Business Critical- Table for Wokbook saved in Roles Node Level

Hi Gurus,
We have upgraded to Nw2004s from 3.0B. One of our Role which was having several nodes and many workbooks were saved on those nodes got corrupted. As a result we dont see the node structure for that Role. Users are going to face problems to find out these workbooks as the structure is missing.
Basically we could find out the Nodes descriptions from AGR_HIERT and could find query list(RSRWBINDEX) and user names and the role name from the tables AGR_HIER and AGR_USER.
Now we have to find out which are the  workbooks saved in which Node Level for this particular Role.
Can anyone please tell us the table names or tables which is linked internally and we could identify from the link that which workbook is saved in which Node Level.
This is Business Critical issue.
Thanks in advance.
regards,
Akash

Hi Rohit,
Thanks for your reply!
The report requirement and design idea was to initially display L04 and L05 of the PC-hierarchy as this level gives a good overview of the overall costs.
We have also discussed more detailed reports where L06 and L07 are used.
The roles will be defined on the profit center hierarhcy. As of now some users should have full access, some users should have access based on node level L05 and some users based on L07. I dont have the full list of users though.
Obviously, based on your input (that the values never remain constant) I have to give the design a bit more thought as I think it will be confusing when the node levels are shifted depending on access.
But to simplify, if the access only is based on two scenarios:
1) root node (full access L00)
2) nodes on level 4 of the hierarhcy (L04)
and the report should look like
L04, L05, Amount
How can I use variables to avoid the shifting?
/Daniel

Similar Messages

  • No business partner found for ERP partner "Vendor" (role:LF)

    Dear Experts,
    When we create Inbound Delivery in ERP, it is getting distributed.
    But the IBD is not created in EWM.
    We checked in SLG1 and the deliveries were failed in the queue.
    The error message says "No business partner found for ERP partner EWM_TEST (role:LF)".
    We have maintained Business partner  and IT type = CRM004 in Identification Tab.
    Still, no idea how we can solve this issue.
    Please suggest with your valuable inputs.
    Thanks,
    Shetty

    Hi Ulf ,
    Yes i have CIF ed vendor and seems ok now , but while task creation am getting error Please refer  below screen shots and kindly guide me on error message .

  • ABAP HR- table for factory calender id at employee level..

    Hi,
    i have a requirement in which i need to retrieve Factory calender ID against holiday calender ID at employee level.
    I am able to retrieve Holiday calender ID for an employee.
    Now i need a table to where i can get factory calender for an employee against holiday calender Id.
    Appreciate your help!
    Regards
    Aleria

    Hi Aleria 
    Pass the holiday calendar retrieved to the table TFACD to get the Factory Calendar.
    Regards
    Bala

  • Table for text at header and item level.

    Hi gurus,
    I have typed some text at the item level (Texts TAB for the item). In which table can i find this data. The table STXL does not contain the data thats been entered. Please help me with some information.
    Regards,
    Udaynath.

    Uday,
    UsE Function Module READ_TEXT or  try with Table STXH..
    Reward IF THIS HELPS..
    Regds
    MM

  • Table for Cost of materials/services at level of Operation

    Hello All,
    I am trying to develop a custom report where I need to report the cost of material/services at Order operation level.
    I got the table AUFM which shows the issue of material against order.However where do I see the same against an Order and operation. How do i build that logic. I am trying to do the same for services.
    Please let me know the relevant tablles and logic to build the report.
    Thanks
    Sarang

    Hi,
    Total Actual Material Cost - Sum up the total cost ENWRT against the AUFNR in the table RESB and display in the report
    Total Actual External Service Cost - Provide the field AUFNR in the table EKKN and get the  Purchasing document field EBELN & apply this field data  in table EKPO get field NETPR and display in the out put
    For link between operation & order - Selection criterion is the order number (Field AUFNR table AUFK). The content of field AUFPL has to be used afterwards as selection criterion in the table AFVC. The selection field in this table is again AUFPL and display the field LTXA1
    Regards,
    Maheswaran.

  • Business Process Flow for old records

    A customer has asked us to decommission the Business Process Flow for a particular security role.
    I have done this and all is well for new records.
    Unfortunately the Process Bar still appears for old Leads.  I think I can understand the behaviour: if you change the process, the old records will still show process bar that existed at the time they were created.  This includes removing it presumably.
    My question is, can I remove the legacy instances of the process bar either through the interface or by code?

    Update: I created a command line to update the stageid and processid to NULL.
    These fields are now clear, however when I open an affected record the form pops up an error message:
    Unhandled Exception: System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=7.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: Cannot insert duplicate key.Detail:
    <OrganizationServiceFault xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/xrm/2011/Contracts">
    <ErrorCode>-2147220937</ErrorCode>
    <ErrorDetails xmlns:d2p1="http://schemas.datacontract.org/2004/07/System.Collections.Generic" />
    <Message>Cannot insert duplicate key.</Message>
    <Timestamp>2015-02-19T14:37:12.1391627Z</Timestamp>
    <InnerFault i:nil="true" />
    <TraceText>
    [Microsoft.Crm.ObjectModel: Microsoft.Crm.ObjectModel.GlobalActiveStagePlugin]
    [bb48066e-f22f-412f-a530-91f72e4b859b: GlobalActiveStagePlugin]
    </TraceText>
    </OrganizationServiceFault>
    I can see that the Process Bar is still showing.
    Is there something else I would need to do?
    Gordon

  • Tables for maintenance of end users in end user roles

    hi all
    i have a requirement to find out the tables involved in end user role maintenance based on the business process and step for the transaction solar02.
    thanks & regards
    srinivasulu.j

    Hi,
    As i already told you all the user names are coming from user master record which are stored in table
    USR01.
    Go to se11 enter table name USR01,and view its contents.
    Here you can get the list of all the user's present in solman server.
    normally basis team create users using pfcg or su01.
    Please reward points.

  • Logs the activities for specific critical tables

    Hi Guys,
    rec/client     Logs the activities for specific critical tables       OFF     Absence of logging of changes to critical tables in SAP could lead to unauthorized modifications being overlooked     ON
                        (Only for critical tables)     Set to ON 
    What does it mean? This is a piece of Audit Recommendation
    what to do?Please help me out.
    Itzz very urgent guys.
    Points will be rewarded.
    Warm Regards,
    Mohandoss P.
    Edited by: mohan doss on May 28, 2008 1:37 PM

    Hi,
    Parameter description :                                                                               
    This parameter is used to activate and deactivate client-dependent table logging. Depending on the setting of this parameters, certain change options are either not logged at all, or only in certain clients or in all clients. The settings for these tables in the ABAP Dictionary must be correctly set for this.
    OFF       Table logging is deactivated. No change operations are logged, even if table logging is activated for certain tables in the ABAP Dictionary.
    ALL       Table logging is activated in all clients. All change operations for tables are logged, according to the settings in the ABAP Dictionary.
    <Client1>,<Client2>,...,<ClientN> (1 <= N <= 10)                  
              Table logging is only activated for the specified clients. You can specify up to 10 different clients.                                                                  
       Caution:  Make sure there are no space characters before or after the separator ",".
             Incorrect: rec/client=001, 002 , 003
             Correct:  rec/client=001,002,003                                                                  
    Regards
    Suresh Radhakrishnan
    Edited by: Suresh Radhakrishnan on May 28, 2008 9:56 PM

  • Report Writer report required by Business Area GSBER  for table GLPCT  ECC6

    Please help,
    I have a requirement for report writer report by Business Area (GSBER) for table GLPCT.
    I am using Libruary PCA which has GSBER already activated
    In report I am able to select GSBER in General Data Selection and generate.
    However when I execute report I get error message GR410 "Characteristic GSBER cannot be combined with key figures" .
    I have looked at SAPnotes 929889 1155524 and 358251, which describes solution to add field to CCSS table (structure CCR1S) however I cannot work out what structure to change for table GLPCT used in my report.
    Steve
    Solution was to use Libruary 8A3
    Edited by: Debra Dunford on Jun 29, 2011 10:34 AM

    Hi ,
    If you are using the cube: 0FIAP_C20, then i guess you are using the standard extractor 0FI_AP_20 . One thing which i remember that there is a standard view in ECC : LFC1_AEDAT.
    This view has two tables : LFC1 and BWFI_AEDA2.
    LFC1 - Vendor master (transaction figures)
    BWFI_AEDA2 - BW FI: Log Table for Changed Transaction Figures
    This standard extractor uses table LFC1 to show vendor balances.
    And the table BWFI_AEDA2 contains the log of the changes that has taken place business area wise and account no of the vendor wise .
    Please check the view definition to confirm the same . Once you will see the joining conditions in this view you will get a clear picture of the above point .
    So for your issue, you can do datasource enhancement of 0FI_AP_20 .
    The logic will be based on LIFNR,BUKRS,GJAHR available from the datasource , fetch the business area from this view and populate it in your datasource .
    But first check in the table BWFI_AEDA2 whether for the field BWFI_AEDA2-TABNAME= lfc1 , business areas are maintained .
    Hope the above reply was helpful.
    Thanks & regards
    Edited by: DEADLOCKS on Apr 23, 2011 10:52 AM

  • Table for Role & Authorization group

    Hi Gurus,
    I am looking for a table or FM to get all roles for Authorization group.
    I tried in SUIM tcode but could not able to find exact DB table for these.
    Giri
    P.S.: To Moderator:
           My earlier thread was locked for the same question, I was searching in SDN and google from last 3 days and could not able to find enough information on it. AGR_USERS, TBRG, TACT are the tables i found. But still there is a link missed between Role & Authorization Group.

    Thomas,
    My report have selection screen with Auth group and user.
    If user provides Auth. Group then need to find all roles linked to auth group and users assigned to that role.
    In my investigation, there is link between Auth. Group <--> Auth. object.
    Also Auth. Object <--> Role.
    but still there is a fine link missing between Auth Group <--> Role.
    For Eg: Auth Object S_TABU_DIS will be associated to all Auth. Groups but assigned to only limited roles.
    I tried to debug the SUIM transaction multiple times but couldn't find the tables to find the link and not able to find the FM's.
    if anybody have any idea to find that link between Auth. Group & Role then it will be helpful....
    Giri

  • DB table for Derived Roles and Parent Roles

    Hi Expart,
    In which DB table the Derived Roles and Parent Roles are store .that is i need to find out the derived role and parent Role .i have completed the Complex and single role by table AGR_AGRS
    But i have to find out the table for Derived Role
    Plz help me to get those table
    Thanks in advance
    Tarak

    It's the same table as for the master role: AGR_DEFINE (field PARENT_AGR is filled for derived roles).
    ~As from Forum

  • Business Object Types for Z-tables

    hi
    could anyone please guide me how to create business-object-types for Z-tables?
    thanks in advance
    regards
    pavan

    Hi,
    Business objects (SWO1) are representations of business entities.
    So it is impossible to ask I need to create a business object for a z-table, because that's not business specific.
    Normally when you're faced with a BO issue, you first search for useable existing BO's. In there you also search if SAP has already provided the wanted functional requirement. If this is not present, you then search for a BO which is closest to the Functional requirement and then create a subtype of that BO en extend it to suit your needs (attributes, methods, events etc.) via delegation you can then also se it in sap standard.
    for more infor check the SAP Business Workflow

  • How to find tables for a particular business object.

    Dear Friends,
    I want to display, all the tables related to a particular business object.
    So I think there must be way of doing it using packages.
    example:-
    I will have list of all packages referencing to all business Components
    (ex.SALES) then i will get a list of all the tables related to SALES and then I would like to get all the METADATA regarding that TABLE.
    please give me some ideas How to achieve this.
    thanks,
    jeevan

    hai Naveen ,
    Thanks for the reply.
    I had gone through the Link.
    I want to know "How could I get the list of all the Tables of a particular Business Component"
    like suppose i entered Sales i sould get all the tables related to Sales ....if  MM then list of MM tables...
    in Se80 the package VA is for sales .....
    and there i can get all the tables for sales...
    but If u know any searching criteria by which i will be able to the list of tables.
    thx,
    jeevan

  • Table for role description

    Hello All
    I can't find the right table for role description.
    Can someone tell me the table name showing role description ?
    Thanks &
    Regards
    CB

    I've finally find it, it's AGR_TEXTS

  • Table for Business Partner Marketing Attribute

    What is table for Business Partner Marketing Attributes and Attribute Set .

    Anup,
    Ok you have BP Guid. You goto table AUSP and enter the PARTNER_GUID = BP GUID and check contents. Here you will get all the attribute list (field ATINN) and corresponding values of attributes (field ATNAM). But here in this table u will find ATINN in form of number; using that number you can find corresponding attribute name in field ATNAM of table CABN where ATINN = ATINN  u got in the AUSP for each attribute rows.
    Thanks,
    RR

Maybe you are looking for