BUS2013 doesn't triggered for event RELEASED OR RELEASSTEPSREATED

Hello All
1.  I have created workflow for BO BU2013 - event RELEASED
2. When I test this workflow form PTFC or SWEU it works perfect and,
   after testing by SWEU, I see traces in SWEL as properly triggered and worked workflow,
3. When I really release any "purchase scheduling agreement"  using ME35L there isn't any triggered process
   in  SWEL for BUS2013, but  there is process related for BUS2014 for object of "purchase scheduling agreement"
   that I released and this process is with error of course.
Please, advice,
regards,
Daniel.

Hi,
I guess you are using "Document category" "K"( it should be "L") in transaction ME35L..
So the documents you are releasing are realted to BO BUS2014...
Either your documents are wrong or your workflow design requires change...
Regards
Gautam

Similar Messages

  • Object : DRAW  Event : Released

    Hi All,
         In one of my workflows I am trying to put wait for event RELEASED of BO : DRAW . When I check in SWO1 there is no event called RELEASED. Since I there is no event in SWO1 I can`t put the wait event. But when I release a document through CV02N, I can see (through SWEL) an event Released being raised. What am I missing ? Please help.
    And also. there is no subtype for DRAW in system, so delegation possibilty is not there.
    Thanks,
    Anuj Sethi
    Edited by: Anuj Sethi on May 21, 2008 1:29 PM

    In SWUE its not there. And I have found out one thing. in SWEC one can maintain the event even if its not there( instead of using F4 one can key in the event and the system accepts it with a warning message, We are on ECC 6.0 . ) . thats something strange because it hold no validity or use (to my knowledge). I will try creating a custom event and using change doc for that, Will keep you guys posted. in the mean time please let me know if something strikes to you !!
    Thanks
    Anuj Sethi

  • Enter event not triggering for read-only checkbox

    I have some objects in a form that get "locked" when the user signs the form.  I'm not using the digital signatures.  Instead, when the user types their name into the signature text field, a script runs on the change event that makes all of the fields in the form read only.  It also unlocks the fields if the signature is deleted.
    I was worried that we would get a lot of phone calls with users that didn't understand that the form had locked ("Why doesn't this form work?!"), so I added some code to the enter event for all of the fields that would pop up a messagebox to explain to people trying to edit a signed form that the form was locked and that they would need to delete the signature to edit the form.
    This plan works perfect for my text fields and decimal fields.  It does NOT work at all for my checkboxes.  For some reason, the enter event is never triggered for read-only checkboxes.  I don't see any other events that would obviously work for me though.  Any ideas?
    Thanks

    Thanks, those are reasonable suggestions.
    In the first suggestion, I'm unclear about one aspect of how I would accomplish this.  I assume I would allow people to modify fields in the form, but that when they did, a msgbox would pop up that would inform them that, if they continued with this modification to a signed form, the signature would be removed.  I'm all good to that point.  But if they answered that they do not want to continue modifying that field and removing the signature, how can I code it to set the value back to what it was before the change?  Is there some method that will give me access to the value of the field BEFORE the attempted modification?  I went looking for something like $.previousvalue, but found nothing.
    I'd suggest that I could use a two-stage solution, in which I store the previous value on the enter event, and save it just in case they do not want to change the field when prompted by the msgbox, but since the enter event does not exist for checkboxes (my original problem), that seems like it won't work.
    As far as radio button suggestion, I like radio buttons very much except for one fatal flaw: they aren't (as far as I can tell) clearable.  That is a shame.  Clearly some people (like me) want both exclusivity AND clearability.  And we'd like the controls to have an enter event.  But I know I'm demanding   Anyway, as it is, I just end up having to use checkboxes and create a boatload of silly code to make them exclusive.
    Emily

  • PO Release Strategy not triggerred for particular Total Net Order Value

    Dear,
    I am currently facing the issue where release strategy for purchase orders is not getting triggered for a particular value or lower.
    For order value 1 INR or less, no release strategy is triggered for new created PO. And for value > 1 INR release strategy is getting triggered.
    All otehr PO characterstics are the same, I mean to say the values for other characterstics such as plant material group are identical.
    But the characterstics for release for Total net order value are <= 30000 INR. There are two system copies, where in one system the same release strategy is working as expected. But in other system the above mentioned issue occurs. There is no differnce which I can see in the release strategy setup.
    Please suggest for solution.
    Thank you.
    Warm Regards.

    Dear All,
    While looking further into the issue by going into debugging mode, we have found that in include LCLSCF2I, Internal table p_selection_criteria_tab , the value for ATFLV (Internal Floating point from) gets different values in the two systems. For example, in the affected system, for PO with 1INR tottal value, for one of the Total value chaaracterstics before INR characterstic, ATFLV value is 0,0000000000000000E+00, hence it gets out of loop and doesn't trigger release strategy.
    But in another system for same PO values and release setup, ATFLV value is 1,0000000000000000E+00 for that characterstic.
    May I know how the value for this field gets calculated.
    Thank you.
    Warm Regards.

  • Error in event receiver in workflow for PO release strategy

    Hi Expert,
    I am trying to trigger an email through workflow for PO release. I have setup following
    In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
    In PFTC, under Triggering events, Object type BUS2012 is green light
    When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
    Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.

    laurarice wrote:
    Hi Expert,
    >
    > I am trying to trigger an email through workflow for PO release. I have setup following
    >
    > In SWETYPV,I have check marked on Type linkage active and Enable event queue. Status no error.
    > In PFTC, under Triggering events, Object type BUS2012 is green light
    > When i create the PO in my SAP inbox, i get notification, however, i getting this error u201CERROR IN EVENT RECEIVER".
    > Also, how can i send the notification to the user's outlook inbox? Your help will be appreciated.
    I suppose, you are using the workflow WS20000075. Add sending email as an additional task to the same workflow in SWDD.

  • Job not getting triggered for Multiple Scheduler Events

    hi,
    I would like a job to be triggered for multiple scheduler events, subscribing to a single event works fine. But, when I set multiple event condition, nothing works.
    My objective is to run a job, whenever job starts or restarts or exceeds max run duration.
    Note : Is it possible to trigger a job, when a job RESTARTS by subscribing to JOB_START ????????
    procedure sniffer_proc(p_message in sys.scheduler$_event_info)
    is
    --Code
    end sniffer_proc
    dbms_scheduler.create_program(program_name => 'PROG',
    program_action => 'sniffer_proc',
    program_type => 'stored_procedure',
    number_of_arguments => 1,
    enabled => false);
    -- Define the meta data on scheduler event to be passed.
    dbms_scheduler.define_metadata_argument('PROG',
    'event_message',1);
    dbms_scheduler.enable('PROG');
    dbms_scheduler.create_job
    ('JOB',
    program_name => 'PROG',
    * event_condition => 'tab.user_data.event_type = ''JOB_OVER_MAX_DUR''' ||*
    *' or tab.user_data.event_type = ''JOB_START''',*
    queue_spec => 'sys.scheduler$_event_queue,auagent',
    enabled => true);
    I tried this too...
    dbms_scheduler.create_job
    ('JOB',
    program_name => 'PROG',
    * event_condition => 'tab.user_data.event_type = ''JOB_OVER_MAX_DUR''' ||*
    *' and tab.user_data.event_type = ''JOB_START''',*
    queue_spec => 'sys.scheduler$_event_queue,auagent',
    enabled => true);
    Need help
    Thanks...
    Edited by: user602200 on Dec 28, 2009 3:00 AM
    Edited by: user602200 on Dec 28, 2009 3:03 AM

    Hi,
    Here is complete code which I tested on 10.2.0.4 which shows a second job that runs after a first job starts and also when it has exceeded its max run duration. It doesn't have the condition but just runs on every event raised, but the job only raises the 2 events.
    Hope this helps,
    Ravi.
    -- run a job when another starts and exceeds its max_run_duration
    set pagesize 200
    -- create a user just for this test
    drop user test_user cascade;
    grant connect, create job, create session, resource,
      create table to test_user identified by test_user ;
    connect test_user/test_user
    -- create a table for output
    create table job_output (log_date timestamp with time zone,
            output varchar2(4000));
    -- add an event queue subscriber for this user's messages
    exec dbms_scheduler.add_event_queue_subscriber('myagent')
    -- create the first job and have it raise an event whenever it completes
    -- (succeeds, fails or stops)
    begin
    dbms_scheduler.create_job
       ( 'first_job', job_action =>
         'insert into job_output values(systimestamp, ''first job runs'');'||
         'commit; dbms_lock.sleep(70);',
        job_type => 'plsql_block',
        enabled => false, repeat_interval=>'freq=secondly;interval=90' ) ;
    dbms_scheduler.set_attribute ( 'first_job' , 'max_runs' , 2);
    dbms_scheduler.set_attribute
        ( 'first_job' , 'raise_events' , dbms_scheduler.job_started);
    dbms_scheduler.set_attribute ( 'first_job' , 'max_run_duration' ,
        interval '60' second);
    end;
    -- create a simple second job that runs when the first starts and after
    -- it has exceeded its max_run_duration
    begin
      dbms_scheduler.create_job('second_job',
                                job_type=>'plsql_block',
                                job_action=>
        'insert into job_output values(systimestamp, ''second job runs'');',
                                event_condition =>
       'tab.user_data.object_name = ''FIRST_JOB''',
                                queue_spec =>'sys.scheduler$_event_queue,myagent',
                                enabled=>true);
    end;
    -- this allows multiple simultaneous runs of the second job on 11g and up
    begin
      $IF DBMS_DB_VERSION.VER_LE_10 $THEN
        null;
      $ELSE
        dbms_scheduler.set_attribute('second_job', 'parallel_instances',true);
      $END
    end;
    -- enable the first job so it starts running
    exec dbms_scheduler.enable('first_job')
    -- wait until the first job has run twice
    exec dbms_lock.sleep(180)
    select * from job_output;

  • Event trigger for PO release and cancel

    Dear Experts,
    In tcode ME29N i have created a PO and i have defined 3 approver levels for it. I have turned event trace on and checked what events are triggered when i click release button. In SWEL i can see 4 entries - 1) RELEASE STEP CREATED 2) RELEASED
    3) CHANGED EVENTS (first  three events from BUS2012 ) and 4) CHANGED EVENT from FREBUS2012. Now i tried with cancelling PO release at a level. Now in case of cancelling release which i do by clicking the same release button i see 4 entries in SWEL
    1) RELEASE STEP CREATED 2) SIGNIFICANTLY CHANGED 3) CHANGED (first three events from BUS2012) 4) CHANGED EVENT from FREBUS2012.
    I want to trigger my workflow in case of PO release as well as PO cancellation. What should be my workflow's start event. Please help me in this regard.
    Kind Regards,
    S Bharath

    hi
    Are u using std WS20000075? you can refer that .
    there in TS20000166 : terminating event
    you can see  event RELEASED : Purchase Order Release
    SIGNIFICANTLYCHANGED :  when cancled.
    if you want to do seperate steps , in some zWF ,then I think you may create 2 diff wf , with the diff start event .
    let me know if it is helpfuly or any query
    thanks
    kakoli

  • Event not triggering for SWEC entry (MM_SERVICE) on create

    Hi All,
    I have been trying to trigger a customised event for BUS2009 based on creation of the Change Object MM_SERVICE.  I have created an entry in SWEC as follows:
    - Change Doc Object: MM_SERVICE
    - Object Cat : BOR
    - Object Type: BUS2009
    - Event: RELEASEDREQCHANGED
    - On Create
    (no field conditions)
    However, the event does not seem to publish upon an insert of ESUH-SUMLIMIT (Overall Limit on the Purchase Req - a field in Change Object MM_SERVICE), as I am not seeing the event in SWEL.  Please note I have also tried to do this with field conditions in SWEC, but to no avail. 
    Alternatively, I have tried to setting the Change Doc config via SWU_EWCD, however, it comes back with an error message saying "No change document object for business object type BUS2009" - I believe this might have to do with the incompatibility of the key structures between MM_SERVICE and BUS2009.  We have written a function module to overcome this problem and placed same in SWEC, which is why the (BUS2009) event is currently publishing for "on change" of MM_SERVICE - is there any way around this?
    On the other hand, the event will publish OK if the SWEC entry is amended to "ON CHANGE" (with field conditions) - upon changing the value of ESUH-SUMLIMIT, not insert/create.
    Would anyone be able to kindly advise how I can get the event to publish upon "ON CREATE" as well?
    Thanks in advance.
    ~Andy.

    Thanks for your prompt response Surjith.
    However, I believe the above setup in SWEC is already configured for the purpose of triggering the event.  The customised event in BUS2009 (RELEASEDREQCHANGED) is linked to the Change Document Object MM_SERVICE via "on create" in SWEC - it's just that there are no events coming up in SWEL
    I have exactly the same config setup for RELEASEDREQCHANGED, MM_SERVICE via "on change" - and this is working perfectly fine (ie. I can see the event in SWEL whenever there is a change in any of the restricted fields of MM_SERVICE).
    My understanding is that upon "on create" (in SWEC), it is not necessary to set up field restrictions in order to publish the event.  In any case, I have tried to trigger the event both with and without any field restrictions, none of which came up with any event when a field in MM_SERVICE has been inserted.  This is the reason why I tried SWU_EWCD instead, however, due to the incompatibility in the key structure between BUS2009 and MM_SERVICE, the transaction did not allow me to complete the setup.
    Is there any way around this?
    Many thanks.
    ~ Andy

  • Event not getting triggered for PR generated through MRP run

    Hi All,
    Could anyone let me know how to get a workflow triggered for the ReleaseStepCreated event (obj - bus2105) when the PR is created through MRP run. The MD02 control paramters have the value '1'.
    Interstingly the workflow triggers when the value is set to '2' or '3'.
    Thanks,
    Ameekar

    Thanks Aman,
    I checked field restrictions but there are none there. Actually i checked them for other object 'AOOMARA' which is being thrown as an exception when i am creating the PR through MRP run.
    Exception says -> field not maintained.
    So i guess, i need to maintain the field for Change Document but i am not sure how. COuld you please aid me with that.
    Thanks A lot !!

  • Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

    Hi All
    I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Exception occurred - Error when starting work item 000000007031
    PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
    CREATE_WIM_HANDLE - Error when creating a work item
    CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
    Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
    Points to be noted:
    1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
    2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
    Appreciate your valuable suggestions.
    Thanks
    Ragav

    Hi Ragav
    did you try to debug this? maybe something is missing in config of P&F?
    Since you are on 605, the following note would be there in your system....use it to debug:
    1422496 - Debugging background workflow tasks in HCM P&F
    This will help you find the root cause.
    regards,
    modak

  • Event CREATED is not triggered for objects of type USER

    Dear all,
    I'm currently configuring a workflow, which should be started when new user account is created. I took event CREATE for object type USER as a start event, but the workflow does not start, when I create new user account via transaction code SU01. If I test workflow in SWUS, everything works fine. I checked the event trace, but it shows no records for events triggered when I use SU01 and create a user.
    Could you please advise how I can activate triggering of this event without using ABAP-developed event trigger?
    Thank you in advance.

    but here the requirement is to trigger workflow after the user account is created in the system.
    One more way to trigger a workflow is by the messages output. I mean when a user account is created successfully then a message will displayed on the screen let say User ABC created Successfully right so, when ever this message is raised then you can start the workflow by using this message. this can be done by using the txn SWUY
    1. Open SWUY txn.
    2. Click on Continue  and in the next screen give the area as the message class name from which the message is getting triggered and its number in the field Message and click on continue.
    3. Then it will open the PFTC txn mention the description and click on the workflow builder button and design the workflow as per you requirement.
    and once this is done , so when ever the message from the above mentioned message class is raised at that time your workflow will also be started.
    In this way I hope you can reduce your development time , searching for the right BADI or User exit and implementing the code and testing..
    Here in the above txn all you have to make sure that from which message class the message is getting displayed once the user is created successfully, I suggest you a way is you create a dummy user and once the dummy user is created succeffully system will display the message right?, so just double click on the message at the bottom of the screen this will let you knwo what is the message class and number it is using. and once you know tyr to approach the above steps....

  • I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow , will there be an updated or this soon?

    I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event  , will there be an updated or this soon? Or should I just shift back to samsung?????

    Go to settings/notification centre and make sure today vie and calendar day view are both on

  • Action event automatically triggered for combo box

    Hi all,
    I am facing a typical event handling problem for combo box in Swing(Using Net Beans 5.0, jdk 1.4.2)
    While adding items to combo box it is firing action event twice instead of once irrespective of no. of items added to it.
    For eg if there are 1 or more than 1 item added to combo box it is triggerring action event twice(one just after when first item is added and one again when rest all items are added)
    and if there is no item then also it is triggering once.
    Can you please help me out.
    Thanks

    post the SSCCE code, then only it is easy to find the problem

  • Release strategy not triggering for Specif plant

    Hi Friends
    I configured a release strategy with three charecteristics. P.org, Plant, Net value.
    this stretegy is triggering for specific plants which are under a particular company code, and if I change to my plant and P.org. its not triggering.
    I have deleted all the classifications and release strategies from, no other data in VV_T16FS_2 , AUSP,T16FV,and T16FS tables except this release strategies data.
    do we have any settings at cocode level??????
    please respond if answer known
    Points would be awarded for for your valuable answer.

    Thank you deepak for your quick respond
    Actually There were already release strategies  with same charecteristics, and with the values of other plants and other P.orgs which are under certain companycode.
    these were triggering perfectly for PO
    Now created new strategy for plant and P.org under different plant code of different cocde. this strategy not triggering for PO.
    but if the release strtegy  values replaced by the erlier plants and P.org  again its triggering.
    Now I created new chars, class, and stategies still same problem persists.
    Release stategy working for the values of a prticular company code plants, Porgs.
    and already tried your suggestion Cocode as char. but same its working for only that company code not for my companycode

  • [svn:osmf:] 17497: Fix FM-933: ProxyMetadata doesn' t dispatch change events for its initially set inner metadata.

    Revision: 17497
    Revision: 17497
    Author:   [email protected]
    Date:     2010-08-27 09:58:09 -0700 (Fri, 27 Aug 2010)
    Log Message:
    Fix FM-933: ProxyMetadata doesn't dispatch change events for its initially set inner metadata.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-933
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/elements/LoadFromDocumentElement.as
        osmf/trunk/framework/OSMF/org/osmf/elements/ProxyElement.as
        osmf/trunk/framework/OSMF/org/osmf/elements/proxyClasses/ProxyMetadata.as
        osmf/trunk/framework/OSMFTest/org/osmf/elements/TestProxyElement.as

Maybe you are looking for