Business Objects changes forward slashes to backward slashes.

When a report failed to run I saw this error: u201Cdestination file error. CrystalEnterprise.DiskUnmanaged:u201D; then I noticed that every time I entered the path into the directory text box, in the destination section of the scheduling page it would change the forward slashes to back slashes.
e.g.
changes something like this:
+
example\example\example\example\example\report.xls+
to this:
//example/example/example/example/example/report.xls
Does anyone have any idea why? I have been searching for an answer, but canu2019t find it.
Thanks

The UNC path is automatically converted to forward slashes. Can you verify please that you start the job server with a domain or local user account that has access to the network and rights to access the folder/share? I f you encounter further issues clear your logging folder and activate the trace for the jobserver by adding -trace to the end of the command line in your your ccm.
Regards,
Tim

Similar Messages

CrystalReport into Business Objects - Change default name when saving

Hello everyone,
i'm asking a question here because I don't know anywhere else people who have sufficient skill to answer.
I hope the thread is posted in the right section, if not, sorry and please move it where it belongs.
I'll try to simply explain my problem.
I have Business Objects XI 3.1 enterprise and i use InfoView to open a CrystalReport report.
When I export it, (the extension does not matter) the location window opens and the default name is CrystalReportViewer.xxx .
What I need is to not show to the customer the default name but the name of the report itself.
Anyone has an idea?
Thank you a lot!
Cric

We have a similar request for our companies deployment. Unfortunately I found that this is normal behavior for the application and that an enhancement request has already been opened (ADAPT01550068).
SAP note 1491438 can provide you with additional information. Hope this helps.
Edited by: Rodney Barrera on Feb 17, 2012 5:11 PM

Use of identifier in ByD Studio business objects

As Wed Feb 2nd in VQ3), we introduced a new identifier data type for partner BOs.
ByD Studio contains 2 identifier:
element ID                 : ID;                  // identifier 2 (SAP "best practiceu201D)
element Identifier   : Identifier;           // identifier 1 (u201CCCTS compliant")
As the CCTS-complient data type u201CIdentifieru201D has various difficulties, we recommend urgently to use the data type "ID". The differences between the two data types is explained below:
1. Length
The DT Identifier has a length of 255 char.
The DT ID has a length of 60 char.
2. Upper case conversion
The DT ID supports upper case only. User entries with lower case characters are automatically converted to upper case. This is the same behavior as almost all ByD identifier data types (e.g. BusinessTransactionDocumentID, ProductID, BusinessPartnerID, etc.)
The DT Identifier supports lower case letters as well.
3. Alpha conversion
The DT ID supports alpha conversion. User entries which contain number characters only are filled with zeros from the left side (leading zeros). On the UI the leading zeros are suppressed automatically. This is the same behavior as almost all ByD identifier data types (e.g. BusinessTransactionDocumentID, ProductID, BusinessPartnerID, etc.) The DT Identifier does not support alpha conversion. This leads to an u201Cunexpectedu201D sort order on the UI.
This leads to the following sort behavior:
Sort order ID     Sort order Identifier:
.1.1                           .1.1
1                            1
5                            1.1
10                            10
15                            100
50                            15
100                            5
1.1                            50
ABC                            abc
(no lower case)       ABC
4. Structure
The ID data type is flat. There is no need for the u201C.Contentu201D suffix any longer.
The Identifier data type is structured (contains supplementary components), so the u201C.Contentu201D suffix is needed (although the supplementary components are disabled in the BO).
5. Behavior in ByD script coding:
The following coding works fine:
import ABSL;
var x = 1;
if (this.ID == "") {
// is true if ID is initial
this.ID = x.ToString();
this.ID = "1";
if (this.ID == "1") {
// is does not work, because u201C1u201D was filled with leading zeros
if (this.ID == "000000000000000000000000000000000000000000000000000000000001") {
// is true now because u201C1u201D was filled with leading zeros
raise IDMessage.Create("I", this.ID);
// leading zeros are suppressed on the UI: u201CID: 1u201D
6. Restrictions in Extensibility and Analytics:
Only the ID data type will be supported in extensibility and analytics:
Extensibility: It will be possible to add an extension field in an BO extension (planned for FP3.0).
element ID                 : ID;
Analytics: Analytics supports only character fields with a maximum length of 60 characters & alpha conversion.
Consequence: the u201CIdentifieru201D DT cannot be used in Extensibility and Analytics.
7. Adoption
If you have used the data type "Identifier" before and want to change the BO to "ID", the following adoption tasks are necessary:
a)     Business Object: change the BO definition file (see point 1)
Note: During my tests I got a activation error. In this case I solved the problem by Clean -> Save -> Activate. In this case, test data are lost
b)     Business Object: Implementation: remove the u201C.Contentu201D suffix
c)     UI: After the BO change, the following runtime error occurs in the affected UI. In the error text the following text occurs: u201CMapping of proxy name of attribute failed.u201D
Solution: Open the UI Designer,
(1)     Tools -> Update Meta Data
(2)     Go to the data model and do u201CUnbindu201D and u201CBindu201D again for the affected field
(3)     Save & Activate
d)     MDAV, Forms, Web services -> not analyzed. Assumption here is that the dependent objects have to be cleaned and activated.

OK, I have found your code in your previous post.
It works in 9.2.0.1.0 and 8.1.7.0.0.
SQL> CREATE OR REPLACE TYPE t_assoc_agents_address AS OBJECT
2 (V_CONTACT_NAME VARCHAR2(120),
3 V_ADDRTYPE VARCHAR2(80),
4 V_ADDRESS_LINE1 VARCHAR2(50),
5 V_ADDRESS_LINE2 VARCHAR2(50),
6 V_ADDRESS_LINE3 VARCHAR2(50),
7 V_CITY_STATE_ZIP VARCHAR2(100),
8 V_PHONE VARCHAR2(50),
9 V_ADDRESS_FAX VARCHAR2(30),
10 V_ADDRESS_EMAIL VARCHAR2(80)
11 )
12 /
&nbsp
Type created.
&nbsp
SQL> CREATE OR REPLACE TYPE nt_assoc_agents_address AS TABLE OF t_assoc_agents_address
2 /
&nbsp
Type created.
&nbsp
SQL> var c refcursor
SQL> col v_address_fax format a15
SQL> col v_address_email format a15
SQL> declare
2   lv_assoc_agents_add_out nt_assoc_agents_address
3   := nt_assoc_agents_address(
4     t_assoc_agents_address(null,null,null,null,null,null,null,
5     'New Fax', 'New Mail')
6   );
7 begin
8   open :c for select V_ADDRESS_FAX,V_ADDRESS_EMAIL from
9   table(cast(lv_assoc_agents_add_out as nt_assoc_agents_address));
10 end;
11 /
&nbsp
PL/SQL procedure successfully completed.
&nbsp
SQL> print c
&nbsp
V_ADDRESS_FAX   V_ADDRESS_EMAIL
New Fax         New MailWhat is your Oracle release and how are you using ref cursor (if I interpret your example right) ?
Rgds.

Business Object export file is UTF-8 Code

recently, we updated our business objects and found all the reports export from business objects will have 3 extra characters in the front of the first row in the Csv file, however our client's Linux system does not recognize these 3 code (EF BB BF), does any one know how to export file from business object change to regular code like ANSI code?

Hello Cleo,
I'm assuming you're using Desktop Intelligence documents - (BusinessObjects Full Client), and that this happens with CSV and text exports.
Would this be correct?
If so, I can move this over to the Desktop Intelligence forum.
Sincerely,
Ted Ueda

HT203167 the path for several of my songs that i can't locate is wrong because the path uses forward slashes instead of back slashes. Can I change this?

several of my songs in itunes gives me the can't locate ! sign. in going to the info for each of those songs i noticed the path to locate the file was in proper format except for the slash marks which were / instead of \ . how can i change the slash makrs in the paths for those songs?

thanks for the info. if itunes is applying the wrong path i.e. - forward slashes in path instead of backward slash how will i ever access those songs I've purchased. it won't let me download them again because it thinks they are on my computer?

Forward slash vs backward slash

Hi ,
I have a hava class which runs fine on windows .It refers to file on windows as
SYSTEMVARIABLE\Y.TXT
this SYSTEMVARIABLE exist in windows and ulinux
so in windows i have somthing like
SYSTEMVARIABLE=c:\project
and
on linux
SYSTEMVARIABLE=\root\project
how do i make this class to run on both windows and unix
do i ahve to change \ to / and compile again
can a same class works on both os

i for one, think that the forward slash would total
kick backward slash's ass in a fight.Let's try shall we, since both are here already?
See them eye each other:
/ \Now they're testing their strength:
/ \Oh, looks like an early end to that fight: Forward slash was actually a semi-colon in drag, causing backslash to faint:
; _

My forward slash key doesn't work, however the question mark button does can i change this?

The forward slash key doesn't work on the keyboard, however when pressing shift it works for a question mark. Is there anyway of fixing this?

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(65512)

When typing an 'L' followed by forward slash '/' I get a weird character

I can't figure this out. whenever I type a string of text that requires an L and forward slash together I get some weird character that resembles an 'f' like for designating a 'function' in an equation only its backwards. this occurs in terminal, like in this example: cd /usr/local/name the 'l' at the end of local and the forward slash become one character. I can't duplicate this character any other time, just when l/ are in a string. Any ideas? I get this in terminal and entourage (only in plain text mode - html emails the character doesn't show) mainly.

What you are seeing is a diacritic of an L with a line through it. It does the same for o/. You are probably using a font like Palantino, Hoefler, Chicago, or New York.
I don’t use Terminal so I don’t know how to change it in that application, but in TextEdit
1. open the Font panel (Format/Fonts/Show Fonts, or Command-t)
2. from the Action menu (small gear shape in lower left corner) choose Typography
3. in the Typography window select the Diacritics section (if there is no Diacritics, select in the Fonts panel one of the fonts mentioned above, like Chicago and the Typography window will change to show a Diacritics panel)
4. click Don’t Compose Diacritics button
I couldn’t find a Show Fonts command in Terminal, but now that you know the procedure, maybe you can figure it out.

How to use EWS or Powershell to rename all folders that have a forward slash in them

We have many users that have created folders in Outlook that have forward slashes in the name (i.e. / ). They did this in Outlook/Exchange 2003. We upgraded to Outlook 2010 and this is no longer aloud so there are issues with the folders when performing
functions such as trying to share or using IMAP, etc.
I'm looking for a way to specify a particular user's mailbox in a script and have it traverse every folder/subfolder and check if there is a forward slash in the name. If there is a forward slash I would like to rename the folder to something like the bar
character (i.e |) or another character that is valid.
I had most users go through Outlook manually and clean them up. However there are a handful of users that have hundreds if not thousands of subfolders that have the forward slash in them.
I've done extensive research on this (references to my research below) and came close in putting a script together but I just can't figure it out. Anyone have an example for this? Even if I need to specify a folder within the Inbox and have the script only
process subfolders from this location would be acceptable since most of them are subfolders of a particular folder.
Thank you.
http://social.technet.microsoft.com/Forums/exchange/en-US/b24d0558-ed6a-4854-9a86-e9815741b5d0/rename-folder-example-in-ews?forum=exchangesvrdevelopment
http://exchange-powershell.com/database-management/bulk-public-folder-rename-and-cleanup-script/
http://unlockpowershell.wordpress.com/2010/10/14/powershell-rename-a-mailbox-folder-using-exchange-web-services-api/

First two articles are for public folders so it won't help here as you have mailbox folders...
http://unlockpowershell.wordpress.com/2010/10/14/powershell-rename-a-mailbox-folder-using-exchange-web-services-api/
This is good starting point, you might need to change the logics around it to search / and replace with - or someting, this might be the code change needed from that article but would suggest you to test it first.
foreach ($folder in $ffResponse.Folders)
if ($folder.Displayname -like “*/*”)
Write-Output “Found / in the $mailboxName and folder name is $folder.Displayname”
$folder.Displayname.Replace("/","-")
$folder.Update()
Blog |
Get Your Exchange Powershell Tip of the Day from here

Underscore randomly replaces forward slash in topic file names and topic titles

The problem I'm seeing is similar to the discussion at http://forums.adobe.com/message/2564701 which dealt with random insertion of underscores in topic titles. That problem seemed restricted to underscores replacing spaces in Topic File names and was solved (for some people at least) by deselecting the setting "Tools > Options > General > Use underscores in filenames." Playing with that setting has not worked for me when it comes to unwanted replacement of forward slashes.
I'm running RoboHelp 9 and linking from FrameMaker 10. The unwanted underscores are seen in (1) the RH project and (2) the help output:
(1) In RH project in some topic titles like this:
I want to keep the forward slash. The upper topic title is wrong and the bottom one is correct.
(2) In AIR Help output: search results and in the tab that appears above the breadcrumbs in the main right pane.
I cant change the titles prior to generating output because, as Matt Sullivan wrote in the similar discussion, "...for topics created from linked FrameMaker 9 files, the Topic Title is not editable from the Topic Properties. If it was, at least I could change the offending titles prior to final generation of output. (though the titles would revert on the next update of the FrameMaker source content)."
I've double-checked the source FrameMaker documents and I can find no difference between Headings in which the forward slash is retained (desired) and those in which the forward slash is replaced by an underscore (unwanted). Has anyone else seen this?
Thanks,
Matt

Isn't the issue here that RH is creating filenames AND topic titles based on the FM title. Because of the slash it is saying that is an illegal character it changes the filename and the title in RH is based on that, hence both change.
I don't know if that can be changed but now you can test to see if that is what is happening.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Problem importing a CSV file with forward slashes in a column

I have an Excel csv file of a product database (contains about 6500 products) that contains product codes with forward slahes such as 499/1, 499/3, 499/5.
These are different sizes of a product and as such have different prices etc.
When I import the file into Numbers these numbers appear as 499, 166 1/3, and 99 4/5 respectively.
What seems to be happening is that Numbers is interpreting the forward slash (/) as a divide by command and subsequently performing a calculation on that number on import and hence totally changing the value of the cell so that it is impossible to look up the price related to a product as the product code no longer exists.
Excel can import these files with no problems, why can't Numbers treat each cell as text and leave it alone on import.
Is there any way round this or do I have to revert to using Excel for the import of csv files.
Thanks
Steve

I know I'm a bit(!) late (a year) coming to this party, but there is a simple solution, that worked for me, enclose the field in double quotes, and add a single quote before the number:
Instead of
499/1,"Super Widget 3",12.34
do
"'499/1","Super Widget 3",12.34
In fact the single (unclosed) quote without double-quotes works as well:
'499/1,"Super Widget 3",12.34
I've always found it better to enclose strings with double quotes. This works on loading the file into Mac Numbers and should work with Excel too if that helps. It opens with OpenOffice 4 on the Mac too - if you select "comma" in the "Separated by" checkbox
I can't remember where I picked this info up....
Hope this helps someone, albeit late.
Andy

Dreamweaver 8 is removing forward slash when creating pages

Dreamweaver 8
Links set to be relative to Site Root
If I create a template that has ../index.php as the home link, and also create a few pages from that template, the links on those pages all start with a forward slash:
/stuff/
However, if I then change the template to have a home link like this:
and then save, all the links in the already-built pages suddenly lose their site-root forward slash and instead look like this:
stuff/
and the home link now looks like this in the created pages:
../ (yep, it stays like that)
I did not change links to be relative to document
Hmmmmm.....I'm noticing that it's occurring when I edit the template, when you then save the edited template, it updates all the pages made with that template but then all the links are now without the front forward slash, so it looks like this is getting triggered when the template is edited
It doesn't change how the links are in the template ../whatever, but all the updated links in the built pages now do not have a front forward slash
And once it changes to the non-forward slash version, it never goes back, it stays as link/
Does anyone know what might be wrong? I need all the links to stay as /relative-to-site-root/
Thanks

> Does anyone know of a setting or fix for this problem
It was regarded as a bug in previous versions, and was fixed
in the 8.0.2
release. In normal circumstances, ALL links in a template
file must be
relative to the template document, not relative to where you
intend to save
the child pages. Thus, there would be no way to have a link
in your
template document like the first one you show, e.g.,
<img src="whatever.png"....
*unless* the file was actually in the Templates folder (a bad
idea).
In 8.0.2, you can set your PREFERENCES for the Templates
category to NOT
MANAGE relative links. Be aware that this may have unintended
consequences
for you - specifically regarding other relative links in your
site.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pgs_it" <[email protected]> wrote in
message
news:eivj88$361$[email protected]..
> When creating new pages from templates in Dreamweaver
8(Ver 8.0.2). The
> full
> path for images is not created
> i.e. in template the code is <img
src="main_page_logo.png" width="814"
> height="172" longdesc="Main Page Logo" />
> In the new file the code should be :-
> <img src="../../Templates/main_page_logo.png"
width="814" height="172"
> longdesc="Main Page Logo" />
> but only :-
> <img src="main_page_logo.png" width="814"
height="172" longdesc="Main Page
> Logo" /> is in the code.
> but this does work in Version 8.0.
> Does anyone know of a setting or fix for this problem
>
>
>

File Open Dialogue has forward slash and starts up on A: drive.

2.1.1.64
This is minor but bothers me each time I click file open.
Click File -> Open
File open dialogue appears.
SQL Developer tells me my A: drive is not accessabile after my A: hard drive makes a grinding noise. I almost forgot that little bit of info since I have not used the A: drive since around the year 2000. :)
SQL Developer puts a "/" forward slash in the file name box. Why?
I have to press OK.
Then navigate to the C: drive or another drive.
Why does SQL developer want to open the A: drive and not go to a more likely drive like say C:? Then there would be no message and no having to click OK? My recommendation is that SQL Developer File Open dialogue start up on the C: drive or at least just show the directory structure and not make me click anything. Remove the forward slash from the filename field also.

At first this seemed to work. SQLDev would startup and open a file for me from the r:\ drive in its own tab that I was previously editing in a prior session. File->open would startup on the R:\ drive. However, with no file in its own tab on startup no matter what AddVMOption I put in the sqldeveloper.conf file from the link provided SQLDev starts up on the a:\ drive? Changing the "start in" dir on the icon on my desktop had no affect either.

ADAM, LDAPContext Container Name with Forward Slash

Hi,
I am having trouble writing some Java code, which will create a container/folder in ADAM, where the container name and distinughed name contain a forward slash.
e.g.
cn=test/test
dn=CN=test/test,CN=TestStore,DC=MyCompany,DC=COM
LdapContext _ctx = getNewContext(valid_userName, valid_userName, valid_userName);
// uses InitialLdapContext under the hood
String containerDN = "dn=CN=test/test,CN=TestStore,DC=MyCompany,DC=COM"
_ctx.createSubcontext(containerDN, attrs); // assume attrs is valid javax.naming.directory.AttributesI am struggling to escpae the forward slash from the Java String object, and yet allow the InitialLdapContext to create the container with the name.
From the ADAM Adsi Edit application, I can create folders with forward slashes, so I presume the process can be done from code as well.
Many thanks in advance ...

Create a Name rather than passing a String.

EA2 - Export Wizard - No forward slash after package spec and body in sql

I exported a schema with the export wizard. My stand alone functions and sql types in the script have have a forward slash after the "end;" statement Great. However, package specs and body create statements do not have a forward slash after the "end;" and I believe they also should have this.

This appears to be a DB issue as we are just using DBMS_METADATA to generate the ddl. Please test manually using worksheet or sqlplus
exec DBMS_METADATA.SET_TRANSFORM_PARAM( DBMS_METADATA.SESSION_TRANSFORM, 'SQLTERMINATOR' , TRUE );
select dbms_metadata.get_ddl('PACKAGE', 'PACKAGE_NAME','SCHEMA') from dual;
I looked through the DB bugs briefly and noticed a few on other objects that were fixed in 9.2.0.6 but I didn't see one for Packages...
This is not something I would fix in SQL Developer as the core issue is with DBMS_MEATADATA and your version of the DB.
As this is fixed in 10 I'm sure you can work with support and request a backport if it's not a currently available patch.

Business Objects changes forward slashes to backward slashes.

Similar Messages

Maybe you are looking for