Bursting with Report's input parameters

Hi experts,
I am running BIP bursting feature, and this is working fine. Now, my customer is needing to enabling bursting feature by passing report´s input parameters. It is possible to set the bursting sql query to accept report´s input parameters?. If yes, how can I get that?.
I am working with BI Publisher 10.1.3.4.1
Regards,
Edited by: Farid Leonardo on 20/09/2012 14:48

Hi
You can add parameters to the bursting query
Please see if this helps
http://docs.oracle.com/cd/E24001_01/bi.1111/e18862/T527073T555155.htm#T568844

Similar Messages

Need some help... with report's user parameters

When i run my report from report builder, i get a prompt window to input some values, to query my results. When i run the report from a form i don't get a prompt window. Anything that am doing wrong?

basically i want to pass parameters from form to report to query me records. How can i do that?
I have try the add_parameter ... with no luck....below my code..
---> 'TMPDATA' ?????????? what is this?? i place it after reading some posts over here.
DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(1000);
     V_PL_ID PARAMLIST;
BEGIN
     V_PL_ID := GET_PARAMETER_LIST('TMPDATA');
     IF NOT ID_NULL(V_PL_ID) THEN
     DESTROY_PARAMETER_LIST(V_PL_ID);
     END IF;
     V_PL_ID := CREATE_PARAMETER_LIST('TMPDATA');
     Add_Parameter(v_PL_ID,'LOGINNAME', TEXT_PARAMETER,:LOGINNAME);
     Add_Parameter(v_PL_ID,'PARAMFORM',TEXT_PARAMETER,'YES');
     repid := FIND_REPORT_OBJECT('CUSTOMER_REPORT');
     v_rep := RUN_REPORT_OBJECT(repid);
END;

Procedure to INSERT with data as IN Parameters O-R Nested Table

Hello Friends
I'm a newbie and learning oracle 10G. I've the following DML INSERT statements which are working fine. I was hoping to convert these into a procedure with data as input parameters and so far achieved nothing. Could anyone please help me in writing a procedure for this ? Any code or even pointers in the right direction is highly appreciated. I've read in other forum posts that procedures are slow and in efficient, but as a beginner I just want learn the concepts.
INSERT INTO tab_cust
VALUES (
1, 'Ray Bloggs',
obj_addr('51 Local Close', 'Nomansland', 'Sussex', 'GU6 9UI'),
var_phoneList('123456','7891011')
INSERT INTO tab_po
SELECT 1001, REF(C),
SYSDATE, '10-MAY-2009',
tab_lineitem(),
NULL
FROM tab_cust C
WHERE C.CustomerNo = 1 ;
INSERT INTO TABLE (
SELECT P.LineItemList_nestab
FROM tab_po P
WHERE P.PONo = 1001
values(11233, 12, 500);
INSERT INTO TABLE (
SELECT P.LineItemList_nestab
FROM tab_purchaseorder P
WHERE P.PONo = 1001
values(11234, 90, 900);
Thanks and Regards

Guess the below link should help you to get started:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/overview.htm#sthref196

Calling report from a form with user input parameters

Hello,
I am new to Oracle reports. I have an application coded in 6i. I am currently running the application in Oracle Forms Builder 9i. There are also few reports which are called from the forms. Since the application was developed in 6i, the report was called using Run_Product. The forms pass a set of user parameters to the report using the parameter list pl_id. The syntax used was Run_Product(REPORTS, 'D:\Report\sales.rdf', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);
I learnt that the Run_product doesnt work in 9i and we need to use run_report_object. I have changed the code to use run_report_object and using web.show_document () i am able to run the report from the form. There are 2 parameters that need to be passed from forms to reports. The parameters are from_date and to_date which the user will be prompted to enter on running the form. In the report, the initial values for these parametes are defined. So, the report runs fine for the initial value always. But when i try to change the user inputs for the form_date and to_date, the report output doesnt seem to take the new values, instead the old report with the initial values(defined in the report) runs again.
Can someone give me the code to pass the user defined parameters to the report from the forms? I have defined a report object in the forms node as REPTEST and defined a parameter list pl_id and added form_date and to_date to pl_id and used the following coding:
vrepid := FIND_REPORT_OBJECT ('REPTEST');
vrep := RUN_REPORT_OBJECT (vrepid,pl_id);
But this doesnt work.
Also, Should the parameters defined in the forms and reports have the same name?

Thanks for the quick response Denis.
I had referred to the document link before and tried using the RUN_REPORT_OBJECT_PROC procedure and ENCODE functions as given in the doc and added the following SET_REPORT_OBJECT_PROPERTY in the RUN_REPORT_OBJECT_PROC :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
But this also dint work. Please help me understand what difference does setting paramform=no OR paramform=yes make?
In the report, i have defined the user parameters as FROM_DATE and TO_DATE respectively so that they match the form datablock BLK_INPUT items FROM_DATE and TO_DATE.
My WHEN_BUTTON_PRESSED trigger is as below:
DECLARE
report_id report_object;
vrep VARCHAR2 (100);
v_show_document VARCHAR2 (2000) := '/reports/rwservlet?';
v_connect VARCHAR2 (30) := '&userid=scott/tiger@oracle';
v_report_server VARCHAR2 (30) := 'repserver90';
BEGIN
report_id:= find_report_object('REPTEST');
-- Call the generic PL/SQL procedure to run the Reports
RUN_REPORT_OBJECT_PROC( report_id,'repserver90','PDF',CACHE,'D:\Report\sales.rdf','paramform=no','/reports/rwservlet');
END;
... and the SET_REPORT_OBJECT_PROPERTY code in the RUN_REPORT_OBJECT_PROC procedure is as:
PROCEDURE RUN_REPORT_OBJECT_PROC(
report_id REPORT_OBJECT,
report_server_name VARCHAR2,
report_format VARCHAR2,
report_destype_name NUMBER,
report_file_name VARCHAR2,
report_otherparam VARCHAR2,
reports_servlet VARCHAR2) IS
report_message VARCHAR2(100) :='';
rep_status VARCHAR2(100) :='';
vjob_id VARCHAR2(4000) :='';
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (report_id,REPORT_DESFORMAT);
hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new =' ') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old =' ' and c_new = ' ') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
c_old := c_new;
END LOOP;
hidden_action := hidden_action ||'&'|| v_report_other;
hidden_action := reports_servlet||'?_hidden_server='||report_server_name|| encode(hidden_action);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='||hidden_action||' '||report_otherparam);
-- run Reports
report_message := run_report_object(report_id);
rep_status := report_object_status(report_message);
IF rep_status='FINISHED' THEN
vjob_id :=substr(report_message,length(report_server_name)+2,length(report_message));
message('job id is'||vjob_id);pause;
WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id||'?server='||report_server_name,' _blank');
ELSE
--handle errors
null;
END IF;
In the code - " hidden_action := hidden_action ||'&'|| v_report_other; " in the RUN_REPORT_OBJECT_PROC procedure above, how do i make sure that the v_report_other variable reflects the user input parameters FROM_DATE and TO_DATE ??? v_report_other is initialised as v_report_other VARCHAR2(4000) :=''; in the procedure. Will ensuring that the v_report_other contains the user input parameters FROM_DATE and TO_DATE ensure that my report will run fine for the input parameters?
Thanks in advance.
Edited by: user10713842 on Apr 7, 2009 6:05 AM

Crystal Report with standard Input-Parameters in InfoView

Hi there,
i've created a crystal report which has non-optional input parameters, e.g, Date from ... Date to ...
I've managed to fill this parameter with standard parameters if the user does not choose a value. e.g. date is today - 14 days.
If i start the report in crystal and do not enter a input-parameter, it gets it input parameer automatically, see:
(if not hasvalue({?PARA_TA_von}) then ({PW_BO_HU_TA.LTAP-WDATU}>=CurrentDate-14) else ({PW_BO_HU_TA.LTAP-WDATU}>={?PARA_TA_von}))
It works perfectly in crystal. But if i start the Report in Webintelligence Infoview, it doesn't work and i get the message to enter the input-parameters....
Any idea ?
Thanks,
Sebastian

Hi Ingo,
I have tried the sample reports and other crystal reports created with data sources other than SAP which all work fine. The problem happens on all clients and the server when running reports with SAP data source.
I did find an error in the Tomcat logs.
[/SAP].[jsp] Thread [http-8080-Processor24]; Servlet.service() for servlet jsp threw exception
java.lang.NoClassDefFoundError: com/crystaldecisions/Utilities/LengthLimitedDataInputStream
I did manage to run one report which had 4 records but the other reports which vary from 432 - 2500 records return the error found in the tomcat logs.
I will be installing BOE XI 3.1 on my desktop to see if the still issue occurs in this release.
Thanks and Regards,
Paul.

How to validate the input parameters in Oracle BI Publisher reports

Hi
i am new to Oracle BI Publisher
I am using OBI for generating simple reports.
here i need validation for input parameters (Date Parameter) and also want to disable the Date filed so that user can select through the calendar component.
Here validation in the sense, the system must validate the date and alert the user with an appropriate message
Can anyone please provide me the solution in detail.
Thanks in advance
Edited by: user10185520 on Aug 26, 2008 6:15 AM

I have the same task to validate input parameters with Oracle BI Publisher 5.6.3 running under Oracle eBS 10.5.10.2. My validation goes beyond of what I can do during parameter registration. I am using Data Templates.
My first logical place was the before report trigger. So, I built a report trigger which returns 'false' in case the parameters are not proper. Guess what... XMLP just returns a hard-coded message
!!Error : trigger '" + datatrigger.getName() + "' returns status as 'false'
First of all, this is a bad style to hardcode messages visible by the user (especially during French implementation). Second of all, it is not informative at all. It would be nice to change oracle.apps.xdo.dataengine.XMLPGEN.executeTrigger() to read, for example, a message from the message stack when the trigger returns 'false' and let the user read it.
Anyway, what I did was I built a special data group, decalred before any other data group, query like
select my_package.my_validation fro dual
If parameters fail the validation my PL/SQL package throws an application exception with a message. At least, in this case the error message gets available as the description of the concurrent request.
I wish the before report trigger worked!!!

Validation of input parameters in Oracle BI Publisher reports

Hi
I am new to Oracle Bi Publisher.
In my project i am using oracle BIPfor generating simple reports.
here i need validation for input parameters (Date field) and i want to make it (Date field) disable, so that user can select the date through the Calendar component only.
Can anyone please provide me the solution in detail, it is urgent.

I have the same task to validate input parameters with Oracle BI Publisher 5.6.3 running under Oracle eBS 10.5.10.2. My validation goes beyond of what I can do during parameter registration. I am using Data Templates.
My first logical place was the before report trigger. So, I built a report trigger which returns 'false' in case the parameters are not proper. Guess what... XMLP just returns a hard-coded message
!!Error : trigger '" + datatrigger.getName() + "' returns status as 'false'
First of all, this is a bad style to hardcode messages visible by the user (especially during French implementation). Second of all, it is not informative at all. It would be nice to change oracle.apps.xdo.dataengine.XMLPGEN.executeTrigger() to read, for example, a message from the message stack when the trigger returns 'false' and let the user read it.
Anyway, what I did was I built a special data group, decalred before any other data group, query like
select my_package.my_validation fro dual
If parameters fail the validation my PL/SQL package throws an application exception with a message. At least, in this case the error message gets available as the description of the concurrent request.
I wish the before report trigger worked!!!

Issue with Input Parameters & Variables

Hello Gurus,
I have a situation where, when the user enter “Parent Company” say for ex: ABC, then the over all
Result should filter by ‘ABC’, and then there is key figure column where I need to consider not equal to ABC and then sum the key figure.
In HANA, here both variables and Input patemters are mutually exclusive. Is there any way that I can pass the value of the variable to the input parameters without writing the code in Analytical or calculation views.
If it’s BW-bex, it was very straight forward, I can create the variable for parent company ‘ABC’, put it as global filter, so that whenever the user selects ‘ABC” it should display on ABC data in the out put.
I can also use the same variable and crate calculated column in BEx and attach the variable to the key figure and say the sum the key figure but exclude the Parent company “ABC’.
I have tried the projection view and try to put filter on it, but it did not work. My requirement is
Whenever the user selects ABC, it should display only ABC data, only 10 records out of 100 records and for one key figure column; I need to aggregate but excluding the Parent company “ABC”.
Can I pass the Variable value to input parameters without writing the code?
Regards
Ramakrishnan Ramanathaiah

How about the following:
Assuming you have 2 characteristics (Plant and Parent company) and 1 KF (Net Sales).
Now let's create a projection with Filter using Input parameter on Parent company (with user input value as ABC), which might give the output as:
Plant
comp
Net Sales
P1
ABC
10
P2
ABC
5
Now, let's create a second projection with the Calc KF "Net Sales calculated" with the formula as:
if comp = $input_value$, then 0 else Net_Sales.. this way you can simulate the EXCLUDE functionality.
Plant
comp
Net sales
P1
ABC
0
P1
BCD
15
P2
ABC
0
Now union both the projections with two diff KFs, Net Sales and Net Sales Calculated.
Plant
Net Sales
Net Sales Calc
P1
10
15
P2
5
0
Subsequent model depends on your reporting drilldown requirement. If you drilldown Parent company also in the rows, then you will see the split in the values.
Please try this and let us know if it works or what other issues come up.. we can try resolving the issues..
Ravi

Error while creating a BO Universe (using IDT) on top of SAP HANA Calculation View with Input Parameters

Hi All..
We are trying to create a Universe (using IDT-Version4.0) on top of the HANA Calculation view. The Calculation view has 4 input parameters, So
in Universe side we have created the respective prompts. For the creation of derived table we have used the following code
SELECT *
FROM "_SYS_BIC"."<schema_name>.<CV_Calculation_View_test>"
'PLACEHOLDER'=('$$IP_A$$','@Prompt(A)'),
'PLACEHOLDER'=('$$IP_B$$','@Prompt(B)'),
'PLACEHOLDER'=('$$IP_C$$','@Prompt(C)'),
'PLACEHOLDER'=('$$IP_D$$','@Prompt(D)')
While validating the above code we are getting an error.
I have attached the snapshot of that error for your reference. Please find the attachment and help me in resolving it.
Thanks in advance.

Hello George,
I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
Thanks,

How to write a SQL query in SAP B1 2007 B with input parameters?

How to write a SQL query in SAP B1 2007 B with input parameters, on execution of which will ask for some input value from the user and the values will be selected from a list such as item list?

The syntax like
SELECT * FROM OITM T0 WHERE T0.ItemCode = '[%0\]'
Thanks,
Gordon

Report with XML as input !

Hello,
I am hv been trying to create a simple report with an XML input but by the end of it, it doesnt give any data on the report.
I tried it with XML + SQL input, it gave me a blank report and when I tried with a pure SQL input it did give data in the report. I enabled the trace option but couldnt get to the core of the problem.
My XML & XSD file are all valid, they are auto-generated.
The report doesnt give any error either.
Any clue what the problem could be ??
Regards,
Madhu.

Post Author: ashdbo
CA Forum: Data Connectivity and SQL
I think it can be done by looking at Crystal Report XI.BUTHow can I do this programatically in Java ? Thanks,Ashok

Bursting a report with multiple queries

Hi,
I need to set-up bursting in BIP for a report with multiple queries. The output format is pdf and delivery is through e-mail. Since the queries need to be linked, I'm trying to do this using data template. I've set-up split and burst based on a field (store_id) from the first query which is used as a bind variable in the subsequent queries. So I'd ideally want the report to be split based on store_id. The report works fine if I use a parameter for store_id and view the output by store_id. When I try to schedule the report for bursting, it generates and e-mails the reports but only the last report appears to have correct data output while the others have only the output from the first query (and all other queries appear to return nothing in the report).
Any suggestions on what could be the issue here? Thanks!
Here is the data template for the report:
<dataTemplate name="Report" description="Report" dataSourceRef="ReportDB">
<dataQuery>
<sqlStatement name="STORE_VENDOR">
<![CDATA[SELECT STORE.STORE_ID Q1_STORE_ID, VENDOR.VENDOR_ID Q1_VENDOR_ID, VENDOR.VENDOR_DESC Q1_VENDOR_DESC, PERSON.NAME Q1_NAME
               FROM STORE, SERVICE_TICKET, VENDOR, ROLE, ROLE_TYPE, PERSON, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET.SOURCE_ID = VENDOR.SOURCE_ID AND SERVICE_TICKET.VENDOR_ID = VENDOR.VENDOR_ID)
               AND (STORE.SOURCE_ID = ROLE.SOURCE_ID AND STORE.STORE_ID = ROLE.STORE_ID)
               AND (ROLE.SOURCE_ID = ROLE_TYPE.SOURCE_ID AND ROLE.ROLE_TYPE_ID = ROLE_TYPE.TYPE_ID AND ROLE_TYPE.TYPE_DESC = 'PIC')
               AND (ROLE.SOURCE_ID = PERSON.SOURCE_ID AND ROLE.PERSON_ID = PERSON.PERSON_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               GROUP BY STORE.STORE_ID, VENDOR.VENDOR_ID, VENDOR.VENDOR_DESC, PERSON.NAME
               ORDER BY STORE.STORE_ID]]>
</sqlStatement>
<sqlStatement name="WO">
<![CDATA[SELECT STORE.STORE_ID Q3_STORE_ID, 'Nightly Cleaning' Q3_NIGHTLY_CLEANING, 'Nightly Cleaning' Q3_DESCRIPTION, SERVICE_TICKET.TICKET_ID Q3_TICKET_ID, TO_CHAR(SERVICE_TICKET.END_DATE, 'MM/DD/YYYY') Q3_END_DATE, 'Excellent' Q3_QUALITY_RATING_1, 'Satisfactory' Q3_QUALITY_RATING_2, 'Unsatisfactory' Q3_QUALITY_RATING_3
               FROM SERVICE_TICKET, STORE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4']]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_1">
<![CDATA[SELECT STORE.STORE_ID Q4_STORE_ID, ZONE.ZONE_DESC Q4_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q4_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q4_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q4_WO_END_DATE, 'Excellent' Q4_QUALITY_RATING_1, 'Satisfactory' Q4_QUALITY_RATING_2, 'Unsatisfactory' Q4_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'ABC'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_2">
<![CDATA[SELECT STORE.STORE_ID Q5_STORE_ID, ZONE.ZONE_DESC Q5_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q5_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q5_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q5_WO_END_DATE, 'Excellent' Q5_QUALITY_RATING_1, 'Satisfactory' Q5_QUALITY_RATING_2, 'Unsatisfactory' Q5_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'XYZ'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_3">
<![CDATA[SELECT STORE.STORE_ID Q6_STORE_ID, ZONE.ZONE_DESC Q6_ZONE_DESC, 'Excellent' Q6_QUALITY_RATING_1, 'Satisfactory' Q6_QUALITY_RATING_2, 'Unsatisfactory' Q6_QUALITY_RATING_3, 'One' Q6_QTY_MISSING_1, 'Two' Q6_QTY_MISSING_2, '3 or More' Q6_QTY_MISSING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'PQR'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TYPE.TYPE_ID]]>
</sqlStatement>
</dataQuery>
<dataStructure>
     <group name="G_STORE_VENDOR" source="STORE_VENDOR">
          <element name="Q1_STORE_ID" value="Q1_STORE_ID"/>
          <element name="Q1_VENDOR_ID" value="Q1_VENDOR_ID"/>
          <element name="Q1_VENDOR_DESC" value="Q1_VENDOR_DESC"/>
          <element name="Q1_NAME" value="Q1_NAME"/>
     </group>
     <group name="G_WO" source="WO">
          <element name="Q3_NIGHTLY_CLEANING" value="Q3_NIGHTLY_CLEANING"/>
          <element name="Q3_DESCRIPTION" value="Q3_DESCRIPTION"/>
          <element name="Q3_TICKET_ID" value="Q3_TICKET_ID"/>
          <element name="Q3_END_DATE" value="Q3_END_DATE"/>
          <element name="Q3_QUALITY_RATING_1" value="Q3_QUALITY_RATING_1"/>
          <element name="Q3_QUALITY_RATING_2" value="Q3_QUALITY_RATING_2"/>
          <element name="Q3_QUALITY_RATING_3" value="Q3_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_1" source="SERVC_TYPE_1">
          <element name="Q4_ZONE_DESC" value="Q4_ZONE_DESC"/>
          <element name="Q4_SERVICE_COST" value="Q4_SERVICE_COST"/>
          <element name="Q4_TICKET_ID" value="Q4_TICKET_ID"/>
          <element name="Q4_WO_END_DATE" value="Q4_WO_END_DATE"/>
          <element name="Q4_QUALITY_RATING_1" value="Q4_QUALITY_RATING_1"/>
          <element name="Q4_QUALITY_RATING_2" value="Q4_QUALITY_RATING_2"/>
          <element name="Q4_QUALITY_RATING_3" value="Q4_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_2" source="SERVC_TYPE_2">
          <element name="Q5_ZONE_DESC" value="Q5_ZONE_DESC"/>
          <element name="Q5_SERVICE_COST" value="Q5_SERVICE_COST"/>
          <element name="Q5_TICKET_ID" value="Q5_TICKET_ID"/>
          <element name="Q5_WO_END_DATE" value="Q5_WO_END_DATE"/>
          <element name="Q5_QUALITY_RATING_1" value="Q5_QUALITY_RATING_1"/>
          <element name="Q5_QUALITY_RATING_2" value="Q5_QUALITY_RATING_2"/>
          <element name="Q5_QUALITY_RATING_3" value="Q5_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_3" source="SERVC_TYPE_3">
          <element name="Q6_ZONE_DESC" value="Q6_ZONE_DESC"/>
          <element name="Q6_QUALITY_RATING_1" value="Q6_QUALITY_RATING_1"/>
          <element name="Q6_QUALITY_RATING_2" value="Q6_QUALITY_RATING_2"/>
          <element name="Q6_QUALITY_RATING_3" value="Q6_QUALITY_RATING_3"/>
          <element name="Q6_QTY_MISSING_1" value="Q6_QTY_MISSING_1"/>
          <element name="Q6_QTY_MISSING_2" value="Q6_QTY_MISSING_2"/>
          <element name="Q6_QTY_MISSING_3" value="Q6_QTY_MISSING_3"/>
     </group>
</dataStructure>
</dataTemplate>

Hello user6428199,
When you use ":Q1_STORE_ID" in your queries, BI Publisher looks for a report parameter named Q1_STORE_ID. Change all your report queries to get data for all the store_id's available. As you are bursting the report using the store_id as the bursting key, BI Publisher will split the report based on the stored_id and delivers content based on it. No matter how many queries you may have, BI Publisher will loop through all the store_id's available and all the queries will return data for that particular id in a report.
Thanks,
Machaan

Hierarchy on HANA Calculation View with Optional Input Parameters Fails

Hi,
Has anyone succeeded in building a hierarchy on top of a calculation view with optional input parameters, where an input parameter is not filled?
The original requirement came from the wish to create a parent child hierarchy on a calculation view that was copied into the customer space from a HANA Live Financial Statement query view, but I have found the following when creating a simple level hierarchy on a calculation view that consumes one table. The Calculation View has one Input Parameter where the 'mandatory' box is unchecked.
Calculation view reads ECC table FAGLFLEXT
Simple level based hierarchy on fields PRCTR, RACCT and SEGMENT
Input parameter is used as a filter for PRCTR with logic ("EMPTY" = '$$P_PROFITCTR$$' or "PRCTR" = '$$P_PROFITCTR$$')
When I run the view I see the following behaviour in HANA Studio and Analysis for Excel
Before building the hierarchy I could run the view with or without the Input Parameter
After building the hierarchy I can run the view with the Input Parameter filled, but it fails when the Input Parameter is not filled.
Error message is "error: search table error: [2426] missing placeholder; missing value for mandatory parameter P_PROFITCTR"
P_PROFITCTR is not a mandatory parameter, but the selection for the hierarchy view thinks it should be. I don't find any notes around this issue, so I don't think it's version related, however the version I have used for this test is 1.00.70.
It's a shame we can't currently build the hierarchy as the parent child relationship is provided in HANA Live view NewGLFinancialStatementQuery.
Thanks,
Ken

Hi Ken,
We have been facing similar issue. We have even tried to set default value and as optional parameter. View still fails to create hierarchy (we are not using HANA live). As mentioned on page 97 of HANA modelling guide input parameter is mandatory from engine point of view. Hierarchy is generated as column view during the initial activation of calculation view and therefore expect a value by caller.
This seems to be a product error. Some one from HANA development team should explain this issue in detail. I would expect someone like Thomas Jung reply to us.
At the moment, we cant use input parameter for date prompt which gives us calendar popup feature for date selection. Hierarchies just don't work with input parameter. We are missing something.
Regards
Angad

Error when using Analytic view with Input Parameters

Hi,
I am trying to create an info space based on my Analytic view which has input parameters. The infospace is validated and indexed without any issue. However when I ran the view, I get an error (50011) as it is unable to fetch any results. I tried using an infospace based on Calculation view with input parameters and the explorer view works without any issue.
Has anyone faced similar issues?
We are using HANA SP 6 rev 67 and BI 4.0 SP 4.
Also is there a way to enable input prompts for the users when they refresh the BO Explorer view? If not currently available is there any work around ?
Thanks

Hello George,
I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
Thanks,

Using calculation view in excel with input parameters

Hello
I have a calculation view which receives 2 input parameters for a range of dates, when i create the connecction with Excel i get the error "sql processing error: Hierarchy source query: SQL: column store error: search table error: [34092] search on calculation model requires parameters: Required variable $$MyVariable$$ is not set"
I would like to know how can i pass the parameteres from excel to my calculation view??
Thanks

I doubt this can be achieved with a native Excel connection. Try SAP Advanced Analysis for Office. (I believe it may now just be called Analysis for Office).

Bursting with Report's input parameters

Similar Messages

Maybe you are looking for