Business Connector 4.8 with Core Fix 4 or Service Release 6 ?

I want to install the Business Connector 4.8. When it´s installed should I install additional the Core Fix 4 or Service Release 6 or both?

I found the same hints but there is no information that I should implement the core fix or the patch or both.
Is it possible to implement both without error?

Similar Messages

SAP Business connector 4.6 with a ECC 6.0 Unicode

Hi,
a SAP Business connector 4.6 is compatible with a SAP ECC 6.0 Unicode ?
Regards.

Hi Ganimede,
I'm not sure if 4.6 is (should be) but 4.8 is definitely UC compatible.
Please follow these links:
[Connectors @ SAP overview page|http://service.sap.com/connectors]
[SAP Business Connector (SAP BC) Documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000719330]
Regards,
Martin Fuchs
SAP AG

Business Connector work with ECC 6.0 or have to switch over to PI - Upgrade

Hi
Client want the upgrade their current SAP system from 4.6C to ECC 6.0.
Like to know if Business Connector would work with ECC 6.0 or they have to switch over to PI.
Please Help
Thanks

i think BC will work ,
chek the below thread for
what are abaper tasks during upgrade to ECC 6.0
what are abaper tasks during upgrade to ECC 6.0?
pls reward points if helpfull
regards
kummari
Edited by: kummari on Jul 4, 2008 8:05 AM
Edited by: kummari on Jul 4, 2008 8:20 AM

Service for delete local files in Business Connector

I have used the "get" service for copy the files in the Business connector, does anybody know if there is any service for delete local files, i have seen the service for delete remote files with ftp, but i don´t know how to delete the copied files in my server.
Thanks in advance
regards

Hi Carlos,
For this issue the best choice is create your own Java Service. I attach you the Java code:
Put this code in a new Java Service
         boolean success = (new File("filename")).delete();
         if (!success) {
             // Deletion failed
   Before, you must to create an input parameter in the new service where you must to save the file path. Change Filename with the input parameter variable.
   It's not difficult.
Best Regards
Ivá

Sap_ebp Package for Business Connector 4.7

Hello together,
can anybody tell me, where I can find the Sap_ebp Package for Business Connector 4.7 and SRM 4.0?!
I have tried it with following Link
http://service.sap.com/ocs-download
but I could not find it there.
BR
Jutta

Hi Jutta,
it used to be here:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000417060&
but remember:
"For SRM 4.0 (SRM SERVER 5.0), SAP does not recommend that you use the Business Connectors in connection with Supplier Relationship Management."
quote from SAP note 856351
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Problem with Business Connector 4.8

Hi Everybody, first of all I would like to clarify that this is a question about SAP BC and NOT XI, but I did not know wherelse to put this message.
I have installed SAP BC 4.8. Created a new RFC map (SAP BC -> SAP) of a FM called Z_PO_GET_LIST.
Then went to Business Connector DEVELOPER and created an output template, XML type, for the output of the service.
When I test the service from the Business Connector SERVER it works perfect, I get as a result the desired XML with the PO Orders in the same format defined in the template.
When I test it from the Internet Explorer putting in the address bar http://localhost:5555/invoke/test/Z_PO_GET_LIST it also works great, and I get the expected XML as result.
The problem is when I try to cosume the service from an external .net application, I create an HTTP Client with all needed information (server, port, baseurl, etc) and when I send a POST to the service I get an XML with the result but NOT in the expected format (with all "value" tags instead of the tags that I defined in the template) but with this format:
<?xml version="1.0" encoding="UTF-8"?>
Values version="2.0">
<value name="serverName">IDES_SERVER</value>
<value name="$rfcname">Z_PO_GET_LIST</value>
<record name="ZPO_CABEZALES" javaclass="com.wm.util.Table">
<array name="cols" type="value" depth="1">
   <value>CO_DATE</value>
   <value>DOC_CAT</value>
   <value>CREATED_ON</value>
   <value>CREATED_BY</value>
   <value>VENDOR</value>
   <value>NAME1</value>
   <value>CURRENCY</value>
   <value>DOC_DATE</value>
   <value>TARGET_VAL</value>
</array>
<list name="rows">
   <array type="object" depth="1">
    <value>1000</value>
    <value>F</value>
    <value>2002-10-16</value>
    <value>GIESEB</value>
    <value>0000001000</value>
    <value>C.E.B.BERLIN</value>
    <value>EUR</value>
    <value>2002-10-16</value>
    <value>5000.0000</value>
   </array>
   <array type="object" depth="1">
    <value>3000</value>
    <value>F</value>
    <value>2004-05-04</value>
Does anyone please know how can I get the response from the service in the expected format (using the defined template) just in the same way I get it from the "test service" funtionality in the BC Server?
Any clue or help would be really appreciated and rewarded.
Thanks in advance,
Sebastian.

Can you post what your expected XML result looks like ? The values structure is an internal structure of how BC represents that information. What types are you passing back as output variables in your service ? A recordlist ? Is it possible that you forgot to call a service step which converts document to string (so that you get the desired XML) ?
CSY

The problem with Complex Job Manager in Business Connector.

Hi,
I have a problem with the service "Complex Job Manager" in Business Connector.
Sometimes this service hangs and a minus value (such as -83452 sec) appears in the column "Next run".
What can I improve?
I have BC ver. 4.7 with CoreFix 9, Java ver. 1.3.1 (46.0), system AIX.
Please help me.
Thanks,
Robert

Sorry, Raja.
I saw many questions about Business Connector in this category (Process Integration) and I thought that is a right place for my question.
In your opinion, where is a better place for my question?
Regards,
Robert

Problem with ELSTER and Business Connector

Hi all,
it's not really a XI Problem but I have no idea, where I could post it anyway.
For LSTA/LSTB with Elster we installed the Business Connector.
To check the settings we execute the report RPUTX7D0.
The following error message appears:
Testreport zum Überprüfen der RFC-Verbindungen zum Business Connector
Lohnsteueranmeldung
Kommunikation - Business Connector
Test HR_DE_B2A_ELSTER_GZIP   => /ELSTER/LSTB/GZIP
Test HR_DE_B2A_ELSTER_UNGZIP => /ELSTER/LSTB/UNGZIP
Teststring für GZIP und UNGZIP: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Message: java.lang.StackOverflowError
SY-SUBRC: 1
Kommunikationsfehler beim Aufruf des
Funktionsbausteins HR_DE_B2A_ELSTER_GZIP.
Ueberprüfen Sie die RFC-Verbindung HR_DE_ELSTER
und/oder die Funktion des Business Connectors.
Message: java.lang.StackOverflowError
SY-SUBRC: 1
Kommunikationsfehler beim Aufruf des
Funktionsbausteins HR_DE_B2A_ELSTER_UNGZIP.
Ueberprüfen Sie die RFC-Verbindung HR_DE_ELSTER
und/oder die Funktion des Business Connectors.
Does anybody knows why the java.lang.StackOverflowError appears?
Any ideas what I could do to solve the problem?
Many Thanks,
Mathias

Here is the right error message. Seems as if it loops..... But the question is why.
2007-07-13 13:32:03 CEST java.lang.StackOverflowError
     at java.lang.reflect.Method.invoke(Native Method)
     at com.wm.data.IDataUtil.clone(IDataUtil.java:405)
     at com.wm.lang.flow.FlowSequence.invoke(FlowSequence.java:197)
     at com.wm.lang.flow.FlowRoot.invoke(FlowRoot.java:199)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
     at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
     at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
     at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
     at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
     at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
     at com.wm.lang.flow.FlowState.step(FlowState.java:430)
     at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)

Problems with variant configuration using BAPI on Business connector

Hi every body I need help.
Steps.
1.- I created an RFC with BAPI_SALESORDER_CREATEFROMDAT2 and then a commit function,
I call this RFC via SAp business connector
Im triying to create a Configure order(With characteristics) I fill all configuration structures exactly like note 567348.
I created a sales order but when i checked ti in VA01 transaction the order quantys are diferents at configuration tables, if the function is executed on directly on SAP this work fine the error is only in a SAP Business Connector
Is necesary to send another parameter when i Execute Bapis on SAPBC?
\[removed by moderator\]
Edited by: Jan Stallkamp on Jun 27, 2008 4:21 PM

Hi,
Just debug your SAP BC service in which you are calling the RFC and check if proper values are getting mappend to your input variables of RFC.
If that is correct than there wont be much chances of problem in BC.
\[removed by moderator\]
Regards,
Siddhesh S.Tawate
Edited by: Jan Stallkamp on Jul 1, 2008 4:32 PM

Receive XML with Business Connector, convert to IDoc

Hi all,
I am trying to receive XML files with SAP Business Connector (4.7) and convert them to IDOC and then forward the IDoc file to SAP System.
At the moment, I have to do the testing for this.
I don't know how to send the XML file to the special port (5555) of the server. I read that there are serveral possibilities like http, mail, ftp. Can anybody give me an advice how this works?
Next problem is to get the created IDoc file to the SAP system. The SAP server is added in the SAP Business Connector and the connection works.
I would be very pleased if anybody could help me.
Thanks in advance!
Kai

hi,
What i understand from your scenario is XI> BC> SAP system.
1)XI-->BC
U need to configure XI's-BCAdapeter(as receiver).
in URL specify teh follwoing :
http://<hostname>:5555/invoke/folder1.folder2./<service-to-be invoked>
together with the username and password.
2) BC--> SAP
To invoke an IDoc, go to Routing rules and specify the sender, receiver, and the Message Type(IDoc name). In the next page, specify the name of the flow service to be created. and the Flowservice to be invoked whenever a message comes in.
Hope this gives you some input.
Regards,
Siva Maranani

Access Denied with Business Connector 4.7

Dear SAPiens,
I am trying to call a RFC-FM via a webservice from outside the SAP system via Business Connector 4.7. I always get a "Access Denied" Error message within the XML answer-envelope.
For testing I use the soapUI. I downloaded the WSDL from the Business Connector Developer and imported it to soapUI.
In soapUI I used the following coding for execution in a testcase:
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:mob="http://172.16.34.33/MobileDataEntry" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/">
   <soapenv:Header/>
   <soapenv:Body>
      <mob:CustomerOrderCreate soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
         <DISTR_CHAN xsi:type="xsd:string">01</DISTR_CHAN>
         <DIVISION xsi:type="xsd:string">00</DIVISION>
         <DOC_TYPE xsi:type="xsd:string">ZMDE</DOC_TYPE>
         <PARTN_NUMB xsi:type="xsd:string">0000102642</PARTN_NUMB>
         <PARTN_ROLE xsi:type="xsd:string">AG</PARTN_ROLE>
         <REQ_DATE_H xsi:type="xsd:string">20080420</REQ_DATE_H>
         <SALES_ORG xsi:type="xsd:string">4920</SALES_ORG>
         <MATERIAL xsi:type="non:MATERIAL" soapenc:arrayType="non:MATERIALArrayItem[]" xmlns:non="http://www.webMethods.com/noNamespace/"/>
         <RETURN xsi:type="non:RETURN" soapenc:arrayType="non:RETURNArrayItem[]" xmlns:non="http://www.webMethods.com/noNamespace/"/>
      </mob:CustomerOrderCreate>
   </soapenv:Body>
</soapenv:Envelope>
The given answer is:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
   <SOAP-ENV:Body>
      <SOAP-ENV:Fault>
         <faultcode>SOAP-ENV:Client</faultcode>
         <faultstring>[B2BSERV.0088.9134] Exception occurred while processing the body of the message</faultstring>
         <faultactor>http://172.16.34.33:5555/soap/rpc</faultactor>
         <detail xmlns:webM="http://www.webMethods.com/2001/10/soap/encoding">
            <webM:exception>
               <webM:className>com.wm.app.b2b.server.AccessException</webM:className>
               <webM:message xml:lang="en">[B2BSERV.0084.9004] Access Denied</webM:message>
            </webM:exception>
         </detail>
      </SOAP-ENV:Fault>
   </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I can call the function module without any problem from the Busines Connector Developer IDE.
I also can call the function without any problems in this way (by passing my credentials manually):
http://172.16.34.33:5555/invoke/MobileDataEntry/CustomerOrderCreate?DISTR_CHAN=01&DIVISION=00&DOC_TYPE=ZMDE&PARTN_NUMB=0000102642&PARTN_ROLE=AG&REQ_DATE_H=20080420&SALES_ORG=4920
Do you have any idea what is going wrong? Why do I get "Access Denied"? What causes this?
Best regards
Torsten

Hi Christian,
this solved my problem two weeks ago.
I actually run the solution with 'Anonymous' access, as I don't know how to submit the Username with soapUI (header entry does not work). soapUI is a generic SOAP testing frontend (see soapui.com).
Everything of our solution is under development at this time. I guess, that the final client service will not deal with those problems.
Nevertheless, you get the points...
Best regards
Torsten

Business Connector 4.7 connection issue with GB HMRC

Inland Revenue have changed their URL's and SAP issued a new note 1614588 for this change. As instructed in the note I installed the new package and now when we try to poll with Inland revenue we get a connection refused.
I am not too familiar with the Business connector. I have looked in the log but cannot find what URL it is trying to access. I also noticed the package in the note is exactly the same size as the old one and the files included in the package are all modified in 2006. This implies to me that nothing was changed between the old package we had and the new one. I have raised this issue with SAP but have got no response yet.
Any suggestions on how to investigate this connection refused issue?
Thanks in advance
Shamshudin

I never found and anwser to this problem, I was forced to create an webclient and exchange an XML file. Which also only worked correctly if the content-type was equal to:
ContentType = "application/x-sap.rfc; charset=UTF-8";
Hope this helps someone.
Mensaje editado por:
Fabricio Martinez

Problems with invoke call in browser (SAP Business Connector)

Hallo,
I have a problem with the invoke call in a browser to test a build flow in the SAP Business Connector:
I build a flow which receives a XML file, converts it into a record, then adds some mandatory data to the segment "EDI_DC40", then reconverts it into XML. After that, the XML gets converted into SAP IDOC format. Then I send it via ALE service to the connected SAP System.
The flow works so far if I test it with the "send XML file" function in "Test" menu. But when I test it via a call in the browser, it doesn´t work. The mandatory data in "EDI_DC40" is there, but the Business connector does not recognize the data which comes with the XML for this segment ("MESTYP" and "SNDPRN") - so it can not be transfered to the SAP system. It causes a routing rule error, because sender and message type is unknown.
Does anybody has experiences with that? Is there a difference between browser call and the test function "send xml file"?
Thanks in advance for your help!
Kai

Hi,
Just debug your SAP BC service in which you are calling the RFC and check if proper values are getting mappend to your input variables of RFC.
If that is correct than there wont be much chances of problem in BC.
\[removed by moderator\]
Regards,
Siddhesh S.Tawate
Edited by: Jan Stallkamp on Jul 1, 2008 4:32 PM

Business Connector Connection with SAP

Hi!!!
I have a XML file with 3 fields with 100 records. I have in SAP a Z table with the same fields of the XML file.
I made the mapping in SAP BC Developer. I want to put the records of the XML in the Z table of SAP. How can I configure this to SAP BC connects with SAP and fill the table?
Thanks a lot for your help!
Regards!

Hi,
This might help you
/people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/96ed2129-0b01-0010-2e91-c45e1fad0d03
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
Kumar.S

Com.wm.app.b2b.server.ServiceException with Business Connector

Hi Everybody,
I could need some help with the Business Connctor 4.8...
We just made an upgrade from SAP Business Connector 4.7 to 4.8. The new Business Connector also was moved to another server.
The installation was fine. In SM59 the RFC test works and also the MAPS are all in green status.The routing should also be fine.
I have the following problem when using the FM IDOC_INBOUND_ASYNCHRONOUS to send invoices to the customers I get the following error:
com.wm.app.b2b.server.ServiceException: com.wm.app.b2b.server.UnknownServiceException: [B2BSERV.0026.9201] Unknown service: wm.PartnerMgr.flows.MANDANT001.1STBP:INVOIC
I also created and imported the necessary certificates to communicate with our partner by https.
Please could you help? Is it a problem in the configuration or do I miss something with the certificates?
Thanks in advance!
Kind regards,
Lu Huynh

Hi Lu,
Yes that note was for SPA BC 4.7. I though it could provide you with some more insight.
Anyway, can you recheck whether the settings which you have done for IDoc in SAP BC. There might be some problem with them.
Also check this thread, it might be helpful (but i am not sure)
[B2BSERV.0026.9201] Unknown service: wm.PartnerMgr
One doubt the error message says Unknown service: wm.PartnerMgr.flows.MANDANT001.. IS the client 001?
Regards
Suraj

Business Connector 4.8 with Core Fix 4 or Service Release 6 ?

Similar Messages

Maybe you are looking for