Error when using Analytic view with Input Parameters

Hi,
I am trying to create an info space based on my Analytic view which has input parameters. The infospace is validated and indexed without any issue. However when I ran the view, I get an error (50011) as it is unable to fetch any results. I tried using an infospace based on Calculation view with input parameters and the explorer view works without any issue.
Has anyone faced similar issues?
We are using HANA SP 6 rev 67 and BI 4.0 SP 4.
Also is there a way to enable input prompts for the users when they refresh the BO Explorer view? If not currently available is there any work around ?
Thanks

Hello George,
I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
Thanks,

Similar Messages

  • Error while using Analytic view with BO explorer

    Hi,
    I am trying to create an info space based on my Analytic view which has input parameters. The infospace is validated and indexed without any issue. However when I ran the view, I get an error (50011) as it is unable to fetch any results. I tried using an infospace based on Calculation view with input parameters and the explorer view works without any issue.
    Has anyone faced similar issues?
    We are using HANA SP 6 rev 67 and BI 4.0 SP 4.
    Also is there a way to enable input prompts for the users when they refresh the BO Explorer view? If not currently available is there any work around ?
    Thanks

    Hello George,
    I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
    Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
    Thanks,

  • Questions on CDS Views with input parameters

    Dear Experts,
    1. Can we call a CDS View (or generated database view) with input parameters inside an AMDP? I am looking for something similar to the feature in HANA where we can consume calculation view with filters inside SQL Script?
    2. I understand we can next CDS Views, but how we can next (call) a CDS View with input parameters inside another CDS View?
    Thanks,
    Giri

    Hi Thomas,
    I get the below error that the CDS View's generated table function cannot take field from AMDP.
    I have a requirement to query the CDS View using 2 timestamps (start & end). So, in AMDP I have used the TIME_STAMP and try to pass it to the CDS View
    View code:
    define view Z_Ngi_Cag_A
    with parameters start_ts:abap.dec( 15, 0 ) , end_ts:abap.dec( 15, 0 )
    as select from table {
    resource_key
    where
    (begtstmp > $parameters.start_ts or endtstmp > $parameters.start_ts )
    and
    (begtstmp < $parameters.end_ts or endtstmp < $parameters.end_ts )
    I am calling using the below AMDP:
    DECLARE iv_start_date TIMESTAMP;
    DECLARE iv_end_date TIMESTAMP;
    SELECT CURRENT_TIMESTAMP INTO iv_start_date from dummy;
    SELECT ADD_DAYS(CURRENT_TIMESTAMP, 30) INTO iv_end_date from dummy;
    et_data =      SELECT * FROM ZMR_H_CA ( start_ts => iv_start_date, end_ts =>  iv_end_date );
    What could be wrong ? Is this not supported?
    Thanks,
    Giri

  • Calculated view with input parameters

    Hello there.
    I've created a calculated view with input parameters, which I am going to call  it  'VIEW_A'.
    This view has been working just fine.
    But now I have to create another calculated view and import the last one(VIEW_A) in a projection.
    But I got a error when trying to see the data content. 
    It says :
    Error: SAP DBTech JDBC: [2048]: column store error: search table error:  [6968] Evaluator: syntax error in expression string;expected TK_ID,parsing '"DT_DOC_MES_ANO" >= [here]and "DT_DOC_MES_ANO" <='
    At the 'Problems' panel it says the all the input parameters are unmapped.
    What Am I doing wrong?  Sorry but I am kind new at SAP world.

    http://scn.sap.com/message/15489475Hello Tiago,
    Could you please let me know if you're able to resolve your issue, I'm getting the similar error when I'm passing alpha numeric values as parameter via my SP.
    Thanks for your help in advance!
    Regards,
    Sathish

  • Call a Graphical Calc view with input Parameters from a Script Based Calc View

    Hi All.
    I am trying to call a graphical calculation view with input parameters from a script based calculation view as below but getting syntax error:
    SESSION_SAMPLE = SELECT SESSION_CREATE_DATE,SHA256,CA_MEASURE
                                 FROM "_SYS_BIC"."WILDFIRE/CV_SESSION_SAMPLE"
                                 WITH PARAMETERS  ('PLACEHOLDER' = ('$$IP_START_DATE$$',:START_DATE),
                                     'PLACEHOLDER' = ('$$IP_END_DATE$$',:END_DATE));
    START_DATE  and END_DATE are input parameters of the script based calculation view.
    Can anyone please help me with the correct syntax for accomplishing this?
    Thanks,
    Goutham

    Hi Gautham,
    One more option  what i would like you to try is the below option , here i have just changed the order of passing nothing else.
    SESSION_SAMPLE = SELECT SESSION_CREATE_DATE,SHA256,CA_MEASURE
                                 FROM "_SYS_BIC"."WILDFIRE/CV_SESSION_SAMPLE"
                                   ('PLACEHOLDER' = ('$$IP_END_DATE$$','$$END_DATE$$'),
                                  'PLACEHOLDER' = ('$$IP_START_DATE$$','$$START_DATE$$'))
    Regards,
    Vinoth

  • Error while using a VIEW with a FILTER - 0x80131904

    Dear Colleagues,
    I've a list and I want to use a view with a filter on a specific field.
    [Attribution] is egal to [Me]
    My Sharepoint 2013 keeps providing this error when I open the view filtered :
    Exception from HRESULT: 0x80131904
    Correlation ID:fc8650d8-5f52-4ceb-b819-0f784ec0318f
    ULS shows the following :
    01/07/2014 17:44:58.41 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://vspar-spfw-01:80/Lists/Conduite%20Changement/Requtes%20Attribues%20%20Moi.aspx) 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.42 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.42 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Temps d’exécution=13,5726747393873 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Database d0d6 High System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Benjamin RIOU' to data type int. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.HasMoreRows() at System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordead... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48* w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Database d0d6 High ...lock) 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation General xxpm High Unable to execute query: Error 0x80131904 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation General 8e2s Medium Unknown SPRequest error occurred. More information: 0x80131904 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Temps d’exécution=12,6535635115636 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a1 High Error while executing web part: Microsoft.SharePoint.SPException: Exception from HRESULT: 0x80131904 ---> System.Runtime.InteropServices.COMException (0x80131904): Exception from HRESULT: 0x80131904 at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListNa... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48* w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a1 High ...me, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) --- End of inner exception stack trace --- at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCal... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48* w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a1 High ...lback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) at Microsoft.SharePoint.SPListItemCollection.EnsureListItemsData() at Microsoft.SharePoint.SPListItemCollection.get_Count() at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteSelect(DataSourceSelectArguments selectArguments, String aggregateString, Boolean wantReturn, BaseXsltListWebPart webpart, SPListItem& listItem, SPListItemCollection& listItems, String[]& fieldList) at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal() at Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a2 High InnerException 1: System.Runtime.InteropServices.COMException (0x80131904): Exception from HRESULT: 0x80131904 at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeAr... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.48* w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Web Parts 89a2 High ...rayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    01/07/2014 17:44:58.50 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://vspar-spfw-01:80/Lists/Conduite%20Changement/Requtes%20Attribues%20%20Moi.aspx)). Temps d’exécution=95,5520883240747 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    The filtered field is a list of choices with no multiples values.
    I'm pretty sure the issue is located here :
    01/07/2014 17:44:58.48 w3wp.exe (0x21C0) 0x2AF4 SharePoint Foundation Database d0d6 High System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Benjamin RIOU' to data type int. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.HasMoreRows() at System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordead... 3d46579c-63c3-4dc9-bb9a-e7155e8da45a
    What can I do ?
    Thanks
    Best regards  / Ben

    Hi Ben,
    How did you design the filter on the view?
     This error usually occurred when people use SQL T-SQL. Here are two similar posts , please check whether they are useful for you:
    http://social.technet.microsoft.com/Forums/en-US/e1ba76f9-855f-4087-91a7-c3e492e59be4/conversion-failed-when-converting-the-nvarchar-value-xxxxxx-to-data-type-int?forum=transactsql
    http://social.technet.microsoft.com/Forums/en-US/1d0ab5f9-2ea6-4399-abbf-0c23b456e0f4/conversion-failed-when-converting-the-nvarchar-value-bottle-to-data-type-int?forum=transactsql
    Please create a new list, and create a new view, then add a filter on the view, compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Error while creating a BO Universe (using IDT) on top of SAP HANA Calculation View with Input Parameters

    Hi All..
          We are trying to create a Universe (using IDT-Version4.0) on top of the HANA Calculation view. The Calculation view has 4 input parameters, So
    in Universe side we have created the respective prompts. For the creation of derived table we have used the following code
    SELECT *
    FROM "_SYS_BIC"."<schema_name>.<CV_Calculation_View_test>"
    'PLACEHOLDER'=('$$IP_A$$','@Prompt(A)'),
    'PLACEHOLDER'=('$$IP_B$$','@Prompt(B)'),
    'PLACEHOLDER'=('$$IP_C$$','@Prompt(C)'),
    'PLACEHOLDER'=('$$IP_D$$','@Prompt(D)')
    While validating the above code we are getting an error.
    I have attached the snapshot of that error for your reference. Please find the attachment and help me in resolving it.
    Thanks in advance.

    Hello George,
    I don't have any personalization set on the info space. Also I am using mapped Account in BI to connect to HANA. The confusing part is that it is able to validate the infospace with the input parameters and index it. However query does not return any results. I even tried running the same query which explorer sends to HANA in the SQL editor and there too the same results,the query does not return anything. The model does return data when I do a data preview and if accessed from other tools like AAO.
    Also when I use SSO connection to HANA, indexing of the infospace fails. Where can I see the error log?
    Thanks,

  • Error when activate analytic view (join tables)-Exception during activation

    Dear guru,
    I suffered an error showed "Exception during activation" when activate a newly created analytic view.
    I used two tables, one is NASDAQDAILY, one is NYSEDAILY.
    Private attribute are "DATE, STOCK(NYSE.STOCK), STOCK_1(NASDAQ.STOCK"
    Measure are "PRICEOPEN(NYSE), PRICEOPEN_1(NASDAQ)"
    JOINS are: Left Table-NASDAQ, Left Column-DATE
    Right Table-NYSE, Right Column-DATE
    Validate is sucessfully.
    But when "Save and Activate", it gave below error.
    Kindly help me on this. Thank you so much.
    com.sap.ndb.studio.sdk.resource.deployment.bi.DeploymentException: Error during deployment
    _     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeElement.processMeasures(CubeElement.java:591)_
    _     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeElement.initialize(CubeElement.java:170)_
    _     at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeSchemaRoot.initialize(CubeSchemaRoot.java:80)_
    _     at com.sap.ndb.studio.sdk.resource.deployment.bi.DeploymentExecutor.initialize(DeploymentExecutor.java:159)_
    _     at com.sap.ndb.studio.sdk.resource.deployment.bi.CubeDimensionDeploymentExecutor.initialize(CubeDimensionDeploymentExecutor.java:78)_
    _     at com.sap.ndb.studio.sdk.resource.bi.core.impl.BiResourceImpl.activateObjects(BiResourceImpl.java:236)_
    _     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceImpl.activateObjects(ResourceImpl.java:868)_
    _     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceImpl.activate(ResourceImpl.java:727)_
    _     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceManager.activateAll(ResourceManager.java:166)_
    _     at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceManager.activateAll(ResourceManager.java:202)_
    _     at com.sap.ndb.studio.modeler.job.type.activate.ActivateJob.activateObjects(ActivateJob.java:92)_
    _     at com.sap.ndb.studio.modeler.job.type.activate.ActivateJob.run(ActivateJob.java:71)_
    _     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)_

    Hello,
    This issue is resolved now.
    The problem was with the file system space on the Unix server(on which portal is installed).
    The server administrators and the Basis team extended the disk space and issue got resolved.
    Thanks for all your inputs.
    Sonali.

  • Calculation view with input parameters

    Hello there.
    I got a calculation with that expects 2 input parameters.
    But now I have to created another calculation view that import this calculation view.
    How can I pass these 2 parameters using sqlscript?
      My script so far
      cv1 = CE_CALC_VIEW("_SYS_BIC"."calc_1",["CR"],'"COMPANY"=''7000''');
    I must pass 2 parameters in this  "_SYS_BIC"."calc_1" table

    Hi Tiago,
    as I am aware, you cannot pass input parameters to CE function.
    You can try using regular SQL syntax:
    SELECT "CR" FROM "_SYS_BIC"."calc_1"
    WHERE "COMPANY" = 7000
    (PLACEHOLDER."$$PARAM_1$$" => VALUE_1,
    PLACEHOLDER."$$PARAM_2$$" => VALUE_2)

  • Error when displaying analytical view

    Hi,
    I own a cloudshare account. i created attribute views and when i want to display, it worked. but when i created the analytic view and look for "open content" option, its missing. then i gave the sql command "Grant select on schema SYSTEM to _SYS_REPO with grant option". then also it didn't work. please help. the relevant screen shot is attached.
    Thanks,
    Murali.

    Hi,
    Try 'grant select on schema sap.murali to _SYS_REPO with grant option'.
    Regards,
    Michael Devine

  • -t2cGetCharSet error when using thick client with 1.0.0.15.57

    I think I have found a bug in 1.0.0.15 related to accessing a database using the thick client. I have tested this with 1.0.0.14 release of SQLDeveloper and that version DOES work OK.
    Simply put, I try connecting to a database using the 10g Client on Windows XP and I get "Failure: -t2cGetCharSet" error when running 1.0.0.15.57. I must use 10g thick client so that I can use encyption between the client and the database. 9i thick client doesn't work between Windows and Linux when using encryption. Also, instant client isn't an option; it doesn't support Advanced Security Option (encryption).
    I DID test without encryption enabled to eliminate that as a possible cause and the results were the same.
    If need be, I could back down to 1.0.0.14, but I would prefer not to.

    See:
    Re: TNS Connection Issues
    Raptor does not find My tnsnames
    If don't to solve your problem, let us to know.

  • Error when using Table view

    Hi Folks,
    I m getting this problem frequently when i m using table view in reports. Im using SQl server2008 and working on BIApps.
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 28000 code: 18456 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'DWH'.. (HY000)
    SQL Issued: SELECT 0 s_0, "Financials - AP Overview"."Time"."Fiscal Quarter" s_1, "Financials - AP Overview"."Time"."Fiscal Year" s_2, "Financials - AP Overview"."Facts - AP Turnover"."Days Payables Outstanding" s_3 FROM "Financials - AP Overview" FETCH FIRST 65001 ROWS ONLY
    Thanks in advance.
    Raghava.

    Hi,
    As per you query shown above, I am assuming that the query limit exceeds the maximum number of rows to show in your result. because it showing only 65001 rows fetched but your data may be more than that.
    So try to extend the maximum rows for table view in instanceconfig.xml file.
    Regards,
    Pandian

  • Unknown namespace prefix Error - when using custom Aliases with RDF aliases

    I am getting unknown namespace prefix error when I use custome SEM_ALIAS with rdf SEM_ALIAS. It seems once you specify custom SEM_ALIAS, the default rdf alias is not recognized. Following are the details of queries
    I have a sem_Model "test" which has "event" as a class and "Merger" as a sub-class of event, with "acquiringorg" as a property having the domain "org". "Org" is also defined as a class with the literal attribute "hasname". I have added one instance of "merger" class with appropriate values for "acquiringorg" property. There is one instance or "Org" as well for reference in the instance above.
    the following query(return all objects having property "acquiringorg" and its .e. "hasName" attribute for the object) runs fine and returns appropriate resultset
    select x event,z acquiringorg ,l acquireeorg from table(SEM_MATCH(
    '(?x Evnt:AcquiringOrg ?y)(?k orgn:hasName ?l)',
    SEM_MODELS('test'),
    null,
    SEM_ALIASES(SEM_ALIAS('Evnt','http://www.abc.com/Event/Merger/'),
    SEM_ALIAS('orgn','http://www.abc.com/Org/')),
    null));
    However when I want to add another criteria i.e. show me events of type merger(?x rdf:type :Merger) , the query fails with the "unknown namespace prefix error" as above
    select x event,z acquiringorg ,l acquireeorg from table(SEM_MATCH(
    '(?x rdf:type :Merger)(?x Evnt:AcquiringOrg ?y)(?k orgn:hasName ?l)',
    SEM_MODELS('test'),
    null,
    SEM_ALIASES(SEM_ALIAS('Evnt','http://www.abc.com/Event/Merger/'),
    SEM_ALIAS('orgn','http://www.abc.com/Org/')),
    null));
    specifying "rdf" ALIAS explicitly also does not work
    select x event,z acquiringorg ,l acquireeorg from table(SEM_MATCH(
    '(?x rdf:type :Merger)(?x Evnt:AcquiringOrg ?y)(?k orgn:hasName ?l)',
    SEM_MODELS('test'),
    null,
    SEM_ALIASES(_SEM_ALIAS('rdf', 'http://www.w3.org/1999/02/22-rdf-syntax-ns#'),_
    SEM_ALIAS('Evnt','http://www.abc.com/Event/Merger/'),
    SEM_ALIAS('orgn','http://www.abc.com/Org/')),
    null));
    I am unable to figure out why default namespace i.e. rdf is returning this error
    Stuck at this point badly!!Any pointers would be useful!!

    Full error details are as below
    ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.ParseException: Unknown namespace prefix ''
    ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 153
    ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 842
    ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 235
    ORA-06512: at line 1
    29532. 00000 - "Java call terminated by uncaught Java exception: %s"
    *Cause:    A Java exception or error was signaled and could not be
    resolved by the Java code.
    *Action:   Modify Java code, if this behavior is not intended.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Error when using Smart View install link in Workspace

    Hi All,
    We recently decidely to use Smart View 11.1.2.5, instead of 11.1.2.1.
    In order to role out the file to our users we need to update the link in Workspace.  I did so, copying the new .exe and version.xml file to our server that houses workspace, in file path Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/SmartView.  I then removed the old files.  Now when I login to HFM and go to the link, after a period of a few minutes I get the error "unable to find a version of the runtime to run this application."
    I tried restarting all services, a dead end.
    Does anyone know what needs to be done to fix this error?
    Thank you in advance.
    Brian

    Yes, this is frustrating. You need .NET Framework 4.5 installed to be able to download and install from Internet Explorer. As per usual Firefox does not suffer from this and allows you to download the installer and save locally, no bother.
    Please mark if helpful,
    Andy.

  • Error when using MySQL view that has name greater than 30 characters

    Hi, am loading MySQL data to an Oracle table using an ODI 11g Interface.
    The interface errors when the name of the MySQL view exceeds 30 characters. A "view not found" error is encountered.
    Is there any work around when using source datastores (MySQL views in this case) where the datastore name exceeds 30 characters, other than renaming the MySQL view to have a max 30 character name?
    Thanks,
    Kevin L.

    I believe that mySQL supports upto 64 characters in table name. You need to update the ODI 11g Topology -> Physical Architecture -> Dbl click MySQL -> Goto Advanced tab and update the "Maximum table name length". By default that is setup to 30.

Maybe you are looking for