Business scenarios for daily, weekly and nightly loads!!

Can any body tell some Business scenarios for daily, weekly and nightly loads where we monitor the loads in Production support.
Regards
srikanth.ch

Hi,
It all depends on your business needs. In general on daily basis you will load the SD and MM which will cover all the stock and sales done for day. Generally most of the clients use Lo Cockpit extraction for both the modules. FI chains will run on month end for example the AP(Accounts Payable),AR(Accounts Receivable) chains will be run on the month end.
Some SD datasources : 2lis_13_vdhdr, 2lis_13_vditm, 2lis_13_vdkon - all these to pull billing related data
Some MM Datasource : 2lis_03_bx and 2lis_03_bf.
Regards,
Harish Raju

Similar Messages

  • Business Scenario for BPA, CPA and PPO

    Hi All,
    can you please give some business example(scenario) where you are actually using the following ?
    1) Business Purchase Agreement - BPA
    2) Planned Purchase Order - PPO
    3) Contract Purchase Agreement - CPA.
    i am trying to see what are benifits of CPA or PPO against BPA. with actual scenarios
    Thanks in advance
    Prashant Pathak

    I think, you should have raised this query under 'Finance' or 'Order Management' :-)

  • Daily,weekly and monthly report format

    hi
       i  was asked to create a format for daily, weekly and monthly system performance report .. can anyone send me  sample report format..

    Hi Sandy,
    System Performance is always checked by a list of our lovely transactions in BASIS I generally had created one for my self and keep a track of performance..
    IT goes like this..
    Daily : DB12(Check Backup Logs);SM51(Check serv are UP);RZ20(Look for ALerts); SM13;SM21;SM37(check for cancelled jobs);SM12; st22 (dumps); ST02; SM35; SP01 (Spool jobs for more time); AL02; ST04; AL16.
    Weekly : DB12; DB02; SAPDBA checks ; DB drives and space;  EWA report of the past week.
    Monthly : More or less the same stuff of Weekly  with Archive files as well ...and SAPDBA cleanup logs... Monitor the DB growth and check for the backup logs...
    Hopefully this info shd help yoiu in this regard.
    Please award suitable points for the post.
    Br,
    Sri

  • Defining business scenarios for tha master data components

    Hi Friends
    How to define business scenarios and rules for each of the master data components?
    plz reply me
    thanks in advance

    Hi Venkata Ramana
    Good question...
    You can use standart mdm business scenario for master data(and business process) management
    For mdm 5.5
    https://websmp201.sap-ag.de/~sapidb/011000358700001119842007E
    https://websmp201.sap-ag.de/~sapidb/011000358700001119482007E
    https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1035773
    https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1252846
    https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1252884
    https://websmp201.sap-ag.de/~sapidb/011000358700001119642007E
    https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1252883
    https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1255401
    https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1268212
    For mdm 7.1
    SAP MDM Business Content
    moreover you can use standart business scenarios as basis for build business process management in your company
    Regards
    Kanstantsin

  • How to get data for current week and previous week using customer exit in Bex.

    Hi everyone,
    I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using  Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
    Thanks in Advance,
    G S Ramanjaneyulu.

    Hi krishna,
    Thanks for your quick reply, can you have a look at my code,
    case i_vnam.
    WHEN 'ZPWK_CWK'.
    ranges : pre_week for sy-datum.
    data : start_date type DATS,
           end_date TYPE dats .
    ************FM TO GET FIRST DATE OF CURRENT WEEK ************************
    CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
      EXPORTING
        DATE_IN  = sy-datum
      IMPORTING
        DATE_OUT = start_date.   " WEEK FIRST DATE
    end_date = START_DATE + 6.   " WEEK LAST DATE
    END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
    START_DATE = START_DATE - 7.   " PREVIOUS WEEK START  DATE
    **********PREVIOUS WEEK DATES IN PRE_WEEK******************
    pre_week-SIGN   = 'I'.
    pre_week-option = 'BT'.
    pre_week-LOW    = START_DATE.
    pre_week-HIGH   = END_DATE.
    APPEND  pre_week.
    CLEAR : START_DATE,END_DATE.
    endcase.
    Regards,
    G S Ramanjaneyulu.

  • The daily, weekly, and monthly maintanence scripts

    Hello All,
    I have a power mac G4 Digital Audio at 733mhz, my question is why am I not seeing the automatic maintanence scripts coming on at 3am in the morning? I am usually up on my computer at those times, but still have yet to see the system go into automatic maintanence scripts at that time of the morning? Is there something wrong with my configuration file for the scripts, or is there something I need to do in order for it to work?
    Nadav

    Hiya,
    Just a quick check: have you looked in /var/log/daily.out to see if the daily jobs are outputting anything to the logs, or maybe that's what you're talking about? Nothing logged?
    Um, if there's nothing in the log, then you may have a /etc/daily.local file overriding the default script in /etc/periodic/daily in someway. A quick check of /etc/periodic/daily/500.daily may prove helpful. It should be doing all it's normal log rotations and jazz... If the file looks normal (not corrupted or just blank say) maybe try putting a little command to write something to /var/log/daily.out to tell yourself it's working like (you'll need to sudo this):
    echo "this is daily.out working like a champ"
    or whatever. Same thing for the weekly and monthly scripts...
    If you've done all this already and haven't looked yet, check out the manual pages for periodic, periodic.conf, cron, crontab, and so forth...maybe there's some goofy setting hosing things somewhere.
    Hope that helps!

  • Daily, weekly and monthly acitivities in Oracle EBS 11i

    Hi All,
    I need to know the daily, weekly and monthly maintainance activities for Oracle EBS 11i .
    tq

    user_exit wrote:
    Hi All,
    I need to know the daily, weekly and monthly maintainance activities for Oracle EBS 11i .
    tqthis is not forum for EBS, so please post in
    General EBS Discussion
    Thanks

  • Business scenarios for Production support !!!

    Dear experts,
    i have conceptual knowledge on Production support so can any body tell about some Business scenarios for Production support like frequent failures of infopackages, loads..etc.
    can any body tell the regular activities of Production support people.
    Thanks
    Regards,
    srikanth.ch

    Hi,
    Please search the forum. You'll get a lot of good material on Production Support activities. This topic has been discussed in detail on the forums.
    Cheers,
    Kedar

  • Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

    Hi,
    I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
    Has any other user had such a problem, and if so, how did they rectify it.
    Any advice would be greatly appreciated.
    Thanks in advance.
    clarinet99

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

    I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
    Regards
    Raghavendar

    Hi Raghavendar,
    Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
    1. In Outlook, click the File tab, click Options, and then click
    Add-Ins.
    2. Please take one of the following actions:
    If the add-in is in the Inactive Application Add-ins list, follow these steps:
    a. In the Manage drop-down list at the bottom of the dialog box, click
    COM Add-ins, and then click Go.
    b. Click to select the check box next to the add-in, and then click OK.
    The New Online Meeting button should now be available in
    Calendar View, and the Online Meeting button should be available when you create a new calendar item.
    If the add-in is in the Disabled Application add-ins list, follow these steps:
    a. In the Manage drop-down list at the bottom of the dialog box, click
    Disabled Items, and then click Go.
    b. Select the add-in, and then click Enable.
    c. Restart Outlook, and then verify that the add-in is displayed in the
    Add-ins dialog box.
    The New Online Meeting button should now be available in
    Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
    3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • I have a Windows 8.1 and it's even running slow.  I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what....

    I have a Windows 8.1 and it's even running slow.  I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what.
    The tools are not responding when I try to use them.  Some of them work sometimes, but not others and some don't work at all.  I'm in a design class online and I need these tools desperately.  I have an assignment due Monday and I'm losing the whole weekend because Tech Support is only open M-F!
    Any help anyone can give me will be appreciated.
    Thanks,
    Rose Ireland

    Maybe these links provide some pertinent information.
    Optimize performance | Photoshop CS4, CS5, CS6, CC
    Photoshop: Basic Troubleshooting steps to fix most issues

  • My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

    My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

    but could not identified properly
    Please clairify.
    charging for a week and still hasn't come to a full charged
    Sounds like you need a new battery.  Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.
    iPod Repair Pricing

  • My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi.  Now it is no longer working?  Any ideas?

    My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi.  Now it is no longer working?  Any ideas?

    Basic Troubleshooting Steps when all else fails
    Quit the App by opening multi-tasking bar, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.
    Relaunch the App and try again.
    Restart the device. http://support.apple.com/kb/ht1430
    Reset the device. (Same article as above.)
    Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it required a pc.As I didn't have access to a pc it wouldn't work is there any way to do this without a pc?

    Hi, I'm new at this but I am hoping someone can help me.I have recently been away for 5 weeks and my Tom Tom required updating.When I clicked to update it, it required a pc. As I didn't have access to a pc it wouldn't work is there any way to do this without a pc?  I was without this app for 3 weeks!  Thanks, Lea

    The process to update your Tom Tom is a big data file, you will need to be connected to a Wi-Fi network for it to download.  If will take about an hour. 

  • How can I get my ipod nano (6th gen) to stop making a static-y noise when I try to listen to my music? It has been doing this for a week and the music is faint while the static is louder than it.

    It has been doing this for a week and the music is faint while the static is louder than it. I try plugging it in to my iTunes and when I un-plug it, it still makes the loud static noise. I have also tried tapping my knuckle on the back of my ipod nano. This has not damaged it at all nor caused this to my ipod. There is no water damage to the ipod. Only a few scratches from a couple drops. The drops have been on concrete but not at a very high distance. How to I stop this? Do I need to replace my ipod instead?

    Have you tried a different pair of earbuds/headphones to rule out a pair of damaged/faulty ones?  You might also want to make sure the headphones are securely and firmly seated in Nano's headphone jack.  Lastly, check the headphone jack for any signs of debris or damage.  You may need to have the headphone jack replaced either by Apple or a third party repair company.
    I assume this static is present on any track you listen to versus only particular ones?
    B-rock

Maybe you are looking for