping and starting.

    I have the up to date flash player but it keeps stopping and starting when watching RTE live for matches etc.

    To better assist you with this issue we need to know:
    What is your operating system? (Windows or Mac) (XP, Vista, 7, 8)
    What browser do you use? (Internet Explorer, Firefox, Chrome, Opera, Safari)

  • I have downloaded the 30 day free trial using Adobe Download Assistant but I do not know how to open it and start using it.

    I have downloaded the 30 day free trial using Adobe Download Assistant but I do not know how to open it and start using it.

    This was so annoying!! It took me a good couple of hours but i figured it out, you need to do the following: Go to the folder where you saved the download (in my case i saved it in My Downloads) -> click on 'Adobe Photoshop Elements 12' -> click on 'PSE 12' -> click on 'Setup' (select the icon which is a box with a shield) -> follow instructions and....voila! You will need to restart when it suggests so save anything else first, then when it reboots you should see the icon on your desktop....hpe this helps!

  • Why can I not watch a video all the way thru without it stopping and starting, & freezing?

    I like to go to abc or cbs pbs etc. and watch their videos but they do
    not run all the way thru. They stop and start and stop and start and
    freeze and start and quit.

    If there are problems with updating then best is to download the full version and uninstall the currently installed version.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore
    Some have reported that increasing the session store saving interval worked for them.<br />
    See:
    * http://kb.mozillazine.org/browser.sessionstore.interval
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    You can use the Filter bar at to top of the about:config page to locate a pref more easily.

  • TS3694 I am getting an ' unknown error (-50) every time I try to back up any of my I phones or iPad. iPhoto will not sins. Music, Books Calendars and Contacts all sync OK

    I am getting an ' unknown error (-50) every time I try to back up any of my I phones or iPad. iPhoto will not sins. Music, Books Calendars and Contacts all sync OK.

    I am stil getting error message: unknown error (-50) when I try to synce iPhotos. Doesnt matter what device ( iPad mini, iPhone4s or iPhone3s), or how I connect (USB or WiFi).
    I have looked at iPod photo cache and the following message comes up:
    How can I get it to execute the binary file?
    Mi Stewart
    Last login: Sun Feb  2 21:11:58 on ttys000
    /Users/adriennebrazier/Pictures/Alexander/iPod\ Photo\ Cache/Photo\ Database ; exit;
    [Macintosh:~] adriennebrazier% /Users/adriennebrazier/Pictures/Alexander/iPod\ Photo\ Cache/Photo\ Database ; exit;
    /Users/adriennebrazier/Pictures/Alexander/iPod Photo Cache/Photo Database: /Users/adriennebrazier/Pictures/Alexander/iPod Photo Cache/Photo Database: cannot execute binary file
    logout
    [Process completed]

  • Apple TV problem- Netflix message not availabale at present etc.  On Itunes playing a movie the sound stops and starts how can the downloading hurry up.  On the computer all OK.

    Netflix keeps posting not available- have restarted it as directed but still a problem.  Itunes movies dont download fast enough and stop and start. On the Imac computer no problem with sound or viewing.

    What is your current connection using speedtest.net
    I would check for interference using istumbler
    Make sure DNS is set correctly on ATV (settings - general - network - configure DNS - automatic)

  • HT4623 I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

    I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

    You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6

Maybe you are looking for

  • Option "ctrl:nocaps" in /etc/X11/xorg.conf.d/10-evdev.conf ignored

    Hi all, I have a single-user laptop, so I'd like to configure my X keyboard layout and options globally instead of doing it for any WM/DE I might happen to use.  And most importantly, the desktop manager (GDM) should already use my layout.  So my /et

  • Vendor Invoice Number in FBl1n

    Hi MM Gurus, The client requires to have the Invoice Number which is generated at the time of LIV in FBL1n T. Code. I am getting the Accounting Document Number of Invoice but not the Vendor Invoice Number. I have tried everything from the Change Layo

  • Read and edit a txt file in Air 2.5

    im building an android application, the database i have to use is a txt file, on the device file system i tryed many codes from the internet but none of them worked. can someone write an example code of how to read and edit this file? im a beginner s

  • Wily Introscope Manager

    Guys, I have some questions about Wily Introscope Manager. What is the difference between Wily Introscope Manager Workstation and WebView? I noticed that some data are not collected from Wily Agents, for instance: CPU, Servlets and so on..How can I s

  • Why Mail doesn't show content of emails?

    Since some days Apple Mail doesn't show always the content of an e-mail message. In the window at the right hand of the columns with folders and incoming mail and in the fullscreen mode only the headers (To, From, Subject) are visible, not the conten